PGI reversed (vl09) for wrong date

Hi,
I need some advice for the following scenario.
That is to PGI a delivery with the Actual GI date for a particular month (July) but the PGI was reversed for the following month (August) where the original PGI had been done for the correct month (July).
when we try to PGI again we get stock deficit errors.
Please explain the process to follow if such scenario arises.
Thanks
Keshi

Hi,
Please check the below scenario.
IPGI'd on the the 13.09.2007.
Reversed PGI on 05.10.2007
Then when we tried to PGI on 13.09.2007, it gave the error "Deficit of BA Unrestr. prev. 100 PC : 70001358 "
So as u'll have suggested again issued the goods on the 05.10.2007.
But now when we try to reverse PGi on the 13.09.2007, it gives the error message " Cancellation date 13.09.2007 is before the goods issue date 05.10.2007"
Appreciate your feedback on this. I want to carry out the PGi on the 13.09.2007.
Thanks
Keshi

Similar Messages

PGI reversal issue for STO Delivery

Friends,
While I am trying to reverse the PGI using VL09 for a STO delivery, I get an error " E M7 022: PU withdrawn quantity exceeded by xx Ton : Material, plant and storage location".
Looked at the OSS notes but could not arrive at the correct one.
Please help as this is an urgent issue.
Thanks and Regards,
Ram
Edited by: Ram Murthy on Apr 25, 2008 2:13 AM

If you are shipping from, for example, plant 100 to plant 200 then when you PGI in100 the inventory is immediately placed into plant 200 inventory in special stock "in transit". If the two plants are in different company codes then it is placed into "In transit CC".
Please check in transit stock is sufficient to be reduced by the cancellation of the PGI.
Regards,
Brian

PGI reversal VL09 not happening

hi
user has done following cycle
1.ME21N-PO document type UB and Item cat I.
2.VL10B- Outbound delivery
3.VL06G-goods issue using automatic MVT 647 and 101)
4.VF01-Performa Invoice(billing Type JEX)
5.J1IIN- Excise invoice.
In billing base price is missing because of that all duties and net price zero.now user wants to cancel entire cycle. he has done excise cancellation using J1IH. we are not able to reverse billing using VF11, we are not able to PGI reversal using Vl09. it giving error "No dat available for your selection".
Note: is it problem of JEX because we have not assigned cancell billing type and doc pric procedure to JEX?
any solution for the above issue.

Hi rising sun.,
VF11 is not for reversal of the billing doccument it is fo cansellation & when you want to cansel the billing doccument first the accounting doccument for t hat billing doccument should be canselled,after you cansel the billing doccument reverse the goods issue in VL09and reject in VL02n,then VA02 reject the doccument
As you are saying that no data available then go to VF04 and see whether your delivery doccument is there & VF05 to see t he Billing doccument
If you are ablr to see the doccuments you can cansel them
J1IH is to cansel the excise doccument
REWARD if helpfull
Thanks & Regards
Narayana

"Today" smart Mail folder filters for wrong date

Hi
The Today smart folder in Mail is set to show today's messages, but is showing messages dated August 8 instead.
I only got my MacBook Air yesterday and it's my first Mac, but I'm computer-literate so I checked the date setting and it's correct. I've set the main language to Catalan but I can't see how that might affect the way the Mac reads the date - and anyway, today's date in my preferred version - dd/mm/yy - would be read as August 9th under the preferred US format, mm/dd/yy.
PS: Any hints on how to scroll quickly to the top or bottom of the list of emails?

Thank you Tom.
It seems to have made a difference (took me a while to get back to it as I had some urgent work to take care of first).
But now, Today is finding every single draft version of every email I have drafted during the day - and Mail seems to save a draft every minute, for which I am grateful but not if they're all going to turn up in my Today folder!
Any suggestions?

How to find out Which LineItem is having the wrong data

Hi All,
This is Idoc--File scenario
Iam sending the Idoc from R/3 and it may have several Line items and related data.
If One line item data is wrong also the Idoc will be errored Out in MONI,for this i used UDF in mapping to through the Exceptions. So i have to goto WE05 in R/3 and i have to check each and every line item for wrong data and then i will repost it.
the thing is how can i find out the Particular line item is caused for this Error.
REgards

Hi Sarvesh,
No, in MONI it will not take us to the correct Lineitem which is having the wrong data.
That is only the problem here.
Any Views.........
Regards

PGI reversal not happening in vl09

hi
user has done following cycle
1.ME21N-PO document type UB and Item cat I.
2.VL10B- Outbound delivery
3.VL06G-goods issue using automatic MVT 647 and 101)
4.VF01-Performa Invoice(billing Type JEX)
5.J1IIN- Excise invoice.
In billing base price is missing because of that all duties and net price zero.now user wants to cancel entire cycle. he has done excise cancellation using J1IH. we are not able to reverse billing using VF11, we are not able to PGI reversal using Vl09. it giving error "No dat available for your selection".
Note: is it problem of JEX because we have not assigned cancell billing type and doc pric procedure to JEX?
any solution for the above issue.

Proforma Invoice cannot be reversed. But also it will not stop you from reversing PGI. Check the document flow & ensure that the correct number is being used to cancel the PGI.
Once PGI is cancelled, you can futher cancel the Delivery.
Regards,
Rajesh Banka

Business Area-Cost Center error while doing VL09 (PGI Reversal)

Hi Friends,
Kindly go through the "ERROR" message and "IMPORTANT" point as mentioned below:This is happening while reversal of PGI in VL09.
IMPORTANT: Just to make you aware, the cost center in error (CONSDSPL) was nowhere assigned in FS00 or OKB9. Also to state that at the time of this error some different cost center was assigned in FS00 which was having business area SUGR. So PGIs are picking up two business areas i.e. 1.DSPL (from Plant-Division-BussA setting) & 2. SUGR (for P&L GL from FS00)
Following error coming while doing PGI reversal:
ERROR -
> BAL1/CONSDSPL CTR belong to business area DSPL not SUGR
Message no. KI188
Diagnosis
Account assignment object BAL1/CONSDSPL, type CTR is assigned to business area DSPL. You made an explicit assignment to business area SUGR.
System Response
The posting row may contain only one business area.
Procedure
Perform one of the following actions.
Make an explicit assignment to business area DSPL. To do so you must set the "Business area" field as entry-ready in Customizing.
Enter an account assignment object assigned to business area SUGR.
Change the assignment of BAL1/CONSDSPL to business area DSPL. Note the document number and continue processing the document after changing the assignment.
PLEASE GUIDE. NEEDED ANSWER BADLY.

Business area filed in cost center CONSDSPL is DSPL (what it should be). In this scenario, they have assigned SGPRODCTN cost center in GL master wherein business area is SUGR.
That means, when accounting entry is getting generated, it will show two business areas. One will be fetched from "Plant-Division-BussA" setting (SPRO) & the other from GL. Also to make you aware that here the business area should be DSPL, but since they assigned wrong cost center in GL master, the entries are going to SUGR as well.
Most important thing to notice out here is that when this error came "no default account assignment was done through OKB9" The cost center showing in error viz. CONSDSPL was nowhere assigned. So the question is from where the system is fetching this cost center?

How can I get my @mac email to work? when I try to reset password, i cannot access email for this and the security tells me I have wrong date of birth

Have used bilmac@mac email address for years last couple of weeks am getting message icloud needs password which it then rejects, when I try to reset password,they want email to verify i cannot access email and the security question is D. O B. it tells me I have wrong date of birth. so I am stumped, any ideas bilmac

COME ON PEOPLE. (WHY ARE THE LETTERS SO BIG HERE?) I AM VERY OLD AND JUST LIKE THINGS TO STAY THE SAME. I DID NOT, DO NOT, WANT ICLOUD TO DO ANYTHING I HAVE NOT USED IT AT ALL YET IT HAS MANAGED TO MESS UP MY EMAIL ADDRESS WHICH I HAVE BEEN USING FOR YEARS, IT ASKS FOR PASSWORD THEN REJECTS AND WHEN I TRY TO RESET WITH APPLE ID THEY ASK FOR SECURITY AS I CANNOT ACCESS THE EMAIL ADDRESS THEY HAVE FOR ME BECAUSE ICLOUD ASKS FOR PASSWORD, THEN APPLE TELL ME I DONT KNOW MY OWN DATE OF BIRTH, VERY CONFUSING

Bridge CS6 occasionally displaying wrong 'Date Created' for .NEF's

I noticed this problem only recently, and this the third time it happens (that I know of).
Sometimes my Bridge puts a wrong Date Created (not Date File Created or Date File Modified) on a NEF RAW file, whilst the next one (taken perhaps just a few seconds or a minute later) has the proper date. Strangely the Date File Created & Modified do show the proper creation date.
Example to clarify:
Metadata viewed on my D90 itself
Photo 1 taken on: 30/09/2013, 9:03:26 PM (DD-MM-YYYY)
Photo 2: 30/09/2013, 9:07:52 PM
Photo 3: 30/09/2013, 9:08:12 PM
Photo 4: 30/09/2013, 9:08:34 PM
Photo 5: 30/09/2013, 9:08:54 PM
Photo 6: 30/09/2013, 9:09:34 PM
viewing in bridge:
Photo 1: Date Created: 30/09/2013, 9:03:26 PM
               Date File Created: 30/09/2013, 9:03:26 PM
               Date File Modified: 30/09/2013, 9:03:26 PM
Photo 2: Date Created: 30/09/2013, 9:07:52 PM
               Date File Created: 30/09/2013, 9:07:52 PM
               Date File Modified: 30/09/2013, 9:07:52 PM
Photo 3: Date Created: 23/09/2013, 7:42:02 PM
               Date File Created: 30/09/2013, 9:08:12 PM
               Date File Modified: 30/09/2013, 9:08:12 PM
Photo 4: Date Created: 30/09/2013, 9:08:34 PM
               Date File Created: 30/09/2013, 9:08:34 PM
               Date File Modified: 30/09/2013, 9:08:34 PM
Photo 5: Date Created: 04/09/2013, 10:14:45 AM
               Date File Created: 30/09/2013, 9:08:54 PM
               Date File Modified: 30/09/2013, 9:08:54 PM
Photo 6: Date Created: 04/09/2013, 10:15:06 AM
               Date File Created: 30/09/2013, 9:09:34 PM
               Date File Modified: 30/09/2013, 9:09:34 PM
As you can see, it's not a 'stable' deviation.
I could live with it, apart from one problem: the batch rename function only has 'Date Created' as option for renaming with date.
It's also quite annoying for my photography study, since my teachers might get confused by the wrong date in the Metadata when I turn my photo in.
I tried compacting the cache whilst my camera's SD card wasn't connected (so the files aren't 'available' anymore), no difference.
Another thing I tried was to hook my SD card up on a different computer, same result.
So it might be my SD card, but that doesn't explain why the correct date is shown on my D90 itself, though.
If anybody here has an idea how to fix / avoid this problem, help is much appreciated.
Greetings,
Alex

I have never inserted the 8GB card in the D3000 before just a minute ago.
And I just took 7 rapid photo's of my previous post (~1s interval)
All 7 displayed actual date in my camera, the first 4 displayed a wrong date in bridge (24/09/2013, times; 2:12:16PM, 2:12:20PM, 3:09:24PM and 3:10:26PM). Last 3 displayed proper time in bridge.
So yea, I'm pretty sure something is wrong. I'll try formatting the SD card (as suggested before) but however you look at it, this doesn't add up.
edit:
Well I figured out one thing: if I view the photo's directly on my SD card through bridge, it shows the same date for Date Created, Date File Created and Date File Modified.
Quite logical, to be honest, since I am viewing the date the file was created on the camera.
However, if I export photo's with Adobe Photo Downloader (or whatever it's called again), it displays the date those copies were created (by Date File Created). Date File Modified is still ~the same as Date Created since it hasn't been modified since the original creation.
edit2:
The formatting seems to have solved the issue, for now anyway. Still have no clue why the SD card got such (occasional) cases of drunkness.

User defined function for removing wrong data ... !!!

Hi Experts,
I'm having a source data like this
1001     545     6895895     1584     654     5478
1002     525     6895895     5084     654     5472
1003     535     6895895     0584     654     5478
1004     545     6895895     5184     654     5478     4XXX     &^%%     1004     545
1005     555     6895895     5824     654     5478     8547     0000     522#     ##00
1006     565     6895895     5844     654     5478
1007     575     6895895     5845     654     5478
1008     585     6895895     5846     654     5478
Some times I get a wrong data in my source file (above 4 and 5 th rows) .
My requirement is to remove these kind of wrong lines(entire lines to be removed) whenever XI reads the data. For this what is the standard function i can use in mapping. I thought I can create my own function to remove such kind of false data lines. It would be helpful for me if some body provide me the java code.
Thanks very much.

Hi Swarna,
1001 545 6895895 1584 654 5478
1002 525 6895895 5084 654 5472
1003 535 6895895 0584 654 5478
1004 545 6895895 5184 654 5478 4XXX &^%% 1004 545
1005 555 6895895 5824 654 5478 8547 0000 522# ##00
1006 565 6895895 5844 654 5478
1007 575 6895895 5845 654 5478
1008 585 6895895 5846 654 5478
is it the .txt file you are keeping. Or the input in your mapping.
You just Tell your requirement properly.
If it is input in Mapping. Map like this
input ----->subtring( starting position 0 andNumber of characters 30) ---->Output
substring is a standard Text function.
Thanks.

Adobe form is printing wrong data for the first print attempt

Hi All,
I need a quick help from Adobe print form gurus. Until now i dint get an issue on printing adobe interactive form from my portal. For eg., when i am giving a print for the first attempt, it was printing the form with wrong data in form fields and whereas when i tried to print it for the second time, then it is printing properly with right information.
Please help.
Regards,
Praveen Kambala.

Hi Praveen,
Find out the data what is being printed for the first time, and check what is the flag that is making the change. Hope that should resolve your issue.
Thanks,
Rakesh.

PGI reversal for WM managed stock

Hi,
TO and PGI done against a outbound delivery. PGI reversed. Material moved with LT10 from storage type 916 back.
Same material/batch TO/PGI done against different delivery.
Now when we do LT0G for original delivery it displays lock icon and we cannot remove the material picked against this delivery.
Please advise.
Regards,
Pratap

Hi Pratap,
That meens you have moved stocks manually from 916 storage type and delivery bin to some ware warehouse. so you can't able to move /reverse stocks to the 916 and respective delivery.
only the thing you can do reset the Over OverallWMStatus 'C'- to 'A' to rest the delivery to use using following steps
1. Go to change the delivery quantity to 0 and then copy the delivery quantity as pick quantity (Menu path Edit -> Copy delivery quantity as pick quantity).
2. Once the pick quantity has been reset to 0, the delivery quantity can be changed back to it's original value or the item can be deleted if it is no longer required.
3. Report RVDELSTA can be executed to update the delivery WM and picking status.
4. Use the same delivery and create TO and PGI..
Regards,
Madhu Arambakam

Wrong data in cube for time dependent nav attribute

Hi Experts,
I am facing a strange problem.
One of the navigational attr used in one cube was not time dependent before.
Now we have changed it to time dependent.
But after that the cube is fetching wrong data for the nav attr.
In the Master data table (Q table) data is fine.
Kindly suggest.
Regards,
Debjani

Hi Debjani,
As Federico said, when you display the content of the cube (or when you execute a query) you enter the reference date on which the time-dependant attribute will be searched. This unique reference date will be used whatever the cube data is.
Ex :if the reference date is 2010/02/14, you will have the time-dep attribute value for 2010/02/14,for 2011 data, 2010 data or whatever.
If you want to change dynamically the reference date depending on a date on the cube, things become a lot more difficult. The only possibility I can think of is "virtual characteristics" (you will find a lot of litterature on the subject on sdn).
Regards,
Fred

Is there any way for updating wrong data in ODS and infocube?

Hi all
Is there any way for correcting wrong data in ODS and infocube?

You could do a selective deletion, by specifying the filter values, so that you only delete a subset of the entire data. You could then do a re-load for the same selection so that there is no duplication of records.
This is on the assumption, that your incorrect data is due to some incorrect update or transfer rules, which you have now corrected (before the re-load).
mate, you have mentioned that You could then do a re-load for the same selection .
could you please tell me how to do a re-load ? thank you very much

LX25 displays wrong data for the entered date range

System says "Inventory not executed" status for the bins even if Inventory is executed for the bins in the date range provided in the selection screen.
For e.g.
I execute report for Warehouse XYZ. I specify date range as 01.04.2014 to 31.03.2015.
I get some bins in the status "No Inventory executed".I presume that Inventory is not executed for these bins within this period.
But when I go to each bin in the status "No Inventory executed" I find that The bins are counted on the dates 24.09.2014 and then on 05.04.2015.
Then I changed the date in the selection screen to 01.04.2014 to 05.04.2015.
Those bins which were earlier in the status of "No inventory status executed" are now not present in this status.
Does this mean that LX25 report is based on the Last counted date? Or the report is not displayed correctly for the date range provided?
I want to know the criteria based on which the LX25 report works.
Thanks In Advance.

Hi Jurgen,
Below information I found from the LX25 report info in SAP.
Inventory status
Description
This report provides information on the stock in the storagae bins and presents this on the screen. You can limit your selection by warehouse number, storage type and storage bin, or choose the following criteria:
Total number of bins
Number of inventoried bins in the selection period
Bins with active inventory
Bins with planned inventory
Bins without executed inventory
From this list, you can obtain a plan of the individual storage bins with further detail information within a storage type, by clicking on the relevant line total.
It clearly shows that the report should be able to show the number of inventoried bins in the selection period, which it doesn't. Does it mean that system is not working as expected?
Regards
Soumya

PGI reversed (vl09) for wrong date

Similar Messages

Maybe you are looking for