Photo Creation- successful install, will not run. Help

Photo Creation- It said successful install, When I run it it goes to scree saying starting up and stays there It will not run.
Can anyone help? Help

Hi Ross.
Please contact our customer support team at [email protected]
Be sure to tell them your operating system (for example, Windows 7 or Mac OS 10.6). It would also help them to know which version of antivirus software you're running. Customer support can help you figure that out if you don't know.
Thanks for trying HP Photo Creations,
RocketLife
RocketLife, developer of HP Photo Creations
» Visit the HP Photo Creations Facebook page — news, tips, and inspiration
» See the HP Photo Creations video tours — cool tips in under 2 minutes
» Contact Customer Support — get answers from the experts

Similar Messages

  • Itunes error 45075, itunes will not run help

    from a system clean up and deletion of restore points!! iTunes ill not run I have tied reinstalling, repairing, uninstalling following with an install and still it will not run! I have obviously deleted something relatively important and now the computer has no restore point which will resolve my issue.
    Help is greatly appreciated.

    The 2096 erro may be associated with running in compatabilty mode, see:
    http://docs.info.apple.com/article.html?artnum=305212
    None of the tick boxes on the compatability tab should be checked.
    It is also worth checking iTunes.exe in c:Program Files\iTunes.

  • Premiere Elements will not run - HELP

    This is infuriating as I had the same problem with PE 8.  I have installed the trial version of PE10 and when I run the application I get the "Welcome to" screen but when I click on either start new project or open project in seems to go through lots of start up loads, then - nothing.  The last thing it does is say "loading Importerquicktime.prm" then it dies leaving the "welcome to" screen.  What is wrong please.  I had loads of issues with PE 8.  It is not looking good for this latest version.

    Buy and install a 2nd internal hard drive for all of your video files and projects... 7200rpm and not a "green" drive
    Or, use an eSata external hard drive... again, 7200rpm
    My 3 hard drives are configured as...
    1 - 320Gig Boot for Win7 64bit Pro and all program installs
    2 - 320Gig data for Win7 swap file and video project files
    When I create a project on #2 drive, the various work files follow,
    so my boot drive is not used for the media cache folder and files
    3 - 1Terabyte data for all video files... input & output files (*)
    (*) for 4 drives, drive 3 all source files & drive 4 all output files
    Search Microsoft to find out how to redirect your Windows swap file
    http://search.microsoft.com/search.aspx?mkt=en-US&setlang=en-US
    http://forums.adobe.com/thread/784220?tstart=0
    Trying to use only ONE Hard Drive for Video Editing
    You are a music conductor, with a baton that you use to point to various parts of the orchestra... this is like Windows pointing to various parts of the hard drive to do Windows housekeeping or to load program segments for various functions
    Now, at the same time and with the same hand... while still using the baton to conduct the orchestra... pick up a bow and play a fiddle... this would be doing something with your video file at the same time as all the other work
    You as a person cannot do both at the same time with the same hand
    A computer is a LITTLE better, in that it can switch from one kind of task to another very quickly... but not quickly enough for EASY video editing
    You need AT LEAST two hard drives (separate drives, never a partition http://forums.adobe.com/thread/650708 for more) with Windows (or Mac OS) and software on your boot drive, and video files on a 2nd drive so the boot drive is not slowed down by trying to do everything
    I find that the three drives I use work very well for me, for editing AVCHD video... some people use a 4th drive, so video INPUT files are on drive three and all OUTPUT files are on drive four... I only bought a mid-tower case instead of a full tower case (my bad... but had to fit in the space available on my office desk!) so I use the three drives that will fit
    Depending on your exact hardware (motherboard brand & model AND USB2 enclosure brand & model AND external hard drive brand & model) AND the type of video file, you may... or may NOT... be able to use an external USB2 hard drive for SD (Standard Definition) video editing
    Steve Grisetti in the Premiere Elements forum http://forums.adobe.com/thread/856208 and Jim Simon in the Premiere Pro forum http://forums.adobe.com/thread/856433 use USB externals for editing
    A USB3 hard drive connected to a motherboard with USB3 is supposed to be fast enough for video editing (I don't have such, so don't know) but eSata DOES have a fast enough data transfer for video editing... I have not used the eSata Dock below... for reference only, YMMV and all the usual disclaimers
    http://www.amazon.com/Thermaltake-BlacX-eSATA-Docking-Station/dp/B001A4HAFS/ref=cm_cmu_pg_ t

  • Error   -2096,       iTunes will not run  HELP AAAAAAAAARRRGGGGGGHHHHHHH

    Anyone PLEASE HELP.......
    My processor died so I now have a new one.
    I have been forced to download the new version of iTunes.
    Everything seems ok until I try to "run" iTunes and the following error message appears.
    Quick Time Unavailable"
    "Quick Time failed to initialize (error-2096)."
    "Quick time is required to run iTunes."
    "Please reinstall iTunes".
    Quick Time operates fine on its own.
    I have reinstalled iTunes multiple times with no success. Is there a fault with the latest software. Earlier versions worked fine !

    The 2096 erro may be associated with running in compatabilty mode, see:
    http://docs.info.apple.com/article.html?artnum=305212
    None of the tick boxes on the compatability tab should be checked.
    It is also worth checking iTunes.exe in c:Program Files\iTunes.

  • CMC will not run HELP!!!! (Tried conifuring it to use SSL)

    Looking for Help. I was trying to configure Business Objects to run with SSL port 443. I configured the Web Application Container Server Settings to use 443. Reboot the server and now I cannot acces CMC through port 6405 or through SSL. My first goal now is to get the BO Server back up and running and I will worry about the SSL later. I did find the config.xml file and tried to change the settings back manually, but they keep getting overwritten each time the server starts back up.
    If anyone has a solution please let me know ASAP as I am in desperate need to get this server back up and running.
    Thanks.

    my mac is 24inch from early , Mac OS X Lion 10.7.5 9 (11g63b) . and yes fcpx has been working fine for months now but on my last project it started making me force quit everytime i try to use it now. i followed the steps with reseting the preferances but i didnt work. i also tried deleting the app and reinstalling , and disk permissions all failed. can u help me out?

  • Install will not run. Box comes up asking to run but nothing happens.

    I go to Mozilla, click download Firefox, Get install stub exe. Click on run, box asks to allow to make changes on machine, Click yes and nothing happens. Internet connection is fine. No firewall issues.

    Hi there,
    In order to be able to find the correct solution to your problem, we require some more non-personal information from you. Please do the following:
    *Click the Firefox button at the top left, then click the ''Help'' menu and select ''Troubleshooting Information'' from the submenu. If you don't have a Firefox button, click the Help menu at the top and select ''Troubleshooting Information'' from the menu.
    Now, a new tab containing your troubleshooting information should open.
    *At the top of the page, you should see a button that says "Copy text to clipboard". Click it.
    *Now, go back to your forum post and click inside the reply box. Press Ctrl+V to paste all the information you copied into the forum post.
    If you need further information about the Troubleshooting information page, please read the article [[Use the Troubleshooting Information page to help fix Firefox issues]].
    Thanks in advance for your help!
    cyborg4

  • Installed Acrobat XI Standard on windows 8.1, see it in my download folder but it will not run?  Help?

    Installed Acrobat XI Standard on windows 8.1, see it in my download folder but it will not run?  Help?

    Also, once you successfully install, please backup the install file to a separate HD and/or CD. I agree that your comment is not clear. You say you installed it, but it is simply in the download folder. Did you run the install file that you downloaded? The download does not install the program, but the install is an extra step.

  • Installed CS6 and all working except Photoshop. Says application will not run on this mac despite my having the necessary system requirement of OSX 10.6.8. Can anyone help please?

    installed CS6 and all working except Photoshop. Says application will not run on this mac despite my having the necessary system requirement of OSX 10.6.8. Can anyone help please?

    Hi - I have opened a second log with the same date and name and am now tracking down the problem.
    This seems to be the problem for me: Error "Exit 6" or "Exit 7" | Install log | Read, write, system file errors | CS5, CS5.5

  • Beta 4 ver 6 installed on Mac Snow Leopard 10.6.4 will not run, will not delete, cannot reinstall any other version of mozilla, also mozilla help is useless and too confusing, is there not just a simple email address to ask for help?

    Firefox tries to run, mac says name too long. It will run only when mounted but will not run from Applications. It refuses to delete and stays in trash, must use combinations of DropNuke2 and Trash to get it to delete I think! Then when trying to put any other version of Firefox in Applications, Finder states name already exists then refuses to move the Firefox application to APplications! Never had problems with Firefox until installed the stupid beta 4 ver 6!

    It turns out that there's something wrong about permissions.
    Here's the fix:
    (1) log in as the +root user+
    (2) type +chown -R Michael:staff ~Michael+
    (3) log out the +root user+
    (4) log in your account
    (5) done!
    Hope this thread will help those who encounter the same problem as me!

  • HT1349 I don't have a MAC, I have a PC and itunes will not run because I had an update and now it says msvcr80.dll isn't working or not installed and wont let me run itunes help me fix it.

    I don't have a MAC, I have a PC and itunes will not run because I had an update and now it says msvcr80.dll isn't working or not installed and won't me install or run itunes anymore help me fix it.

    MSVCR80.dll missing, cannot install iTunes - https://discussions.apple.com/message/24618776

  • Bridge CC on opening gives "Adobe Bridge CC has stopped working" Uninstalled, re-installed same error, will not run. "check online for a solution" does nothing.

    Bridge CC on opening gives "Adobe Bridge CC has stopped working" Uninstalled, re-installed same error, will not run. "check online for a solution" does nothing.
    Bridge worked great for a while then started to fail when starting. Old Bridge CS6 still works fine. HELP ... please.

    You problem is in the Fault Module MSVCR80.dll
    Do a web search for this.  Here is one LINK

  • Help Flash player will not run in Internet Explorer 11?

    I have downloaded Adobe Flash Player and it will not run in Internet Explorer 11.  I have done the things suggested in the help/forum section. What else can I try?

    This is a known problem with Internet Explorer 11, which Microsoft has been aware of since October 18 when they released their latest "untested" browser. The pages can't recognize the browser, so they don't recognize any of the plugins, like Flash Player. So far, Microsoft has made NO indication that they have any plan to fix it soon.
    Microsoft's recommendation is to use Compatibility View for affected pages, and "pretend" you're using an different browser. Trouble with that is it has seen limited success at best, and you have to individually enable it for EVERY page that has problems.
    I'm not big on "pretending" so I recommend actually using another browser.
    Firefox (from Mozilla)
    Opera (from Opera)
    Safari (from Apple)
    Chrome (from Google)
    ANY of those will work where IE11 won't, with the Flash Player Plug-in (For all other browsers), and Chrome doesn't even need that because it has its own Flash Player plugin built in.

  • I just finished installing 11.3 and now iTunes will not run.

    I just finished installing 11.3 and now iTunes will not run. I have uninstalled itunes and resinstalled several times. Now when I attempt to start iTunes i get the following two error dialogues:“The procedure entry point ADiAdID_AcquireMatchSlotIfNecessary could not be located in the dynamic link library iAdCore.dll. and was not installed correctly. Please reinstall iTunes. Error 7 (Windows error 127)

    Hi Greybeard1955,
    Welcome to the Apple Support Communities! I understand that iTunes is not opening after uninstalling and re-installing it. When iTunes is uninstalled on a Windows computer, all of its components must be removed as well and they must be removed in a specific order. Below is the article for uninstalling on Windows 7. I recommend uninstalling iTunes and all components in order and reinstalling fresh.
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
    http://support.apple.com/kb/ht1923
    1. Remove iTunes and related components from the Control Panel
    Use the Control Panel to uninstall iTunes and related software components in the following order and then restart your computer:
    iTunes
    Apple Software Update
    Apple Mobile Device Support
    Bonjour
    Apple Application Support (iTunes 9 or later)
    I hope this helps,  
    -Joe

  • Error: 3816: Local System Creation during install was not successful.

    Hello,
    This is our first time installing Oracle Wokflow 2.6.3 Standalone.
    We are having problems with the Event Manager.
    When we access the event manager pages:
    … pls/wf/wf_event_html.listevents?resetcookie=T
    …pls/wf/wf_event_html.listsystems?resetcookie=T
    etc.
    We get this error:
    Error: 3816: Local System Creation during install was not successful. Please review the install log file for errors.
    Error Stack:
    WF_EVENT_HTML.isAccessible(EVENTS)
    WF_EVENT_HTML.ListEvents()
    •     The installation was successful.
    •     We cannot change the Local System in the Global Workflow Preferences option.
    •     The table WF_systems is empty.
    •     Should the local system appear in this table?
    Thanks

    Software component sap.com/LM-TOOLS with version 7.00.9.3 is found on the system but in the stack it is listed with version 7.00.9.0.
    Software component sap.com/SAP-JEECOR with version 7.00.9.1 is found on the system but in the stack it is listed with version 7.00.9.0.
    You are trying to upgrade a system with the lower version of sap.com/LM-TOOLS and sap.com/SAP-JEECOR. The other thing I notice is that if you are upgrading to  EhP4/EhP1 NW then the version of LM and SAP-JEECOR should look something like 7.01.3.0.
    Are you using MOPZ to download EhP's ? As the error message says synchronize the system with SAP Solution Manager and then generate a new stack file.
    Hope this helps.
    Thanks,
    Naveed

  • I am trying to install the trial version of Acrobat but the file AdobeDownloadAssistant.exe will not run -it gives an unnumbered error that the file is not configured correctly. "This application cannot be installed...Please contact the application author

    I can't install the trial version of Adobe Acrobat because the AdobeDownloadAssistant.exe will not run. I get this error:
    "This application cannot be installed because this installer has been mis-configured. Please contact the application author for assistance."
    I completed the trial questionnaire & all seemed well. Can anyone help?

    Downloadable installation files available:
    Suites and Programs:  CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
    Acrobat:  XI, X | 9,8 | 9 standard
    Premiere Elements:  13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
    Photoshop Elements:  13 |12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
    Lightroom:  5.7.1| 5 | 4 | 3
    Captivate:  8 | 7 | 6 | 5.5, 5
    Contribute:  CS5 | CS4, CS3
    Download and installation help for Adobe links
    Download and installation help for Prodesigntools links are listed on most linked pages.  They are critical; especially steps 1, 2 and 3.  If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

Maybe you are looking for

  • Exchange rate difference while posting ME21N MIGO and MIRO

    Hi All, I am facing one problem with exchange rate type between M and EURX  and EURX is maintanined in the SPRO>SAP Netweaver>General Settings>currencies>Check Exchange rate types EXRT :  EURX Usage    :  EMU Reg,fixed                        Ref.Curr

  • What happened to ImageReady?

    I used to use ImageReady to create rollovers for web sites. ImageReady no longer exists in CS3. Ive looked through the Video Workshops and the help files on both Photoshop and Dreamweaver. There is little or no mention of creating rollovers in anythi

  • Edit Existing Site With Dreamweaver

    Im sure this question has been asked 100 times but how do I edit an existing site (published and on the web) with Dreamweaver CS5.5? I took over as webmaster last month at a company and would like to edit the companys website. How do I download the f

  • How to paste from Word and retain formating

    My co-worker and I are both running Dreamweaver. However for some reason I can copy and paste from Word into Dreamweaver and retain the formatting (bold/italic etc) but she can not. I've done searches on this board and online in general but haven't f

  • OracleDBConsole service cannot start

    Hi all, I installed Oracle 11g software on a Windows XP SP2 machine with 1 GB RAM. I then used DBCA to create a db and in the end of the db creation the following error raised: error screenshot: http://www.ahmedbaraka.com/temp/error.jpg logfile URL: