Photos not as clear as in preview.
I'm making a photo movie. When I watch the photos with Ken Burns effect added, the photos are very clear while previewing, but after I hit update, the photo is blurry in the actual movie.
Anybody else experience this?
Intel iMac Mac OS X (10.4.7) I'm a secret agent
Intel iMac Mac OS X (10.4.7)
You're correct: the preview appears to be much sharper, less pixelate, etc.
Someone will correct me if I'm wrong, but as I recall the 'playback' in what you are calling the 'actual movie', isn't really the actual movie you'll get when you Share (export.) It's a it's a sort of preview itself.
Try this: select one of two of the photos in the timeline, choose Share, then Quicktime. This will give you a lot of options, each of which impact the quality (and the file size) of the output. You'll have to experiement to find a setting which is satisfactory to you.
Alternatively, if the 'photo movie' is in effect a slide show, with movement added via Ken Burns, you might find that you're more satisfied doing the project in iPhoto. You won't have quite the control you have in iMovie, but you can add transitions/movement via the KB effect, and even a sound track -- albeit a single tune.
Hope this helps,
Hal
Similar Messages
-
Hi - I downloaded DC Copy to use to transfer some photos from my PC to my I pad. The instructions on U tube by an Apple Tech person were not very clear.
Can someone please give me a step by step procedure to followo to do this. ThanksWelcome to Apple Support Communities
You can install Windows on Boot Camp or a virtual machine > https://discussions.apple.com/docs/DOC-3321
If you decide to use a virtual machine, install Parallels, VMware Fusion or VirtualBox. You can install the Windows version you want.
If you decide to use Boot Camp, you can install a 64-bit Windows 7 or 8. In both cases, you have to use a System Builder or full Windows 7 or 8 version, which you can buy at Amazon or NewEgg. You will need an external disc drive.
There's no risk in installing Windows on a virtual machine, as it's installed on a virtual hard drive. If you install Windows on Boot Camp, follow Apple's steps to install it > http://manuals.info.apple.com/en_US/boot_camp_install-setup_10.8.pdf -
Photo clicked with flash does not give clear image
photo clicked with flash does not give clear image
I did some more testing with this, and it appears to be a Gmail problem with iOS iPhoto.
I called Apple support, and this issue was escalated to engeneering.
When sending photos from iPhoto for iOS via Gmail from the iOS device, only the small and medium sized photos can be opened in Mail on the iOS device. The large and original photos do not open in Mail.
This occured across different devices I tested, including iPad 2, 3, and 2 separate iPhone 4S devices. All were updated to the lastest firmware. iPhoto was uninstalled, and reinstalled.
When sending and receiving photos from iPhoto for iOS via iCloud me.com email servers, all the photos of different sizes could be opened in Mail fine on the iOS devices.
It appears that Gmail servers somehow change the way the photos are encoded, and make them not viewable on the iOS device. Very disappointing, since the native Mail program has no problem, and photos sent via gmail or other are fine.
Another iPhoto for iOS glitch! -
Hi,
I'm running a blog where I use a photo on top of every new entry. These photos always show up in the preview on the first page (showing the latest five blog entries) but by mistake I've done something to two of the entries that made this preview disappear. I've tried to recreate them, but it doesn't help. If I go to the entry itself, the photo is there OK, but not on the firs page's preview.
Pls see here: http://web.me.com/mans/langert/QAJAQ/QAJAQ.html
Entries 40 and 41 should have preview photos, but doesn't (42 has no photo in it).
What could be wrong here?
Thanks...
/MansMans Langert1 wrote:
I did copy and paste an image placeholder from another post, and then droped the photo onto it. This didn't help I'm afraid...
Mans ~ It has to be the original placeholder — not one copied from another post. ...Unless someone else comes up with an idea, I think you'll have to recreate 40 & 41 anew — copying & pasting the original text and dragging in the photos to the new entries. Then delete 40 & 41. -
Leopard Preview Photos not sharp at screen size
I notice that when you double click a photo in Leopard, the image in Preview is not always sharp. If you expand the image to 100%, then it is sharp.
It was never like this in Tiger.
The image is not being re-sampled correctly to fit the screen.
If you open the same image in IPhoto, then it is sharp at screen size.Everybody, report preview problems to apple at:
http://www.apple.com/feedback/macosx.html
My biggest problem in preview 4.0 is it freezes while trying to view large images across four apple LCD's. Sometimes I see a gray screen. -
I am using an HP PSC 2355 printer - and have not had trouble printing before. The 8 x 10 photo does not print like the print preview does - everything elarges when the actual print completes, which truncates all details that need to be printed. Is ther a setting that I should be choosing?
There is no O or L in my Serial Number, and it starts with one single D, then a set of 3 numbers, 3 letters, 4 times, then 3 letters closing it down. When I check my Final Cut's serial number in the help section of the software, I get the same number. Yet, when I enter it in the site, it says, I have an invalid serial number. So I will call Apple Care. I hope I will be able to talk to a representative in an hour or so. It always takes so long that I grow beard while I wait.
-
Lr 5.6 error message that reading preview cache failed and will correct when reopened; does not correct on reopening; removing preview.lrdata files allows LR to open but photos not shown; what action should I take next?
Yikesyou have helped me before and I thank you for that. Funny how at the last resort I ask a question and then an hour later I fix something that has been broken for five days. I got off on the wrong foot with Lightroom installation and I really stepped in it...a lot had to do with a bad hard drive and all that. I still have remnants of catalogues etc so I am never quite sure where I am. I ran a search and found more than one .lrdata files. I finally got the right one to delete and I think I am okI'll be crying to you again if I am wrongall best, thanks again for your helpjim sterne
-
Photos not syncing after update to photo app
photos not uploading to photo app after update, I have over 10,000 photos that are trying to upload and the last import says 2013 instead of last week. I have a MacBook pro and my icloud sharing is on and I purchased more space so that is not the problem
i can sync movies, music, podcasts and tv shows just fine, but whenever i try to sync photos, then i am getting the exclamation mark and nothing - not even the movies and tv shows that worked before - get synched anymore.
This seems contradictory, I'm not clear whether music, movies etc work for you or not.
In regard to the photos, make sure iphoto sharing is enabled and not blocked by your firewall, you could try creating a new photo library in the same location but with a different name to your existing library to avoid overwriting it, to see if it's a photo library issue or something else. -
Photos not displaying in Album
Hi, I am unable to view photos I have taken since 28th June. I have cleared the data and the cache for the album app and restarted my phone several times but am still unable to view the photos and just have a black thumbnail for each photo. Please help as there are photos of my children which are irreplaceable.
i too have the added problem of photos not being viewed or being shared etc.. ever since the newest android update.. i have a 128gb memory card in my z3 so i thought it was just that, cos its very large, so i replaced it with a new 64gb micro card. but it too is now doing same thing... please help as this is really annoying now. and i do not want to format any more of my photos.. my phone isuk issueandroid version 5.0.2build no 23.1.A.1.28
-
I have just purchased the new iPad with the camera connection kit. I just want to be able insert my SD card into the Pad and view my photos, not import them.Can this be done and how? Please advise. Thank you.
See this article: iPad: Using the iPad Camera Connection Kit
No, this canot be done, afaik. When your camera or card is connected, you will see the thumbnails in the camera pane, but not full size preview. So to browse your photos on the iPad you will need to import them to your camera roll. But you need not delete them from the camera or card after importing, so you might simply import selected photos to your camera roll from the camera grid and then delete them again from the camera roll after importing and browsing, without removing them from the card/camera.
Regards
Léonie -
Please help - Photos not saving
I would appreciate some help here-
the photos I take, screenshot, and try to save will not save to my camera roll. I can take, screenshot, and press the save button, but they won't save to the camera roll! I didn't update lately, (iPad is up to date), it just randomly occurred. I thought maybe since my storage was almost full, that might be the problem. So I deleted plenty of photos that I did not need, clearing up tons of space, but it hasn't helped. I tried the "Restrictions method" I've read about, but it didn't do anything. I'm unsure what to do. If you could help in any way, that'd be great!
Thank you.Hi If you have just done a Factory Resore you need to Download Apps & photos from ICLOUD over your wifi Plug into charger before doing this. This may take upto 2 hours if you have a lot of photos. Cheers Brian
-
How can I make MUSE upload one png that it overlooks? Cache cleared & shows in Preview
MUSE uploads everything to BC except an inport png. I cleared the cache, it shows inPreview, no conflicts noted in Assets and the Browser reflects any other changes I make to the page. The space for the image is missing online and the entire page moves up to fill the space
Thanks for getting back. I had a deadline so I gave-up trying to make that (great) extracted image work and deleted it from my system -frustration. For what its worth, MUSE displayed the png in Design/ Preview/ Plan & provided an empty space for it when published. Besides this quirk, MUSE has been a great.
Date: Mon, 27 Aug 2012 10:49:07 -0600
From: [email protected]
To: [email protected]
Subject: How can I make MUSE upload one png that it overlooks? Cache cleared & shows in Preview
Re: How can I make MUSE upload one png that it overlooks? Cache cleared & shows in Preview
created by adobelance in Help with using Adobe Muse - View the full discussion
Could you share your URL so we can take a look at your site?
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4651358#4651358
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4651358#4651358. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Help with using Adobe Muse by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746. -
Large files not displaying clearly
I have just stitched some photos and the resulting files do not display clearly outside of CS4. They were files - up to 800MB I have then resized them and put them on the web and found the files resized from the larger files do not give a good resolution on the screen. I have tried saving them up to 150 ppi instead of 75 but still get the same result. The original large file has incredible resolution when zooming in with CS4. But terrible when trying to resize put it on the web. For an example check out the gallery. http://gallery.me.com/suethomo#100207&bgcolor=white
The stitched ones are Thomo_1. Thomo_2 Thomo_3 Thomo_4. The sharpest ones are taken with a point and shoot! The stitched pics are with Canon 5D Mk!! and processed from RAW I have sharpened them in CS4 and they look good until I view them in Bridge or elsewhere. Not sure where I am going wrong.
Any suggestions welcomeA couple of things come to mind...
I noticed that your web gallery scales the images according to the viewer's browser window size. Shrink the browser window and the image shrinks. Enlarge the browser window and the image enlarges. I would suspect that scaling the image beyond the actual image size would cause pixelation and possible aliasing.
I would also check that you are sizing your images properly for online viewing. The resolution should likely be 72 ppi at a suitable viewing size. I would also ensure that you are using 'Bicubic Sharper' when scaling images down in PS. -
Slideshow: why do certain photos not show?
slideshow: why do certain photos not show; they are properly referenced
Let me expand on this: I have 570 photos in a slide show and all are properly referenced in my library. In the slideshow window, I can see all the pics in the bottom box and when I run "preview slideshow", certain pictures don't appear in the top box whilst the curser moves across the picture in the bottom box. Likewise, if I run the full screen slideshow, that picture(s) does not appear (I have a blank screen); the next picture does show up, howerver... This happens with several dozen pictures, always the same, randomnley amongst the 570...Hello Tony and thank you. I regenerated and rebuilt thumbnails; I deleted the slide show and rebuilt it; nothing works. Now, I noticed something weird. All pictures are in an Aperture project and are properly referenced as I said; all the pictures in this project come from a old iPhoto project where some of the pictures are in a "Modified" folder, others in an "Original" project; it is all the pictures in the "Original" project that don't show up in the slide show.... Do you have any idea what I should do?
-
Photos not sharp in photoshop express
When I view photos on my Adnoir device using the built in gallery app the photos are very clear and sharp. When I view them in Phtoshop Express however, they are much softer, almost blurry. Why is this?
Thanks for posting your observations here. You are correct, images viewed in Photoshop Express on Android devices can appear less sharp than when viewed in Gallery. There are reasons for this: performance and available memory. In order to display the image quicker, we are displaying a lower resolution version of the image. This does not effect the actual image though, so if you export the image it will maintain the expected resolution.
We hope to make improvements in this area and are investigating how to optimize this for our next update.
Maybe you are looking for
-
Creating an ajustable 3d shape (without using any plugins, Away 3D etc).
I followed this youtube video: http://www.youtube.com/watch?feature=endscreen&NR=1&v=PfR9n0eZJvs And I created a 3D cube in flash using the 3D rotation tool and registration points. I know it isnt truely 3D it more like 2.5D. I have the finish item a
-
My iPhone3GS has started crashing. I'll be mid-phone call, or using an app, when the screen will go dark. I'll have to do a restart. It dumps to the warning screen that there's no power and needs to be plugged in. Once I connect the phone to a power
-
Hi, i am facing this problem in OBIEE 11.1.1.6 BP1. 1) Where I have created a new Geo map using the Mapbuilder. 2) the same is shown correctly in IE. 3) But when accessed through iPad obiee mobile HD app then the conditional formatting (Colour fillin
-
I upgraded our CAM/CAS servers from 4.8.2 to 4.9.0 this weekend
I upgrade the servers from 4.8.2 to 4.9.0 this weekend and all of the servers now crash when introduced to user traffic. The upgrade shows no errors and I have not had a problem in the past the servers are 3355s. Has anyone else upgraded to 4.9.0?
-
StuckThreadMaxTIme in weblogic
I need to know, why the 'StuckThreadMaxTime' exception is coming in weblogic. This is bringing down our server along with the applications deployed on it. The ORACLE and weblogic version we are using is Oracle 9.2.0.4.0 Weblogic 7.0 SP4. The applicat