Phone not responsive after recent software update

I have just updated my phone (iPhone 5) with the most recent software update and it's now "died".  It was 100% charged and I'm now faced with an unresponsive phone which just shows the "plug to iTunes" visual.
Anyone else have the problem and know how to resolve it?
*Frustrated*
PS did it for my iPad and it went through no problems.

You're right.  Just tried for the sixth time.  Thank you.  What a productive Monday afternoon!

Similar Messages

  • Hi there can anyone help as i am unable to contact Apple for support with my printer which will not print after recent software update? this is the email i tried to send to apple with no success, can anyone help please.......Dear Apple, I'm pulling my hai

    Hi there,
    Can anyone out there help, after a recent Apple software update my Epson Stylus Photo RX640 will no longer print, every other aspect of the printer works fine including the scanner but it just will not print, I sent an email to apple but all i got was an automated reply directing me to their support page, the email i sent is below this explains in full what the problem is & what i have done to try & fix this problem.
    Dear Apple,
    I'm pulling my hair out after a recent software update from apple, since this update my Epson Stylus Photo RX640 will not print, every other function of the printer including the scanner works fine,
    Please see attached file of the error message coming up in the print queue.
    I have spent days trying to fix this, i have been onto Epsons website & followed their resolution for this error message to no avail, after contacting them again with the results i got an email back saying : In response to your email, the RX640 will use an inbox or gutenprint driver on Mac OS X 10.6.8, it is not compatible with an Epson driver.
    I have also tried re-installing drivers from original Discs for the printer but it still will not print, obviously this error has been caused by Apple's latest software update, when are Apple going to fix this problem? i need my printer working ASAP.
    Regards
    Brian
    PS i obviously can't attach the error message so here it is:    Error:/Library/Printer/Epson/inkjetprinter 2/filter/rastertoescpll.app/contents/mac os/rastertoescpll/failed
    Thank You all in advance
    Regards
    Brian

    It is hardly Apple's fault that Epson can't/won't update their driver, but at least Epson suggest that you use the Gutenprint driver, which in any case is far better that what Epson offer.
    You can get it here:
    http://gimp-print.sourceforge.net/
    You can download the latest version from here:
    http://sourceforge.net/projects/gimp-print/
    Have you downloaded the recent Apple update to Epson drivers?
    http://support.apple.com/kb/DL1398

  • Flash player not working after recent software update

    I have a MAC OSX 10.5.8, after the recent software update my flash player no longer works.
    I have read that there is a problem with security for the version of flash that I was using and this is the reason it was disabled. However, I have tried to download the most recent version from the Adobe website, but nothing happens and a message says I already have flash installed on my computer.
    I have a version of flash in my HD>>Library>>Internet plug-ins, and there is also one in HD>>Library>>Internet plug-ins (Disabled) which I have tried to move but it only lets you copy it and it seems unable to be moved back to HD>>Library>>Plug-ins
    I have also tried to download the "No Script" addon for Firefox so that I can at least have flash working in Firefox, but that doesn't seem to be downloading either.
    Please could somebody help me. I cannot now watch videos, listen to my favourite radio stations or even upload pics to ebay to create ebay listings. This problem ruining my internet enjoyment and I just hope that it can be fixed again. How dare Apple just do this without any warning or giving any info on how to easily fix this problem once flash has been disabled.
    I am not a techie so maybe there is an easy fix, but I have spent hours trying a lot of different things but nothing seems to be working.

    Please, nobody waste any time replying to this issue as the problem appears to be fixed now. I rarely restart my laptop as I usually just put it to sleep, however, I restarted it and the problem looks to have gone away. I may have fixed it with some of the things I tried, but the laptop may just have needed restarting - I'm not sure.
    But as long as the problem is resolved, I'm happy. :-)))
    Thanks anyway!

  • Lexmark P6250 scanner not working with iMac after recent software update, any ideas?

    The scanner has always worked with the iMac but after a recent software update only the printer works now.  I have searched the apple communities boards and have downloaded a variety of drivers suggested but nothing has solved the issue.
    When I load print and scan from system preferences, I select to open the scanner and the process just hangs.   I can see the scanner and am able to select to open but not able to scan.
    Any ideas on how to resolve?

    Unfortunately I have tried this and I have downloaded new drivers and restarted both the iMac and printer/scanner numerous times but I still only have the printer working.
    I have tried to use preview via system preferences, print and scan and the when I select open scanner for preview the application hangs.  I have also tried to use image capture and there is an error when selecting the scanner device of "Lexmark Language Error".  When selecting overview within image capture I am advised that the size tryng to be scanned is too large when nothing has been selected and the default setting are standard size and then image capture hangs.
    All features were working fine prior to conducting a software update about 8-10 weeks ago.  I have downloaded further software updates which I had hoped would sort this issue but it hasn't.

  • Programs won't launch & finder crashing after recent software updates

    Finder and most programs won't launch after a software update. I was able to run Cocktail and repair permissions. I've restarted a few times, and ran disk utility from the start up disk to no avail.
    Any suggestions?
    thanks

    http://www.thexlab.com/faqs/multipleappsquit.html

  • My MacBook pro did not restart after the software update

    My MacBook pro did not restart after the software update

    Kappy wrote:
    Now, were I a mindreader this wouldn't be an issue, but unfortunately, I'm not.
    WHAT??? Now that's a disappointment! I was sure the all-seeing, all-knowing Prof. Kappy would instantly discover the problem thru time and space.... 
    Ok, back to the issue at hand, the Prof. is right. In none of the OP's participation, nor in any of his choir of followers save mommy power is there the least hint of what Apple product is failing. While y'all get a move on and disgorge the details, may want to try a Safe Boot. Hold down the Shift key prior to the startup chime and wait awhile. IF it starts, then it means you have some third-party software that's causing the problem. Else there's a strong probability a complete reinstall will occur in your near future.
    In the future and in spite of what some purists may say, be sure to service the system disk BEFORE patching. By "service" I mean booting up the Mac using your Install DVD (Snow Leopard or priors) or booting in Recovery Mode (Command R, in the Lions and successors), running the Disk Utility found in that mode and doing a Repair Disk and Repair Disk Permissions. Until NO errors show up. Cause patching up an already damaged system will only make things worse.

  • My iPhone will not start after new software update. Freeze on apple screen

    I updated the phone software today through the new software update directly from the phone and it will not restart past the apple screen. I have tried a hard restart, no dice.
    wish I had waited.

    Got it back up and working by putting in recovery mode and restoring through itunes, but lost lots of settings and app. info. I took about 4 efforts to resync after restore, not sure why, certainly not smooth or intuitive. 2 hours of my life I wish I had back.

  • Problem Connecting to Internet after recent Software Updates from Apple

    I have an old iMac 15" flat panel, running OS X 10.3.9, just ran the Software Update an hour ago. Now my computer won't connect to my wireless network via the Airport. I tried to open the Internet Connect apps from Apple and it won't even load, it has this swirling beachball has been on for 15 minutes and it says "Loading Internet Connect..."
    Anybody experience something like this! Could this be another Apple blunder with their software update?
    I tried, restart, remove the plist of Internet Connect, all those did not help!
    Please help. Thanks

    Try resetting Airport as per this article;
    Resetting AirPort Express
    By the way, if your problem has not been solved then leave it as unanswered until such time it is, as you will get more responses.
    regards roam

  • Time Capsule not working after last software update

    I bought my time capsule 3 weeks ago. Set up and worked like a charm (I use airport express for my wireless network). After I downloaded the latest software updates a week or so ago, I got a message that my computer could no longer recognize my time capsule. Since then the time capsule light only flashes amber and wont appear in airport utility.
    Any ideas?
    Thanks

    I was having problems with the 7.3.1 firmware as well. For me, in manifest as though the internal disk had went bad--a blinky amber light and a "Disk needs repair" error. Rolling back the firmware solved it for me.
    To do this:
    --Open AirPort Utility.
    --Click on your TC.
    --Click on the "Manual Setup" button.
    --When the configuration summary pops up, click on the word "Version".
    --From the "Upload" drop-down list that is on the new pane that pops up, select "7.3", and click "Ok".
    --Once it reboots, it'll be at 7.3.
    Hope this helps. I'll be waiting a few weeks after 7.3.2 comes out to upgrade. I'm not real impressed with 7.3.1. As far as I can tell, it broke more than it fixed.

  • Brand New 27" iMac i5 will not boot after installing software updates

    I just purchased my new iMac 2 nights ago. I have been getting it setup with my apps, mobile me account, etc, and luckily just setup time machine and let it do a full backup.
    I just ran Software Update for the first time, and now the machine will not boot. It hangs on the grey screen for about 1 minute before the Apple logo comes up. About 30 seconds after the Apple logo comes up, the grey spinning gear shows up, and about 1 minute after that I get the grey screen of death (You must restart your computer).
    Any suggestions? A little frustrated here....

    If you mean did I receive error messages, No, I didn't. However, the desktop reverted to the default purple night-sky looking thing, my applications and such all disappeared from the dock, and I couldn't open any files or folders (you don't have permission to ...), etc. I tried signing out and back in, rebooting, using a second admin account on the computer, creating a new admin account, etc. I ran Disk Utility, hardware checker, etc. No errors were found, and nothing changed. I could see all my files and folders, but they had a small red circle in the corner, indicating "locked" or "no permission".
    I'll find the lines from the console log if that will help. The error showed up immediately and is in the computer's attempt to access the user/library/application support/sync services and same path to user/library/logs/sync services/log. (or something reasonably close to this. If you can use the exact path, I will get it) The link between my settings and files, and a password is apparently corrupted or something, so that the computer won't even let me change the desktop or any file, so I can't save, edit or discard anything, and can't drag files to another computer on the home network.
    At least I'm still under the 90 day warranty, so I can call tomorrow. At this point, the SMART check says the drive is good, so I assume it's software. The only things new are the three auto Apple software updates I installed yesterday, so I immediately suspect them. But who knows?
    Does this help you at all?

  • Quick Camera not working after 4S software update...

    After installing newest iphone 4S software update the quick camera function no longer works. Is there a solution to this problem?

    Thanks, did not realize you had to slide the camera button up! Before you just had to tap it.
    So, do you also know why the "Play, forward, and reverse" buttons" along with the slide bar "volume", show up on the same screen? (i.e. when I double click to get the quick camera button, these show up at the top of my screen directly under the Time. But I can't get them to do anything when I tap em.)  Brian

  • IBook G4 will not restart after system software update

    After updating the system software, via software update, the system will not get past the initial gray screen with the spinning dial.
    This is my daugthers computer and she is out of town working and does not have any of the system disks with her.
    Any suggestions are much appreciated.
    Thank you!
    iBook G4 Mac OS X (10.4.7)
    Yikes!   Mac OS X (10.4.3)  

    George
    Boot your computer from the install DVD, insert the DVD and shutdown the computer. Boot up while holding down the C key. Just before the install sequence you will see options in the menubar, select utilites, go to disk utility, select your target disk, verify and repair disk. You might want to verify and repair disk permissions as well. To answer your question it's not a virus as there are no viruses for MacOSX. It could be the updates did not install properly. Try that and follow with a post to let us know if that worked for you. What software update were you running when this happened?
    Joseph

  • Computer does not startup after canceled software update

    I was installing the newest version of leopard. It seems as though leopard installs the update while the computer is starting up (?), as opposed to tiger, which downloaded the update while the computer was still on.
    anyway, i was feeling impatient and decided that the update was taking to slowly and that i should just cancel it and update it later.
    however i made the stupid decision of forcing my computer to turn off (by holding down the power button)
    now whenever i try to turn on the computer, it will get to the screen with the apple and the rotating circle-thing below it
    however, it won't get past that part, i left the computer for an hour and when i got back, it was on the same startup screen
    i'd appreciate any help anyone can give me

    You damaged your OS when you did a force-quit.
    Restart your machine with your original Leopard disk in the drive while holding down the "C" key until you see the Apple.
    Then you can re-install your OS. You should back up your data to an external hard drive by doing an "archive and install" which is one of the options you will have when you begin.
    If you don't have a hard drive, you can just re-install the OS and then update again.
    Installing with first backing up is not recommended since there is always the possibility of some problem installing new software that could result in data loss.
    If you are going from Leopard 10.5 up to 10.5.2, use Apple's combo updater which should appear in Software Update.

  • Tiger does not start after failed software update

    Hi,
    I ran software update, to install updates for Tiger, 10.4.6. I got a prompt to shut the laptop down, and follow the instructions on startup of the laptop. I pressed the shut down button, I was then told by the instructions to hold down the power button until the white sleep indicator flashes, and the bar travels across the screen. I accidentally let go of the power button and it shut down halfway through the update (I cannot remember what the update was).
    Now, when I press the power button, the screen stays blank (no flash or anything), no sounds are produced, but the sleep indicator stays at half brightness, until I force shut down the laptop again (holding down the power button).
    How can I get this laptop to start up again normally?
    Thanks,
    George.

    Hi George,
    This sounds like a firmware update. Apple has a firmware restoration CD that you can make. What you do is download a disc image of the CD, burn it in another Mac, and then run it on your computer that's not working. The directions are kind of involved, so you might need to print them.
    Also, pay special attention on the firmware download page to the section where it tells you which computers it's good for. I've linked to version 1.7, but there are other versions available, too, depending on which computer you have.
    charlie

  • 2nd gen apple tv not streaming after last software update

    I have 2 2nd gen apple tvs. I updated the software to 5.0 on one but not the other.   The updated apple tv is having streaming issues with my purchased content. Netflix will stream but not my purchased tv shows or movies. Anyone else having this issue?  I tried a reset but that didn't work.   And my other apple tv which i didnt update is working fine.  Any advice would be appreciated.  Thanks!

    Damian,
    Thank you for taking the time to respond and no chance I thought that was rude.  Unfortunately I had already reset and rebooted prior to posting.  Also I have another 2nd gen apple tv and I stream netflix all the time as well as amazon prime and am not having issues so it's not my connection.  The only difference between my two apple tvs is that I upgraded the software on one (which now isn't working right) and not the other which is still functioning well!  So I am curious if anyone else has experienced this and has a solution. 
    Thanks again for your ideas and if anything else occurs to you, ping me!

Maybe you are looking for