Phone won't start after installing iOS 6

Alright, first post here so bear with me.
So I installed iOS 6 I think maybe last Sunday and everything was fine from there. Safari, messaging, photos, apps were all working well. After the install I had lost all my apps but it didn't bother me as I don't have many so I installed them all again.
Today I forgot to install a flashlight app so I decided to do so then my phone went black. I thought hmm thats odd, and tried turning it on but it wouldn't. I thought it had simply loss battery so I connected it and it still wouldn't turn on. I decided to press and hold the home and power button to try and restore it and the apple startup screen kept flashing on and off.
Eventually I was able to restore it after numerous attempts and I decided to back it up as I did not want to lose anything. Restored and everything fine again except I was left with no apps and music, so, a bit annoyed, I added a few albums and went to my bed for a nap and tried to install Alien Blue app on my phone to read to get me to sleep but crashed again.
Now I realize it's something to do with the app store so I realize I should just probably restore my iphone clean (real pain in the *** though) but now it's not letting me restore and the start up screen is just blinking on and off. Have it connected to my computer but itunes is not reading it and have gone into Services on computer and disabled then enabled Apple Phone Device but no dice.
Is there anyone that could help me please? I would really really appreciate it.
P.S. I have an iPhone 4 which I have had for nearly 2 years, my contract runs out in December.

You may of had a corrupted install. Connect to iTunes backup then restore. Or update the apps on itunes then sync to the iPhone

Similar Messages

My apps won't update after installing IOS 6.0.1. They get stuck. What's wrong?

Apps won't update after installing IOS 6.0.1. They get stuck. What's wrong?

You may of had a corrupted install. Connect to iTunes backup then restore. Or update the apps on itunes then sync to the iPhone

Mac Mini won't start after installing OS X 10.6.3

My Mac Mini won't start after installing Mac OS X Snow Leopard 10.6.3. When I turn it on, the Apple logo appears and the initialization line starts to fill, but it suddenly stops. It does that again and stops at the same point, but this time it shuts down. What should I do?

If you are coming from 10.5.8, hopefully you backed up your important data first. Your mini will need at minimum, 1 GB of RAM to install Snow Leopard and at least 5 GB of storage remaining on your boot drive.
I treat 10.6.3 as a fresh, full install over a 10.5.8 system. That means I choose Disk Utility from the Installer's menu and repartition the boot drive as a single partition, Mac OS X Extended (Journaled) format, and use the GUID partition scheme from the options button. At this point, while still in Disk Utility, I would verify the drive under First Aid.
Then I turn the installer loose, and reboot into a working 10.6.3 system, ready for the software updates that take the machine to 10.6.8.
So, following the above guidelines, reinstall 10.6.3.

Iphone 4 won't open after installing ios 7.1

Please help. My iphone 4 won't open after installing ios 7.1.. I already connected it to my pc but still didn't open. I waited for a long time, press the on/off, home buttons but still didn't work. Thanks Jah bless all..

Honsetly I do not know if they will charge you, however apple products usually have a one year warranty, such as your charging cable, might. But if you tried to use another charging cable then you will want to make an appointment with Apple. good luck

Safari won't start, after installing X Lion

Safari won't start, after installing X Lion

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the page that opens.
Step 1
Enter the name of the crashed application or process in the Filter text field. Post the messages from the time of the last crash, if any — the text, please, not a screenshot.
Important: Some private information, such as your name, may appear in the log. Edit it out by search-and-replace in a text editor before posting.
Step 2
Still in the Console window, look under User Diagnostic Reports for crash reports related to the process. The report name starts with the name of the crashed process, and ends with ".crash". Select the most recent report and post the contents — again, the text, not a screenshot. In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.) Please don’t post shutdownStall, spin, or hang logs — they're very long and not helpful.

TS3694 MY PHONE WON'T START AFTER A RESET

My phone won't work after i reset all contents

Try DFU Mode Restore. Open iTunes on computer. Connect iPhone to computer with USB cable. Hold both Home and Power button, after exactly 10 seconds release the Power Button, keep holding the Home button until iTunes recognizes iPhone in Recovery Mode, usually about 20 seconds time. If the iPhone screen is black, blank this is DFU Mode. Click the Restore button of iTunes. DFU Mode can be difficult to enter sometimes, just keep trying. DFU Mode is a black, blank screen with iTunes saying Recovery Mode.

Apps won't update after installing iOS 8

After having installed iOS 8 on my IPhone 5, which has never let me down before, I have had this ridiculous problem, which goes like this - I can't update the existing apps on my phone. Anyone else with a similar problem?

I just fixed My Wife's iPhone 5.
steps
1. deleted all apps that were trying to update
2. Reset iPhone By holding down the home and power button.
3. When the iPhone powered back on it immediately prompted us for our iTunes account information
4. Once I put that in it started downloading the apps but they got hung up again!
5. Turned off WiFi, connectEd to LTE (AT&T)
6. Apps finally pulled down.
Not sure what it is because my iPhone 6 plus can pull down apps and updates from the App Store and iTunes while on WiFi. So can all of the other iPads and iPhones in our house. And Her iPhone worked on Safari, Facebook etc.
I think it's an issue with iTunes credentials. Like they're not being passed from the device to Apple.

Windows 7 won't start after installing graphic driver

hi guys
i have a probook 4530s (i5) laptop and recently i encountered a problem with graphics.
after installing a fresh copy of windows 7 x64, i installed lates driver for graphics (sp55947) but after a reset, windows won't pass the first "starting windows" page unless i go to bios setting and uncheck "switchable graphics" option,
but after that i dont have the radeon 6490m in my device manager anymore. i also tried the latest update for bios but no success with the problem..
i hope you can help me..

@M3is4M
‎Thank you for using HP Support Forum. I have brought your issue to the appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publicly post ( serial numbers and case details).
If you are unfamiliar with the Forum's private messaging please click here to learn more.
Thank you,
Omar
I Work for HP

Ipod touch 5 won't work after installing IOS 8.2

I had gotten my Ipod in February from my boyfriend (he bought it brand new from Amazon). Recently, I had tried to install IOS 8.0.2 (the newest one) and I had accidentally shut it down, thinking it would stop the update. Boyfriend told me nothing about not updating it and just waiting. But now it refuses to turn on. there are times when it has the apple logo and it stays for a good 15 seconds but sometimes it will fade away completely. We have tried everything. The Itunes will do the restore thing but then at the end, it will say it can't finish. Help!

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

HAL won't start after install on DL585 G2

I ran a v40z for years and recently had SRSS 5.2 on S11 running just fine. This past week I replaced the v40z with a DL585 G2 and reinstalled S11 and SRSS 5.2. Everything went well except now HAL won't start failing with, I suspect, a timeout after several minutes. Using truss it is clear that devfsadm is going too slow. If I keep restarting HAL and devfsadm over and over, eventually it will start.
Is there any way to troubleshoot this further?
Many thanks,
Marty

Thanks for the reply.
I am now kicking myself because I thought I had made a copy of the truss output, but I have not. After 2 hours of tinkering, the machine is finally up and I am hesitant to mess with it any more.
The truss of devfsadm showed threads of devfsadmd stalling for about 60 seconds over and over again performing an ioctl against a devinfo file. I also wonder if this is related to the following message seen over and over in /var/adm/messages:
Mar 4 10:05:21 dl585 devfsadmd[595]: [ID 511948 daemon.error] di_init failed for /pci@0,0/pci10de,5c@9/pci103c,3305@4,4/device@1/mouse: No such device or address
There is some mouse that devfsadm thinks it has but then it can't find it. For what it's worth, there is no mouse plugged into the console. Further, I have disabled ILO via boot ROM and disabled all USB via BIOS.
Suggestions?
Thanks again,
Marty

G4 won't start after install?

Hello, just upgraded my G4 from 10.4.9 to leopard. Installation was successful, but after boot computer won't start. It shuts down right after gray screen shows. Now I started from leopard installation disk and fixed permissions. But that won't work. When I trie to start up from my HD it shuts still down right aftergray screens appeares. My comp spec: G4, 1,4GHz, 2gb ram, geforce2 video.
Ideas?

This appears to be another G4 bricking incident. There are plenty of these occurrences on these boards. You must boot from disk (hold "c" during re-start - wait until you see the spinning disc then release the "c" key). Choose disk utility, erase your disk and reinstall from scratch using the same hold "c" method. It's not a pretty solution, but plenty of us have had to figure this out the hard way. Welcome to Leopard.

SIA Won't Start After Installing BO XI 3.1 Service Pack 2

Hi
We have Business Objects XI 3.1 on Windows 2003 Server after installing Service Pack 2 that took about 7 hours and finish without problems when we try to connect with infoview appear the following message:
Error: Server mixco15:6400 not found or server may be down (FWM 01003) null
I check in CMC and SIA appears to be UP but when i try manage servers and put the administrator password i get the following message:
Unable to log on: Could not connect to server mixco15:6400. Please check that the server name is correct, and the server is running.
We restart the server several times and the server continues down also stop and start the Service Intelligence Agent and nothing happens do you know if this SP has any problem o what can I do in order to solve this everything was fine after installing SP2.
Thanks

the same error..
in the event viewer nothing about cms.
but in ccm;
there is a apache service.
there is no sia..
(the installion is xi 3.1 sp3 full)
windows services: boe120(mysql) >> started..
any suggestion?

PowerMac G4 (FW 800) Won't Start After Installing Airport Extreme Card!

After installing an Airport Extreme Card in my G4 FW 800, the computer will not Chime or Start Up; shortly thereafter, the Fan begins to Run erratically.
Without the Airport Card installed, the CPU runs normal, with the exception of the clock needing to be reset.
Any help is Greatly Appreciated! -Nico

Hey Tom, thanks for the response. I have tried holding Command-Option-R-P down (resetting the PRAM) at startup with no avail. I have also pressed the PMU button with and without the Airport Card installed. Still no luck. I am pretty stumped. I ran a hardware check on the machine, and it has come back successful without the card.
The previous owner installed an extra internal HD and some memory. I have since installed a new PCI graphics card. Do you think these have anything to do with it?

VLC problem - won't start after installing skins

Hi everyone,
after installing some skins from the vlc website, I run into the following problem: VLC starts with two instances, CPU jumps to 100%, then VLC just dies. I've deleted the skins, changed the gtk theme, reinstalled vlc and did about a million other things, but the problem persists. Running vlc or cvlc from the terminal gives me the following message:
[0x14db9c8] skins2 interface: skin: subX author: Martin Poehlmann
[0x231ebd8] dummy interface: using the dummy interface module...
So apparently it still starts with two instances, but I have no idea why. There is no subX skin in the skins folder, everything looks clean. Any ideas would be really appreciated, as this is for me the best dvd player. Thanks!

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the page that opens.
Step 1
Enter the name of the crashed application or process in the Filter text field. Post the messages from the time of the last crash, if any — the text, please, not a screenshot.
Important: Some private information, such as your name, may appear in the log. Edit it out by search-and-replace in a text editor before posting.
Step 2
Still in the Console window, look under User Diagnostic Reports for crash reports related to the process. The report name starts with the name of the crashed process, and ends with ".crash". Select the most recent report and post the contents — again, the text, not a screenshot. In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.) Please don’t post shutdownStall, spin, or hang logs — they're very long and not helpful.

NB505-N500 Won't Start After Installing New RAM

I just watched a YouTube video showing how to replace RAM in a Toshiba netbook, but now my computer won't start even after I put back in the original RAM. On the parts label, it shows D3. I bought Crucial CT25664BC1067 2GB 204-PIN PC3-8500 SODIMM DDR3 Memory Module. Can someone provide some guida...
Thank you.
Solved!
Go to Solution.

You may want to contact Crucial.
There's a lot of talk of incompatibility in the one-star reviews on Amazon, which are about 14% of the reviews.
- Peter

Phone won't start after installing iOS 6

Similar Messages

Maybe you are looking for