Phone not starting on it's own - solution :)
A week or so ago, I was trying to find out why my new phone (not jailbroken or second-hand) would no longer boot up on it's own and had to be connected to the computer to get started. I was given some useful tips including how to do a complete restore, first backing up all my apps. I did this but found I still had the same problem.
Then I remembered that one of the apps also wouldn't boot up properly so I deleted it and did a re-sync. Problem solved!
So it turned out to be one bad app (for Channel Nine News in Australia). So I gave them a bum app review and I'm posting this here in case other people have the same problem.
Linda.
Restore it as a new phone and do not restore your backup. If the problem persists with no apps and no email accounts set up you have a hardware problem and need to get it fixed.
If this fixes the problem start adding your stuff back, but do not restore your backup as that will restore whatever has corrupted the phone.
Similar Messages
-
my Favorite apple,
i bought new iphone5 but Unfortunately suddenly when its finish battery not start again
the maintenance tell me that iphone has error manufactures in ic charger.so, i sent to you
to solve my problem.
best wishesWhat exactly is it that you would like from us, your fellow users in these user to user technical support forums?
Is there a technical support question somewhere in that horribly butchered English? -
Phone Not Starting after the battery was drained
My Phone's battery was drained and when connected to charge the phone it is not charging. I have kept it for hours but When I try to start my phone it does not do any thing. I am not sure if it is charging or not. Neither anything works please help me with this.
When connected to a power source hold down both the volume up and power button for around 20 seconds then leave it for around 2 hours then check - If this fails then unfortunately your only options are to either return your device to the place of purchase or contact Xperia care http://www.sonymobile.com/global-en/support/contact-us/
For a successful technology, reality must take precedence over public relations, for Nature cannot be fooled. Richard P. Feynman -
thanks for the reply mate!! However, i don't want to loose my data because there are some important content in my phone. Is there any way i can retrieve those data first and then do the factory reset/repair?? appreciate your quick response.
Try performing a system repair using PC Companion as this will often fix issues - This will factory reset your phone and erase all data
Switch off your phone and unplug from Pc (Hold volume up and power for around 10 seconds)
Start PC Companion and select Support zone then Update my phone/tablet then in Blue Repair my phone/tablet and follow the on screen instructions - When prompted connect your phone still switched off holding volume down or back button - This should start the repair or reformat process
If you are using Windows 8/8.1 or a 64bit operating system then adjust the settings for PC Companion and run in compatibility mode and chose Windows 7 or XP -
Hi,
i tryed to logon user administration(SAP) by useing url, but i forgot J2ee_admin password so user is locked then i tryed Activating the Emergency User sap* after restating consol j2ee server is not starting
pls give me proper solution.
trc file: "F:\usr\sap\DEV\DVEBMGS00\work\dev_server0", trc level: 1, release: "700"
node name : ID2750750
pid : 4584
system name : DEV
system nr. : 00
started at : Fri Jun 20 10:46:12 2008
arguments :
arg[00] : F:\usr\sap\DEV\DVEBMGS00\exe\jlaunch.exe
arg[01] : pf=F:\usr\sap\DEV\SYS\profile\DEV_DVEBMGS00_gitlsap
arg[02] : -DSAPINFO=DEV_00_server
arg[03] : pf=F:\usr\sap\DEV\SYS\profile\DEV_DVEBMGS00_gitlsap
arg[04] : -DSAPSTART=1
arg[05] : -DCONNECT_PORT=1058
arg[06] : -DSAPSYSTEM=00
arg[07] : -DSAPSYSTEMNAME=DEV
arg[08] : -DSAPMYNAME=gitlsap_DEV_00
arg[09] : -DSAPPROFILE=F:\usr\sap\DEV\SYS\profile\DEV_DVEBMGS00_gitlsap
arg[10] : -DFRFC_FALLBACK=ON
arg[11] : -DFRFC_FALLBACK_HOST=localhost
[Thr 4588] Fri Jun 20 10:46:12 2008
[Thr 4588] *** WARNING => INFO: Unknown property [instance.box.number=DEVDVEBMGS00gitlsap] [jstartxx.c 841]
[Thr 4588] *** WARNING => INFO: Unknown property [instance.en.host=gitlsap] [jstartxx.c 841]
[Thr 4588] *** WARNING => INFO: Unknown property [instance.en.port=3201] [jstartxx.c 841]
[Thr 4588] *** WARNING => INFO: Unknown property [instance.system.id=0] [jstartxx.c 841]
JStartupReadInstanceProperties: read instance properties [F:\usr\sap\DEV\DVEBMGS00\j2ee\cluster\instance.properties]
-> ms host : gitlsap
-> ms port : 3901
-> OS libs : F:\usr\sap\DEV\DVEBMGS00\j2ee\os_libs
-> Admin URL :
-> run mode : normal
-> run action : NONE
-> enabled : yes
Used property files
-> files [00] : F:\usr\sap\DEV\DVEBMGS00\j2ee\cluster\instance.properties
Instance properties
-> ms host : gitlsap
-> ms port : 3901
-> os libs : F:\usr\sap\DEV\DVEBMGS00\j2ee\os_libs
-> admin URL :
-> run mode : normal
-> run action : NONE
-> enabled : yes
Bootstrap nodes
-> [00] bootstrap : F:\usr\sap\DEV\DVEBMGS00\j2ee\cluster\instance.properties
-> [01] bootstrap_ID2750700 : F:\usr\sap\DEV\DVEBMGS00\j2ee\cluster\instance.properties
-> [02] bootstrap_ID2750750 : F:\usr\sap\DEV\DVEBMGS00\j2ee\cluster\instance.properties
Worker nodes
-> [00] ID2750700 : F:\usr\sap\DEV\DVEBMGS00\j2ee\cluster\instance.properties
-> [01] ID2750750 : F:\usr\sap\DEV\DVEBMGS00\j2ee\cluster\instance.properties
[Thr 4588] JLaunchRequestQueueInit: create named pipe for ipc
[Thr 4588] JLaunchRequestQueueInit: create pipe listener thread
[Thr 4636] JLaunchRequestFunc: Thread 4636 started as listener thread for np messages.
[Thr 4640] WaitSyncSemThread: Thread 4640 started as semaphore monitor thread.
[Thr 4588] NiInit3: NI already initialized; param 'maxHandles' ignored (1;202)
[Thr 4588] CPIC (version=700.2005.12.02)
[Thr 4588] [Node: server0] java home is set by profile parameter
Java Home: C:\j2sdk1.4.2_12
[Thr 4588] JStartupICheckFrameworkPackage: can't find framework package F:\usr\sap\DEV\DVEBMGS00\exe\jvmx.jar
JStartupIReadSection: read node properties [ID2750750]
-> node name : server0
-> node type : server
-> node execute : yes
-> jlaunch parameters :
-> java path : C:\j2sdk1.4.2_12
-> java parameters : -Djava.security.policy=./java.policy -Djava.security.egd=file:/dev/urandom -Dorg.omg.CORBA.ORBClass=com.sap.engine.system.ORBProxy -Dorg.omg.CORBA.ORBSingletonClass=com.sap.engine.system.ORBSingletonProxy -Djavax.rmi.CORBA.PortableRemoteObjectClass=com.sap.engine.system.PortableRemoteObjectProxy -Djco.jarm=1 -verbose:gc -Djava.awt.headless=true -Dsun.io.useCanonCaches=false -Dorg.omg.PortableInterceptor.ORBInitializerClass.com.sap.engine.services.ts.jts.ots.PortableInterceptor.JTSInitializer -Djava.io.tmpdir=E:\EP_TEMP -Dcm.tmpdir=E:\EP_TEMP -verbose:gc -XX:NewSize=170m -XX:MaxNewSize=170m -XX:MaxPermSize=192m -XX:PermSize=192m -XX:DisableExplicitGC -XX:UseParNewGC -XX:PrintGCDetails -XX:PrintGCTimeStamps -XX:SurvivorRatio=2 -XX:TargetSurvivorRatio=90 -XX:SoftRefLRUPolicyMSPerMB=1 -verbose:gc
-> java vm version : 1.4.2_12-b03
-> java vm vendor : Java HotSpot(TM) Server VM (Sun Microsystems Inc.)
-> java vm type : server
-> java vm cpu : x86
-> heap size : 1024M
-> init heap size : 1024M
-> root path : F:\usr\sap\DEV\DVEBMGS00\j2ee\cluster\server0
-> class path : .\bin\boot\boot.jar;.\bin\boot\jaas.jar;.\bin\system\bytecode.jar;.
-> OS libs path : F:\usr\sap\DEV\DVEBMGS00\j2ee\os_libs
-> main class : com.sap.engine.boot.Start
-> framework class : com.sap.bc.proj.jstartup.JStartupFramework
-> registr. class : com.sap.bc.proj.jstartup.JStartupNatives
-> framework path : F:\usr\sap\DEV\DVEBMGS00\exe\jstartup.jar;F:\usr\sap\DEV\DVEBMGS00\exe\jvmx.jar
-> shutdown class : com.sap.engine.boot.Start
-> parameters :
-> debuggable : no
-> debug mode : no
-> debug port : 50021
-> shutdown timeout : 120000
[Thr 4588] JLaunchISetDebugMode: set debug mode [no]
[Thr 4680] JLaunchIStartFunc: Thread 4680 started as Java VM thread.
JHVM_LoadJavaVM: VM Arguments of node [server0]
-> stack : 262144 Bytes
-> arg[ 0]: exit
-> arg[ 1]: abort
-> arg[ 2]: vfprintf
-> arg[ 3]: -Djava.security.policy=./java.policy
-> arg[ 4]: -Djava.security.egd=file:/dev/urandom
-> arg[ 5]: -Dorg.omg.CORBA.ORBClass=com.sap.engine.system.ORBProxy
-> arg[ 6]: -Dorg.omg.CORBA.ORBSingletonClass=com.sap.engine.system.ORBSingletonProxy
-> arg[ 7]: -Djavax.rmi.CORBA.PortableRemoteObjectClass=com.sap.engine.system.PortableRemoteObjectProxy
-> arg[ 8]: -Djco.jarm=1
-> arg[ 9]: -verbose:gc
-> arg[ 10]: -Djava.awt.headless=true
-> arg[ 11]: -Dsun.io.useCanonCaches=false
-> arg[ 12]: -Dorg.omg.PortableInterceptor.ORBInitializerClass.com.sap.engine.services.ts.jts.ots.PortableInterceptor.JTSInitializer
-> arg[ 13]: -Djava.io.tmpdir=E:\EP_TEMP
-> arg[ 14]: -Dcm.tmpdir=E:\EP_TEMP
-> arg[ 15]: -verbose:gc
-> arg[ 16]: -XX:NewSize=170m
-> arg[ 17]: -XX:MaxNewSize=170m
-> arg[ 18]: -XX:MaxPermSize=192m
-> arg[ 19]: -XX:PermSize=192m
-> arg[ 20]: -XX:+DisableExplicitGC
-> arg[ 21]: -XX:+UseParNewGC
-> arg[ 22]: -XX:+PrintGCDetails
-> arg[ 23]: -XX:+PrintGCTimeStamps
-> arg[ 24]: -XX:SurvivorRatio=2
-> arg[ 25]: -XX:TargetSurvivorRatio=90
-> arg[ 26]: -XX:SoftRefLRUPolicyMSPerMB=1
-> arg[ 27]: -verbose:gc
-> arg[ 28]: -Dsys.global.dir=F:\usr\sap\DEV\SYS\global
-> arg[ 29]: -Dapplication.home=F:\usr\sap\DEV\DVEBMGS00\exe
-> arg[ 30]: -Djava.class.path=F:\usr\sap\DEV\DVEBMGS00\exe\jstartup.jar;F:\usr\sap\DEV\DVEBMGS00\exe\jvmx.jar;.\bin\boot\boot.jar;.\bin\boot\jaas.jar;.\bin\system\bytecode.jar;.
-> arg[ 31]: -Djava.library.path=C:\j2sdk1.4.2_12\jre\bin\server;C:\j2sdk1.4.2_12\jre\bin;C:\j2sdk1.4.2_12\bin;F:\usr\sap\DEV\DVEBMGS00\j2ee\os_libs;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program Files\Microsoft SQL Server\90\Tools\binn\;C:\Program Files\Microsoft SQL Server\90\DTS\Binn\;C:\Program Files\Microsoft SQL Server\90\Tools\Binn\VSShell\Common7\IDE\;F:\usr\sap\DEV\SYS\exe\uc\NTI386
-> arg[ 32]: -Dmemory.manager=1024M
-> arg[ 33]: -Xmx1024M
-> arg[ 34]: -Xms1024M
-> arg[ 35]: -DLoadBalanceRestricted=no
-> arg[ 36]: -Djstartup.mode=JCONTROL
-> arg[ 37]: -Djstartup.ownProcessId=4584
-> arg[ 38]: -Djstartup.ownHardwareId=Z1228787897
-> arg[ 39]: -Djstartup.whoami=server
-> arg[ 40]: -Djstartup.debuggable=no
-> arg[ 41]: -DSAPINFO=DEV_00_server
-> arg[ 42]: -DSAPSTART=1
-> arg[ 43]: -DCONNECT_PORT=1058
-> arg[ 44]: -DSAPSYSTEM=00
-> arg[ 45]: -DSAPSYSTEMNAME=DEV
-> arg[ 46]: -DSAPMYNAME=gitlsap_DEV_00
-> arg[ 47]: -DSAPPROFILE=F:\usr\sap\DEV\SYS\profile\DEV_DVEBMGS00_gitlsap
-> arg[ 48]: -DFRFC_FALLBACK=ON
-> arg[ 49]: -DFRFC_FALLBACK_HOST=localhost
-> arg[ 50]: -DSAPSTARTUP=1
-> arg[ 51]: -DSAPSYSTEM=00
-> arg[ 52]: -DSAPSYSTEMNAME=DEV
-> arg[ 53]: -DSAPMYNAME=gitlsap_DEV_00
-> arg[ 54]: -DSAPDBHOST=GITLSAP
-> arg[ 55]: -Dj2ee.dbhost=GITLSAP
CompilerOracle: exclude com/sapportals/portal/pb/layout/taglib/ContainerTag addIviewResources
CompilerOracle: exclude com/sap/engine/services/keystore/impl/security/CodeBasedSecurityConnector getApplicationDomain
CompilerOracle: exclude com/sap/engine/services/rmi_p4/P4StubSkeletonGenerator generateStub
CompilerOracle: exclude com/sapportals/portal/prt/util/StringUtils escapeToJS
CompilerOracle: exclude com/sapportals/portal/prt/core/broker/PortalServiceItem startServices
CompilerOracle: exclude com/sap/engine/services/webservices/server/deploy/WSConfigurationHandler downloadFile
CompilerOracle: exclude com/sapportals/portal/prt/jndisupport/util/AbstractHierarchicalContext lookup
CompilerOracle: exclude com/sapportals/portal/navigation/cache/CacheNavigationNode getAttributeValue
CompilerOracle: exclude com/sapportals/portal/navigation/TopLevelNavigationiView PrintNode
CompilerOracle: exclude com/sapportals/wcm/service/ice/wcm/ICEPropertiesCoder encode
[Thr 4680] JHVM_LoadJavaVM: Java VM created OK.
JHVM_BuildArgumentList: main method arguments of node [server0]
[Thr 4836] Fri Jun 20 10:46:15 2008
[Thr 4836] JHVM_RegisterNatives: registering methods in com.sap.bc.krn.perf.PerfTimes
[Thr 4836] JHVM_RegisterNatives: registering methods in com.sap.bc.proj.jstartup.JStartupFramework
[Thr 4836] JLaunchISetClusterId: set cluster id 2750750
[Thr 4836] JLaunchISetState: change state from [Initial (0)] to [Waiting for start (1)]
[Thr 4836] JLaunchISetState: change state from [Waiting for start (1)] to [Starting (2)]
Fri Jun 20 10:46:17 2008
0.000: [GC 0.000: [ParNew: 87039K->2547K(130560K), 0.0118357 secs] 87039K->2547K(1005056K), 0.0118835 secs]
Fri Jun 20 10:46:32 2008
14.673: [GC 14.673: [ParNew: 89586K->12824K(130560K), 0.0291441 secs] 89586K->12824K(1005056K), 0.0291963 secs]
Fri Jun 20 10:46:52 2008
34.966: [GC 34.967: [ParNew: 99864K->20743K(130560K), 0.0483232 secs] 99864K->20743K(1005056K), 0.0483711 secs]
Fri Jun 20 10:46:54 2008
36.382: [GC 36.382: [ParNew: 107783K->16164K(130560K), 0.0177555 secs] 107783K->16164K(1005056K), 0.0178013 secs]
Fri Jun 20 10:47:02 2008
44.371: [GC 44.371: [ParNew: 103204K->23273K(130560K), 0.0233832 secs] 103204K->23273K(1005056K), 0.0234302 secs]
[Thr 4784] Fri Jun 20 10:47:05 2008
[Thr 4784] JLaunchIExitJava: exit hook is called (rc = -11113)
[Thr 4784] **********************************************************************
ERROR => The Java VM terminated with a non-zero exit code.
Please see SAP Note 943602 , section 'J2EE Engine exit codes'
for additional information and trouble shooting.
[Thr 4784] JLaunchCloseProgram: good bye (exitcode = -11113)
trc file: "F:\usr\sap\DEV\DVEBMGS00\work\dev_server0", trc level: 1, release: "700"
node name : ID2750750
pid : 4268
system name : DEV
system nr. : 00
started at : Fri Jun 20 10:47:07 2008
arguments :
arg[00] : F:\usr\sap\DEV\DVEBMGS00\exe\jlaunch.exe
arg[01] : pf=F:\usr\sap\DEV\SYS\profile\DEV_DVEBMGS00_gitlsap
arg[02] : -DSAPINFO=DEV_00_server
arg[03] : pf=F:\usr\sap\DEV\SYS\profile\DEV_DVEBMGS00_gitlsap
arg[04] : -DSAPSTART=1
arg[05] : -DCONNECT_PORT=1058
arg[06] : -DSAPSYSTEM=00
arg[07] : -DSAPSYSTEMNAME=DEV
arg[08] : -DSAPMYNAME=gitlsap_DEV_00
arg[09] : -DSAPPROFILE=F:\usr\sap\DEV\SYS\profile\DEV_DVEBMGS00_gitlsap
arg[10] : -DFRFC_FALLBACK=ON
arg[11] : -DFRFC_FALLBACK_HOST=localhost
[Thr 2620] Fri Jun 20 10:47:07 2008
[Thr 2620] *** WARNING => INFO: Unknown property [instance.box.number=DEVDVEBMGS00gitlsap] [jstartxx.c 841]
[Thr 2620] *** WARNING => INFO: Unknown property [instance.en.host=gitlsap] [jstartxx.c 841]
[Thr 2620] *** WARNING => INFO: Unknown property [instance.en.port=3201] [jstartxx.c 841]
[Thr 2620] *** WARNING => INFO: Unknown property [instance.system.id=0] [jstartxx.c 841]
JStartupReadInstanceProperties: read instance properties [F:\usr\sap\DEV\DVEBMGS00\j2ee\cluster\instance.properties]
-> ms host : gitlsap
-> ms port : 3901
-> OS libs : F:\usr\sap\DEV\DVEBMGS00\j2ee\os_libs
-> Admin URL :
-> run mode : normal
-> run action : NONE
-> enabled : yes
Used property files
-> files [00] : F:\usr\sap\DEV\DVEBMGS00\j2ee\cluster\instance.properties
Instance properties
-> ms host : gitlsap
-> ms port : 3901
-> os libs : F:\usr\sap\DEV\DVEBMGS00\j2ee\os_libs
-> admin URL :
-> run mode : normal
-> run action : NONE
-> enabled : yes
Bootstrap nodes
-> [00] bootstrap : F:\usr\sap\DEV\DVEBMGS00\j2ee\cluster\instance.properties
-> [01] bootstrap_ID2750700 : F:\usr\sap\DEV\DVEBMGS00\j2ee\cluster\instance.properties
-> [02] bootstrap_ID2750750 : F:\usr\sap\DEV\DVEBMGS00\j2ee\cluster\instance.properties
Worker nodes
-> [00] ID2750700 : F:\usr\sap\DEV\DVEBMGS00\j2ee\cluster\instance.properties
-> [01] ID2750750 : F:\usr\sap\DEV\DVEBMGS00\j2ee\cluster\instance.properties
[Thr 2620] JLaunchRequestQueueInit: create named pipe for ipc
[Thr 2620] JLaunchRequestQueueInit: create pipe listener thread
[Thr 716] JLaunchRequestFunc: Thread 716 started as listener thread for np messages.
[Thr 2452] WaitSyncSemThread: Thread 2452 started as semaphore monitor thread.
[Thr 2620] NiInit3: NI already initialized; param 'maxHandles' ignored (1;202)
[Thr 2620] CPIC (version=700.2005.12.02)
[Thr 2620] [Node: server0] java home is set by profile parameter
Java Home: C:\j2sdk1.4.2_12
[Thr 2620] JStartupICheckFrameworkPackage: can't find framework package F:\usr\sap\DEV\DVEBMGS00\exe\jvmx.jar
JStartupIReadSection: read node properties [ID2750750]
-> node name : server0
-> node type : server
-> node execute : yes
-> jlaunch parameters :
-> java path : C:\j2sdk1.4.2_12
-> java parameters : -Djava.security.policy=./java.policy -Djava.security.egd=file:/dev/urandom -Dorg.omg.CORBA.ORBClass=com.sap.engine.system.ORBProxy -Dorg.omg.CORBA.ORBSingletonClass=com.sap.engine.system.ORBSingletonProxy -Djavax.rmi.CORBA.PortableRemoteObjectClass=com.sap.engine.system.PortableRemoteObjectProxy -Djco.jarm=1 -verbose:gc -Djava.awt.headless=true -Dsun.io.useCanonCaches=false -Dorg.omg.PortableInterceptor.ORBInitializerClass.com.sap.engine.services.ts.jts.ots.PortableInterceptor.JTSInitializer -Djava.io.tmpdir=E:\EP_TEMP -Dcm.tmpdir=E:\EP_TEMP -verbose:gc -XX:NewSize=170m -XX:MaxNewSize=170m -XX:MaxPermSize=192m -XX:PermSize=192m -XX:DisableExplicitGC -XX:UseParNewGC -XX:PrintGCDetails -XX:PrintGCTimeStamps -XX:SurvivorRatio=2 -XX:TargetSurvivorRatio=90 -XX:SoftRefLRUPolicyMSPerMB=1 -verbose:gc
-> java vm version : 1.4.2_12-b03
-> java vm vendor : Java HotSpot(TM) Server VM (Sun Microsystems Inc.)
-> java vm type : server
-> java vm cpu : x86
-> heap size : 1024M
-> init heap size : 1024M
-> root path : F:\usr\sap\DEV\DVEBMGS00\j2ee\cluster\server0
-> class path : .\bin\boot\boot.jar;.\bin\boot\jaas.jar;.\bin\system\bytecode.jar;.
-> OS libs path : F:\usr\sap\DEV\DVEBMGS00\j2ee\os_libs
-> main class : com.sap.engine.boot.Start
-> framework class : com.sap.bc.proj.jstartup.JStartupFramework
-> registr. class : com.sap.bc.proj.jstartup.JStartupNatives
-> framework path : F:\usr\sap\DEV\DVEBMGS00\exe\jstartup.jar;F:\usr\sap\DEV\DVEBMGS00\exe\jvmx.jar
-> shutdown class : com.sap.engine.boot.Start
-> parameters :
-> debuggable : no
-> debug mode : no
-> debug port : 50021
-> shutdown timeout : 120000
[Thr 2620] JLaunchISetDebugMode: set debug mode [no]
[Thr 336] JLaunchIStartFunc: Thread 336 started as Java VM thread.
JHVM_LoadJavaVM: VM Arguments of node [server0]
-> stack : 262144 Bytes
-> arg[ 0]: exit
-> arg[ 1]: abort
-> arg[ 2]: vfprintf
-> arg[ 3]: -Djava.security.policy=./java.policy
-> arg[ 4]: -Djava.security.egd=file:/dev/urandom
-> arg[ 5]: -Dorg.omg.CORBA.ORBClass=com.sap.engine.system.ORBProxy
-> arg[ 6]: -Dorg.omg.CORBA.ORBSingletonClass=com.sap.engine.system.ORBSingletonProxy
-> arg[ 7]: -Djavax.rmi.CORBA.PortableRemoteObjectClass=com.sap.engine.system.PortableRemoteObjectProxy
-> arg[ 8]: -Djco.jarm=1
-> arg[ 9]: -verbose:gc
-> arg[ 10]: -Djava.awt.headless=true
-> arg[ 11]: -Dsun.io.useCanonCaches=false
-> arg[ 12]: -Dorg.omg.PortableInterceptor.ORBInitializerClass.com.sap.engine.services.ts.jts.ots.PortableInterceptor.JTSInitializer
-> arg[ 13]: -Djava.io.tmpdir=E:\EP_TEMP
-> arg[ 14]: -Dcm.tmpdir=E:\EP_TEMP
-> arg[ 15]: -verbose:gc
-> arg[ 16]: -XX:NewSize=170m
-> arg[ 17]: -XX:MaxNewSize=170m
-> arg[ 18]: -XX:MaxPermSize=192m
-> arg[ 19]: -XX:PermSize=192m
-> arg[ 20]: -XX:+DisableExplicitGC
-> arg[ 21]: -XX:+UseParNewGC
-> arg[ 22]: -XX:+PrintGCDetails
-> arg[ 23]: -XX:+PrintGCTimeStamps
-> arg[ 24]: -XX:SurvivorRatio=2
-> arg[ 25]: -XX:TargetSurvivorRatio=90
-> arg[ 26]: -XX:SoftRefLRUPolicyMSPerMB=1
-> arg[ 27]: -verbose:gc
-> arg[ 28]: -Dsys.global.dir=F:\usr\sap\DEV\SYS\global
-> arg[ 29]: -Dapplication.home=F:\usr\sap\DEV\DVEBMGS00\exe
-> arg[ 30]: -Djava.class.path=F:\usr\sap\DEV\DVEBMGS00\exe\jstartup.jar;F:\usr\sap\DEV\DVEBMGS00\exe\jvmx.jar;.\bin\boot\boot.jar;.\bin\boot\jaas.jar;.\bin\system\bytecode.jar;.
-> arg[ 31]: -Djava.library.path=C:\j2sdk1.4.2_12\jre\bin\server;C:\j2sdk1.4.2_12\jre\bin;C:\j2sdk1.4.2_12\bin;F:\usr\sap\DEV\DVEBMGS00\j2ee\os_libs;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program Files\Microsoft SQL Server\90\Tools\binn\;C:\Program Files\Microsoft SQL Server\90\DTS\Binn\;C:\Program Files\Microsoft SQL Server\90\Tools\Binn\VSShell\Common7\IDE\;F:\usr\sap\DEV\SYS\exe\uc\NTI386
-> arg[ 32]: -Dmemory.manager=1024M
-> arg[ 33]: -Xmx1024M
-> arg[ 34]: -Xms1024M
-> arg[ 35]: -DLoadBalanceRestricted=no
-> arg[ 36]: -Djstartup.mode=JCONTROL
-> arg[ 37]: -Djstartup.ownProcessId=4268
-> arg[ 38]: -Djstartup.ownHardwareId=Z1228787897
-> arg[ 39]: -Djstartup.whoami=server
-> arg[ 40]: -Djstartup.debuggable=no
-> arg[ 41]: -DSAPINFO=DEV_00_server
-> arg[ 42]: -DSAPSTART=1
-> arg[ 43]: -DCONNECT_PORT=1058
-> arg[ 44]: -DSAPSYSTEM=00
-> arg[ 45]: -DSAPSYSTEMNAME=DEV
-> arg[ 46]: -DSAPMYNAME=gitlsap_DEV_00
-> arg[ 47]: -DSAPPROFILE=F:\usr\sap\DEV\SYS\profile\DEV_DVEBMGS00_gitlsap
-> arg[ 48]: -DFRFC_FALLBACK=ON
-> arg[ 49]: -DFRFC_FALLBACK_HOST=localhost
-> arg[ 50]: -DSAPSTARTUP=1
-> arg[ 51]: -DSAPSYSTEM=00
-> arg[ 52]: -DSAPSYSTEMNAME=DEV
-> arg[ 53]: -DSAPMYNAME=gitlsap_DEV_00
-> arg[ 54]: -DSAPDBHOST=GITLSAP
-> arg[ 55]: -Dj2ee.dbhost=GITLSAP
CompilerOracle: exclude com/sapportals/portal/pb/layout/taglib/ContainerTag addIviewResources
CompilerOracle: exclude com/sap/engine/services/keystore/impl/security/CodeBasedSecurityConnector getApplicationDomain
CompilerOracle: exclude com/sap/engine/services/rmi_p4/P4StubSkeletonGenerator generateStub
CompilerOracle: exclude com/sapportals/portal/prt/util/StringUtils escapeToJS
CompilerOracle: exclude com/sapportals/portal/prt/core/broker/PortalServiceItem startServices
CompilerOracle: exclude com/sap/engine/services/webservices/server/deploy/WSConfigurationHandler downloadFile
CompilerOracle: exclude com/sapportals/portal/prt/jndisupport/util/AbstractHierarchicalContext lookup
CompilerOracle: exclude com/sapportals/portal/navigation/cache/CacheNavigationNode getAttributeValue
CompilerOracle: exclude com/sapportals/portal/navigation/TopLevelNavigationiView PrintNode
CompilerOracle: exclude com/sapportals/wcm/service/ice/wcm/ICEPropertiesCoder encode
[Thr 336] JHVM_LoadJavaVM: Java VM created OK.
JHVM_BuildArgumentList: main method arguments of node [server0]
[Thr 4324] Fri Jun 20 10:47:08 2008
[Thr 4324] JHVM_RegisterNatives: registering methods in com.sap.bc.krn.perf.PerfTimes
[Thr 4324] JHVM_RegisterNatives: registering methods in com.sap.bc.proj.jstartup.JStartupFramework
[Thr 4324] JLaunchISetClusterId: set cluster id 2750750
[Thr 4324] JLaunchISetState: change state from [Initial (0)] to [Waiting for start (1)]
[Thr 4324] JLaunchISetState: change state from [Waiting for start (1)] to [Starting (2)]
Fri Jun 20 10:47:09 2008
0.000: [GC 0.000: [ParNew: 87039K->2229K(130560K), 0.0062684 secs] 87039K->2229K(1005056K), 0.0063258 secs]
Fri Jun 20 10:47:17 2008
7.605: [GC 7.605: [ParNew: 89269K->12857K(130560K), 0.0286782 secs] 89269K->12857K(1005056K), 0.0287420 secs]
Fri Jun 20 10:47:35 2008
25.677: [GC 25.677: [ParNew: 99897K->20647K(130560K), 0.0477866 secs] 99897K->20647K(1005056K), 0.0478497 secs]
Fri Jun 20 10:47:36 2008
26.679: [GC 26.679: [ParNew: 107687K->16228K(130560K), 0.0184835 secs] 107687K->16228K(1005056K), 0.0185458 secs]
Fri Jun 20 10:47:42 2008
33.015: [GC 33.015: [ParNew: 103268K->23125K(130560K), 0.0250672 secs] 103268K->23125K(1005056K), 0.0251316 secs]
[Thr 4348] Fri Jun 20 10:47:45 2008
[Thr 4348] JLaunchIExitJava: exit hook is called (rc = -11113)
[Thr 4348] **********************************************************************
ERROR => The Java VM terminated with a non-zero exit code.
Please see SAP Note 943602 , section 'J2EE Engine exit codes'
for additional information and trouble shooting.
[Thr 4348] JLaunchCloseProgram: good bye (exitcode = -11113)
trc file: "F:\usr\sap\DEV\DVEBMGS00\work\dev_server0", trc level: 1, release: "700"
node name : ID2750750
pid : 4976
system name : DEV
system nr. : 00
started at : Fri Jun 20 10:47:47 2008
arguments :
arg[00] : F:\usr\sap\DEV\DVEBMGS00\exe\jlaunch.exe
arg[01] : pf=F:\usr\sap\DEV\SYS\profile\DEV_DVEBMGS00_gitlsap
arg[02] : -DSAPINFO=DEV_00_server
arg[03] : pf=F:\usr\sap\DEV\SYS\profile\DEV_DVEBMGS00_gitlsap
arg[04] : -DSAPSTART=1
arg[05] : -DCONNECT_PORT=1058
arg[06] : -DSAPSYSTEM=00
arg[07] : -DSAPSYSTEMNAME=DEV
arg[08] : -DSAPMYNAME=gitlsap_DEV_00
arg[09] : -DSAPPROFILE=F:\usr\sap\DEV\SYS\profile\DEV_DVEBMGS00_gitlsap
arg[10] : -DFRFC_FALLBACK=ON
arg[11] : -DFRFC_FALLBACK_HOST=localhost
[Thr 4980] Fri Jun 20 10:47:47 2008
[Thr 4980] *** WARNING => INFO: Unknown property [instance.box.number=DEVDVEBMGS00gitlsap] [jstartxx.c 841]
[Thr 4980] *** WARNING => INFO: Unknown property [instance.en.host=gitlsap] [jstartxx.c 841]
[Thr 4980] *** WARNING => INFO: Unknown property [instance.en.port=3201] [jstartxx.c 841]
[Thr 4980] *** WARNING => INFO: Unknown property [instance.system.id=0] [jstartxx.c 841]
JStartupReadInstanceProperties: read instance properties [F:\usr\sap\DEV\DVEBMGS00\j2ee\cluster\instance.properties]
-> ms host : gitlsap
-> ms port : 3901
-> OS libs : F:\usr\sap\DEV\DVEBMGS00\j2ee\os_libs
-> Admin URL :
-> run mode : normal
-> run action : NONE
-> enabled : yes
Used property files
-> files [00] : F:\usr\sap\DEV\DVEBMGS00\j2ee\cluster\instance.properties
Instance properties
-> ms host : gitlsap
-> ms port : 3901
-> os libs : F:\usr\sap\DEV\DVEBMGS00\j2ee\os_libs
-> admin URL :
-> run mode : normal
-> run action : NONE
-> enabled : yes
Bootstrap nodes
-> [00] bootstrap : F:\usr\sap\DEV\DVEBMGS00\j2ee\cluster\instance.properties
-> [01] bootstrap_ID2750700 : F:\usr\sap\DEV\DVEBMGS00\j2ee\cluster\instance.properties
-> [02] bootstrap_ID2750750 : F:\usr\sap\DEV\DVEBMGS00\j2ee\cluster\instance.properties
Worker nodes
-> [00] ID2750700 : F:\usr\sap\DEV\DVEBMGS00\j2ee\cluster\instance.properties
-> [01] ID2750750 : F:\usr\sap\DEV\DVEBMGS00\j2ee\cluster\instance.properties
[Thr 4980] JLaunchRequestQueueInit: create named pipe for ipc
[Thr 4980] JLaunchRequestQueueInit: create pipe listener thread
[Thr 4984] JLaunchRequestFunc: Thread 4984 started as listener thread for np messages.
[Thr 4992] WaitSyncSemThread: Thread 4992 started as semaphore monitor thread.
[Thr 4980] NiInit3: NI already initialized; param 'maxHandles' ignored (1;202)
[Thr 4980] CPIC (version=700.2005.12.02)
[Thr 4980] [Node: server0] java home is set by profile parameter
Java Home: C:\j2sdk1.4.2_12
[Thr 4980] JStartupICheckFrameworkPackage: can't find framework package F:\usr\sap\DEV\DVEBMGS00\exe\jvmx.jar
JStartupIReadSection: read node properties [ID2750750]
-> node name : server0
-> node type : server
-> node execute : yes
-> jlaunch parameters :
-> java path : C:\j2sdk1.4.2_12
-> java parameters : -Djava.security.policy=./java.policy -Djava.security.egd=file:/dev/urandom -Dorg.omg.CORBA.ORBClass=com.sap.engine.system.ORBProxy -Dorg.omg.CORBA.ORBSingletonClass=com.sap.engine.system.ORBSingletonProxy -Djavax.rmi.CORBA.PortableRemoteObjectClass=com.sap.engine.system.PortableRemoteObjectProxy -Djco.jarm=1 -verbose:gc -Djava.awt.headless=true -Dsun.io.useCanonCaches=false -Dorg.omg.PortableInterceptor.ORBInitializerClass.com.sap.engine.services.ts.jts.ots.PortableInterceptor.JTSInitializer -Djava.io.tmpdir=E:\EP_TEMP -Dcm.tmpdir=E:\EP_TEMP -verbose:gc -XX:NewSize=170m -XX:MaxNewSize=170m -XX:MaxPermSize=192m -XX:PermSize=192m -XX:DisableExplicitGC -XX:UseParNewGC -XX:PrintGCDetails -XX:PrintGCTimeStamps -XX:SurvivorRatio=2 -XX:TargetSurvivorRatio=90 -XX:SoftRefLRUPolicyMSPerMB=1 -verbose:gc
-> java vm version : 1.4.2_12-b03
-> java vm vendor : Java HotSpot(TM) Server VM (Sun Microsystems Inc.)
-> java vm type : server
-> java vm cpu : x86
-> heap size : 1024M
-> init heap size : 1024M
-> root path : F:\usr\sap\DEV\DVEBMGS00\j2ee\cluster\server0
-> class path : .\bin\boot\boot.jar;.\bin\boot\jaas.jar;.\bin\system\bytecode.jar;.
-> OS libs path : F:\usr\sap\DEV\DVEBMGS00\j2ee\os_libs
-> main class : com.sap.engine.boot.Start
-> framework class : com.sap.bc.proj.jstartup.JStartupFramework
-> registr. class : com.sap.bc.proj.jstartup.JStartupNatives
-> framework path : F:\usr\sap\DEV\DVEBMGS00\exe\jstartup.jar;F:\usr\sap\DEV\DVEBMGS00\exe\jvmx.jar
-> shutdown class : com.sap.engine.boot.Start
-> parameters :
-> debuggable : no
-> debug mode : no
-> debug port : 50021
-> shutdown timeout : 120000
[Thr 4980] JLaunchISetDebugMode: set debug mode [no]
[Thr 5008] JLaunchIStartFunc: Thread 5008 started as Java VM thread.
JHVM_LoadJavaVM: VM Arguments of node [server0]
-> stack : 262144 Bytes
-> arg[ 0]: exit
-> arg[ 1]: abort
-> arg[ 2]: vfprintf
-> arg[ 3]: -Djava.security.policy=./java.policy
-> arg[ 4]: -Djava.security.egd=file:/dev/urandom
-> arg[ 5]: -Dorg.omg.CORBA.ORBClass=com.sap.engine.system.ORBProxy
-> arg[ 6]: -Dorg.omg.CORBA.ORBSingletonClass=com.sap.engine.system.ORBSingletonProxy
-> arg[ 7]: -Djavax.rmi.CORBA.PortableRemoteObjectClass=com.sap.engine.system.PortableRemoteObjectProxy
-> arg[ 8]: -Djco.jarm=1
-> arg[ 9]: -verbose:gc
-> arg[ 10]: -Djava.awt.headless=true
-> arg[ 11]: -Dsun.io.useCanonCaches=false
-> arg[ 12]: -Dorg.omg.PortableInterceptor.ORBInitializerClass.com.sap.engine.services.ts.jts.ots.PortableInterceptor.JTSInitializer
-> arg[ 13]: -Djava.io.tmpdir=E:\EP_TEMP
-> arg[ 14]: -Dcm.tmpdir=E:\EP_TEMP
-> arg[ 15]: -verbose:gc
-> arg[ 16]: -XX:NewSize=170m
-> arg[ 17]: -XX:MaxNewSize=170m
-> arg[ 18]: -XX:MaxPermSize=192m
-> arg[ 19]: -XX:PermSize=192m
-> arg[ 20]: -XX:+DisableExplicitGC
-> arg[ 21]: -XX:+UseParNewGC
-> arg[ 22]: -XX:+PrintGCDetails
-> arg[ 23]: -XX:+PrintGCTimeStamps
-> arg[ 24]: -XX:SurvivorRatio=2
-> arg[ 25]: -XX:TargetSurvivorRatio=90
-> arg[ 26]: -XX:SoftRefLRUPolicyMSPerMB=1
-> arg[ 27]: -verbose:gc
-> arg[ 28]: -Dsys.global.dir=F:\usr\sap\DEV\SYS\global
-> arg[ 29]: -Dapplication.home=F:\usr\sap\DEV\DVEBMGS00\exe
-> arg[ 30]: -Djava.class.path=F:\usr\sap\DEV\DVEBMGS00\exe\jstartup.jar;F:\usr\sap\DEV\DVEBMGS00\exe\jvmx.jar;.\bin\boot\boot.jar;.\bin\boot\jaas.jar;.\bin\system\bytecode.jar;.
-> arg[ 31]: -Djava.library.path=C:\j2sdk1.4.2_12\jre\bin\server;C:\j2sdk1.4.2_12\jre\bin;C:\j2sdk1.4.2_12\bin;F:\usr\sap\DEV\DVEBMGS00\j2ee\os_libs;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program Files\Microsoft SQL Server\90\Tools\binn\;C:\Program Files\Microsoft SQL Server\90\DTS\Binn\;C:\Program Files\Microsoft SQL Server\90\Tools\Binn\VSShell\Common7\IDE\;F:\usr\sap\DEV\SYS\exe\uc\NTI386
-> arg[ 32]: -Dmemory.manager=1024M
-> arg[ 33]: -Xmx1024M
-> arg[ 34]: -Xms1024M
-> arg[ 35]: -DLoadBalanceRestricted=no
-> arg[ 36]: -Djstartup.mode=JCONTROL
-> arg[ 37]: -Djstartup.ownProcessId=4976
-> arg[ 38]: -Djstartup.ownHardwareId=Z1228787897
-> arg[ 39]: -Djstartup.whoami=server
-> arg[ 40]: -Djstartup.debuggable=no
-> arg[ 41]: -DSAPINFO=DEV_00_server
-> arg[ 42]: -DSAPSTART=1
-> arg[ 43]: -DCONNECT_PORT=1058
-> arg[ 44]: -DSAPSYSTEM=00
-> arg[ 45]: -DSAPSYSTEMNAME=DEV
-> arg[ 46]: -DSAPMYNAME=gitlsap_DEV_00
-> arg[ 47]: -DSAPPROFILE=F:\usr\sap\DEV\SYS\profile\DEV_DVEBMGS00_gitlsap
-> arg[ 48]: -DFRFC_FALLBACK=ON
-> arg[ 49]: -DFRFC_FALLBACK_HOST=localhost
-> arg[ 50]: -DSAPSTARTUP=1
-> arg[ 51]: -DSAPSYSTEM=00
-> arg[ 52]: -DSAPSYSTEMNAME=DEV
-> arg[ 53]: -DSAPMYNAME=gitlsap_DEV_00
-> arg[ 54]: -DSAPDBHOST=GITLSAP
-> arg[ 55]: -Dj2ee.dbhost=GITLSAP
CompilerOracle: exclude com/sapportals/portal/pb/layout/taglib/ContainerTag addIviewResources
CompilerOracle: exclude com/sap/engine/services/keystore/impl/security/CodeBasedSecurityConnector getApplicationDomain
CompilerOracle: exclude com/sap/engine/services/rmi_p4/P4StubSkeletonGenerator generateStub
CompilerOracle: exclude com/sapportals/portal/prt/util/StringUtils escapeToJS
CompilerOracle: exclude com/sapportals/portal/prt/core/broker/PortalServiceItem startServices
CompilerOracle: exclude com/sap/engine/services/webservices/server/deploy/WSConfigurationHandler downloadFile
CompilerOracle: exclude com/sapportals/portal/prt/jndisupport/util/AbstractHierarchicalContext lookup
CompilerOracle: exclude com/sapportals/portal/navigation/cache/CacheNavigationNode getAttributeValue
CompilerOracle: exclude com/sapportals/portal/navigation/TopLevelNavigationiView PrintNode
CompilerOracle: exclude com/sapportals/wcm/service/ice/wcm/ICEPropertiesCoder encode
[Thr 5008] JHVM_LoadJavaVM: Java VM created OK.
JHVM_BuildArgumentList: main method arguments of node [server0]
[Thr 5432] Fri Jun 20 10:47:48 2008
[Thr 5432] JHVM_RegisterNatives: registering methods in com.sap.bc.krn.perf.PerfTimes
[Thr 5432] JHVM_RegisterNatives: registering methods in com.sap.bc.proj.jstartup.JStartupFramework
[Thr 5432] JLaunchISetClusterId: set cluster id 2750750
[Thr 5432] JLaunchISetState: change state from [Initial (0)] to [Waiting for start (1)]
[Thr 5432] JLaunchISetState: change state from [Waiting for start (1)] to [Starting (2)]
Fri Jun 20 10:47:49 2008
0.000: [GC 0.000: [ParNew: 87039K->2273K(130560K), 0.0061543 secs] 87039K->2273K(1005056K), 0.0062119 secs]
Fri Jun 20 10:47:57 2008
7.884: [GC 7.884: [ParNew: 89308K->12922K(130560K), 0.0293603 secs] 89308K->12922K(1005056K), 0.0294226 secs]
Fri Jun 20 10:48:16 2008
26.598: [GC 26.598: [ParNew: 99962K->20706K(130560K), 0.0480863 secs] 99962K->20706K(1005056K), 0.0481492 secs]
Fri Jun 20 10:48:17 2008
27.637: [GC 27.637: [ParNew: 107746K->16310K(130560K), 0.0177637 secs] 107746K->16310K(1005056K), 0.0178252 secs]
Fri Jun 20 10:48:23 2008
34.144: [GC 34.144: [ParNew: 103350K->23193K(130560K), 0.0235084 secs] 103350K->23193K(1005056K), 0.0235719 secs]
[Thr 5140] Fri Jun 20 10:48:26 2008
[Thr 5140] JLaunchIExitJava: exit hook is called (rc = -11113)
[Thr 5140] **********************************************************************
ERROR => The Java VM terminated with a non-zero exit code.
Please see SAP Note 943602 , section 'J2EE Engine exit codes'
for additional information and trouble shooting.
[Thr 5140] JLaunchCloseProgram: good bye (exitcode = -11113)
trc file: "F:\usr\sap\DEV\DVEBMGS00\work\dev_server0", trc level: 1, release: "700"
node name : ID2750750
pid : 4824
system name : DEV
system nr. : 00
started at : Fri Jun 20 10:48:27 2008
arguments :
arg[00] : F:\usr\sap\DEV\DVEBMGS00\exe\jlaunch.exe
arg[01] : pf=F:\usr\sap\DEV\SYS\profile\DEV_DVEBMGS00_gitlsap
arg[02] : -DSAPINFO=DEV_00_server
arg[03] : pf=F:\usr\sap\DEV\SYS\profile\DEV_DVEBMGS00_gitlsap
arg[04] : -DSAPSTART=1
arg[05] : -DCONNECT_PORT=1058
arg[06] : -DSAPSYSTEM=00
arg[07] : -DSAPSYSTEMNAME=DEV
arg[08] : -DSAPMYNAME=gitlsap_DEV_00
arg[09] : -DSAPPROFILE=F:\usr\sap\DEV\SYS\profile\DEV_DVEBMGS00_gitlsap
arg[10] : -DFRFC_FALLBACK=ON
arg[11] : -DFRFC_FALLBACK_HOST=localhost
[Thr 4832] Fri Jun 20 10:48:27 2008
[Thr 4832] *** WARNING => INFO: Unknown property [instance.box.number=DEVDVEBMGS00gitlsap] [jstartxx.c 841]
[Thr 4832] *** WARNING => INFO: Unknown property [instance.en.host=gitlsap] [jstartxx.c 841]
[Thr 4832] *** WARNING => INFO: Unknown property [instance.en.port=3201] [jstartxx.c 841]
[Thr 4832] *** WARNING => INFO: Unknown property [instance.system.id=0] [jstartxx.c 841]
JStartupReadInstanceProperties: read instance properties [F:\usr\sap\DEV\DVEBMGS00\j2ee\cluster\instance.properties]
-> ms host : gitlsap
-> ms port : 3901
-> OS libs : F:\usr\sap\DEV\DVEBMGS00\j2ee\os_libs
-> Admin URL :
-> run mode : normal
-> run action : NONE
-> enabled : yes
Used property files
-> files [00] : F:\usr\sap\DEV\DVEBMGS00\j2ee\cluster\instance.properties
Instance properties
-> ms host : gitlsap
-> ms port : 3901
-> os libs : F:\usr\sap\DEV\DVEBMGS00\j2ee\os_libs
-> admin URL :
-> run mode : normal
-> run action : NONE
-> enabled : yes
Bootstrap nodes
-> [00] bootstrap : F:\usr\sap\DEV\DVEBMGS00\j2ee\cluster\instance.properties
-> [01] bootstrap_ID2750700 : F:\usr\sap\DEV\DVEBMGS00\j2ee\cluster\instance.properties
-> [02] bootstrap_ID2750750 : F:\usr\sap\DEV\DVEBMGS00\j2ee\cluster\instance.properties
Worker nodes
-> [00] ID2750700 : F:\usr\sap\DEV\DVEBMGS00\j2ee\cluster\instance.properties
-> [01] ID2750750 : F:\usr\sap\DEV\DVEBMGS00\j2ee\cluster\instance.properties
[Thr 4832] JLaunchRequestQueueInit: create named pipe for ipc
[Thr 4832] JLaunchRequestQueueInit: create pipe listener thread
[Thr 4848] JLaunchRequestFunc: Thread 4848 started as listener thread for np messages.
[Thr 4844] WaitSyncSemThread: Thread 4844 started as semaphore monitor thread.
[Thr 4832] NiInit3: NI already initialized; param 'maxHandles' ignored (1;202)
[Thr 4832] CPIC (version=700.2005.12.02)
[Thr 4832] [Node: server0] java home is set by profile parameter
Java Home: C:\j2sdk1.4.2_12
[Thr 4832] JStartupICheckFrameworkPackage: can't find framework package F:\usr\sap\DEV\DVEBMGS00\exe\jvmx.jar
JStartupIReadSection: read node properties [ID2750750]
-> node name : server0
-> node type : server
-> node execute : yes
-> jlaunch parameters :
-> java path : C:\j2sdk1.4.2_12
-> java parameters : -Djava.security.policy=./java.policy -Djava.security.egd=file:/dev/urandom -Dorg.omg.CORBA.ORBClass=com.sap.engine.system.ORBProxy -Dorg.omg.CORBA.ORBSingletonClass=com.sap.engine.system.ORBSingletonProxy -Djavax.rmi.CORBA.PortableRemoteObjectClass=com.sap.engine.system.PortableRemoteObjectProxy -Djco.jarm=1 -verbose:gc -Djava.awt.headless=true -Dsun.io.useCanonCaches=false -Dorg.omg.PortableInterceptor.ORBInitializerClass.com.sap.engine.services.ts.jts.ots.PortableInterceptor.JTSInitializer -Djava.io.tmpdir=E:\EP_TEMP -Dcm.tmpdir=E:\EP_TEMP -verbose:gc -XX:NewSize=170m -XX:MaxNewSize=170m -XX:MaxPermSize=192m -XX:PermSize=192m -XX:DisableExplicitGC -XX:UseParNewGC -XX:PrintGCDetails -XX:PrintGCTimeStamps -XX:SurvivorRatio=2 -XX:TargetSurvivorRatio=90 -XX:SoftRefLRUPolicyMSPerMB=1 -verbose:gc
-> java vm version : 1.4.2_12-b03
-> java vm vendor : Java HotSpot(TM) Server VM (Sun Microsystems Inc.)
-> java vm type : server
-> java vm cpu : x86
-> heap size : 1024M
-> init heap size : 1024M
-> root path : F:\usr\sap\DEV\DVEBMGS00\j2ee\cluster\server0
-> class path : .\bin\boot\boot.jar;.\bin\boot\jaas.jar;.\bin\system\bytecode.jar;.
-> OS libs path : F:\usr\sap\DEV\DVEBMGS00\j2ee\os_libs
-> main class : com.sap.engine.boot.Start
-> framework class : com.sap.bc.proj.jstartup.JStartupFramework
-> registr. class : com.sap.bc.proj.jstartup.JStartupNatives
-> framework path : F:\usr\sap\DEV\DVEBMGS00\exe\jstartup.jar;F:\usr\sap\DEV\DVEBMGS00\exe\jvmx.jar
-> shutdown class : com.sap.engine.boot.Start
-> parameters :
-> debuggable : no
-> debug mode : no
-> debug port : 50021
-> shutdown timeout : 120000
[Thr 4832] JLaunchISetDebugMode: set debug mode [no]
[Thr 5180] JLaunchIStartFunc: Thread 5180 started as Java VM thread.
JHVM_LoadJavaVM: VM Arguments of node [server0]
-> stack : 262144 Bytes
-> arg[ 0]: exit
-> arg[ 1]: abort
-> arg[ 2]: vfprintf
-> arg[ 3]: -Djava.security.policy=./java.policy
-> arg[ 4]: -Djava.security.egd=file:/dev/urandom
-> arg[ 5]: -Dorg.omg.CORBA.ORBClass=com.sap.engine.system.ORBProxy
-> arg[ 6]: -Dorg.omg.CORBA.ORBSingletonClass=com.sap.engine.system.ORBSingletonProxy
-> arg[ 7]: -Djavax.rmi.CORBA.PortableRemoteObjectClass=com.sap.engine.system.PortableRemoteObjectProxy
-> arg[ 8]: -Djco.jarm=1
-> arg[ 9]: -verbose:gc
-> arg[ 10]: -Djava.awt.headless=true
-> arg[ 11]: -Dsun.io.useCanonCaches=false
-> arg[ 12]: -Dorg.omg.PortableInterceptor.ORBInitializerClass.com.sap.engine.services.ts.jts.ots.PortableInterceptor.JTSInitializer
-> arg[ 13]: -Djava.io.tmpdir=E:\EP_TEMP
-> arg[ 14]: -Dcm.tmpdir=E:\EP_TEMP
-> arg[ 15]: -verbose:gc
-> arg[ 16]: -XX:NewSize=170m
-> arg[ 17]: -XX:MaxNewSize=170m
-> arg[ 18]: -XX:MaxPermSize=192m
-> arg[ 19]: -XX:PermSize=192m
-> arg[ 20]: -XX:+DisableExplicitGC
-> arg[ 21]: -XX:+UseParNewGC
-> arg[ 22]: -XX:+PrintGCDetails
-> arg[ 23]: -XX:+PrintGCTimeStamps
-> arg[ 24]: -XX:SurvivorRatio=2
-> arg[ 25]: -XX:TargetSurvivorRatio=90
-> arg[ 26]: -XX:SoftRefLRUPolicyMSPerMB=1
-> arg[ 27]: -verbose:gc
-> arg[ 28]: -Dsys.global.dir=F:\usr\sap\DEV\SYS\global
-> arg[ 29]: -Dapplication.home=F:\usr\sap\DEV\DVEBMGS00\exe
-> arg[ 30]: -Djava.class.path=F:\usr\sap\DEV\DVEBMGS00\exe\jstartup.jar;F:\usr\sap\DEV\DVEBMGS00\exe\jvmx.jar;.\bin\boot\boot.jar;.\bin\boot\jaas.jar;.\bin\system\bytecode.jar;.
-> arg[ 31]: -Djava.library.path=C:\j2sdk1.4.2_12\jre\bin\server;C:\j2sdk1.4.2_12\jre\bin;C:\j2sdk1.4.2_12\bin;F:\usr\sap\DEV\DVEBMGS00\j2ee\os_libs;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program Files\Microsoft SQL Server\90\Tools\binn\;C:\Program Files\Microsoft SQL Server\90\DTS\Binn\;C:\Program Files\Microsoft SQL Server\90\Tools\Binn\VSShell\Common7\IDE\;F:\usr\sap\DEV\SYS\exe\uc\NTI386
-> arg[ 32]: -Dmemory.manager=1024M
-> arg[ 33]: -Xmx1024M
-> arg[ 34]: -Xms1024M
-> arg[ 35]: -DLoadBalanceRestricted=no
-> arg[ 36]: -Djstartup.mode=JCONTROL
-> arg[ 37]: -Djstartup.ownProcessId=4824
-> arg[ 38]: -Djstartup.ownHardwareId=Z1228787897
-> arg[ 39]: -Djstartup.whoami=server
-> arg[ 40]: -Djstartup.debuggable=no
-> arg[ 41]: -DSAPINFO=DEV_00_server
-> arg[ 42]: -DSAPSTART=1
-> arg[ 43]: -DCONNECT_PORT=1058
-> arg[ 44]: -DSAPSYSTEM=00
-> arg[ 45]: -DSAPSYSTEMNAME=DEV
-> arg[ 46]: -DSAPMYNAME=gitlsap_DEV_00
-> arg[ 47]: -DSAPPROFILE=F:\usr\sap\DEV\SYS\profile\DEV_DVEBMGS00_gitlsap
-> arg[ 48]: -DFRFC_FALLBACK=ON
-> arg[ 49]: -DFRFC_FALLBACK_HOST=localhost
-> arg[ 50]: -DSAPSTARTUP=1
-> arg[ 51]: -DSAPSYSTEM=00
-> arg[ 52]: -DSAPSYSTEMNAME=DEV
-> arg[ 53]: -DSAPMYNAME=gitlsap_DEV_00
-> arg[ 54]: -DSAPDBHOST=GITLSAP
-> arg[ 55]: -Dj2ee.dbhost=GITLSAP
CompilerOracle: exclude com/sapportals/portal/pb/layout/taglib/ContainerTag addIviewResources
CompilerOracle: exclude com/sap/engine/services/keystore/impl/security/CodeBasedSecurityConnector getApplicationDomain
CompilerOracle: exclude com/sap/engine/services/rmi_p4/P4StubSkeletonGenerator generateStub
CompilerOracle: exclude com/sapportals/portal/prt/util/StringUtils escapeToJS
CompilerOracle: exclude com/sapportals/portal/prt/core/broker/PortalServiceItem startServices
CompilerOracle: exclude com/sap/engine/services/webservices/server/deploy/WSConfigurationHandler downloadFile
CompilerOracle: exclude com/sapportals/portal/prt/jndisupport/util/AbstractHierarchicalContext lookup
CompilerOracle: exclude com/sapportals/portal/navigation/cache/CacheNavigationNode getAttributeValue
CompilerOracle: exclude com/sapportals/portal/navigation/TopLevelNavigationiView PrintNode
CompilerOracle: exclude com/sapportals/wcm/service/ice/wcm/ICEPropertiesCoder encode
[Thr 5180] JHVM_LoadJavaVM: Java VM created OK.
JHVM_BuildArgumentList: main method arguments of node [server0]
[Thr 5764] Fri Jun 20 10:48:28 2008
[Thr 5764] JHVM_RegisterNatives: registering methods in com.sap.bc.krn.perf.PerfTimes
[Thr 5764] JHVM_RegisterNatives: registering methods in com.sap.bc.proj.jstartup.JStartupFramework
[Thr 5764] JLaunchISetClusterId: set cluster id 2750750
[Thr 5764] JLaunchISetState: change state from [Initial (0)] to [Waiting for start (1)]
[Thr 5764] JLaunchISetState: change state from [Waiting for start (1)] to [Starting (2)]
Fri Jun 20 10:48:29 2008
0.000: [GC 0.000: [ParNew: 87040K->2321K(130560K), 0.0095060 secs] 87040K->2321K(1005056K), 0.0095677 secs]
[Thr 5472] Fri Jun 20 10:48:34 2008
[Thr 5472] JLaunchIExitJava: exit hook is called (rc = -11113)
[Thr 5472] **********************************************************************
ERROR => The Java VM terminated with a non-zero exit code.
Please see SAP Note 943602 , section 'J2EE Engine exit codes'
for additional information and trouble shooting.
[Thr 5472] JLaunchCloseProgram: good bye (exitcode = -11113)
trc file: "F:\usr\sap\DEV\DVEBMGS00\work\dev_server0", trc level: 1, release: "700"
node name : ID2750750
pid : 716
system name : DEV
system nr. : 00
started at : Fri Jun 20 10:50:27 2008
arguments :
arg[00] : F:\usr\sap\DEV\DVEBMGS00\exe\jlaunch.exe
arg[01] : pf=F:\usr\sap\DEV\SYS\profile\DEV_DVEBMGS00_gitlsap
arg[02] : -DSAPINFO=DEV_00_server
arg[03] : pf=F:\usr\sap\DEV\SYS\profile\DEV_DVEBMGS00_gitlsap
arg[04] : -DSAPSTART=1
arg[05] : -DCONNECT_PORT=1058
arg[06] : -DSAPSYSTEM=00
arg[07] : -DSAPSYSTEMNAME=DEV
arg[08] : -DSAPMYNAME=gitlsap_DEV_00
arg[09] : -DSAPPROFILE=F:\usr\sap\DEV\SYS\profile\DEV_DVEBMGS00_gitlsap
arg[10] : -DFRFC_FALLBACK=ON
arg[11] : -DFRFC_FALLBACK_HOST=localhost
[Thr 1324] Fri Jun 20 10:50:27 2008
[Thr 1324] *** WARNING => INFO: Unknown property [instance.box.number=DEVDVEBMGS00gitlsap] [jstartxx.c 841]
[Thr 1324] *** WARNING => INFO: Unknown property [instance.en.host=gitlsap] [jstartxx.c 841]
[Thr 1324] *** WARNING => INFO: Unknown property [instance.en.port=3201] [jstartxx.c 841]
[Thr 1324] *** WARNING => INFO: Unknown property [instance.system.id=0] [jstartxx.c 841]
JStartupReadInstanceProperties: read instance properties [F:\usr\sap\DEV\DVEBMGS00\j2ee\cluster\instance.properties]
-> ms host : gitlsap
-> ms port : 3901
-> OS libs : F:\usr\sap\DEV\DVEBMGS00\j2ee\os_libs
-> Admin URL :
-> run mode : normal
-> run action : NONE
-> enabled : yes
Used property files
-> files [00] : F:\usr\sap\DEV\DVEBMGS00\j2ee\cluster\instance.properties
Instance properties
-> ms host : gitlsap
-> ms port : 3901
-> os libs : F:\usr\sap\DEV\DVEBMGS00\j2ee\os_libs
-> admin URL :
-> run mode : normal
-> run action : NONE
-> enabled : yes
Bootstrap nodes
-> [00] bootstrap : F:\usr\sap\DEV\DVEBMGS00\j2ee\cluster\instance.properties
-> [01] bootstrap_ID2750700 : F:\usr\sap\DEV\DVEBMGS00\j2ee\cluster\instance.properties
-> [02] bootstrap_ID2750750 : F:\usr\sap\DEV\DVEBMGS00\j2ee\cluster\instance.properties
Worker nodes
-> [00] ID2750700Hi Siddhesh,
i am sending dev_jcontrol file.
Thanks,
Sushma
trc file: "F:\usr\sap\DEV\DVEBMGS00\work\dev_jcontrol", trc level: 1, release: "700"
node name : jcontrol
pid : 3012
system name : DEV
system nr. : 00
started at : Fri Jun 20 15:19:02 2008
arguments :
arg[00] : F:\usr\sap\DEV\DVEBMGS00\exe\jcontrol.EXE
arg[01] : pf=F:\usr\sap\DEV\SYS\profile\DEV_DVEBMGS00_gitlsap
arg[02] : -DSAPSTART=1
arg[03] : -DCONNECT_PORT=1050
arg[04] : -DSAPSYSTEM=00
arg[05] : -DSAPSYSTEMNAME=DEV
arg[06] : -DSAPMYNAME=gitlsap_DEV_00
arg[07] : -DSAPPROFILE=F:\usr\sap\DEV\SYS\profile\DEV_DVEBMGS00_gitlsap
arg[08] : -DFRFC_FALLBACK=ON
arg[09] : -DFRFC_FALLBACK_HOST=localhost
[Thr 3096] Fri Jun 20 15:19:02 2008
[Thr 3096] *** WARNING => INFO: Unknown property [instance.box.number=DEVDVEBMGS00gitlsap] [jstartxx.c 841]
[Thr 3096] *** WARNING => INFO: Unknown property [instance.en.host=gitlsap] [jstartxx.c 841]
[Thr 3096] *** WARNING => INFO: Unknown property [instance.en.port=3201] [jstartxx.c 841]
[Thr 3096] *** WARNING => INFO: Unknown property [instance.system.id=0] [jstartxx.c 841]
JStartupReadInstanceProperties: read instance properties [F:\usr\sap\DEV\DVEBMGS00\j2ee\cluster\instance.properties;F:\usr\sap\DEV\DVEBMGS00\SDM\program\config\sdm_jstartup.properties]
-> ms host : gitlsap
-> ms port : 3901
-> OS libs : F:\usr\sap\DEV\DVEBMGS00\j2ee\os_libs
-> Admin URL :
-> run mode : normal
-> run action : NONE
-> enabled : yes
Used property files
-> files [00] : F:\usr\sap\DEV\DVEBMGS00\j2ee\cluster\instance.properties
-> files [01] : F:\usr\sap\DEV\DVEBMGS00\SDM\program\config\sdm_jstartup.properties
Instance properties
-> ms host : gitlsap
-> ms port : 3901
-> os libs : F:\usr\sap\DEV\DVEBMGS00\j2ee\os_libs
-> admin URL :
-> run mode : normal
-> run action : NONE
-> enabled : yes
Bootstrap nodes
-> [00] bootstrap : F:\usr\sap\DEV\DVEBMGS00\j2ee\cluster\instance.properties
-> [01] bootstrap_ID2750700 : F:\usr\sap\DEV\DVEBMGS00\j2ee\cluster\instance.properties
-> [02] bootstrap_ID2750750 : F:\usr\sap\DEV\DVEBMGS00\j2ee\cluster\instance.properties
Worker nodes
-> [00] ID2750700 : F:\usr\sap\DEV\DVEBMGS00\j2ee\cluster\instance.properties
-> [01] ID2750750 : F:\usr\sap\DEV\DVEBMGS00\j2ee\cluster\instance.properties
-> [02] sdm : F:\usr\sap\DEV\DVEBMGS00\SDM\program\config\sdm_jstartup.properties
[Thr 3096] JControlExecuteBootstrap: execute bootstrap process [bootstrap]
[Thr 3136] JControlDPMessageFunc: Thread 3136 started as handler thread for R/3 dispatcher messages.
[Thr 3096] [Node: bootstrap] java home is set by profile parameter
Java Home: C:\j2sdk1.4.2_12
[Thr 3096] JStartupICheckFrameworkPackage: can't find framework package F:\usr\sap\DEV\DVEBMGS00\exe\jvmx.jar
JStartupIReadSection: read node properties [bootstrap]
-> node name : bootstrap
-> node type : bootstrap
-> node execute : yes
-> java path : C:\j2sdk1.4.2_12
-> java parameters : -Djco.jarm=1
-> java vm version : 1.4.2_12-b03
-> java vm vendor : Java HotSpot(TM) Server VM (Sun Microsystems Inc.)
-> java vm type : server
-> java vm cpu : x86
-> heap size : 512M
-> root path : F:\usr\sap\DEV\DVEBMGS00\j2ee\cluster
-> class path : .\bootstrap\launcher.jar
-> OS libs path : F:\usr\sap\DEV\DVEBMGS00\j2ee\os_libs
-> main class : com.sap.engine.offline.OfflineToolStart
-> framework class : com.sap.bc.proj.jstartup.JStartupFramework
-> registr. class : com.sap.bc.proj.jstartup.JStartupNatives
-> framework path : F:\usr\sap\DEV\DVEBMGS00\exe\jstartup.jar;F:\usr\sap\DEV\DVEBMGS00\exe\jvmx.jar
-> parameters : com.sap.engine.bootstrap.Bootstrap ./bootstrap ID0027507
-> debuggable : yes
-> debug mode : no
-> debug port : 60000
-> shutdown timeout : 120000
JControlStartJLaunch: program = F:\usr\sap\DEV\DVEBMGS00\exe\jlaunch.exe
-> arg[00] = F:\usr\sap\DEV\DVEBMGS00\exe\jlaunch.exe
-> arg[01] = pf=F:\usr\sap\DEV\SYS\profile\DEV_DVEBMGS00_gitlsap
-> arg[02] = -DSAPINFO=DEV_00_bootstrap
-> arg[03] = -nodeId=-1
-> arg[04] = -file=F:\usr\sap\DEV\DVEBMGS00\j2ee\cluster\instance.properties
-> arg[05] = -syncSem=JSTARTUP_WAIT_ON_3012
-> arg[06] = -nodeName=bootstrap
-> arg[07] = -jvmOutFile=F:\usr\sap\DEV\DVEBMGS00\work\jvm_bootstrap.out
-> arg[08] = -stdOutFile=F:\usr\sap\DEV\DVEBMGS00\work\std_bootstrap.out
-> arg[09] = -locOutFile=F:\usr\sap\DEV\DVEBMGS00\work\dev_bootstrap
-> arg[10] = -mode=BOOTSTRAP
-> arg[11] = pf=F:\usr\sap\DEV\SYS\profile\DEV_DVEBMGS00_gitlsap
-> arg[12] = -DSAPSTART=1
-> arg[13] = -DCONNECT_PORT=1055
-> arg[14] = -DSAPSYSTEM=00
-> arg[15] = -DSAPSYSTEMNAME=DEV
-> arg[16] = -DSAPMYNAME=gitlsap_DEV_00
-> arg[17] = -DSAPPROFILE=F:\usr\sap\DEV\SYS\profile\DEV_DVEBMGS00_gitlsap
-> arg[18] = -DFRFC_FALLBACK=ON
-> arg[19] = -DFRFC_FALLBACK_HOST=localhost
-> lib path = PATH=C:\j2sdk1.4.2_12\jre\bin\server;C:\j2sdk1.4.2_12\jre\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program Files\Microsoft SQL Server\90\Tools\binn\;C:\Program Files\Microsoft SQL Server\90\DTS\Binn\;C:\Program Files\Microsoft SQL Server\90\Tools\Binn\VSShell\Common7\IDE\;F:\usr\sap\DEV\SYS\exe\uc\NTI386
-> exe path = PATH=C:\j2sdk1.4.2_12\bin;F:\usr\sap\DEV\DVEBMGS00\j2ee\os_libs;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program Files\Microsoft SQL Server\90\Tools\binn\;C:\Program Files\Microsoft SQL Server\90\DTS\Binn\;C:\Program Files\Microsoft SQL Server\90\Tools\Binn\VSShell\Common7\IDE\;F:\usr\sap\DEV\SYS\exe\uc\NTI386
[Thr 3096] Fri Jun 20 15:19:10 2008
[Thr 3096] JControlExecuteBootstrap: read instance values after global bootstrap
[Thr 3096] *** WARNING => INFO: Unknown property [instance.box.number=DEVDVEBMGS00gitlsap] [jstartxx.c 841]
[Thr 3096] *** WARNING => INFO: Unknown property [instance.en.host=gitlsap] [jstartxx.c 841]
[Thr 3096] *** WARNING => INFO: Unknown property [instance.en.port=3201] [jstartxx.c 841]
[Thr 3096] *** WARNING => INFO: Unknown property [instance.system.id=0] [jstartxx.c 841]
JStartupReadInstanceProperties: read instance properties [F:\usr\sap\DEV\DVEBMGS00\j2ee\cluster\instance.properties;F:\usr\sap\DEV\DVEBMGS00\SDM\program\config\sdm_jstartup.properties]
-> ms host : gitlsap
-> ms port : 3901
-> OS libs : F:\usr\sap\DEV\DVEBMGS00\j2ee\os_libs
-> Admin URL :
-> run mode : normal
-> run action : NONE
-> enabled : yes
[Thr 3096] JControlExecuteBootstrap: enumerate the nodes after global bootstrap
Used property files
-> files [00] : F:\usr\sap\DEV\DVEBMGS00\j2ee\cluster\instance.properties
-> files [01] : F:\usr\sap\DEV\DVEBMGS00\SDM\program\config\sdm_jstartup.properties
Instance properties
-> ms host : gitlsap
-> ms port : 3901
-> os libs : F:\usr\sap\DEV\DVEBMGS00\j2ee\os_libs
-> admin URL :
-> run mode : normal
-> run action : NONE
-> enabled : yes
Bootstrap nodes
-> [00] bootstrap : F:\usr\sap\DEV\DVEBMGS00\j2ee\cluster\instance.properties
-> [01] bootstrap_ID2750700 : F:\usr\sap\DEV\DVEBMGS00\j2ee\cluster\instance.properties
-> [02] bootstrap_ID2750750 : F:\usr\sap\DEV\DVEBMGS00\j2ee\cluster\instance.properties
Worker nodes
-> [00] ID2750700 : F:\usr\sap\DEV\DVEBMGS00\j2ee\cluster\instance.properties
-> [01] ID2750750 : F:\usr\sap\DEV\DVEBMGS00\j2ee\cluster\instance.properties
-> [02] sdm : F:\usr\sap\DEV\DVEBMGS00\SDM\program\config\sdm_jstartup.properties
[Thr 3096] JControlExecuteBootstrap: execute bootstrap process [bootstrap_ID2750700]
[Thr 3096] [Node: dispatcher bootstrap] java home is set by profile parameter
Java Home: C:\j2sdk1.4.2_12
[Thr 3096] JStartupICheckFrameworkPackage: can't find framework package F:\usr\sap\DEV\DVEBMGS00\exe\jvmx.jar
JStartupIReadSection: read node properties [bootstrap_ID2750700]
-> node name : dispatcher bootstrap
-> node type : bootstrap
-> node execute : yes
-> jlaunch parameters :
-> java path : C:\j2sdk1.4.2_12
-> java parameters : -Djco.jarm=1
-> java vm version : 1.4.2_12-b03
-> java vm vendor : Java HotSpot(TM) Server VM (Sun Microsystems Inc.)
-> java vm type : server
-> java vm cpu : x86
-> heap size : 256M
-> root path : F:\usr\sap\DEV\DVEBMGS00\j2ee\cluster
-> class path : .\bootstrap\launcher.jar
-> OS libs path : F:\usr\sap\DEV\DVEBMGS00\j2ee\os_libs
-> main class : com.sap.engine.offline.OfflineToolStart
-> framework class : com.sap.bc.proj.jstartup.JStartupFramework
-> registr. class : com.sap.bc.proj.jstartup.JStartupNatives
-> framework path : F:\usr\sap\DEV\DVEBMGS00\exe\jstartup.jar;F:\usr\sap\DEV\DVEBMGS00\exe\jvmx.jar
-> parameters : com.sap.engine.bootstrap.Bootstrap ./bootstrap ID002750700
-> debuggable : yes
-> debug mode : no
-> debug port : 60000
-> shutdown timeout : 120000
JControlStartJLaunch: program = F:\usr\sap\DEV\DVEBMGS00\exe\jlaunch.exe
-> arg[00] = F:\usr\sap\DEV\DVEBMGS00\exe\jlaunch.exe
-> arg[01] = pf=F:\usr\sap\DEV\SYS\profile\DEV_DVEBMGS00_gitlsap
-> arg[02] = -DSAPINFO=DEV_00_bootstrap
-> arg[03] = -nodeId=-1
-> arg[04] = -file=F:\usr\sap\DEV\DVEBMGS00\j2ee\cluster\instance.properties
-> arg[05] = -syncSem=JSTARTUP_WAIT_ON_3012
-> arg[06] = -nodeName=bootstrap_ID2750700
-> arg[07] = -jvmOutFile=F:\usr\sap\DEV\DVEBMGS00\work\jvm_bootstrap_ID2750700.out
-> arg[08] = -stdOutFile=F:\usr\sap\DEV\DVEBMGS00\work\std_bootstrap_ID2750700.out
-> arg[09] = -locOutFile=F:\usr\sap\DEV\DVEBMGS00\work\dev_bootstrap_ID2750700
-> arg[10] = -mode=BOOTSTRAP
-> arg[11] = pf=F:\usr\sap\DEV\SYS\profile\DEV_DVEBMGS00_gitlsap
-> arg[12] = -DSAPSTART=1
-> arg[13] = -DCONNECT_PORT=1055
-> arg[14] = -DSAPSYSTEM=00
-> arg[15] = -DSAPSYSTEMNAME=DEV
-> arg[16] = -DSAPMYNAME=gitlsap_DEV_00
-> arg[17] = -DSAPPROFILE=F:\usr\sap\DEV\SYS\profile\DEV_DVEBMGS00_gitlsap
-> arg[18] = -DFRFC_FALLBACK=ON
-> arg[19] = -DFRFC_FALLBACK_HOST=localhost
-> lib path = PATH=C:\j2sdk1.4.2_12\jre\bin\server;C:\j2sdk1.4.2_12\jre\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program Files\Microsoft SQL Server\90\Tools\binn\;C:\Program Files\Microsoft SQL Server\90\DTS\Binn\;C:\Program Files\Microsoft SQL Server\90\Tools\Binn\VSShell\Common7\IDE\;F:\usr\sap\DEV\SYS\exe\uc\NTI386
-> exe path = PATH=C:\j2sdk1.4.2_12\bin;F:\usr\sap\DEV\DVEBMGS00\j2ee\os_libs;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program Files\Microsoft SQL Server\90\Tools\binn\;C:\Program Files\Microsoft SQL Server\90\DTS\Binn\;C:\Program Files\Microsoft SQL Server\90\Tools\Binn\VSShell\Common7\IDE\;F:\usr\sap\DEV\SYS\exe\uc\NTI386
[Thr 3096] Fri Jun 20 15:19:13 2008
[Thr 3096] JControlExecuteBootstrap: execute bootstrap process [bootstrap_ID2750750]
[Thr 3096] [Node: server0 bootstrap] java home is set by profile parameter
Java Home: C:\j2sdk1.4.2_12
[Thr 3096] JStartupICheckFrameworkPackage: can't find framework package F:\usr\sap\DEV\DVEBMGS00\exe\jvmx.jar
JStartupIReadSection: read node properties [bootstrap_ID2750750]
-> node name : server0 bootstrap
-> node type : bootstrap
-> node execute : yes
-> jlaunch parameters :
-> java path : C:\j2sdk1.4.2_12
-> java parameters : -Djco.jarm=1
-> java vm version : 1.4.2_12-b03
-> java vm vendor : Java HotSpot(TM) Server VM (Sun Microsystems Inc.)
-> java vm type : server
-> java vm cpu : x86
-> heap size : 256M
-> root path : F:\usr\sap\DEV\DVEBMGS00\j2ee\cluster
-> class path : .\bootstrap\launcher.jar
-> OS libs path : F:\usr\sap\DEV\DVEBMGS00\j2ee\os_libs
-> main class : com.sap.engine.offline.OfflineToolStart
-> framework class : com.sap.bc.proj.jstartup.JStartupFramework
-> registr. class : com.sap.bc.proj.jstartup.JStartupNatives
-> framework path : F:\usr\sap\DEV\DVEBMGS00\exe\jstartup.jar;F:\usr\sap\DEV\DVEBMGS00\exe\jvmx.jar
-> parameters : com.sap.engine.bootstrap.Bootstrap ./bootstrap ID002750750
-> debuggable : yes
-> debug mode : no
-> debug port : 60000
-> shutdown timeout : 120000
JControlStartJLaunch: program = F:\usr\sap\DEV\DVEBMGS00\exe\jlaunch.exe
-> arg[00] = F:\usr\sap\DEV\DVEBMGS00\exe\jlaunch.exe
-> arg[01] = pf=F:\usr\sap\DEV\SYS\profile\DEV_DVEBMGS00_gitlsap
-> arg[02] = -DSAPINFO=DEV_00_bootstrap
-> arg[03] = -nodeId=-1
-> arg[04] = -file=F:\usr\sap\DEV\DVEBMGS00\j2ee\cluster\instance.properties
-> arg[05] = -syncSem=JSTARTUP_WAIT_ON_3012
-> arg[06] = -nodeName=bootstrap_ID2750750
-> arg[07] = -jvmOutFile=F:\usr\sap\DEV\DVEBMGS00\work\jvm_bootstrap_ID2750750.out
-> arg[08] = -stdOutFile=F:\usr\sap\DEV\DVEBMGS00\work\std_bootstrap_ID2750750.out
-> arg[09] = -locOutFile=F:\usr\sap\DEV\DVEBMGS00\work\dev_bootstrap_ID2750750
-> arg[10] = -mode=BOOTSTRAP
-> arg[11] = pf=F:\usr\sap\DEV\SYS\profile\DEV_DVEBMGS00_gitlsap
-> arg[12] = -DSAPSTART=1
-> arg[13] = -DCONNECT_PORT=1055
-> arg[14] = -DSAPSYSTEM=00
-> arg[15] = -DSAPSYSTEMNAME=DEV
-> arg[16] = -DSAPMYNAME=gitlsap_DEV_00
-> arg[17] = -DSAPPROFILE=F:\usr\sap\DEV\SYS\profile\DEV_DVEBMGS00_gitlsap
-> arg[18] = -DFRFC_FALLBACK=ON
-> arg[19] = -DFRFC_FALLBACK_HOST=localhost
-> lib path = PATH=C:\j2sdk1.4.2_12\jre\bin\server;C:\j2sdk1.4.2_12\jre\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program Files\Microsoft SQL Server\90\Tools\binn\;C:\Program Files\Microsoft SQL Server\90\DTS\Binn\;C:\Program Files\Microsoft SQL Server\90\Tools\Binn\VSShell\Common7\IDE\;F:\usr\sap\DEV\SYS\exe\uc\NTI386
-> exe path = PATH=C:\j2sdk1.4.2_12\bin;F:\usr\sap\DEV\DVEBMGS00\j2ee\os_libs;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program Files\Microsoft SQL Server\90\Tools\binn\;C:\Program Files\Microsoft SQL Server\90\DTS\Binn\;C:\Program Files\Microsoft SQL Server\90\Tools\Binn\VSShell\Common7\IDE\;F:\usr\sap\DEV\SYS\exe\uc\NTI386
[Thr 3096] Fri Jun 20 15:19:16 2008
[Thr 3096] JControlIBuildProcessList: Maximum error count is set to 4
[Thr 4532] JControlRequestFunc: Thread 4532 started as listener thread for np messages.
[Thr 3096] [Node: dispatcher] java home is set by profile parameter
Java Home: C:\j2sdk1.4.2_12
[Thr 3096] JStartupICheckFrameworkPackage: can't find framework package F:\usr\sap\DEV\DVEBMGS00\exe\jvmx.jar
JStartupIReadSection: read node properties [ID2750700]
-> node name : dispatcher
-> node type : dispatcher
-> node execute : yes
-> jlaunch parameters :
-> java path : C:\j2sdk1.4.2_12
-> java parameters : -Djava.security.policy=./java.policy -Djava.security.egd=file:/dev/urandom -Dorg.omg.CORBA.ORBClass=com.sap.engine.system.ORBProxy -Dorg.omg.CORBA.ORBSingletonClass=com.sap.engine.system.ORBSingletonProxy -Djavax.rmi.CORBA.PortableRemoteObjectClass=com.sap.engine.system.PortableRemoteObjectProxy -verbose:gc -XX:NewSize=28m -XX:MaxNewSize=28m -XX:+DisableExplicitGC
-> java vm version : 1.4.2_12-b03
-> java vm vendor : Java HotSpot(TM) Server VM (Sun Microsystems Inc.)
-> java vm type : server
-> java vm cpu : x86
-> heap size : 170M
-> init heap size : 170M
-> root path : F:\usr\sap\DEV\DVEBMGS00\j2ee\cluster\dispatcher
-> class path : .\bin\boot\boot.jar;.\bin\system\bytecode.jar;.
-> OS libs path : F:\usr\sap\DEV\DVEBMGS00\j2ee\os_libs
-> main class : com.sap.engine.boot.Start
-> framework class : com.sap.bc.proj.jstartup.JStartupFramework
-> registr. class : com.sap.bc.proj.jstartup.JStartupNatives
-> framework path : F:\usr\sap\DEV\DVEBMGS00\exe\jstartup.jar;F:\usr\sap\DEV\DVEBMGS00\exe\jvmx.jar
-> parameters :
-> debuggable : no
-> debug mode : no
-> debug port : 60000
-> shutdown timeout : 120000
[Thr 3096] [Node: server0] java home is set by profile parameter
Java Home: C:\j2sdk1.4.2_12
[Thr 3096] JStartupICheckFrameworkPackage: can't find framework package F:\usr\sap\DEV\DVEBMGS00\exe\jvmx.jar
JStartupIReadSection: read node properties [ID2750750]
-> node name : server0
-> node type : server
-> node execute : yes
-> jlaunch parameters :
-> java path : C:\j2sdk1.4.2_12
-> java parameters : -Djava.security.policy=./java.policy -Djava.security.egd=file:/dev/urandom -Dorg.omg.CORBA.ORBClass=com.sap.engine.system.ORBProxy -Dorg.omg.CORBA.ORBSingletonClass=com.sap.engine.system.ORBSingletonProxy -Djavax.rmi.CORBA.PortableRemoteObjectClass=com.sap.engine.system.PortableRemoteObjectProxy -Djco.jarm=1 -verbose:gc -Djava.awt.headless=true -Dsun.io.useCanonCaches=false -Dorg.omg.PortableInterceptor.ORBInitializerClass.com.sap.engine.services.ts.jts.ots.PortableInterceptor.JTSInitializer -Djava.io.tmpdir=E:\EP_TEMP -Dcm.tmpdir=E:\EP_TEMP -verbose:gc -XX:NewSize=170m -XX:MaxNewSize=170m -XX:MaxPermSize=192m -XX:PermSize=192m -XX:DisableExplicitGC -XX:UseParNewGC -XX:PrintGCDetails -XX:PrintGCTimeStamps -XX:SurvivorRatio=2 -XX:TargetSurvivorRatio=90 -XX:SoftRefLRUPolicyMSPerMB=1 -verbose:gc
-> java vm version : 1.4.2_12-b03
-> java vm vendor : Java HotSpot(TM) Server VM (Sun Microsystems Inc.)
-> java vm type : server
-> java vm cpu : x86
-> heap size : 1024M
-> init heap size : 1024M
-> root path : F:\usr\sap\DEV\DVEBMGS00\j2ee\cluster\server0
-> class path : .\bin\boot\boot.jar;.\bin\boot\jaas.jar;.\bin\system\bytecode.jar;.
-> OS libs path : F:\usr\sap\DEV\DVEBMGS00\j2ee\os_libs
-> main class : com.sap.engine.boot.Start
-> framework class : com.sap.bc.proj.jstartup.JStartupFramework
-> registr. class : com.sap.bc.proj.jstartup.JStartupNatives
-> framework path : F:\usr\sap\DEV\DVEBMGS00\exe\jstartup.jar;F:\usr\sap\DEV\DVEBMGS00\exe\jvmx.jar
-> parameters :
-> debuggable : no
-> debug mode : no
-> debug port : 50021
-> shutdown timeout : 120000
[Thr 3096] INFO: Invalid property value [Debbugable=yes]
[Thr 3096] [Node: SDM] java home is set by profile parameter
Java Home: C:\j2sdk1.4.2_12
[Thr 3096] JStartupICheckFrameworkPackage: can't find framework package F:\usr\sap\DEV\DVEBMGS00\exe\jvmx.jar
JStartupIReadSection: read node properties [sdm]
-> node name : SDM
-> node type : sdm
-> node execute : yes
-> java path : C:\j2sdk1.4.2_12
-> java parameters :
-> java vm version : 1.4.2_12-b03
-> java vm vendor : Java HotSpot(TM) Server VM (Sun Microsystems Inc.)
-> java vm type : server
-> java vm cpu : x86
-> heap size : 128M
-> root path : F:\usr\sap\DEV\DVEBMGS00\SDM\program
-> class path : F:\usr\sap\DEV\DVEBMGS00\SDM\program\bin\SDM.jar
-> OS libs path : F:\usr\sap\DEV\DVEBMGS00\j2ee\os_libs
-> main class : SDMInternal
-> framework class : com.sap.bc.proj.jstartup.JStartupFramework
-> registr. class : com.sap.bc.proj.jstartup.JStartupNatives
-> framework path : F:\usr\sap\DEV\DVEBMGS00\exe\jstartup.jar;F:\usr\sap\DEV\DVEBMGS00\exe\jvmx.jar
-> shutdown class : com.sap.sdm.jstartup.shutdown.InternalShutDown
-> parameters : server sdmhome=F:\usr\sap\DEV\DVEBMGS00\SDM\program
-> debuggable : yes
-> debug mode : no
-> debug port : 60000
-> shutdown timeout : 120000
[Thr 3096] JControlMSConnect: attached to message server (gitlsap/3901)
JControlStartJLaunch: program = F:\usr\sap\DEV\DVEBMGS00\exe\jlaunch.exe
-> arg[00] = F:\usr\sap\DEV\DVEBMGS00\exe\jlaunch.exe
-> arg[01] = pf=F:\usr\sap\DEV\SYS\profile\DEV_DVEBMGS00_gitlsap
-> arg[02] = -DSAPINFO=DEV_00_dispatcher
-> arg[03] = -nodeId=0
-> arg[04] = -file=F:\usr\sap\DEV\DVEBMGS00\j2ee\cluster\instance.properties
-> arg[05] = -syncSem=JSTARTUP_WAIT_ON_3012
-> arg[06] = -nodeName=ID2750700
-> arg[07] = -jvmOutFile=F:\usr\sap\DEV\DVEBMGS00\work\jvm_dispatcher.out
-> arg[08] = [Thr 4540] JControlMSMessageFunc: Thread 4540 started as listener thread for ms messages.
-stdOutFile=F:\usr\sap\DEV\DVEBMGS00\work\std_dispatcher.out
-> arg[09] = -locOutFile=F:\usr\sap\DEV\DVEBMGS00\work\dev_dispatcher
-> arg[10] = -mode=JCONTROL
-> arg[11] = pf=F:\usr\sap\DEV\SYS\profile\DEV_DVEBMGS00_gitlsap
-> arg[12] = -DSAPSTART=1
-> arg[13] = -DCONNECT_PORT=1055
-> arg[14] = -DSAPSYSTEM=00
-> arg[15] = -DSAPSYSTEMNAME=DEV
-> arg[16] = -DSAPMYNAME=gitlsap_DEV_00
-> arg[17] = -DSAPPROFILE=F:\usr\sap\DEV\SYS\profile\DEV_DVEBMGS00_gitlsap
-> arg[18] = -DFRFC_FALLBACK=ON
-> arg[19] = -DFRFC_FALLBACK_HOST=localhost
-> lib path = PATH=C:\j2sdk1.4.2_12\jre\bin\server;C:\j2sdk1.4.2_12\jre\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program Files\Microsoft SQL Server\90\Tools\binn\;C:\Program Files\Microsoft SQL Server\90\DTS\Binn\;C:\Program Files\Microsoft SQL Server\90\Tools\Binn\VSShell\Common7\IDE\;F:\usr\sap\DEV\SYS\exe\uc\NTI386
-> exe path = PATH=C:\j2sdk1.4.2_12\bin;F:\usr\sap\DEV\DVEBMGS00\j2ee\os_libs;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program Files\Microsoft SQL Server\90\Tools\binn\;C:\Program Files\Microsoft SQL Server\90\DTS\Binn\;C:\Program Files\Microsoft SQL Server\90\Tools\Binn\VSShell\Common7\IDE\;F:\usr\sap\DEV\SYS\exe\uc\NTI386
[Thr 3096] JControlICheckProcessList: process dispatcher started (PID:4544)
JControlStartJLaunch: program = F:\usr\sap\DEV\DVEBMGS00\exe\jlaunch.exe
-> arg[00] = F:\usr\sap\DEV\DVEBMGS00\exe\jlaunch.exe
-> arg[01] = pf=F:\usr\sap\DEV\SYS\profile\DEV_DVEBMGS00_gitlsap
-> arg[02] = -DSAPINFO=DEV_00_server
-> arg[03] = -nodeId=1
-> arg[04] = -file=F:\usr\sap\DEV\DVEBMGS00\j2ee\cluster\instance.properties
-> arg[05] = -syncSem=JSTARTUP_WAIT_ON_3012
-> arg[06] = -nodeName=ID2750750
-> arg[07] = -jvmOutFile=F:\usr\sap\DEV\DVEBMGS00\work\jvm_server0.out
-> arg[08] = -stdOutFile=F:\usr\sap\DEV\DVEBMGS00\work\std_server0.out
-> arg[09] = -locOutFile=F:\usr\sap\DEV\DVEBMGS00\work\dev_server0
-> arg[10] = -mode=JCONTROL
-> arg[11] = pf=F:\usr\sap\DEV\SYS\profile\DEV_DVEBMGS00_gitlsap
-> arg[12] = -DSAPSTART=1
-> arg[13] = -DCONNECT_PORT=1055
-> arg[14] = -DSAPSYSTEM=00
-> arg[15] = -DSAPSYSTEMNAME=DEV
-> arg[16] = -DSAPMYNAME=gitlsap_DEV_00
-> arg[17] = -DSAPPROFILE=F:\usr\sap\DEV\SYS\profile\DEV_DVEBMGS00_gitlsap
-> arg[18] = -DFRFC_FALLBACK=ON
-> arg[19] = -DFRFC_FALLBACK_HOST=localhost
-> lib path = PATH=C:\j2sdk1.4.2_12\jre\bin\server;C:\j2sdk1.4.2_12\jre\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program Files\Microsoft SQL Server\90\Tools\binn\;C:\Program Files\Microsoft SQL Server\90\DTS\Binn\;C:\Program Files\Microsoft SQL Server\90\Tools\Binn\VSShell\Common7\IDE\;F:\usr\sap\DEV\SYS\exe\uc\NTI386
-> exe path = PATH=C:\j2sdk1.4.2_12\bin;F:\usr\sap\DEV\DVEBMGS00\j2ee\os_libs;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program Files\Microsoft SQL Server\90\Tools\binn\;C:\Program Files\Microsoft SQL Server\90\DTS\Binn\;C:\Program Files\Microsoft SQL Server\90\Tools\Binn\VSShell\Common7\IDE\;F:\usr\sap\DEV\SYS\exe\uc\NTI386
[Thr 3096] JControlICheckProcessList: process server0 started (PID:4552)
JControlStartJLaunch: program = F:\usr\sap\DEV\DVEBMGS00\exe\jlaunch.exe
-> arg[00] = F:\usr\sap\DEV\DVEBMGS00\exe\jlaunch.exe
-> arg[01] = pf=F:\usr\sap\DEV\SYS\profile\DEV_DVEBMGS00_gitlsap
-> arg[02] = -DSAPINFO=DEV_00_sdm
-> arg[03] = -nodeId=2
-> arg[04] = -file=F:\usr\sap\DEV\DVEBMGS00\SDM\program\config\sdm_jstartup.properties
-> arg[05] = -syncSem=JSTARTUP_WAIT_ON_3012
-> arg[06] = -nodeName=sdm
-> arg[07] = -jvmOutFile=F:\usr\sap\DEV\DVEBMGS00\work\jvm_sdm.out
-> arg[08] = -stdOutFile=F:\usr\sap\DEV\DVEBMGS00\work\std_sdm.out
-> arg[09] = -locOutFile=F:\usr\sap\DEV\DVEBMGS00\work\dev_sdm
-> arg[10] = -mode=JCONTROL
-> arg[11] = pf=F:\usr\sap\DEV\SYS\profile\DEV_DVEBMGS00_gitlsap
-> arg[12] = -DSAPSTART=1
-> arg[13] = -DCONNECT_PORT=1055
-> arg[14] = -DSAPSYSTEM=00
-> arg[15] = -DSAPSYSTEMNAME=DEV
-> arg[16] = -DSAPMYNAME=gitlsap_DEV_00
-> arg[17] = -DSAPPROFILE=F:\usr\sap\DEV\SYS\profile\DEV_DVEBMGS00_gitlsap
-> arg[18] = -DFRFC_FALLBACK=ON
-> arg[19] = -DFRFC_FALLBACK_HOST=localhost
-> lib path = PATH=C:\j2sdk1.4.2_12\jre\bin\server;C:\j2sdk1.4.2_12\jre\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program Files\Microsoft SQL Server\90\Tools\binn\;C:\Program Files\Microsoft SQL Server\90\DTS\Binn\;C:\Program Files\Microsoft SQL Server\90\Tools\Binn\VSShell\Common7\IDE\;F:\usr\sap\DEV\SYS\exe\uc\NTI386
-> exe path = PATH=C:\j2sdk1.4.2_12\bin;F:\usr\sap\DEV\DVEBMGS00\j2ee\os_libs;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program Files\Microsoft SQL Server\90\Tools\binn\;C:\Program Files\Microsoft SQL Server\90\DTS\Binn\;C:\Program Files\Microsoft SQL Server\90\Tools\Binn\VSShell\Common7\IDE\;F:\usr\sap\DEV\SYS\exe\uc\NTI386
[Thr 3096] JControlICheckProcessList: process SDM started (PID:4560)
[Thr 3096] JControlMSSendLogon: delete SDM logon information (rc=0)
[Thr 3096] Fri Jun 20 15:19:26 2008
[Thr 3096] JControlMSSendLogon: insert SDM logon information (port=50018; rc=0)
[Thr 3096] Fri Jun 20 15:20:11 2008
[Thr 3096] JControlICheckProcessList: process server0 (pid:4552) died (RUN-FLAG)
[Thr 3096] JControlIResetProcess: reset process server0
[Thr 3096] JControlIResetProcess: [server0] not running -> increase error count (1)
[Thr 3096] JControlICheckProcessList: running flight recorder:
C:\j2sdk1.4.2_12\bin\java -classpath ../j2ee/cluster/bootstrap/sap.comtcbloffline_launcherimpl.jar com.sap.engine.offline.OfflineToolStart com.sap.engine.flightrecorder.core.Collector ../j2ee/cluster/bootstrap -node ID2750750 1213955356 -bz F:\usr\sap\DEV\SYS\global
JControlStartJLaunch: program = F:\usr\sap\DEV\DVEBMGS00\exe\jlaunch.exe
-> arg[00] = F:\usr\sap\DEV\DVEBMGS00\exe\jlaunch.exe
-> arg[01] = pf=F:\usr\sap\DEV\SYS\profile\DEV_DVEBMGS00_gitlsap
-> arg[02] = -DSAPINFO=DEV_00_server
-> arg[03] = -nodeId=1
-> arg[04] = -file=F:\usr\sap\DEV\DVEBMGS00\j2ee\cluster\instance.properties
-> arg[05] = -syncSem=JSTARTUP_WAIT_ON_3012
-> arg[06] = -nodeName=ID2750750
-> arg[07] = -jvmOutFile=F:\usr\sap\DEV\DVEBMGS00\work\jvm_server0.out
-> arg[08] = -jvmOutMode=append
-> arg[09] = -stdOutFile=F:\usr\sap\DEV\DVEBMGS00\work\std_server0.out
-> arg[10] = -stdOutMode=append
-> arg[11] = -traceMode=append
-> arg[12] = -locOutFile=F:\usr\sap\DEV\DVEBMGS00\work\dev_server0
-> arg[13] = -mode=JCONTROL
-> arg[14] = pf=F:\usr\sap\DEV\SYS\profile\DEV_DVEBMGS00_gitlsap
-> arg[15] = -DSAPSTART=1
-> arg[16] = -DCONNECT_PORT=1055
-> arg[17] = -DSAPSYSTEM=00
-> arg[18] = -DSAPSYSTEMNAME=DEV
-> arg[19] = -DSAPMYNAME=gitlsap_DEV_00
-> arg[20] = -DSAPPROFILE=F:\usr\sap\DEV\SYS\profile\DEV_DVEBMGS00_gitlsap
-> arg[21] = -DFRFC_FALLBACK=ON
-> arg[22] = -DFRFC_FALLBACK_HOST=localhost
-> lib path = PATH=C:\j2sdk1.4.2_12\jre\bin\server;C:\j2sdk1.4.2_12\jre\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program Files\Microsoft SQL Server\90\Tools\binn\;C:\Program Files\Microsoft SQL Server\90\DTS\Binn\;C:\Program Files\Microsoft SQL Server\90\Tools\Binn\VSShell\Common7\IDE\;F:\usr\sap\DEV\SYS\exe\uc\NTI386
-> exe path = PATH=C:\j2sdk1.4.2_12\bin;F:\usr\sap\DEV\DVEBMGS00\j2ee\os_libs;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program Files\Microsoft SQL Server\90\Tools\binn\;C:\Program Files\Microsoft SQL Server\90\DTS\Binn\;C:\Program Files\Microsoft SQL Server\90\Tools\Binn\VSShell\Common7\IDE\;F:\usr\sap\DEV\SYS\exe\uc\NTI386
[Thr 3096] JControlICheckProcessList: process server0 started (PID:3920)
[Thr 3096] Fri Jun 20 15:20:51 2008
[Thr 3096] JControlICheckProcessList: process server0 (pid:3920) died (RUN-FLAG)
[Thr 3096] JControlIResetProcess: reset process server0
[Thr 3096] JControlIResetProcess: [server0] not running -> increase error count (2)
[Thr 3096] JControlICheckProcessList: running flight recorder:
C:\j2sdk1.4.2_12\bin\java -classpath ../j2ee/cluster/bootstrap/sap.comtcbloffline_launcherimpl.jar com.sap.engine.offline.OfflineToolStart com.sap.engine.flightrecorder.core.Collector ../j2ee/cluster/bootstrap -node ID2750750 1213955411 -bz F:\usr\sap\DEV\SYS\global
JControlStartJLaunch: program = F:\usr\sap\DEV\DVEBMGS00\exe\jlaunch.exe
-> arg[00] = F:\usr\sap\DEV\DVEBMGS00\exe\jlaunch.exe
-> arg[01] = pf=F:\usr\sap\DEV\SYS\profile\DEV_DVEBMGS00_gitlsap
-> arg[02] = -DSAPINFO=DEV_00_server
-> arg[03] = -nodeId=1
-> arg[04] = -file=F:\usr\sap\DEV\DVEBMGS00\j2ee\cluster\instance.properties
-> arg[05] = -syncSem=JSTARTUP_WAIT_ON_3012
-> arg[06] = -nodeName=ID2750750
-> arg[07] = -jvmOutFile=F:\usr\sap\DEV\DVEBMGS00\work\jvm_server0.out
-> arg[08] = -jvmOutMode=append
-> arg[09] = -stdOutFile=F:\usr\sap\DEV\DVEBMGS00\work\std_server0.out
-> arg[10] = -stdOutMode=append
-> arg[11] = -traceMode=append
-> arg[12] = -locOutFile=F:\usr\sap\DEV\DVEBMGS00\work\dev_server0
-> arg[13] = -mode=JCONTROL
-> arg[14] = pf=F:\usr\sap\DEV\SYS\profile\DEV_DVEBMGS00_gitlsap
-> arg[15] = -DSAPSTART=1
-> arg[16] = -DCONNECT_PORT=1055
-> arg[17] = -DSAPSYSTEM=00
-> arg[18] = -DSAPSYSTEMNAME=DEV
-> arg[19] = -DSAPMYNAME=gitlsap_DEV_00
-> arg[20] = -DSAPPROFILE=F:\usr\sap\DEV\SYS\profile\DEV_DVEBMGS00_gitlsap
-> arg[21] = -DFRFC_FALLBACK=ON
-> arg[22] = -DFRFC_FALLBACK_HOST=localhost
-> lib path = PATH=C:\j2sdk1.4.2_12\jre\bin\server;C:\j2sdk1.4.2_12\jre\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program Files\Microsoft SQL Server\90\Tools\binn\;C:\Program Files\Microsoft SQL Server\90\DTS\Binn\;C:\Program Files\Microsoft SQL Server\90\Tools\Binn\VSShell\Common7\IDE\;F:\usr\sap\DEV\SYS\exe\uc\NTI386
-> exe path = PATH=C:\j2sdk1.4.2_12\bin;F:\usr\sap\DEV\DVEBMGS00\j2ee\os_libs;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program Files\Microsoft SQL Server\90\Tools\binn\;C:\Program Files\Microsoft SQL Server\90\DTS\Binn\;C:\Program Files\Microsoft SQL Server\90\Tools\Binn\VSShell\Common7\IDE\;F:\usr\sap\DEV\SYS\exe\uc\NTI386
[Thr 3096] JControlICheckProcessList: process server0 started (PID:4972)
[Thr 3096] Fri Jun 20 15:21:46 2008
[Thr 3096] JControlICheckProcessList: process server0 (pid:4972) died (RUN-FLAG)
[Thr 3096] JControlIResetProcess: reset process server0
[Thr 3096] JControlIResetProcess: [server0] not running -> increase error count (3)
[Thr 3096] JControlICheckProcessList: running flight recorder:
C:\j2sdk1.4.2_12\bin\java -classpath ../j2ee/cluster/bootstrap/sap.comtcbloffline_launcherimpl.jar com.sap.engine.offline.OfflineToolStart com.sap.engine.flightrecorder.core.Collector ../j2ee/cluster/bootstrap -node ID2750750 1213955451 -bz F:\usr\sap\DEV\SYS\global
JControlStartJLaunch: program = F:\usr\sap\DEV\DVEBMGS00\exe\jlaunch.exe
-> arg[00] = F:\usr\sap\DEV\DVEBMGS00\exe\jlaunch.exe
-> arg[01] = pf=F:\usr\sap\DEV\SYS\profile\DEV_DVEBMGS00_gitlsap
-> arg[02] = -DSAPINFO=DEV_00_server
-> arg[03] = -nodeId=1
-> arg[04] = -file=F:\usr\sap\DEV\DVEBMGS00\j2ee\cluster\instance.properties
-> arg[05] = -syncSem=JSTARTUP_WAIT_ON_3012
-> arg[06] = -nodeName=ID2750750
-> arg[07] = -jvmOutFile=F:\usr\sap\DEV\DVEBMGS00\work\jvm_server0.out
-> arg[08] = -jvmOutMode=append
-> arg[09] = -stdOutFile=F:\usr\sap\DEV\DVEBMGS00\work\std_server0.out
-> arg[10] = -stdOutMode=append
-> arg[11] = -traceMode=append
-> arg[12] = -locOutFile=F:\usr\sap\DEV\DVEBMGS00\work\dev_server0
-> arg[13] = -mode=JCONTROL
-> arg[14] = pf=F:\usr\sap\DEV\SYS\profile\DEV_DVEBMGS00_gitlsap
-> arg[15] = -DSAPSTART=1
-> arg[16] = -DCONNECT_PORT=1055
-> arg[17] = -DSAPSYSTEM=00
-> arg[18] = -DSAPSYSTEMNAME=DEV
-> arg[19] = -DSAPMYNAME=gitlsap_DEV_00
-> arg[20] = -DSAPPROFILE=F:\usr\sap\DEV\SYS\profile\DEV_DVEBMGS00_gitlsap
-> arg[21] = -DFRFC_FALLBACK=ON
-> arg[22] = -DFRFC_FALLBACK_HOST=localhost
-> lib path = PATH=C:\j2sdk1.4.2_12\jre\bin\server;C:\j2sdk1.4.2_12\jre\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program Files\Microsoft SQL Server\90\Tools\binn\;C:\Program Files\Microsoft SQL Server\90\DTS\Binn\;C:\Program Files\Microsoft SQL Server\90\Tools\Binn\VSShell\Common7\IDE\;F:\usr\sap\DEV\SYS\exe\uc\NTI386
-> exe path = PATH=C:\j2sdk1.4.2_12\bin;F:\usr\sap\DEV\DVEBMGS00\j2ee\os_libs;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program Files\Microsoft SQL Server\90\Tools\binn\;C:\Program Files\Microsoft SQL Server\90\DTS\Binn\;C:\Program Files\Microsoft SQL Server\90\Tools\Binn\VSShell\Common7\IDE\;F:\usr\sap\DEV\SYS\exe\uc\NTI386
[Thr 3096] JControlICheckProcessList: process server0 started (PID:4456)
[Thr 3096] Fri Jun 20 15:22:26 2008
[Thr 3096] JControlICheckProcessList: process server0 (pid:4456) died (RUN-FLAG)
[Thr 3096] JControlIResetProcess: reset process server0
[Thr 3096] JControlIResetProcess: [server0] not running -> increase error count (4)
[Thr 3096] JControlICheckProcessList: running flight recorder:
C:\j2sdk1.4.2_12\bin\java -classpath ../j2ee/cluster/bootstrap/sap.comtcbloffline_launcherimpl.jar com.sap.engine.offline.OfflineToolStart com.sap.engine.flightrecorder.core.Collector ../j2ee/cluster/bootstrap -node ID2750750 1213955506 -bz F:\usr\sap\DEV\SYS\global -
Ultra not booting, reboots on its own, display - possible solution for all.
I had a problem for a few days where my Ultra 24 would stop (the screen would freeze for a sec), the fan would make a lot of noise and the PC would reboot on its owns. Sometimes it would be on a loop or not start up at all.
I perused through these boards and saw other people with similar issues and solutions. (Mine was to take out MB battery and reset bios).
This fixed the problem but it eventually came back at least once a week.
Anyways after calling Sun and spending a lot of time on the phone I determined that this is related to the graphic card. You'll notice that the nvidia driver these workstations come with are really outdated drivers (mine was the quadro nvs 290).
After I updated the driver (05/08) the problem has gone away and graphics perform MUCH better.
I am running running Solaris 10 and XP.
Hope this helps some of you out.
Edited by: Rhuobhe on Jun 24, 2008 1:24 AM
Edited by: Rhuobhe on Jun 24, 2008 1:24 AMWe have a T-Mobile corporate account with several of these 8120's. We have had them since mid-July and now 3 out of 10 of them are having the reboot issue as well. We, however, do not have or use any memory cards in them, so I don't think that is the problem either. We've reinstalled the software (they had the same version as the newest already installed) as tech support has suggested, and still the problem happens. It happens sometimes when the phone is idle, but most of the time they reboot during a conversation. This is quite annoying as they are business phones and it takes 3-5 minutes for the phone to complete the reboot process. Any help on this would be greatly appreciated.
Message Edited by ridbidge on 09-18-2008 03:34 PM -
Mac OS 10.5 /
I deleted the " Private" folder ... and emptied the trash. So the folder and its contents no longer exists on my computer at all !!!
I do have the OS 10.5 dvd that i purchased years ago...
But my computer will not start from it on its own.
My question is what is the open source or terminal language code used to tell my mac to look in the DVD rom drive for startup info? I know that im not the only person in this world who has deleted the "PRIVATE" folder and emptied the trash so it no longer exists on their machine...
That said theres gotta be a common fix for a Power PC G4 that has the OS X dvd in the rom drive but wont look to it to reinstall the vital contents of the PRIVATE folder.
Once again there is not a copy of this file or its contents in the recycle bin...
Also rebooting the machine , pressing and holding the letter C does not prompt the machine to look to the dvd rom drive.
I was reinstalling pro tools and figured I would make some room by cleaning my computers HD...
Lol It was a bad choice to delete this file ...
Thanks guysOkay sorry it took forever to respond... But for a while there I gave up on this computer!!!!
Money's been tight lately , so taking it in to a professional was not yet an option... though I did consider it eventhough.
Anyway long story short im glad I didnt spend any money because I already had all the tools necessary to fix this issue but was going about it in the wrong way. Okay so here is my scenario and the breakdown... Though this may not fix the issue for everyone :( which *****... But I know we all will have different circumstances.
Anyway here we go...
Okay so first things first.... Years ago I purchased the OS 10.5.1 disk ... So that has always been in my possession!!!!
I realize that some may not have a disk to reflash your OS to your hard drive... but if you do your in luck.
2ndly ... I had an external harddrive with all of my itunes downloaded music so it was more than okay with me to delete my primary HD because all the important stuff could either be copied over or repathed to be located.
-------If you dont want to read through the whole story the fix is summed up in the bottom section-------
Okay so now the SOLUTION!!!!
By trial and error , and pure boredom I opened up my computer to clean the inside...
AND
"Disconnected the primary HD"
and just because ....... REBOOTED my computer. Just to see what it would do.
Upon restart and though it looked like it would repeat its usual cycle...
About 1 minute in to that process my computer froze for about 2 seconds and flashed to the OS installation screen.
Mind you I havent seen this screen yet... Probably hasnt been since I installed the OS years ago.
After a bit of trial and error...
I decided to tell my computer to startup from the OS 10.5 disk located in my dvd rom drive and restarted once again...
this setting is under
Utilities / startup disk
After a little more trial and error ... I realized that I could reconnect the primary HD , restart the machine and return to the OS installation menu.
So upon this discovery
I went to the Disk Utility located under Utilities
Highlighted my primary HD located in the left hand column
Once highlighted ...
In the heading section on the right I selected the option
Erase
in which I erased My current OS on my primary HD ...
I used the first option in the list under security... Because it seemed like the least invasive and would take the least amount of time to see if this process would actually work.
I FORGOT to add something...
Another reason why I deleted my primary HD!!!!!
I forgot to say that it WOULD NOT!!!!! Show up in the STARTUP list as an option...Even After multiple reboots....
But like clockwork... Once I deleted its name IT SHOWED UP as an option!!!!
So back to the next step...
I returned to the STARTUP option under utilities ... And was then able to see MY primary HD now as a startup option...
But ofcourse it had no name because it we previously erased it.
So when Clicking my newly erased HD ... I was almost immediately prompted to REINSTALL the OS ...
Which said it would take about 57 minutes ... But I believe was alot less...
My issue was resolved ... My computer then stated the install was SUCCESSFUL!!!!!!! :))))))))))) lol ;)
It was like I was setting up for the first time ;) asking for my registration info...
The dilemma of deleting the private folder and emptying the trash is finally over resolved. Done ... and no extra money spent!!!!!!!!!
Its really crazy that the information for such a simple thing is not readily available. Especially being such a simple fix.
I know im not the only person who's had this issue , because i've seen numerous posts with similar wording.
I also know I wont be the last person to have this issue... So I hope this synopsis makes sense.
-------One more time the fix------
*Insert your OS dvd into your dvd rom drive.
*Unplug your primary HD or corrupted startup disk
*Reboot your machine...
Upon restart your primary HD will not be recognized...
* you will then be prompted to select your language.
Once selected
*Click Utilities/startup... Highlight the the selection that refers to the OS dvd located in the dvd rom drive.
* Click restart...
!!!!!!!!!!Be sure to reconnect your Primary HD Before your computer restarts and you hear the chime!!!!!!!!
If you do not replug your HD before the chime it will not be recognized.
In that case restart again.
Upon restart once again
*Choose your language...
*Click Utilities / disk utility
In the left column select and
*Highlight your HD ...
Then towards the top portion / center of the page
*Click the heading Erase
Then on the page toward the bottom
*Click security options
This will then provide erase options.
I USED THE FIRST OPTION
"Dont erase data"...
*click OK
* click erase...
Once erased which should take a few seconds
*Cancel the disk utility...
* Click Utilities / startup
And your newly erased HD should now appear in the list.
* Select your drive from the list by highlighting
It should no longer have a name.
*Once selected, you will then be prompted to restart and install the OS to your newly erased HD...
Thats it!!!!
Once everything reinstalls re-add your personal info or registration info and you are up and running.
Goodluck ;) -
Phone not working after update volume. Battery life resets on own
Ever since last ISO update phone not working right. Looses volume. Shuts off Battery life went out to lunch. Texting slow. Any fix yet I see lots of issues. And tec support wants to charge as phone is off warranty. Was working finè before update.
Very sad customerHello 2canoes and welcome to the BlackBerry Support Community Forums.
Sorry to hear you're experiencing issues with your device after updating your software.
It's recommended you contact your mobile service provider for investigation on this matter and to open a support ticket with BlackBerry technical support.
Thanks!
-HMthePirate
Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)! -
please help - installed IOS7 and now I am having problems playing Words Free on my Iphone. It gives me a pop up telling me to connect to ITunes but will not connect. Cannot get out and have to continually shut down my phone and start over.
Hi, jeantwin.
Thank you for visiting Apple Support Communities.
The steps in the article below may help you resolve the issue with push notifications.
iPad and iPod touch: Unable to use YouTube or Push notifications
http://support.apple.com/kb/ts3305
If the issue persists, try signing out of your Apple ID and then sign back in.
iOS: Changing the signed-in iTunes Store Apple ID account
http://support.apple.com/kb/HT1311
Cheers,
Jason H. -
This phone can not be used because the apple mobile device service is not started
i plug my iphone into my computer and the message this phone can not be used because the apple mobile device service is not started pops up and wont let me download any music onto my phone. what can i do to make that stop happening?
See Here
http://support.apple.com/kb/TS1567 -
i keep getting a message when i try to synch my iphone "This iphone cannot be used because the Apple Mobile Device service is not started" I have synched this phone with this computer many times before with no problems. Can anyone please shed any light on how to fix this? thx
See Here
http://support.apple.com/kb/TS1567 -
Just downloaded iTunes to new dell laptop, tried syncing my iPhone get an error message: "this iPhone cannot be used because the Apple Mobile Device service is not started". What is the issue, had this phone over a year??
I had this problem before. I like to disable extra services to speed up my computer and I disabled the Apple Mobile Device service and had to re-enable this.
You can do that by going Control Panel>Administrative Tools>Services. Once you have gone to the services window, look for Apple Mobile Device and right-click. Select "Properties". There should be some information about the service as well as the label "Startup Type" with a drop-down menu beside it. If it says "disabled", that is your problem; Change the selection to anything except disabled (Automatic is easier and ensures that you can sync as soon as itunes opens).
If this doesn't work, I would look into your anti-virus' settings. Good Luck! -
My iPhone 4s is not switching on, I connected it to itunes thru my Windows 7 laptop and it says phone needs to be restored. I clicked okay and it started the process however the progress bar with the apple logo is on the screen, progress in the bar did not start yet after 5 hours. Some one please hep me.
I did put it in DFU mode but its still not working, although everytime it shows your iphone needs to be restored. Kindly help.
-
Erased all content on 3G but now won't sync with iTunes. Error states, "This iPhone cannot be used because the Apple Mobile Device service is not started." I don't want phone service on this old 3G. Just want to use it as an iTouch. Any suggestions?
Type "Apple Mobile Device service " into the search bar at the top of this page by "Support"
-
Itunes does not start automatically when I plug in my iPhone. When I start it manually, it never recognizes the phone although it does ask if I want to download pictures etc. Many albums have no art work that use to. iTunes completely unresponsive to the mouse.
Hi billm1013,
I'm sorry to hear you are having these issues with your iPhone. If your iPhone isn't being recognized in iTunes, and/or iTunes isn't responding to your mouse when the iPhone is connected, you may find the troubleshooting steps outlined in the following article helpful:
If you don't see your connected device in iTunes for Mac - Apple Support
Regards,
- Brenden
Maybe you are looking for
-
Mail synch between iPhone iPad Mini using IMAP
This is a complex questions, so please bear with me. Setup I use Mac Mini desktop, iPhone and iPad. All less than 18 months old. Mail is setup for IMAP My mail is picked up from my ISP's server. I use SpamSieve for spam, which puts spam in the spam f
-
My lumia 620 is not updating to cyan update
Please help me. My phone is not updating. My Mobile shows the message that your mobile is upto date while it is still in Lumia black. The Lumia cyan update is officially available in my country(Pakistan). What is the problem with my mobile please not
-
Dear all, i had made inventory report for opening ,closing stock and issue stock. i'm getting the perfect data for all the days, but for a single day in a year the closeing stock and next days opening stock not matching . Thanks and Regars, KaushiK S
-
I want to put iTunes on a computer that is not internet accessible. I would download at my moms house... and put on an external hard drive, to take to my house. PROBLEM is... I am afraid to download it to her computer, for fear of turning all of her
-
PROBLEMS IN MAKE TO ORDER PRODUCTION CYCLE
Dear Sir When i m making make to order cycle for a material i hv maintained stratergy 20 for the material.then i created sales order for that material.then i run MRP using MD50.Then iwent to MD04.Then i converted planned order into production order i