Photo Stream not showing all my photos.

I recently misplaced my iPhone 5 but because it was near the end of the contract I took another one out and bought the IPhone 6. When I got the phone I thought all my pictures if not some would be in the photo stream but they're not so every single one of my pictures throughout the years have gone.
IS there anyway that the other pictures from the Photo Stream can be recovered because it means a lot to me.

If the Photo Stream photos that are missing are over a month old, or if you had more than 1000 photos, then they are no longer on the Photo Stream. The Photo Stream is not designed as a backup for your photos. It's primary purpose is to share photos among devices signed onto the same iCloud account. If the missing photos were on your Camera Roll as well, and you have an iCloud backup, you can restore to that backup.
If they were not, and you did not import your photos to your computer, then they are gone. Sorry
GB

Similar Messages

  • Shared Stream not showing all shared photos on all devices

    So, we have setup a shared stream in Photos to share family moments.  The main issue we are experiencing is that on my iPhone I am not able to see contributions from one family member, but on my iPad they show up.  Both are iOS 7, and have been through all the troubleshooting steps though have not done the "turn off sharing, and delte all photos" step.  Any ideas on why or how that would be happeing?  Thanks!

    You can apparently force ios6 devices to receive the subscriber contributed photos by turning off shared photo streaming and turning it back on again. It is under General Troubleshooting in the following link:
    http://support.apple.com/kb/TS4379
    A similar workaround did not work with iPhoto 11.
    To get around this, I've been re-sharing the subscriber contributed content and deleting the original from the stream. They show up, but not a very elegant solution.

  • Why is my photo stream not showing all the pictures on my mac?

    I just got a mac and im trying to save photos from my iphone over to my mac, the photos are in my iphone's photostream, however when i get onto my macs they dont show up, it shows a good majority but a handfull just arent there. is there any way to fix this ?

    Try disabling photo stream on your device (settings > iCloud), restarting your device and then re-enabling photo stream.
    If this doesn't help you may need to reset photo stream. You can do this at icloud.com by clicking on your name in the top right corner and then the advanced settings in the pop-up dialogue box that appears.
    Note: disabling photostream and re-enabling it will result in any photos that are currently in the photostream album on your device, that are older than 30 days old, not being added back.

  • Aperture is not showing all photos in photo stream.

    Aperture is not showing all photos in photo stream.  I have re-set photo stream from within the aperture app, but it only downloads a small fraction of my photo stream.  Any ideas?

    Sorry but you're wrong, as the article that you quoted pointed out
    Since your Mac has more storage than your iOS devices, your photos automatically download and your Mac keeps every photo from your Photo Stream by default

  • Photos 1.0 not showing all images from Photos Library.photoslibrary folder/file after update install

    I installed the update that changed my iPhoto to Photos 1.0, and the new Photos program is not showing all images from Photos Library.photoslibrary file/folder (not sure to call it file or folder since it is actually a folder with all my pics but it acts more like a file) after update install.  The Photos Library.photoslibrary file/folder shows to be 55 gb in size, and it shows to be loaded into the photos program, but there are maybe a few weeks of pictures showing instead of a few years.  Lots of pictures in the 55 gb are not showing for some reason. 

    No - iPhotos has not replaced anything - it is new and an addition - iPhoto is still on your system in the applications folder and still works just fine
    Outlook is not supported by Photos - not sure if the support must come form Apple or MS as Photos uses a different interface to external packages than iphoto did
    LN

  • Photos in iphone 4s photo stream not sync all with macbook air in iCloud

    why the photos in my iphone  photo stream not sync all to macbook via icloud?  Its like when i have 20 photos in iphone photo stream, then only 15 photos sync to macbook. Under one apple ID, do not understand why is that.  Is anybody else have the same issue or anyone can help out?

    Exactly what suggestions have you followed and what was the result?
    First, be sure that you are logged into the same iCloud account on both devices.
    Settings > iCloud

  • I have much fewer pics on my pc photo stream than my ipad and iphone. how can i get my pc photo stream to show all my pics?

    I have much fewer pics on my pc photo stream than my ipad and iphone. how can i get my pc photo stream to show all my pics?

    This is all just a partial answer since details will depend upon how you want to do it.
    Post by Zevoneer: iPod media recovery options - https://discussions.apple.com/message/11624224 - this is an older post and many of the links are also for old posts, so bear this in mind when reading them.
    Commercial software utility for transferring songs from i-device to Mac - http://www.fadingred.com/senuti/
    http://support.apple.com/kb/HT1848 - just media purchased from iTunes Store
    You'll need to get it all onto one iTunes collection on your Mac Pro, then sync the devices to that.  iTunes only lets you transfer purchases from a device, otherwise you have to use third party software.
    I guess you could also look into getting iTunes Match.

  • Lightroom not showing all photos avail for import

    About a week ago, I tried to import some new photos into LR 3 (3.4.1 to be exact), and the import dialogue does not show all the photos that should be available for import.
    The files are on my hard drive and there are approximately 200 photos in the file folder. When I open LR's import dialogue to import the photos (after navigating to the proper location to import from of course), it shows me 17 of the photos in the file folder! I selected "all" instead of "new" to see if that would make a difference and it did not. I made sure I did not have "do not import suspected duplicates" checked, even closed LR and rebooted my computer.... that didn't work.
    I tried creating a new catalog to see if that would fix the issue, and it did not.
    I'm not sure what else to try, or if there is a known fix out there (having a heck of a time finding one in my internet search!)
    Any ideas/suggestions?
    Thanks!
    -KBP

    Okay, so for giggles I tried checking in the Bridge to see if that changed anything... and it only showed the few files too. So I decided to "select all" and noticed at the bottom left that it listed the balance of my photos as "hidden." I have no idea how my files got hidden, or why it was only some and not others... but at least it's all fixed now and I can get back to what I need to do in LR!

  • Events not showing all photos.

    I am running iPhoto '11 on OSX 10.7.4  Some events are not showing all the photos.  The files are there when I look in finder at the original file.  I've tried rebuilding the library but that didnt work. Any suggestions?

    No I have not... I'm hoping for an upcoming update release soon...

  • When i go into finder   click on pictures why dose it not show all photos just lets me open iphoto

    when i go into finder   click on pictures why dose it not show all photos just lets me open iphoto 

    Ralph9430 offers a good suggestion.  But you may need to do this before taking his advice:
    Check in iPhoto's Preferences (which you can open from the iPhoto menu).  Look in General, and make sure "Connecting Camera Opens" is set to "Image Capture").
    If it is set to "iPhoto", you won't be able to get to Image Capture easily.

  • IWeb not showing all my published Photo Galleries for Widget insertion

    I have published a page created in iWeb to my mobileme account
    Today I went to edit it and add a Widget - Mobile Me Gallery
    It only shows 3 of the 4 galleries and of course the one I want to insert is the one not showing
    All galleries are published with ability to see, load, download etc..
    I have rebooted etc and its still the same.

    Chris Field wrote:
    Is this helpful? Is this even English?
    Chris ~ Be thankful it doesn't say: "_For all intensive purposes..._". This Apple doc may be clearer:
    _iWeb 2.0: Adding live web content or HTML to your site_
    Chris Field wrote:
    From the site http://iwebfaq.org/site/iWebHTMLSnippet.html:
    When you post a link, switch from Compose to Preview mode and click on the link to make sure it works — the colon in your link causes it to misdirect.
    There's no guarantee that MobileMe chat will get results...
    +"Advice is given freely because so much of it is worthless."+ ~ James Geary
    +"Advice is one of those things it is far more blessed to give than to receive."+ ~ Carolyn Wells
    ...With that in mind, another approach is to join the +Apple Developer Connection+ — the +ADC Online+ category is free, here:
    ...then you can use this to create a trackable problem report:
    And no, you don't need to be a "developer" to join — just an Apple user who wants to make sure Apple knows there's a bug and have the ability to track its resolution.

  • Filter Panel in Bridge not showing all the categories

    I am using Bridge CS5 and I download my photos to my laptop using Canon's EOS Utility program. In the Filter Panel on the left I get only a few catogories for some folders where for other folders I get the total of the categories. When I do click on a folder, then while it is collecting all the photos you can see all the categories for a few seconds but then it ends with sometimes just 3 categories. I am using Windows 7 on a 64bit laptop. All the categories in the dropdown box are also marked but still they do not show all in the panel.
    What I now saw was if I go to the thumbnails in the Content Panel and I just click on a thumbnail and move it around and back again then a small 600byte ".bridgesort" icon appears and then all the categories show in the Filter Panel for that folder. Anybody knows what is going on? Thanx

    In the Filter Panel on the left I get only a few catogories for some folders where for other folders I get the total of the categories.
    The filter panel reflects the data of the content panel and while it seems this panel has a mind of its own it only shows categories if there is a choice in a category to filter. For instance having landscape and portrait files in the folder orientation shows landscape and portrait, if you want only landscape this is an option to use this filter for showing only landscape in the content panel. When you have only landscape in the folder there is nothing you can filter because everything is the same and therefor it shows no option for it.
    What I now saw was if I go to the thumbnails in the Content Panel and I just click on a thumbnail and move it around and back again then a small 600byte ".bridgesort" icon appears and then all the categories show in the Filter Panel for that folder. Anybody knows what is going on?
    You obviously have used the menu View / show hidden files activated. What you see is a small file that contains data for the sort order you have used. The moment you move one file to a new position the sort order changes to manual.
    If you deselect the option to show hidden files you won't see this file also.

  • Media Go not showing all phone's content

    Why does Media Go not show all my music and photos?

     http://talk.sonymobile.com/t5/Xperia-S-SL-acro-S/Google-Play-Services-cannot-be-found/m-p/1009358/highlight/false#M40125 based on your last post, it seems that you have rooted your phone, have you done anything else other than rooted the phone? 

  • The library module in 4.3 version does not show all the images

    The library module in the version 4.3 of Lightroom does not show all the images. They are marked with gray boxes instead of images. This is especially true of the images which I tried to import to Lightroom since I downloaded 4.3 a few weeks ago. If I want to seen an image, I have to go to the develop module to see it. What should I do?  Get this fixed now!!!!!!!!

    My bet would be on a corrupt preview folder.
    Your preview folder is located in the same folder as your catalog. It has the same name as your catalog with the word Previews.LRDATA at the end of the name. Rename this folder and let Lightroom rebuild the previews. Go to Library>Previews>Render Standard-sized Previews.  See if that fixes it.
    If it doesn't, you may want to have a look here: http://helpx.adobe.com/lightroom/kb/photos-appear-black-gray-rectangles.html

  • IPhoto for iOS does not show all Facebook albums

    iPhoto for is not showing all of my Facebook photo albums when I attempt to share photos. I have not been able to recognize any differences between the albums shown or not shown except maybe album age - older albums remain invisible. Quite annoying.
    I have the latest iPad with latest SW and latest iPhoto.

    When I use iPhoto for iOS to share to Facebook I first get a chance to share one photo or select several.
    Then I see a choice to upload to an album, usually Wall Photos, but there in only that one album visible.
    Tap on that album and more choices come up. These include, eventually, all of my albums. I can then choose the album to which I want to upload the photo(s).

Maybe you are looking for

  • Window 8.1 system unable to access network shares via VPN connection

    Is there something inherent to Windows 8.1 that prevents it from accessing shares on a domain? I know that it cannot join a domain, but does that also mean that it cannot access shares which are on a domain? My problem is that I have several user tha

  • While  updating my apps on my iPhone and it keeps showing  one apple id & ask me to enter pwd.

    While  updating my apps on my iphone and it keeps showing  one apple id & ask me to enter pwd. (I think the apple id belongs to the Shopkeeper , he helped to download the apps while am purchasing the phone). I have already updated my apple id from th

  • Save PDF File As dialog box not appearing

    I am running Acrobat 8 Pro on Windows Server 2008. I'm having a problem with the Adobe PDF printer. When I attempt to print a document to this printer, the "Save PDF File As" dialog box does not appear. The dialog box does open, but it is either hidd

  • PC not detecting my Nomad MuVo

    I was pasing a music file and it froze, when I rebooted and tryed to verify if all my music was still in it just didnt detect it and have tryed to use it on other computers and have had no luck. I can still use it for listening to music but I andt co

  • Multi-Threading in Labview (not teststand)

    I have heard that it is possible to write a Labview application using more than one execution thread, but I don't understand what the help files are saying. Do I have to have a HyperThreading CPU to do this? This was easy in CVI. Can more than one th