Photomerge  Adobe Photoshop Elements 7.0 (Editor) has stopped working

When starting photomerge I'm getting the above error message.
I un installed PSE 7.0 and re installed. Same problem.
Any ideas what could cause this problem.
Only change I saw was that Google Chrome was installed.

Hi,
Please try couple of probable solutions as mentioned below:
Solution 1:
1. Close Elements.
2. Launch the Photoshop Elements Welcome Screen and hold down ctrl + alt + shift as you click Editor.
3. Continue to hold the keys until you see a message box asking if you want to delete Photoshop Elements settings file; click Yes. Elements will open with default preferences.
Solution 2: In case any network printer is attached try to launch without network or printer uninstall or make different printer as default.
Solution 3: Try launching with anti-virus off or removing PSE from conflicting list.
Solution 4:
On the drive on which you have installed PSE,on my machine it is on C:
Go  to C:\Program Files\Adobe\Photoshop Elements 6\Locales\<locale>\Plug-Ins\Import-Exportand you will find twain  plug-in. Remove that plug-in from that location and copy it somewhere  else.
Now launch PSE and check if it works.

Similar Messages

  • Adobe Photoshop Elements 6.0 (Editor) has stopped working

    Shows this message and then "A problem caused the program to stop working correctly.  Windows will close the program and notify you if a solution is available."    Haven't heard anything from windows.   Any suggestions?

    Did you tried uninstalling and then installing it again?
    Ankush

  • "Adobe Photoshop Elements 6.0 (Organizer) has stopped working"

    Hardly an original title, or so it would seem from searching this forum and elsewhere, but now this problem has hit me.
    PSE6 has been working fine since I re-installed it on a new computer early this year. I'm running it in compatibility mode in Windows 7 Home Premium 64 bit. I use PSE6 mostly for organising my digital photographs and scans, and occasionally for simple editing. Recently I've been shooting RAW files which I use PSE6 to convert to jpg when I want to export them. The organiser crashed when I was converting and exporting about 100 photographs to a new folder on my hard disc. The RAW files were about 5 MB each and PSE6 got about half way through the batch. Since then, I get the message above every time I try to start PSE6. The only other thing I did was to use PSE6 to create a slide show of the same photographs. I've never done this before, so it's worth mentioning in case it has any bearing.
    I've tried most of the actions suggested in John Ellis' FAQs with the exception of re-installing PSE6 (which doesn't seem to have solved the problem for anyone else) and messing with the registry (which I don't feel competent to do). Can anyone put their finger on the cause of this problem and suggest a solution? My sincere thanks to anyone who can help me to reolve this issue!
    Martyn

      I would suggest using the Editor and try batch processing.
    File à Process Multiple Files
    Select a source folder containing your raw images
    Select a destination folder for your jpegs
    Check the bottom box convert files to and from the drop down menu you get a choice of jpeg quality. Select which one you prefer and click OK.
      

  • Photoshop elements 7.0 (organizer) has stopped working, how do I fix this?

    photoshop elements 7.0 (organizer) has stopped working, How do I fix this?

    Start PSE to get to the Welcome screen.
    Hold down the Ctrl, Alt, and Shift keys and click Organize. Keep holding down the keys until you see the Catalog window.
    Select your catalog and click Repair.  Select “repair anyway” even if PSE doesn’t find problems.
    Then for good measure, click Optimize.
    If repairing resolves your issue then fine else repeat the above steps, but click New to create a new catalog.  If you’re able to import photos into the new catalog and the Organizer works fine, then problem can be old catalog.
    In that case you can try regenerating the thumbnails.  Do Show All, Edit > Select All, and then Edit > Update Thumbnail.
    http://kb.adobe.com/selfservice/viewContent.do?externalId=kb402592&sliceId=2
    -Garry

  • Unable to launch Adobe Premiere Elements 10 - Says AdPrE10 has stopped working

    I downloaded Adobe Premiere Elements and bought a product license via my workplace.
    I was able to install successfully, but when I launch the program, it says Premiere Elements 10 has stopped working. I have not been able to launch the program. I was having the same issues when I was using the trial version. Please help,
    I need to work on editing videos rightaway and it is ridiculous that a program that I have paid money to buy is not even launching to begin with. I can't even imagine the trouble I am going to have trying to use this version.
    Please don't send me thousands of instructions on downloading and installation. I have been able to download and install and added my serial key number. I see the icon on the desktop, It just doesn't launch. See error image.
    Thanks
    VidishaP

    I am not looking for sarcasm.
    Let's address that for a moment.
    I replied to your OP about 8 mins. after it was moved here. Much of that time was gathering the links to those articles, most of which I wrote, and have bookmarked. Each contains several links (one, probably 15 links).
    In ~ 30 mins. you report that there was nothing helpful in any of those articles or the ones linked to, from them. Though I wrote the articles (most anyway), it would have taken me that long to read each article, and just open the links, with almost zero time to do any of the things suggested. Just tracking down error and warning messages in Event Viewer, and following the links in any of those, would have taken at least that long.
    You state that you had the same issues with the trial version.
    I had the same issue when I was trying to use the trial version.
    In the world of troubleshooting, this is a pretty fair indicator that there is something wrong with your computer, or your OS. If nothing else, it indicates that a problem existed before your recent installation of PrE.
    Now I will have to search for return/exchange options since it is not launching by double clicking like every program does.
    Actually, Adobe makes this part very easy. Just return their software, within 30-days of purchase, and you get your money back.
    Sorry that I could not help you,
    Hunt

  • Elements (Editor) has stopped working...

    Hello all,
    I installed Adobe Photoshop Elements 6.0 on my Windows Vista Dell Inspiron 1525 laptop last month and everything worked fine. Then suddenly, when I tried to open it today, the following error shows up:
    Adobe Photoshop Elements 6.0 (Editor) has stopped working.
    I have scanned through the forums and have only noticed people complaining about the 'Organizer' not working. Has anyone seen this error?? Elements does not even start anymore. Right when double-click on the icon, a window pops up with the error above. Anyone have any ideas?? Any help would be greatly appreciated. Thanks...
    Sam

    have you ALSO had trouble with your printer/scanner/other device?
    i had the same problem, not knowing they were related til my friend showed me this:
    http://kb2.adobe.com/cps/408/kb408846.html
    hope it helps you too!

  • My Adobe Photoshop Elements 7.0 (Editor) function has suddenly stopped working. Windows cannot seem to solve the problem. Any anwers

    I receive Adobe updates on a regular basis without any problems. The other day, my Adobe Photoshop Elements 7.0 (Editor) function has suddenly stopped working. Windows cannot seem to solve the problem. I can open all the other function buttons without any problems just not the most important one which is the Editor Function. Has anyone experienced this situation and knows what to do?

    Did you tried uninstalling and then installing it again?
    Ankush

  • Photoshop elements 13 editor has stopped working EVERYTIME i try to use smart detail brus.windows 7 home edition with plent of memeory and speed. any ideas WHY

    photoshop elements 13 editor has stopped working EVERYTIME i try to use smart detail brus.windows 7 home edition with plent of memeory and speed. any ideas WHY

    The faulting module is photoshop. Report below.
    Source
    Adobe Photoshop CC 2014
    Summary
    Stopped working
    Date
    2/2/2015 4:54 PM
    Status
    Report sent
    Description
    Faulting Application Path: C:\Program Files\Adobe\Adobe Photoshop CC 2014\Photoshop.exe
    Problem signature
    Problem Event Name: APPCRASH
    Application Name: Photoshop.exe
    Application Version: 15.2.2.310
    Application Timestamp: 5480338c
    Fault Module Name: Photoshop.exe
    Fault Module Version: 15.2.2.310
    Fault Module Timestamp: 5480338c
    Exception Code: c000001d
    Exception Offset: 00000000049de322
    OS Version: 6.3.9600.2.0.0.768.101
    Locale ID: 1033
    Additional Information 1: 8db4
    Additional Information 2: 8db473619c10c0c8b85ce99afe676ed8
    Additional Information 3: f06d
    Additional Information 4: f06da704bdd5338df2a8d09bde2244bb
    Extra information about the problem
    Bucket ID: 1fe6d1d4e5765bd348843b981b8ec4d2 (85990875000)

  • "Photoshop Elements Editor has stopped working"...message

    I am very very very new to this...and have had so much trouble I'm ready to ask for a refund!  After installing and watching tutorials and not being able to load any pictures to the 'organizer'...(my autoplay does not show the "Organize and Edit Photos" or show the Photo Downloader...I finally called Customer Service.  He told me I needed to uninstal and reinstall.  Ok..I've done that.  But it's still not on Autoplay.  At least he showed me where the file menu is on the 'organizer', so I could get some pictures in there.  But when I click on 'Edit Photos', I get the pop-up message, "Photoshop Elements Editor has stopped working"....It never HAS worked....This thing just came out of the box today and has too many problems for a newby like me.  What is the problem?  Actually, there are the two problems.  HELP!

    On the drive on which you have installed PSE,on my machine it is on C:
    Go  to c:\Program Files\Adobe\Photoshop Elements  9\Locales\<locale>\Plug-Ins\Import-Exportand you will find twain  plug-in. Remove that plug-in from that location and copy it somewhere  else.
    Now launch PSE and check if it works. Let me know if you have any comments.
    Thanks
    Garry

  • Photoshop elements 12 editor has stopped working.

    This is the error message I get.  Photoshop elements 12 editor has stopped working.  A problem caused the program to stop working correctly.  Windows will close the program and notify you if a solution is available.
    The programme opens and then crashes.  I took it all off my computer and then reloaded it again but have the same message.  If anyone can help I would be grateful.@

    Please try couple of probable solutions as mentioned below:
    Solution 1:
    1. Close Elements.
    2. Launch the Photoshop Elements Welcome Screen and hold down ctrl + alt + shift as you click Editor.
    3. Continue to hold the keys until you see a message box asking if you want to delete Photoshop Elements settings file; click Yes. Elements will open with default preferences.
    Solution 2: In case any network printer is attached try to launch without network or printer uninstall or make different printer as default.
    Solution 3: Try launching with anti-virus off or removing PSE from conflicting list.
    Solution 4:
    On the drive on which you have installed PSE,on my machine it is on C:
    Go  to C:\Program Files\Adobe\Photoshop Elements  12\Locales\<locale>\Plug-Ins\Import-Exportand you will find twain  plug-in. Remove that plug-in from that location and copy it somewhere  else.
    Now launch PSE and check if it works.

  • PhotoShop Elements Editor has stopped working

    PhotoShop Elements 12 Editor has stopped working. I have Windows 7

    Hi Chester2013,
    Please Navigate to below location
    C:\Program Files (x86)\Common Files\Adobe
    and rename the SLCache folder to SLCache.old
    Then navigate to C:\ProgramData\Adobe
    Rename the Slstore folder to SLstore.old
    Navigate to C:\Program Files (x86)\Adobe
    and launch Photoshop Elements from there and check.
    Thanks

  • Program won't stay open. Message; "Photoshop Elements 12 editor has stopped working."

    This started happening suddenly a day ago.
    Once I bring a photo into the program a window appears reading, "Photoshop Elements 12 editor has stopped working. A problem caused the program to stop working. Windows will close the program & notify you if a solution is available."
    The program has been working fine up until a day ago.
    Please advise a fix.

    Please try couple of probable solutions as mentioned below:
    Solution 1:
    1. Close Elements.
    2. Launch the Photoshop Elements Welcome Screen and hold down ctrl + alt + shift as you click Editor.
    3. Continue to hold the keys until you see a message box asking if you want to delete Photoshop Elements settings file; click Yes. Elements will open with default preferences.
    Solution 2: In case any network printer is attached try to launch without network or printer uninstall or make different printer as default.
    Solution 3: Try launching with anti-virus off or removing PSE from conflicting list.
    Solution 4:
    On the drive on which you have installed PSE,on my machine it is on C:
    Go  to C:\Program Files\Adobe\Photoshop Elements  12\Locales\<locale>\Plug-Ins\Import-Exportand you will find twain  plug-in. Remove that plug-in from that location and copy it somewhere  else.
    Now launch PSE and check if it works.

  • Photoshops elements 13 trial version not working, Keeps telling the editor has stopped working

    Downloaded & installed PS elements 13. when I try to start it up  a box tells me the editor has stopped working and gives this in problem details:
    Problem Event Name:    APPCRASH
      Application Name:    PhotoshopElementsEditor.exe
      Application Version:    13.0.0.0
      Application Timestamp:    54024871
      Fault Module Name:    libcef.dll
      Fault Module Version:    3.1750.1738.0
      Fault Module Timestamp:    539860dd
      Exception Code:    c000001d
      Exception Offset:    00000000020f3553
      OS Version:    6.1.7600.2.0.0.768.3
      Locale ID:    2057
      Additional Information 1:    1849
      Additional Information 2:    1849c65267ce2967d89f315e1c3c4b82
      Additional Information 3:    4bd2
      Additional Information 4:    4bd2aa1900d8927bd0f22b0bbfeb6f46
    Never used PS before  not sure if I need any other PS programs

    Hi Charles,
    Sorry for the inconvenience caused.
    Please refer to this KB article:
    https://helpx.adobe.com/photoshop-elements/kb/elements-13-crash-windows-7-crt.html
    and see if it helps.
    Thanks,
    Anwesha

  • Adobe Photoshop Elements 6.0 (Editor) Fehlermeldung

    Hallo liebe Leute,
    ich bin neu hier und habe ein Problem.
    Wenn ich Adobe Photoshop Elements 6.0 (Editor) beende, erscheint folgende Fehlermeldung:
    "Adobe Photoshop Elements 6.0 (Editor) funktioniert nicht mehr
    Es wird nach einer Lösung für das Problem gesucht..."
    Diese Meldung verschwindet dann leider nicht mehr und das Notebook stürzt ab...
    Folgendes habe ich bereits versucht:
    - Neuinstallation
    - Kompatibilitätsmodus
    - Diverse Recherchen im Netz (ohne Erfolg)
    Vielleicht kann mir jemand dabei helfen dieses Problem zu lösen.
    Weitere Informationen:
    - Installiert auf Acer Aspire 8930G Notebook
    - Plattform: WindowsVista Home Premium SP2 32Bit
    Vielen Dank.

    Hi,
    Please try couple of probable solutions as mentioned below:
    Solution 1:
    1. Close Elements.
    2. Launch the Photoshop Elements Welcome Screen and hold down ctrl + alt + shift as you click Editor.
    3. Continue to hold the keys until you see a message box asking if you want to delete Photoshop Elements settings file; click Yes. Elements will open with default preferences.
    Solution 2: In case any network printer is attached try to launch without network or printer uninstall or make different printer as default.
    Solution 3: Try launching with anti-virus off or removing PSE from conflicting list.
    Solution 4:
    On the drive on which you have installed PSE,on my machine it is on C:
    Go  to C:\Program Files\Adobe\Photoshop Elements 6\Locales\<locale>\Plug-Ins\Import-Exportand you will find twain  plug-in. Remove that plug-in from that location and copy it somewhere  else.
    Now launch PSE and check if it works.

  • Error message - photoshop elements editor has stopped working

    Hi - I've installed photoshop elements 8 twice, and I still get the error message "photoshop elements editor has stopped working" .  I can't seem to get beyond this point.  My system is Windows Vista.  Any help is appreciated.  Thanks

    I suddenly started getting the same error message and was reaching my wits end in trying to find a solution.
    This may sound bizarre, and you may not have the same situation as I found, but check your system/Windows date setting.
    Somehow, the year on my system had become 2096. I corrected it, and bingo! PSE 8 Editor works again.

Maybe you are looking for

  • Multiple Groups in Radius

    HI all - Quick questions that will be easy for all you experts. I am using Juniper Steel-belted Radius for Remote Access Authenticaion off of our Concentrator right now. I want to start deploying 802.1x for vlan assignment and login authentication fo

  • How can use the select statement  to retriev the data from  a where conditi

    Hi, SELECT KUNNR            NAME1            STRAS            ORT01            PSTLZ            LAND1      FROM  KNA1      INTO TABLE IT_KNA1      FOR ALL ENTRIES IN IT_LIKP      WHERE KUNNR = IT_LIKP-KUNNR AND            KUNNR = IT_LIKP-KUNAG. Here

  • Auto mount SD Flash

    Hi, everybody! Help to solve a problem. On my MBA of all 128Gb disk space. I installed in cards reader flash card on 64Gb. If I close/switch off/discharge battery, after the flash card isn't available, it is necessary to pull out and insert still aga

  • Why can't I save my photo as a JPEG?

    I just finished a project and don't have the option to save it as a Jpeg. Is there a way to fix this? It hasn't happened before.

  • Video shaking in Encore CS 5

    I'm trying to burn my film to DVD via Encore, but it seems no matter what I do, the final result is shaky video (both in Encore's DVD preview and on the actual disc itself if I burn it). It basically looks like the video is constantly shifting ever s