Phone was working three minutes ago, not it is completely black. When I put the charger on it, it does nothing. I can't see anything. Ive tried to hit the on off button, nothing, holding down the button on the bottom does nothing. Help please
phone was working three minutes ago, not it is completely black. When I put the charger on it, it does nothing. I can't see anything. Ive tried to hit the on off button, nothing, holding down the button on the bottom does nothing. Help please
First you can try to force reboot your phone. To do this:
1. Hold down the sleep/wake button and home button simultaneously.
2. Let go when the Apple logo appears and the iPhone is booting up.
If that doesn't work, you might need to hook the phone up to your computer and do a full restore through iTunes.
Similar Messages
-
My iphone randomly turned off out of nowhere. I was getting dressed, my phone was working one minute then literally the next it syopped now it wont charge i cant turn it on however the phone is on cause i called it and it rang. What to do? help please. I tried putting it in DFU mode but my lock button doesnt work and my phone wont charge so i cant connect to itunes
There is no reason to put it in DFU mode, a reset should work. Although, without a working power button it is not possible to reset the device.
Sounds like it is time to replace the damaged device. -
So my iphone4 wouldn't turn on and wouldn't show the charge bar well now it's on but cannot see anything on screen it's dark what's wrong?
Press and hold the home and power button together for about ten seconds, wait, then press the power button for about 2 seconds, or until it turns on.
-
So i woke up, was texting on my phone that works perfectly or so i thought.. Come back from getting something to eat and the phone won't turn on.. I've used 2 different charges to try to charge it, plugging it into my computer and 2 different wall chargers. When i Plug the phone into the computer it recognizes a phone was plugged in.. if anyone can help please !!!!!
Try a Reset of the Phone... You will Not Lose Any Data...
Turn the Phone Off... ( if it isn’t already )
Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
The Apple logo will Appear and then Disappear...
Usually takes about 15 - 20 Seconds...
Release the Buttons...
Turn the Phone On...
If that does not help... See Here:
Backing up, Updating and Restoring
http://support.apple.com/kb/HT1414 -
My ipod touch 5g was working 5 minutes ago now I can't turn it on!
I have no idea if its the actual ipod itself or just the screen but when I press the button at the top, literally nothing happens and it was working about 5 minutes ago!
My home button has been broken for a while so I cannot do a reset otherwise I would, its at least 2 years old this ipod, but it's done me well until now.
I am a university student and I don't live anywhere near an apple store so I have no idea what to do.
Can anyone give me any advice? I have tried putting it on charge and literally nothing is happening :/
Thanks for reading!Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
Help!! it was working a minute ago now its a blank screen
i have an iphone 3GS and everything was just working great. Went to go get some info from it and it won't respond. Its just a blank screen. The battery is fully charged and I have it now plugged into the computer... and still nothing... help
First, remove the case to check for it covering the proximity sensor that turns off the display when you hold it to your ear.
If that doesn't fix it hold HOME and SLEEP until the Apple logo appears. Disconnect from the computer first. -
hello sir/madam
this is a very urgent and important question. i nedd your assinstance.
i have iphone 3g. i was working well. about 2 months earlier i bought an app of $2.99. after then every thing was okay. but last week i installed some free games and 2 days later itunes send me a reciept via email and you guyz charged me $34. now whenever i try to install free apps they want my billing info. please i need your help and want those money back.
$34 for free games , i will show u the reciept. if its not possible to get the money back i will forced to take proper action.
thank you sir /madam.The games might be free but I think you've clicked In-App purchase which cost money. You are warned before you accept the In-App purchase. You not that young and you can read so take action if you must. It's your own fault and all purchases are final. Good luck.
-
hey...my iphone 3G(4.2.1) is dead. It aint starting. When i plug a charger to it an apple's logo gets appeared for 2-3 seconds and then its getting buzzed off! neither PC nor Itunes is detecting the iphone. i guess there was battery around 20-30%(last i saw)...please please help me out!!!!!!
Those can be the features of faulty battery. See if you can get Recovery Mode, don't Restore just enter Recovery Mode. Connect iPhone to computer or Charger. Hold both home and power buttons for about 20 seconds, see if it enters Recovery Mode. When you unplug Recovery Mode will go away. If it enters Recovery Mode fine, then most likely faulty battery. If you like you can always enter Recovery Mode and try to Restore.
-
My phone is dead it will not turn back on after taking a step I have used in the past when I have had issues with the phone. In the past I haeld the top button and the button on the face down and it will turn black then the apple sign comes up then off. I can then turn it back on and it seems to be reset and all is good not so today. It will not turn back on.
1. Plug phone into AC adaptor and charge for at least 30 minutes
2. If not on, reset phone: press both home and power buttons for at least 10 seconds, releasing when the Apple logo appears.
If no reponse to above, there is hardware damage and you need to take it to Apple or whoever provides iPhone service in your country. -
After upgrading my camera won't work??
wow sounds bad..
as for the camera button on the unlock screen, did you try doubletapping the home button?? -
Hi, I'm trying to shut down the phone in the normal way (the Sleep / Wake button and hold down on the Close tab) turns off the display after a while yet, but the phone turns off completely opens up the phone to come out after the apple logo .. What is the reason I'd appreciate if you help how to fix it ...pleasa help me
Doing those doesn't turn off your phone?
As stated hold down the top button only until you see the red slider to power off your phone.
If that doesn't work then take it to Apple and see what they say. -
IPad 4 switches off when i am using it, even when battery is fully charged. Restore function (holding down both buttons) often does not work. Cannot power up iPad. I have updated software, restarted computer, but no success. I did restore the iPad about 8 times during the past 2 weeks. Just completed another restore. iTunes says the the iPad has been restored and will restart automatically and appear in iTunes when it is ready. That was 30 minutes ago. iPad still won't start. I am looking down the barrel of yet another fruitless restore. What a crap product.
Try a reset:
Hold the Sleep and Home button down until you see the Apple logo. -
I recently go my screen replaced and it has worked since then. But now all a sudden the screen does not light up. I know my phone is on because Siri is still responsive if I hold the home button, I just can't see anything. Any suggestions?
Most likely the LCD Display connector simply came loose from its logic board connector. Take iPhone back to where it was repaired, and ask them to simply press the connector back into its place. Ask them to apply a bit of foam material or several small pieces of tape on top so the pressure of the flex connector plate holds it properly in place for the future.
-
I've followed all the instructions in order to restore my ipod touch yet it won't even turn off or show the red slipper to shut down. I've tried holding down both buttons each at a time it doesn't do anything. Anybody ever experience this? If so help? Should I just go to the apple store?
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
iPhone 4 is stuck in the telephone screen, will not turn off by holding down top button or main menu, can't send texts, emails, check internet etc.,
Hold down the home and power buttons until the Apple logo appears(about 15 seconds). It should then restart.
Maybe you are looking for
-
FRM-41211: Integration Error: SSL failure running another product Error
Hai, I am developing POS Application in Oracle(Forms6i/Reports6i). I design the Invoice Print Format in Reports6i and call from the Invoice Form. When the user save the Invoice I Commit the Invoice and call the Invoice Report for Printing Immediately
-
Substitution - Problems reported (repairable) - Message
I can substitution rule without any error message. But when I revisit the substitution area, I can see the message "Problems reported (repairable)" under 'rule activation' tab. The message changes to 'Successful' when I click 'Retry'
-
Things to consider when removing from AD domain a SQL Server 2008 which includes Reporting Services
Do any one have a link to a list of things to consider when removing from AD domain a SQL Server 2008 which includes Reporting Services, Analysis Services and Integration Services? I am taking from an Active Directory domain several servers with SQL
-
What is the best way of recording bass
Hi Peeps What is the best way to record a bass guitar in Logic. I'm going through a Fast Track Pro Audio Interface. The songs we are recording a disco cover, like get down on it and freak out, so need quite a warm rounded tone to them with a solid le
-
Load process ended with error DBIF_SETG_SQL_ERROR
HI, WE ARE USING PROCEES CHAINS TO LOAD THE DATA FROM R/3 TO BW, BUT THE LAOD PROCESS ENDED WITH FOLLOWING ERROR "ABAP/4 processor:DBIF_SETG_SQL_ERROR".