Phase One P45+

I can't seem to open anything but the .tif thumnails from my p45+ in bridge. Camera Raw 4.1 won't open the files at all. Is there a time frame for the P45+ to be supported in Camera Raw and Bridge - or am I doing something wrong (likely)?
Thanks,
Jeff

Do you have a date for when for P45+ RAW files will be supported into Lightroom if at all?

Similar Messages

  • Phase One P45 pixel count mess with ACR 4.3

    I shoot with P45 plus and I'm trying to get exactly the same pixel size when processing
    with P45 as with Capture .
    The problem is that there is some pixels difference, so proper alignment is not possible .
    Looks like pixel proportions in ACR are wrong ( after all it is a Phase digital back )
    ( It could be that ACR sees some " hidden " pixels or similar " feature" )
    I want to process some files both in ACR ( for color ) and in Phase One
    ( for moire reduction )
    Any suggestions / workarounds ?

    The Phase One P45+ creates an image of 7248x5441 pixels. Strange, for the CFA is 2x2, so I would expect the dimensions to be even numbers, but that's how they do it.
    The active image size is 7216x5412, according to the specs at Phase One. However, the DNG converter creates a file stating, that the active area is 7248x5441, and the default crop size is 7240x5433. I guess this latter is the size, which will be generated by ACR - is that so, Jann?
    It is noteworthy, that the Phase One specification is incorrect (or they have a different understanding of "active pixels"); *all* pixels of the 7248x5441 image are active, i.e. carrying image data. However, their specification is somewhat logical: at least 7216 is a multiple of 8, and the proportion is 4:3.
    So, the DNG converter (and then ACR as well) is correct about the active size, but the crop size is a mess. The 4:3 proportion should be kept, and the best would be to do it as Phase One specifies, namely 7216x5412.

  • Phase One P45+ files won't work in 1.1

    Does anyone know why my P45+ files aren't supported in Lightroom 1.1? When will they be supported? Many thanks! Eleanor

    Oh my gosh Jeff, a couple of months without Lightroom processing with my plus files is like an eternity--really! Is there any workaround in the works, such as an update to the DNG converter that will make these plus files readable by Lightroom 1.1? Thanks again! Eleanor

  • Phase One color cast in Bridge

    Hi all:
    I know there are a lot of photographers in this forum, so I'm hoping one you can help/enlighten me.
    We just received IIQ images from a photography, shot on a Phase One P45.
    When previewing in Bridge CS5, I'm seeing a strong blue cast over the images.
    This is the first time we've ever gotten IIQ files that previewed in Bridge with such a heavy cast, and I'm wondering if something wasn't processed right before the files were delivered to us? I have a general knowledge of RAW, but not sure what happens to them before they get delivered. From what I read, it's possible that the photos should have gone through Capture One color management software before being handed to us as processed IIQ files?
    Is that the case? Has anyone ever experience this in Bridge and if so, can it be "fix"?
    Thanks,
    Lisa

    Has anyone ever experience this in Bridge and if so, can it be "fix"?
    Without having experience with Capture One or Phase One files I know that Adobe Camera Raw 6.x (comes with CS5) does support the IIQ files from Phase One P45 so Bridge should have no trouble in viewing those files.
    First put your mouse on that file and with right click menu choose purge cache for selection and see if this brings some light. If not Open the file in Camera Raw (double click or right mouse click choose open in Camera Raw. This should open the file in ACR and see if you still have the color cast and if the white balance is set to normal expected values.
    If still a color cast either contact the photographer or set the color temperature values to your wishes

  • Difficultly creating Phase One lens profiles

    Has anyone successfully created lens profiles with Phase One backs, specifically the P65+?  I'm having two major issues:
    1. file format.  I tried converting to DNG via Capture One 6 and Lightroom 3.3--both generated files that LPC could not read.  I see the image previews at the bottom center of LPC, but the higher res version in the center of the application doesn't display.  When I click "Generate Profiles" it says "Detect corners failed because file reading errors occurred"  My current workaround is to convert to TIF instead, which works fine but takes a lot more time & disk space.
    2. memory.  When I use TIFs, I get the error "Detect corners failed because out of memory..."  It suggests using fewer photos, so I've whittled it down to 3, which I believe is the minimum, but I still get the error almost immediately--it appears to be failing on just one photo.  I'm running Win 7 x64 and I have 6GB of physical RAM, 154GB free on my OS disk and 92GB free on the disk that contains the imagery.
    Any ideas?  Thanks!

    In further testing, I've found that the file format issue is momentarily solved by closing and restarting the application.  It tends to come back as soon as I perform a couple other operations, though.
    I also found that the memory limitation affects P45+ images as well--it says out of memory even if I only select 3 images--but using the P65+ in Sensor+ mode (switching from 60MP to 15MP) does result in DNGs that lens profile creator can handle (and then I can select a whole lot of them without a memory issue).

  • Phase One RAW file support needed

    Full support for Phase One files would be nice.
    If you plug in a CF card containing Phase One RAW files, Lightroom pretends to import them but it only imports the thumbnails. The work around is to download the CF card files to the hard drive and then ask Lightroom to import the folder. Once this folder is in Lightroom you can then ask for DNG conversion. It's a bit of a pain to say the least. I expect it's Phase Ones fault for chosing .tif as the extension for it's RAW files.
    Any better workarounds out there?
    Damien.
    PS: I love Lightroom and welcome further development.

    maybe i was doing something wrong, but i had no problem working with p20 and p45 raw files in lightroom. i did not import them from a cf card, though, as they were already on a hard drive.

  • Lightroom with Phase One files?

    I was wondering if anyone is using LR with Phase One files?
    I use a P45 Phase One back and really would prefer to use Lightroom (over Capture One), but I also need to use the lens correction files for the way I shoot (wide angle lenses / technical cameras etc.)..... I know LR can now do this, but it only works with dng files; everything I've read tells me that the C1 conversion to dng is not a good conversion.
    Does anyone have a good workflow for this? I suppose I could always just make a few basic corrections in C1 and then export a 16 bit Tiff to worrk on in LR, but I'd rather work with raw files as much as possible?
    Thanks for any suggestions,
    Alan.

    Yes, I agree, it is fairly simple (now that I've investigated further).
    LR does a very neat job of this...... you can export the Capture One file (TIF) as a dng and set LR to automaticaly add the new dng to the same folder (and have it stacked), then you can add the flat field correction and that comes in stacked also, so now all three files are together.
    One thing that seems a bit odd is that the Capture One TIF file (IIQL) is 55.9 Mb from my P45, but the Lightroom dng is 64.9Mb? Why is the dng larger?
    Thanks,
    Alan.

  • Phase One Raw File have lines in them (Lightroom 2.1 ACR 5.1)

    when importing Phase One P25 raw files, Lightroom is displaying tin lines across the image. those lines are not appearing in any of the Capture one Software 3.7 4.1 or 4.5 I guess ACR is not reading the Digital Back Calibration Data. I am managing thousands of Images in Lightroom and I don't want to move back to Capture one as it is very limited in terms of its meta data management and no spot removal yet.
    if I convert the Raw file (IIQ Small or Large) to DNG using Capture one then Lightroom reading the DNG file without the Lines but the file size is 44MB instead of 15MB of the IIQ Small (Phase One Raw Format). obviously duplicating all my images to DNG Quadrupling disk space is not something I want to add to my workflow.
    Adobe, can you improve the way you read the Phase One Raw Files?
    I use Phase One P25 Digital Back with the latest firmware 3.6 , Windows XP 32 and 64bit and Lightroom 2.1 (this problem appears on all Lightroom Versions including 1.4,2.0,2.1)
    I can send to adobe some Raw File Example or assist in any way I can to find a solution.
    Please Help!

    Following does not alleviate the problem, but it may shed some light on the underlying reason.
    Phase One are fooling their customers with the promise of 16bit depth. However, in fact that is only 14 useful bits; the two low order bits *must not* be used, for they represent mainly the pecularities of the hardware.
    The following capture is from a P25+ raw image (converted in DNG by the Adobe DNG converter), but only the two low order bits are processed. These should be random on their own, as theoretically they would represent the finest transitions. The two thin vertical lines show the seams between the chips; their location depends on the particular camera copy (I have seen one or two seams, i.e. the sensor is made out of two or three chips, but perhaps there can be more).
    The horizontal stripes cause posterization if an extremely underexposed image's brightness gets adjusted; the seams can become visible as thin lines.
    The image is in the "native" (landscape) orientation. The orangy rectangle is not part of the image.
    http://www.panopeeper.com/Demo/PhaseOne_P25Plus_SensorSeams.GIF

  • :: Phase One Digital Back H5

    Has anyone any idea how does Aperture handle the RAW data in the near future who was shot with the professional Digitalback from PhaseOne?

    Phase One backs are the most used high end digital back for professional photographers who need the format and quality that they produce and blow away any file that is produced by a Canon 1DS MK11.... i have both and use both extensively.... each for different types of job.
    But Phase One makes you use Capture One software (which they also sell for use with Canon cameras etc) They probably won't let Apple into their closed file system...... keep revenue for them to sell the software upgrades etc. The latest Capture One version 5 is a dog's dinner and Aperture 2 blew it away as an editing and organisational tool.... Ap 3 takes this even further......

  • Color Cast to Phase One IQ files after opened.

    I used the Lightroom beta 3.5 beta with CR 6.5 beta and now have installed the update of these two products. In beta I was able to open Phase One IQ raw files just fine but now with the 3.5 release I obtain a funny Magenta color cast that displays in the Library Mode and thumbnail but does not display in the Development Mode. This happens on both my Mac Laptop and workstation. Mac OS 10.6.8. I have not yet tried uninstalling LR and reinstalling, will do that next. The first image is in the Library mode after I have opened the file. The second is from the Development Mode. Notice how the tumbnail at the bottom remains constant but the small image on the left has changed in the Development mode to its natural look.
    I should say that this color cast happens after I adjust the temperature settings of the image, not just from mearly opening it in Development.

    I did this and it did not solve the problem. Still generating magenta tint.
    Earl

  • Phase One EIP Files?

    Can the Adobe DNG Converter 5.3 open and convert Phase One P65+ files to DNG?
    Checked the Adobe camera support screen and found every Phase One model supported except the P65+ and no mention of EIP files.
    Thanks
    Gene

    genosmm wrote:
    Can the Adobe DNG Converter 5.3 open and convert Phase One P65+ files to DNG?
    Not really, at this point if you want DNGs, take the original raw into Capture One 4.x and save them out as DNGs from there...then Camera Raw 5.3 can open them.

  • Does LR5 FULLY support Phase One P65+ Raw files?

    Hello,
    I know the files are "supported", and will open. However, the quality is quite bad and nowhere near as good as opening the same file in Capture One. Also, long exposure shots see the "black frame" totally discarded and the images are extremely noisy. Phase One support say it's because LR and CS6 are only using a portion of the Raw file and to ask Adobe.
    I would migrate to LR5 today if there were a fix or an explanation. Capture One forkflow doesn't suit me. However, the quality is just too bad to accept.
    Any ideas?
    Regards,
    Enrico.

    The link below will take you to the official Adobe "Bug report and feature request forum". This forum is a "user to user forum" so your comments will not necessarily be seen by the people who matter most.
    http://feedback.photoshop.com/photoshop_family

  • Phase One P25

    I am completely confused. LR has claimed that they support Phase One P25 with the release of v1.1, however after recently purchasing a P25 non-plus series, I am unable to import the RAW files. Typically the files come across as a small Tiff image even when the come off the card directly. I have been using LR since its been in beta and the idea of using Capture One makes me cringe especially fine tuning my work flow within LR and loving it to say the least! Any help or suggestions will be greatly appreciated.
    Moving forward, Phase One believes they have such a superior product with Capture One they will not address any problems with LR, per a regional manager. Must be nice to be that good...NOT!

    I did thanks however I'm still feel my question is has been unanswered. It doesn't appear that there is a solution for the problem either.

  • Phase One .capture files

    Hello
    According to the Camera Raw readme file Phase One files should be supported. But I cannot get this to work. I have a bunch of .capture files shot with a P25 - but neither Bridge, ACR 4.4.1 or Lightroom 1.4.1 knows what to do with these files.
    What's wrong? Aren't the .capture files supported after all?
    (I'm on a Mac Pro, Leopard, CS3)

    Peter, as Thomas said, even with the .TIF extension they are indeed raw files. Ive never had any issues with either P25 or now P25+ flies opening in CR or LR.
    Perhaps a bit more info would be helpful are you seeing any previews in Bridge or just a generic file icon? Have you tried purging the cache in Bridge? Any error messages popping up?
    Ive never shot tethered so I suppose there could be something happening in C1 but it would seem unlikely that it would alter the original raw file.

  • Phase One Plus Backs

    I had no problems working with my Phase One P30 loaner back. All files woulkd open in Camera RAW 4.1 (Windows XP). I just rec'd my Plus back this afternoon and find that it is not yet supported. Any idea of when the Plus backs will be supported?
    Thanks in advance
    Don

    Once you have used Phase One's RAW processor you won;t go back to photo shop... For $79 to $450 depending upon which version you need you can solve the problem.
    The expensive one is only fully utilized with a mac wired up to the camera back during capture... the LE does most of the necessary things for $79 to $99... you need version 3.7 to be up to date. 4 is coming soon.

Maybe you are looking for

  • What's the best workflow for Home Movie Importing and Enjoying?

    I'm new to iMovie (and the mac) and have started importing all my home movies from my camcorder into iMovie. I quickly realized that movies take a huge amount of disk space and it may or may not be reasonable to import all my movies and keep them on

  • Can you set a large fetch size for the standard popup LOV

    I'm trying to increase the fetch size that the popup LOV uses when I set a LOV up for an attribute.  It seems to have a default of 25.  I don't really have the issue when I'm on a PC, but when we run the app under Safri on an IPAD it will not automat

  • Set a "mobile" scroll behaviour to a scrollable List on a desktop app

    Hi, We're looking for some help on a Flex 4.5 AIR app deployed on a touch desktop environment. We're developping a kind of a kiosk app originally made for desktop machines (mouse). Recently we've tested it on a touch screen used with a stylus or fing

  • 2 master sockets and only one needed

    Hi The homes orginial master socket is upstairs in a box room. Downstairs in the extension is another master socket which was installed by my ex-employer for work related matters only. The problem I have is that with the Home Hub 3 router being upsta

  • Serious bug in LabView 8.5 Formula Node

    Hello, Thought I would warn my fellow LabView programmers about a serious error in the Formula Node: The problem may be encountered by anyone running a non-us LabView installation: I am located in Norway, and over here we use the comma (,) as the sep