Photo screen saver pixellated after Leopard installation???

Did an archive and install of Leopard (past experience tells me to NEVER do an upgrade to a new OS), and everything seems great, except for my screen saver. I am set up for a slideshow screen saver, and now, half the images in the screen saver come out pixellated in the screen saver. The original images in iPhoto are perfectly fine, just when they're viewed through screen saver.

Hi Brad.
I tried installing Onyx (version 1.8.3) and got a message saying it wouldn't run with my version of the OS. I am running 10.5.1 (Leopard). Which version of Onyx did you use?
I've had the same problem of some photos being pixellated while others are sharp. I figured I needed to see if I could set the screen saver to reject files under 100K or so.
Thanks!
Fred

Similar Messages

HT5706 photos on screen saver gone after update of apple tv

photos on screen saver gone after update of apple tv

Welcome to the  Discussion Forums
Why are you looking in a shared library, is itunes set up as a secondary library.
See This
If you are set up as a primary library you need to look in my tv shows.
When you say you have reinstalled everything, does that include itunes (if so how did you do that), does it include rebuilding your itunes library.

Photo Screen Saver weird random images appear

When the photo screen saver runs, I get random icons pictures appear on top of good photos. Pictures of Country flags, tiki masks, guitars, and other iconic like pictures show up on hi-res photos. It randomly happens, and I do not have these other pictures stored anywhere on the mac... I know it sounds a little crazy, but does anybody else have this problem?

This is not isolated to Leopard 10.5.X only.
I had the same weirdness with 10.4.X.
The Pictures folder inside your home directory is the root of all your iPhoto pictures database, iChat icons and what ever pictures you put in there.
If in Screen Saver you chose your Pictures folder then Screen Saver has access to every single picture within that folder. That includes iChat icons and your iPhoto folder.
Some of the weird pictures I saw came from the iChat icon folder. The pixelated and vertical pictures that you see comes from the iPhoto folder. The pixelated ones are the cashed iPhoto icons and the vertical ones are the original unmodified iPhoto photos. Yes rotating a picture is a modified one.
Before iPhoto 2008 the contents of the iPhoto folder was viewable by anyone. With iPhoto 2008 the folder looks like a single file. That was most likely to stop inexperienced users from wrecking havoc to there iPhoto database and then complaining about iPhoto.
I do not remember if the database of iPhoto 2006 is closed or opened and I do not know Screen Saver will have access to the contents of the now closed iPhoto 2008 data file.
You might still have weird iChat icons, that look like flags, if you chose the Pictures folder.. if default link iChat icons is still there.
I do not personally use the Screen Saver but I am pretty sure that by choosing an iPhoto folder will fix the weirdness permanently.
Hope this helps

Photos Screen saver problems in Windows 7

Photos screen saver crashes most of the time when I move the mouse to exit.
Round circle, this application is not responding etc.
This is pc upgraded from Vista

Hi sven253,
Is there any third party screen saver software installed? If so, please uninstall it and see if the issue occurs.
As Magon mentioned, Clean Boot is a good method to check if the issue is related to third party software and services. If the issue disappears in the Clean Boot environment, we can use a 50/50 approach to quickly narrow down which entry is causing the issue.
Also, please test the Sample Pictures came with Windows 7 and see if the issue exists:
1.     Right click on the Desktop and then click Personalize.
2.     Click Screen Saver.
3.     Select Photos and then click Settings…
4.     Browse the folder to C:\Users\Public\Pictures\Sample Pictures
5.     Click Save.
6.     Click OK.
What is the result? If the issue persists, please test if the issue occurs using other screen saver, such as 3D Text or Bubbles. However, if the issue does not occur using Sample Pictures, could you please provide the following information for further research?
·          What is the file types you are using? Are they .jpg file or .bmp files?
·          What are the file size of each photo?
·          How many files are there in photo folder?
·          When did the issue first occur? Did it occur after installing certain software or changing some hardware?
Hope this helps.
Regards,
Linda

Keynote disappeared after leopard installation

I AM HAVING SOME SERIOUS DATA LOSS AND PROGRAM LOCATION PROBLEMS AFTER LEOPARD INSTALLATION.
I can not find my previous keynote application program , which was part of ilife08, where did go?
same thing with adobe files , every program is trial version after LEOPARD INSTALLATION.

Ahh, welcome to the wonderful world of wifi under Leopard. Maybe you weren't aware that tens of thousands of people have been having endless problems with wifi whilst using Leopard .... I just got back from holiday - full signal yet no internet. Connect using ethernet and there it is - working perfectly. The culprit? Apple's very own Airport extreme base station, the new one which I bought thinking my old one was on the blink - nope.
Meanwhile Apple have not said a word about this in the last 8-10 weeks of utter misery for countless people - not a sausage. Many people are counting on 10.5.2 fixing this. I say don't count on it. Remember to complain to Apple as it is their own software/hardware that is at fault here. Meanwhile, they introduce a ... wifi laptop.... ooh the irony.

Software Update Issue-After Leopard Installation

I installed Leopard yesterday and ran the first software update; everything worked OK; the first software updated included three updates: Remote Desktop Client update; iDVD update and Garageband update.
Today I tried to run another update and had this issue: while the Software Update is displaying a message saying "New software is available for your computer" there is nothing listed below and the install button is disabled! Then I went to the Software Update Preference and saw a message there saying Last Attempt Failed; error occurred while checking
Does anyone have the same issue while trying a new software update after Leopard installation?
I do understand there is another new update issued yesterday by Apple regarding login key
Grateful for any insight re this problem

Hi. I had the same problem after doing an erase and install of Leopard yesterday. When I go into Terminal (actually iTerm) and type "softwareupdate -l" (to list all updates), I see:
XML parser error:
Encountered unexpected EOF
Old-style plist parser error:
Malformed data byte group at line 1; invalid hex
This appears to be a problem with com.apple.SoftwareUpdate.plist, the property list for Software Update, but I'm not sure. If I type "find ~/Library/ -name '*plist' -exec plutil {} \;" to check all the plists, however, the Software Update plist checks out as OK. Furthermore, deleting that property list and rebooting to force the OS to create a new plist does not fix the problem. Weird. Now, if I type "sudo softwareupdate -i -a" to install all updates (change "-a" to "-r" to only install recommended updates), it works fine. I still get that same error when I try to run Software Update normally afterwards, but if I go to the preferences, all of the updates are listed under Installed Updates. So, I can get the OS to update automatically, but only through the Terminal. This is very weird, and I hope someone can shed more light on this situation.
Message was edited by: timocrates

Screen Saver Pixelation Problem

Greetings All;
Here is a weird situation: After several minutes of inactivity, my Mac will go into the Screen Saver mode and display pictures from my Pictures folder. About third to half of the pictures displayed will be pixelated - not clear. The pixelated pictures are random.
How can I fix this problem?
Thank you.

Hi ya Bruce;
You the Man! It worked! Kinda strange that the Pictures folder has the problem but not Photos.
Thank you. Thank you.

Computer won't start properly after Leopard installation attempt

Yesterday I tried to install Leopard 10.5.6 on my G5 (currently running Tiger 10.4.11) and ran into a ton of problems. First, a message came up preventing me from upgrading without erasing my hard drive. I decided to quit the installer and back up my drive before erasing it, but after trying to start up again on my main disk, the computer will no longer get past the Apple logo screen. It stays that way for several minutes, and the computer revs and revs until it's at max RPM, then the computer just shuts off. I can't access my data to back it up.
I did some internet research and tried started up from the install DVD again (which still works) and tried to repair my disk using Disk Utility. This didn't work and an error message came up: "Attempted to Repair Disk, attempt failed. Invalid Node Structure, Volume Check Failed. Error: The underlying task reported failure on exit."
If anyone has any advice I would be VERY grateful, I am hoping to not have to have the computer repaired as I already have my other Mac out of service as well and the cost of repair has been high. I need to back up some important files before I update to Leopard, is there any way to do this while starting up from the DVD since my Startup disk doesn't work now? What happened??!!!

Is it possible that the piece stuck in the audio jack has resulted in turning off the internal speakers?
I would say that the Leopard installation is not 100%. Sometimes this happens. Or you may have a piece of software installed that mutes the speakers, and it needs to disable that. If it's not the latter, then I would erase the hard drive and reinstall from scratch. If that's not feasible then you can do the following:
How to Perform an Archive and Install
An Archive and Install will NOT erase your hard drive, but you must have sufficient free space for a second OS X installation which could be from 3-9 GBs depending upon the version of OS X and selected installation options. The free space requirement is over and above normal free space requirements which should be at least 6-10 GBs. Read all the linked references carefully before proceeding.
1. Be sure to use Disk Utility first to repair the disk before performing the Archive and Install.
Repairing the Hard Drive and Permissions
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported, then quit DU and return to the installer.
2. Do not proceed with an Archive and Install if DU reports errors it cannot fix. In that case use Disk Warrior and/or TechTool Pro to repair the hard drive. If neither can repair the drive, then you will have to erase the drive and reinstall from scratch.
3. Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When you reach the screen to select a destination drive click once on the destination drive then click on the Option button. Select the Archive and Install option. You have an option to preserve users and network preferences. Only select this option if you are sure you have no corrupted files in your user accounts. Otherwise leave this option unchecked. Click on the OK button and continue with the OS X Installation.
4. Upon completion of the Archive and Install you will have a Previous System Folder in the root directory. You should retain the PSF until you are sure you do not need to manually transfer any items from the PSF to your newly installed system.
5. After moving any items you want to keep from the PSF you should delete it. You can back it up if you prefer, but you must delete it from the hard drive.
6. You can now download a Combo Updater directly from Apple's download site to update your new system to the desired version as well as install any security or other updates. You can also do this using Software Update.

Desktop & Screen Saver die after installed aperture

After I installed Aperture 2.0. I can't add new folder at Desktop & Screen Saver anymore. After I reinstall the leopard, It still happen after I installed Aperture. Is anyone have the same experience ?

yes ... it is a leo problem ... the fix has been to create a null (empty) iPhoto library ...
search here for desktop preferences ...

Photo Screen Saver not functioning with Yosemite Upgrade

Recently I upgraded my MacBook Pro to Yosemite. I have always used a folder in iPhoto for my screen saver via system preferences. Ever since the upgrade this folder will no longer function as the screen saver. The screen saver option in System Preferences always defaults to Apples National Geographic photos that is installed with Yosemite. After I select the folder I want I "preview" the screen saver and my photos are there. Once the screen saver kicks itself in, the NG photos are there and the system settings are back to NG photos and not my photos. Now, I will admit the NG photos are far above my photos, but I really prefer my photos. Is Apple evaluating photo quality on the screen savers? Kidding - any ideas?
Scott

I have the same issue.
Try this. I think this has worked for me. Only time will tell.
This solved my question by dominic23 on Oct 22, 2014 4:33 PM
Close all windows and quit all applications.
Hold the option key down and click the "Go" menu in the Finder menubar.
Select "Library" from the dropdown, then "Preferences" folder.
Look for these two files.
com.apple.desktop.plist
com.apple.systempreferences.plist
Right click each one of those and select " Move To Trash" from the contextual menu.
Restart the computer.

FIX for Canon MP 600 after leopard installation

I discovered a fix for the Canon MP 600 after the leopard installation. After many challenges and troubleshooting with no positive results I tried something that worked!
Go to Applications on the HD, choose Utilities, Choose airport Utility.app. It will open and ask if you would like an update to the Airport Extreme Utility. Choose 'update' and follow instructions. I then went into the System Preferences, removed the MP 600 printer, downloaded the MP 600 driver from the Canon Website and installed it. I then rebooted the computer, went back to System Preferences, added in the MP 600 and all was working well.
I hope this helps someone.

on the 'rinting' topics, someone suggested throwing away all the drivers and downloading from the websiet. And it worked.
thanks to all who thought about it

ISight not working after Leopard installation - 1st Generation MacBook

My iSight is no longer working on my 1G MacBook after Leopard clean installation. Does anyone have this problem?

What problem are other people having? My iSight also failed, but it's the strangest problem I've ever had with my Mac. It will turn on and stay on when it should, but the image is dark to start out with and fades to black.
Other people are mentioning systems not recognizing the camera at all. Is this the case across the board or is anyone experiencing what I mentioned here?

Cannot clear screen saver picture after sleep. A restart is required to resume work.

A three year old iMac owned by a friend freezes after sleep. It seems the screen saver picture will not clear. A force quit or finder restart does not work. Only way to resume work is to restart the computer.

Turned out a bad USB device was preventing sleep. Once I removed it the display went to sleep like a baby.

Photo screen saver

I'm trying to figure out how to control which photos go to the screen saver on the apple tv. Not the photo stream, but my albums. I would like it to play multiple albums at the same time, and yet current downloaded photos do not appear. Help

Welcome to the Apple Community.
You can only select a single album to use with the screensaver. You can make that choice in settings > screensaver.

Is google photo screen saver incompatiblwe with the new Firefox 4? It worked fine till I downloaded the new FF 4. Any fixes?

Google screen saver quit functioning after the new FF4 was loaded. Keeps asking me to download it again (GSS). What gives? How do I fix this?

Have you rebooted your home router?

Photo screen saver pixellated after Leopard installation???

Similar Messages

Maybe you are looking for