Personal domain for one site but not another

Hope someone can help. I have my family site set up through iWeb on Mobile me. I would like to create a "new" site that would be for a group I am involved in and for which I have obtained a personal domain name. I would like to know if the personal domain name can be used for the "new" site and not for my family site. I have tried to "add new site", put in the personal domain name, but then when I look at the bottom of the screen it shows my mobileme account name and then in parens it shows the personal domain name on both my family site and the "new" site.
Hope someone knows something about this! Thanks!

Yes, you can change the URL for the domain name. I suggest you split the domain file. I use iWebSites to manage multiple sites.. It lets me create multiple sites and multiple domain files.
If you have multiple sites in one domain file here's the workflow I used to split them into individual site files with iWebSites. Be sure to make a backup copy of your original Domain.sites files before starting the splitting process.
This lets me edit several sites and only republish the one I want.
Once you get the two sites published separately you should be able to go in and change the CNAME to the URL of the site you want.
OT

Similar Messages

After installing Mountain Lion, why is there Yahoo access for one user but not another?--both are administrators.

After installing Mountain Lion, why is there Yahoo access for one user but not another?--both are administrators.

We've had several instances where we have had to run chkdsk on arrays with over 1m files. Average completion time is approximately 72 hours. The maximum downtime window they have available is the 64 hour weekend window. File sizes and number of files were
much smaller then than they are now.
The idea, in theory, was to use VHDs to compartmentalize the data into smaller volumes which could be more easily managed. It would also improve performance when transferring these compartments of data as they would use sequential read/write rather than
fragmented/random. This idea was never fleshed out in entirety, they don't split data up into little containers, but simply into big ones per project. Hence the 11m files in one container that I am currently trying to diagnose.
Some other important facts: The VHD in question is mounted in B:/project/ as this server also allows remote workers to log in, but they are restricted to see only data in E:. Disks A-D are hidden via group policy.
Update: icacls is failing on a large number of files within this dataset. I counted the path characters to ensure it wasn't the 255 character limit I was encountering and verified that the paths being blocked are only about 150 characters long. Once it finishes,
I'll have to try taking ownership and then re-running it. At this point I still have no idea how long to expect. I'm running out of time as the environment will be in use again at 9AM tomorrow morning.

Firefox crashes on start up for one user but not another

Crash ID: bp-df3a48d7-363c-4d2f-87d3-f73902140723
Version: 31
Crashes on start up for one user but not another. Both are administrators.
I have uninstalled and re-installed. No change with each user.
Crashes in safe mode as well (holding down shift)
No addons present in other user.
Have ran Malwarebytes and cleaned
Have ran CCCleaner and cleane all including registry entries with Firefox uninstalled.

Create a new profile as a test to check if your current profile is causing the problems. <br>
See '''Creating a profile''':
*https://support.mozilla.org/kb/profile-manager-create-and-remove-firefox-profiles
*http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Profile_issues
If the new profile works then you can transfer files from a previously used profile to the new profile, but be cautious not to copy corrupted files to avoid carrying over the problem <br>
'''Profile Backup and Restore'''
*http://kb.mozillazine.org/Profile_backup
*https://support.mozilla.org/en-US/kb/back-and-restore-information-firefox-profiles
*http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

Safari works for one user but not another on same computer

MacBook with multiple user accounts. Safari (and Firefox) work fine for one user but are unable to open web pages when the other user is logged in. The error in Safar is "Safari can't open the page "http://xxxxxxxxx/" because it could not connect to the server "/xxxxxxx/" . DNS is working for this user. I am able to ping any number of sites from Terminal. Network Preference pane is configured to not require any proxy. This is a case of it was working but now it's not.
Can anybody help with this? I know I can fix this by simply creating another user and transfering the affected user's data to the new account but I would rather not. TIA

HI Bob,
You can test your settings by clicking the big "Test My DNS" button at <https://www.dns-oarc.net/oarc/services/dnsentropy>. If you see "Poor" on any of the tests, don't use that domain name server! Remove it from Apple Menu => System Preferences =>Network =>DNS Servers or similar location in your router if you've got a 'home network'. If all you have is "poor" DNS servers in your list, call your ISP and insist that they give you the address of a name server which is protected against the recently exposed DNS cache-poisoning threat.
Also, open System Preferences/Network. Click the DNS tab. Add these numbers in the DNS Servers box.
208.67.222.222
208.67.220.220
See if that helps.
Carolyn

IPhoto 08 imported for one user but not another

We have iPhoto '08 ver 7.1.5 and it worked fine with my login. I could import photos from our Canon PowerShot SD960 into my iPhoto library. But when my wife logged in and tried to import the same photos she got a message stating "Unreadable Files" and "the following file could not be imported".
On her login using Image Capture, she could import the pictures off the camera and save them to her Desktop then she could view and also save them using Preview and could also import them to her iPhoto library from the Desktop folder she had saved them into.
I reformatted the camera's card and I also used iPhoto Library Manager and rebuilt her Library.
We can now both import pictures fine but I'm wondering for how long this will be the case.
Same exact situation existed with another camera we have - it worked for me but not for her.
Just curious to know what the cause might have been in case it's something we are doing that is causing the issue.

HI Bob,
You can test your settings by clicking the big "Test My DNS" button at <https://www.dns-oarc.net/oarc/services/dnsentropy>. If you see "Poor" on any of the tests, don't use that domain name server! Remove it from Apple Menu => System Preferences =>Network =>DNS Servers or similar location in your router if you've got a 'home network'. If all you have is "poor" DNS servers in your list, call your ISP and insist that they give you the address of a name server which is protected against the recently exposed DNS cache-poisoning threat.
Also, open System Preferences/Network. Click the DNS tab. Add these numbers in the DNS Servers box.
208.67.222.222
208.67.220.220
See if that helps.
Carolyn

Script works for one frame but not another

I set up 2 keyframes, each one loads a different text file
into a dynamic text box. The text box for the first keyframe is
named "session" and the text box for the second keyframe is named
"oneptq". The text file for the first text box is named Titles.txt
and the text file for the second keyframe is 100Q.txt. The code I'm
using is identical (except for the respective names of the text
boxes and text files) but for some reason the text will load in the
first text box but not the second.
Here's my AS for the first keyframe:
lvLoader = new LoadVars();
lvLoader.onLoad = function(success)
if(success)
session.text = lvLoader.textbody;
lvLoader.load("Titles.txt");
And my AS for the second keyframe:
lvLoader = new LoadVars();
lvLoader.onLoad = function(success)
if(success)
oneptq.text = lvLoader.textbody;
lvLoader.load("100Q.txt");
I can't figure this thing out. Please help. Thanks.

Have you double checked that it's a DYNAMIC text box? Maybe
it was accidentally swapped by to static at some point...

Flash not working for one user, but not another on this CPU

Hi,
For user A on my computer most video will play in Safari, Firefox, and Chrome. But video at nfl.com will not play. The ads will play but not the actual feature.
I just found out that the videos on nfl.com will work for user B. I have rerun the Adobe Flash 10.1 installer in user A's account several times with no luck.
Are there permissions or libraries I should trash to try to restore this capability?
thanks,
Steve

HI,
For user A on my computer
Try uninstalling the current copy of Flash, reinstall new, then repair permissions.
Uninstall Flash
Install the most recent version of Flash here.
Now repair permissions.
Launch Disk Utility. (Applications/Utilities) Select MacintoshHD in the panel on the left, select the FirstAid tab. Click: Repair Disk Permissions. When it's finished from the Menu Bar, Quit Disk Utility and restart your Mac. If you see a long list of "messages" in the permissions window, it's ok. That can be ignored. As long as you see, "Permissions Repair Complete" when it's finished... you're done. Quit Disk Utility and restart your Mac.
You may also need to delete the Flash cache. Instructions here.
http://discussions.apple.com/thread.jspa?messageID=11672709&#11672709
If that doesn't help, install the v10.6.4 Combo Update It's ok to do this even though you are already running v10.6.4.
Carolyn

ODBC--connection to 'SQL Serverservername' failed for one user but not another

In Win7, we're linking tables in an MS Access 2010 db to tables in a SQL Server 2008 R2 db. The driver user by the File dsn is SQL Server version 6.01.7601.17514 & we're using SQL Server Authentication.
For some reason, one user gets the msg "ODBC--connection to 'SQL Serverservername' failed" before they're even asked for a password, but for other users, the prompt comes up and when they uncheck the Windows Auth box, they enter their password
and connect successfully to the SQL Server db. Both users have db_datareader access to the SQL Server db.
I had the user that gets the error msg log onto my PC and they get the same error (yet it works for me.)
This user was, however, able to successfully relink the tables, but then when we closed the access db and opened it again, the user got the "ODBC--connection..." error agin.
I'm stumped as to why this is happening for one user.

Hello Knellen,
Please help to collect more log information regarding this issue, such as windows event log, SQL Sever log information. They are helpful for us to troubleshoot it.
Regards,
Elvis Long
TechNet Community Support

VC model fails for one user but not another - both have same auths

We have a VC model that we created and moved to Prod (portal NW04s connecting to BW 3.5 query). It works fine for user A, but user B gets error:
#1.5#0003BADBD644002D000000030000053D0004282F58AC16AC#1170083723088#com.sap.port
al.visualComposer_NWBIKit_logger#sap.com/irj#com.sap.portal.visualComposer_NWBIK
it_logger#DOBREGON#11523#####SAPEngine_Application_Thread[impl:3]_5##0#0#Error#1
#/System/Server#Java###Cannot execute BW query::Nested Exception. Failure to exe
cute native function. Nested Exception. INVALID_VARIABLE_VALUES
Both user have same authorizations in Portal and BW backend.
There is no trace info on the BW back end, so it seems like the hangup is occuring on the portal side.

It turns out it was the backend authorizations. The user was able to view the BW query via the BEX Explorer. But when she tried to access it via a VC Flex IView, we got that error. Initially I wasn't seeing any auth traces in the BW system, but then we expaneded the trace and determined the user was missing an activity. It's a strange error. Would be nicer to see a 'user not authorized' or something along those lines to better pinpoint the cause. But we're good now.

Return 0 count when a Department within a CTE contains records for one set, but not another

This is a bit of a complicated question to explain, but I am hoping not as complicated to resolve. I will try to describe this generically to allow anybody who can provide a solution to provide a generic example that anybody could adapt to their data.
In my query, I created a CTE which combines two separate sets of data. One set of data lists who is within a given audience (call it audiencelist). The other set lists people who are in that same audience and have completed a given course (call if courselist).
This is then all brought into one table by the CTE.
My resulting report in Visual Studio 2008 is then going to include an expression to count each employee from both lists by department within the same field. (I will achieve this by first grouping by department, and then by the appropriate measure,
which in the case of this example, I am calling audiencelist and courselist. Then, I will include an expression that counts the Employees.) The problem is, if a department has somebody in the audience, but NOBODY from that department has completed the
course yet, I need the department to still show up in the "courselist" but with a count of 0.
Example of the desired result:
Dept
Field
Count
A       Audiencelist 25
A       Courselist     15
B       Audiencelist  20
B       Courselist     10
C       Audiencelist 20
C       Courselist     0
I was trying as best I can to make this a generic example, but let me know if it would be easier if I share some of my actual code so you can provide a solution. My hope was that somebody could offer a generic example I could adapt to my data.

I am having a little trouble following this example, or the one provided at the link above. I was hoping to just allow for a generic example, but I guess it may help if I share my actual code. My query is rather long, but I will just share the relevant parts
for the sake of the sample.
gm101measures
AS
select
dimUser.EmpFK MeasureEmpFK,
RIGHT(OrgCode2, LEN(OrgCode2) - 2) MeasurePC,
audusersName MeasureAudName,
dimActivity.ActivityName MeasureActName,
dimActivity.Code MeasureActCode,
CASE
WHEN OrgCode2 LIKE 'US%' then 'US'
WHEN OrgCode2 LIKE 'CA%' then 'CA' END
CountryCode,
'ACTUALS_GM101' SOURCESYSTEMID,
Null CURRENCYCODE,
'GM101CERT' MEASUREID,
Null MEASUREDOLLARS,
CASE
WHEN GETDATE() Between '20131001 00:00:00' AND '20140930 11:59:59' THEN '2014'
WHEN GETDATE() Between '20141001 00:00:00' AND '20150930 11:59:59' THEN '2015'
WHEN GETDATE() Between '20151001 00:00:00' AND '20160930 11:59:59' THEN '2016'
WHEN GETDATE() Between '20161001 00:00:00' AND '20170930 11:59:59' THEN '2017' END
FiscalYear,
CASE
WHEN MONTH(GETDATE()) = '10' THEN '1'
WHEN MONTH(GETDATE()) = '11' THEN '2'
WHEN MONTH(GETDATE()) = '12' THEN '3'
WHEN MONTH(GETDATE()) = '1' THEN '4'
WHEN MONTH(GETDATE()) = '2' THEN '5'
WHEN MONTH(GETDATE()) = '3' THEN '6'
WHEN MONTH(GETDATE()) = '4' THEN '7'
WHEN MONTH(GETDATE()) = '5' THEN '8'
WHEN MONTH(GETDATE()) = '6' THEN '9'
WHEN MONTH(GETDATE()) = '7' THEN '10'
WHEN MONTH(GETDATE()) = '8' THEN '11'
WHEN MONTH(GETDATE()) = '9' THEN '12' END
FiscalMonthNbr
from
dimUser INNER JOIN
audusers ON audusers.DataSetUsers_EmpFK = dimUser.EmpFK INNER JOIN
Org ON dimUser.PrimaryDomFK = Org.Org_PK INNER JOIN
factUserRequiredActivity ON factUserRequiredActivity.UserID = dimUser.ID INNER JOIN
dimActivity ON dimActivity.ID = factUserRequiredActivity.ActivityID INNER JOIN
dimRequirementStatus ON factUserRequiredActivity.ReqStatusID = dimRequirementStatus.ID LEFT OUTER JOIN
UsrOrgs ON dimUser.ID = UsrOrgs.UserID LEFT OUTER JOIN
UsrDoms ON dimUser.ID = UsrDoms.UserID
WHERE
dimActivity.ActivityName = 'GM101 Program Completion'
AND
dimRequirementStatus.name = 'Satisfied'
AND
(audusersName = @audparam)
UNION
select
dimUser.EmpFK MeasureEmpFK,
RIGHT(OrgCode2, LEN(OrgCode2) - 2) MeasurePC,
audusersName MeasureAudName,
Null MeasureActName,
Null MeasureActCode,
CASE
WHEN OrgCode2 LIKE 'US%' then 'US'
WHEN OrgCode2 LIKE 'CA%' then 'CA' END
CountryCode,
'ACTUALS_GM101' SOURCESYSTEMID,
Null CURRENCYCODE,
'GM101AVAIL' MEASUREID,
Null MEASUREDOLLARS,
CASE
WHEN GETDATE() Between '20131001 00:00:00' AND '20140930 11:59:59' THEN '2014'
WHEN GETDATE() Between '20141001 00:00:00' AND '20150930 11:59:59' THEN '2015'
WHEN GETDATE() Between '20151001 00:00:00' AND '20160930 11:59:59' THEN '2016'
WHEN GETDATE() Between '20161001 00:00:00' AND '20170930 11:59:59' THEN '2017' END
FiscalYear,
CASE
WHEN MONTH(GETDATE()) = '10' THEN '1'
WHEN MONTH(GETDATE()) = '11' THEN '2'
WHEN MONTH(GETDATE()) = '12' THEN '3'
WHEN MONTH(GETDATE()) = '1' THEN '4'
WHEN MONTH(GETDATE()) = '2' THEN '5'
WHEN MONTH(GETDATE()) = '3' THEN '6'
WHEN MONTH(GETDATE()) = '4' THEN '7'
WHEN MONTH(GETDATE()) = '5' THEN '8'
WHEN MONTH(GETDATE()) = '6' THEN '9'
WHEN MONTH(GETDATE()) = '7' THEN '10'
WHEN MONTH(GETDATE()) = '8' THEN '11'
WHEN MONTH(GETDATE()) = '9' THEN '12' END
FiscalMonthNbr
from
dimUser INNER JOIN
audusers ON audusers.DataSetUsers_EmpFK = dimUser.EmpFK INNER JOIN
Org ON dimUser.PrimaryDomFK = Org.Org_PK LEFT OUTER JOIN
UsrOrgs ON dimUser.ID = UsrOrgs.UserID LEFT OUTER JOIN
UsrDoms ON dimUser.ID = UsrDoms.UserID
WHERE
audusersName = @audparam
The final main query actually just pulls in everything from this CTE. My next step was going to be to pull this information all into the report, sort and group by MeasurePC (the Department, referred to in my company as a "Profit Center" and by
the MeasureID (GM101Cert for those who completed the course, GM101Avail for those who are part of the audience) and then have an Expression that would count each MeasureEmpFK (the employee codes). However, that is when I realized it wouldn't count 0's for
any MeasurePC in the GM101Cert set of data that did not have any people complete the course.
Here is a mock-up of how the data would currently look from this above query:
Country Code
SOURCESYSTEMID
Fiscal Year
Fiscal Month Nbr
Org Value
CURRENCYCODE
MEASUREID
MEASUREDOLLARS
Measure Emp FK
US
ACTUALS_GM101
2014
7
Org A
GM101AVAIL
170445
US
ACTUALS_GM101
2014
7
Org A
GM101AVAIL
2671
US
ACTUALS_GM101
2014
7
Org A
GM101AVAIL
113
US
ACTUALS_GM101
2014
7
Org A
GM101AVAIL
271
US
ACTUALS_GM101
2014
7
Org B
GM101AVAIL
272
US
ACTUALS_GM101
2014
7
Org B
GM101AVAIL
317
US
ACTUALS_GM101
2014
7
Org B
GM101AVAIL
375
US
ACTUALS_GM101
2014
7
Org A
GM101CERT
170445
US
ACTUALS_GM101
2014
7
Org A
GM101CERT
2671
From here, I was going to pull the data into a report to count. Using the above example, my desired result would be:
Country Code
SOURCESYSTEMID
Fiscal Year
Fiscal Month Nbr
Org Value
CURRENCYCODE
MEASUREID
MEASUREDOLLARS
Measure Emp FK
US
ACTUALS_GM101
2014
7
Org A
GM101AVAIL
4
US
ACTUALS_GM101
2014
7
Org A
GM101CERT
2
US
ACTUALS_GM101
2014
7
Org B
GM101AVAIL
2
US
ACTUALS_GM101
2014
7
Org B
GM101CERT
0
I had planned to achieve this just by pulling the data into my report and then, instead of pulling the EmpFK, I would create an expression to count them. However, I realized this wouldn't achieve the 0 counts when some PC's did not have anybody who had completed
the course yet.

Paypal button code works fine for one button but not another

Hey there, I have a paypal btn with this code on it:
on(release){
mylv = new LoadVars();
mylv.cmd = '_s-xclick';
mylv.encrypted = '-----BEGIN
PKCS7-----MIIH0QYJKoZIhvcNAQcEoIIHwjCCB74CAQExggEwMIIBLAIBAD
CBlDCBjjELMAkGA1UEBhMCVVMxCzAJBgNVBAgTAkNBMRYwFAYD
VQQHEw1Nb3VudGFpbiBWaWV3MRQwEgYDVQQKEwtQYXlQYWwgSW
5jLjETMBEGA1UECxQKbGl2ZV9jZXJ0czERMA8GA1UEAxQIbGl2 ==-----END
PKCS7-----';
mylv.send('https://www.paypal.com/cgi-bin/webscr', 'POST');
(i took a few characters out of the encrypted string--just in
case and to shorten the post)
This button works fine.
Now, I need a second button for a different item.
So, I went on to paypal last night and generated a "buy now
button" several different times. Copied and pasted the encrypted
string where the old one is. When I have the site live and click on
the new button it takes me to a paypal pages that says "We were
unable to decrypt the certificate id."
Any one have this issue before? And does anyone have any idea
of how to correct it?
Thank you in advanced,
hutch

HI Bob,
You can test your settings by clicking the big "Test My DNS" button at <https://www.dns-oarc.net/oarc/services/dnsentropy>. If you see "Poor" on any of the tests, don't use that domain name server! Remove it from Apple Menu => System Preferences =>Network =>DNS Servers or similar location in your router if you've got a 'home network'. If all you have is "poor" DNS servers in your list, call your ISP and insist that they give you the address of a name server which is protected against the recently exposed DNS cache-poisoning threat.
Also, open System Preferences/Network. Click the DNS tab. Add these numbers in the DNS Servers box.
208.67.222.222
208.67.220.220
See if that helps.
Carolyn

Application works for one user but not another......Please help

Hi just wondering if anyone can help.
We have an app (get i_player automator) that we have been successfully using for the last year or so. The other day our internet connection died mid download and the app stopped responding.
Rather than force quit darling hubby did something fancy with the terminal window (not entirely sure what but I remember kill, bash and gerlp??).
Anyway since then the app will start appear in the doc (bouncing happily up and down) but no window will open. This happens just on my log in. If I ctrl click the application is listed as not responding.
The app works correctly for other users on the same machine.
I have tried the following to no avail
Turning off and on again
Deleting the app and re installing
Any ideas?

Most applications work user-per-user, maybe your darling has to do some more of that magic in the Terminal on your account?

Audio click static on one site but not another

I have a website using video and audio stream ....on my site there is an audible click and static but on other sites such as ustream there is no click or hiss.....i have tried usind echo supression without any luck.......how do these other sites clean up my audio signal? how can i clean it up on my site?

Could it be a permission problem?

Airplay works for one user but not for another on the same machine

I have the problem where airplay works for one user but not for another and both users are on the same machine. For the user where it does not work, everything appears normal, it's just that there is no sound being transmitted. I have tried restarting the Airport express, restarting iTunes, repairing disk permissions. Any ideas about what can be done to resolve this?

my /etc/group:
root::0:root
bin::1:root,bin,daemon
daemon::2:root,bin,daemon
sys::3:root,bin
adm::4:root,daemon
tty::5:
disk::6:root
lp::7:daemon
mem::8:
kmem::9:
wheel::10:root,hans,ibm,gast
ftp::11:
mail::12:
uucp:x:14:
log::19:root
locate:x:21:
smmsp::25:
http::33:
games::50:
network:x:90:
video:x:91:
audio::92:ibm,gast
optical::93:hal
floppy:x:94:hal
storage:x:95:hal
scanner:x:96:
power:x:98:
nobody::99:
users::100:gast
dbus:x:81:
hans:x:1001:
vboxusers:x:108:hans
policykit:x:1002:
hal:x:82:
kvm:x:78:
nx:x:85:nx
avahi:x:84:
camera:x:97:
gdm:x:1003:
gast:x:1004:

Implicit read with assembly module instance working on one computer, but not another

Hi,
I'm trying to set up an on-site computer to run a VI which uses assembly instances for data communication, but for some reason I'm unable to establish a connection to the PLC.
I'm running the example vi "CreateAssemblyInstance.vi" to try and get the communication set up before I start using my actual program.
When I run this code on my development machine, I'm able to establish a connection to the PLC and read data. I then go into RSLogix 5000 and change the IP address to the on-site machine and try to run the test VI there, but I'm unable to make a connection. LabVIEW-side, the program thinks that it's established a connection and is reading/writing data, but PLC-side I'm getting a "Connection Failed" message in RSLogix.
I find it weird that LabVIEW thinks the connection was established just fine, which the RSLogix says it can't connect to the VI.
Just wondering if anyone else has had this happen. We aren't sure why the same VI runs on one machine but not another. We used RSLogix to change the IP address of the target machine, so we don't think that's the issue. And both computers are on the same network, so we don't think it's a firewall issue either.
LabVIEW-side, things should be identical. I'm running the same example VI that came with the Ethernet/IP module. PLC-side, we're changing the target IP of the module within RSLogix 5000 (and we're sending the updated information to the PLC) to match the machine we're trying to make a connection with. Are we missing any steps? This is the first time we've tried using an assembly module, so we're having a hard time troubleshooting.
Any ideas on why this is happening?

I'm pretty sure we're using a generic ethernet module:
I can communicate explicitly with the problem computer, it's able to use 'Tag Read' and 'Tag Write' to communicate with the PLC.
We started having another problem just recently too. The Tag Read and Write commands are almost always timing out. I keep getting the error message -251723752:
Detailed error info: Error -251723752 occurred at EthernetIP Tag Read REAL.vi;Details: The request response was not received in the requested timeout period Possible reason(s): Ethernet/IP Industrial Protocol: (Hex 0xF0FF0018) The request response was not received in the requested timeout period
I can't figure out what's causing this all of a sudden, could these issues be related?

Personal domain for one site but not another

Similar Messages

Maybe you are looking for