Photoshop 7.0.1 updater cannot find Photoshop file

If you run the Photoshop 7.0.1 updater and it says it cannot find the Photoshop file(s):
1) Do a full uninstall and reinstall of Photoshop to fix any necessary components that may have been moved or deleted.
2) If that doesn't work, please call Adobe Customer Support at 1-800-492-3623 within the United States, or your local Adobe Customer Support office outside the United States. Please have your Photoshop 7 serial number and valid proof of purchase available when you call. Most likely your serial number has been used by a pirate and disabled.
For other installation problems, please try the instructions included in the updater README document.

If something funny happens when you run the updater (like a DIFFERENT installer runs), try this:
1. Delete all the files in your user / system temp folder, at this location. (USERID is your user login name, Administrator, guest, etc... )
C:\Documents and Settings\USERID\Local Settings\Temp
Local Settings is normally hidden, so make sure to show your hidden folders.
2. Run the Photoshop updater again, and you should be good to go!

Similar Messages

  • Cannot find Photoshop CS6 even though updater informs me it is up-to-date.  OX S 10.9.1.

    Cannot find Photoshop CS6 even though updater informs me it is up-to-date.  OX S 10.9.1.
    I go to updater and it says that it is up-to-date, even though I have uninstalled it.  When I try to reinstall, the download button is available, I click it, which takes me to the updater screen, and informs me that it is up to date, even though it is not in my application folder.  I have ben able to download Lightroom with success, but not Photoshop and other previously downloaded apps.

    Chin Chin please see CC desktop lists applications as "Up to Date" when not installed - http://helpx.adobe.com/creative-cloud/kb/aam-lists-removed-apps-date.html for information on how to resolve your current difficulties.

  • Installed Photoshop Elements 10 Program will not start when click on Icon cannot find exe file

    I had a trial version which uninstalled I have purchase copy of Photoshop Elements 10 and installed on my computer which is running windows 7 the set up stated it had finished the setup. When you click on the Icon a message comes up saying it cannot find Photoshop Elements 10.0 exe

    Go To the below locations and run the exe files manually and check if you ae able to launch the applications.
    C:\\Prog Files\Adobe\Photoshop Elements 10 and run PhotoshopElementseditor.exe
    C:\\Prog Files\Adobe\Elements10 Organizer/PhotoshopElementsOrganizer.exe
    In case you are still not able to find the exe files on the above locations, re-install PSE 10 again as it might not have been installed.

  • Cannot find Photoshop Elements 11.0,exe

    I made a mistake by deleting Photoshop Elements 11. I did it not the proper way. Then I tried to instal Photoshop Element over and over again but after installing I cannot open the Welcome screen because a pop up screen appears: I cannot find Photoshop Elements 11.0.exe.
    However I can start the program by using 'Photoshop Elements Editor' but when started the program I cannot use 'Organizer'!

    Today I solved the problem.
    1. Every time I removed Photoshop Elements 11.0. I used Revo Uninstaller. After cleaning with Ccleaner and restart the pc I installed Photoshop Elements again. And the samen procedure again (4 times).
    2. This time I used Windows 7 software to remove Photoshop Elements 11.0. And Premiere Elements 11.0 as well. (I use Premiere Elements 12.0).
    3. Cleaning with Ccleaner, restart pc and reinstal Photoshop Elements 11.0.
    4. All necessary files are installed now and PE11.0 works!
    Thanks for trying helping me out.
    Best wishes, Cees

  • Cannot find photoshop elements 8 to start download. what next

    cannot find photoshop elements 8 to start download. what next
    my serial says it does;t work with Version 9… so it must be for version 8, which I cannot locate to download.
    what do I do now ????

    You can download the trial version of the software thru the page linked below and then use your current serial number to activate it.
    Be sure to follow the steps outlined in the Note: Very Important Instructions section on the download pages at this site and have cookies enabled in your browser or else the download will not work properly.
    Photoshop/Premiere Elements 8: http://prodesigntools.com/direct-download-links-for-lightroom-3-and-photoshop-elements-8.h tml
    As far as version 9 goes, if you never purchased it you shouldn't expect to be able to use it.  If you check your Adobe account online you might be able to find whatever version you purchased identified there.

  • Software update cannot find installed App's  in sub-folder

    Hi All,
    I have same kind of problem - I created folder called "iLife' 11" and moved there all App's which belong to this package. As soon as I did this Software Update cannot find anything. For example Apple released iPhoto' 11 (9.1.1) update and Software Update did not find it until I moved it back to "Applications".
    BTW I have same problem with Adobe App's. Adobe update did not see Photoshop which has been moved to sub-folder.
    My question is DO I have any chance to put App's to sub-folder and get them automatically updated by Software update? IF so, what should I do?

    All sub-folders located in /Applications/ not in /Users/username/Applications. Actually /Users/username/Applications/ is empty on my mac.
    What I trying to have is sub-folder (for example called Photo where I will have all applications for working with images (Photoshop, Nikon Scan, SilverFast and so on) in one locations or iLife' 11.
    I took this idea from folder "Utilities" I can put App there and it worked and updated without any problems.
    As far as I understand this problem (from Unix point of view) is a PATH problems. Software Update cannot find App in the folder which not listed in PATH.
    If I create link (allies) for application in /Applications/ folder it will updated.

  • Where can i find the build 10041 as windows update cannot find it?

    Hi all. I have an Acer Aspire E1-531 and am running Windows 10 Technical Preview on a 64-bit system. I am stuck on build 9926 and on the fast option for downloads in Windows Update yet I have not been offered the build 10041. Or that Windows Update cannot
    find build 10041. Where can I go to download and install the build myself? Thank you in advance.

    Hi,
    If you need
    Additional Languages for Windows 10 build 10041 - ESD - ISO
    http://answers.microsoft.com/en-us/insider/forum/insider_wintp-insider_install/additional-languages-for-windows-10-build-10041/c26555a2-6e0e-415b-b47b-0c46e60f7f06
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • TFS 2013 Update 4:Could not load file or assembly 'LibGit2Sharp, Version=0.13.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35' or one of its dependencies. The system cannot find the file specified.

    Issue: We have upgraded TFS 2013 App Server and Build Servers  from TFS 2013 RTM to TFS 2013 update 4. Everything looks good but we are receiving the below error:
    Could not load file or assembly 'LibGit2Sharp, Version=0.13.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35' or one of its dependencies. The system cannot find the file specified.
    Kindly share your thoughts/inputs to resolve the issue

    Hi John,
    Hope there is nothing wrong with the update.
    Yesterday, Our developers were troubleshooting the issue with the builds and found that
    Build Activities dll has the reference of LibGit2Sharp.dll
    version 01.12.0.3051.0.  After TFS upgrade, Build activities does not have a reference for the new version of
    LibGit2Sharp.dll [required] which has caused the issue in the build process.
    Error: Could not load file or assembly 'LibGit2Sharp, Version=0.13.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35' or one of its dependencies. The system cannot find the file specified.
    Resolution: New version of LibGit2Sharp.dll
    was added and referenced to Microsoft.TeamFoundation.Build.Activities.dll
    which has resolved the issue with the builds.
    I think this should be referenced somewhere regarding TFS Update 4 so that everyone will be able to spot the issue and fix the issue without any issues.

  • Since updating to the latest version of iTunes (11) I cannot find the files that I need to export from apps on my iPhone to my Desktop PC

    Since updating to the latest version of iTunes (11) I cannot find the files that I need to export from apps on my iPhone to my Desktop PC

    Follow these instructions to completely remove Apple software
    http://support.apple.com/kb/HT1923
    Then use free Ccleaner to repeatly repair your registry until it's fixed.
    http://www.piriform.com/ccleaner/download/standard
    download iTunes again from Apple.
    Your content will remain.

  • On every URL link in Microsoft Outlook I get the message that "The system cannot find the file specified." Then it proceeds to open it AFTER I close the error message. I just updated Firefox a few days ago and it began then and continues.

    It shouldn't take any more detail than this. This is what happens every time:
    "Generald failure: The URL was 'http: //link.washingtonpost.com/r.....' The file system cannot find the file specified."
    '''EVERY URL'''

    See:
    * http://kb.mozillazine.org/Windows_error_opening_Internet_shortcut_or_local_HTML_file_-_Firefox

  • Error message on my development workstation: The system cannot find the file specified.

    Post Author: cseverin
    CA Forum: Crystal Reports
    Hi,
    I am currently developing an ASP.NET website using Visual Studio.NET 2005. I am using the .NET 2.0 framework, VB.NET as my programming language and I connect successfully to a SQL Server 2005 database.  I can select, insert, update and delete data from the database elsewhere in my project, so I know basic connectivity isn't an issue.  The problem seems to be with Crystal Reports. 
    I created a folder called 'Reports' in my project and added a Crystal Report file (OpenFiles.rpt) to it.  I designed the report and initally used a hard-coded SQL query as its datasource so I could quickly get the database fields onto the report and preview them.  All worked fine. 
    To make the report accessible to the rest of the website, I created an .xsd dataset file containing the three tables (and their corresponding tableadapters) that the report requires and then redeveloped the report using the dataset as the datasource for the report.  After doing this, the preview no longer worked.
    Next, I added a page to the website and dragged a Crystal Report Viewer Control onto it.  In the code behind the page I wrote:
    Option Strict On
    Imports System.Data
    Imports CrystalDecisions.CrystalReports.Engine
    Imports CrystalDecisions.Shared
    Partial Class Reports
         Inherits System.Web.UI.Page
         Private objOpenFilesreport As OpenFilesReport
         Private rptOpenFiles As ReportDocument
         Private strLastErrorMessage As String = Nothing
         Private errLastException As Exception = Nothing
         Dim strFileKey As String
         Dim strJurisdictionCode As String
         Dim strStaffId As String
         Dim strReportId As String
         Private Sub ConfigureCrystalReports()
              Dim reportPath As String = Server.MapPath("OpenFiles.rpt")
              Dim rptopenfiles As New ReportDocument
              rptOpenFiles.Load(reportPath)  <== I checked this during execution and the value correctly points to the OpenFiles.rpt file in the Reports     folder of my project
              Dim ConnectionInfo As ConnectionInfo = New ConnectionInfo()
              ConnectionInfo.DatabaseName = my database
              ConnectionInfo.UserID = login id of user
              ConnectionInfo.Password = user's password
              SetDBLogonForReport(ConnectionInfo, rptopenfiles)
              CrystalReportViewer1.ReportSource = rptopenfiles
         End Sub
         Protected Sub Page_Init(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Init
             ConfigureCrystalReports()
         End Sub
         Private Sub SetDBLogonForReport(ByVal ConnectionInfo As ConnectionInfo, ByVal myReportDocument As ReportDocument)
              Dim myTables As Tables = myReportDocument.Database.Tables
              For Each myTable As CrystalDecisions.CrystalReports.Engine.Table In myTables
                   Dim myTableLogonInfo As TableLogOnInfo = myTable.LogOnInfo
                   myTableLogonInfo.ConnectionInfo = ConnectionInfo
                   myTable.ApplyLogOnInfo(myTableLogonInfo)
              Next
         End Sub
    End Class
    I added a hyperlink to one of the existing pages on the website to navigate to this page with the report viewer on it.  When I run the website in Visual Studio and click on the hyperlink I get the following:
    Server Error in '/MyTest' Application.
    The system cannot find the file specified.
    Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.Runtime.InteropServices.COMException: The system cannot find the file specified.Source Error:
    An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below. Stack Trace:
    &#91;COMException (0x80004005): The system cannot find the file specified.
    &#93;
       CrystalDecisions.ReportAppServer.ClientDoc.ReportClientDocumentClass.Open(Object& DocumentPath, Int32 Options) +0
       CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.Open(Object& DocumentPath, Int32 Options) +126
       CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.EnsureDocumentIsOpened() +442
    &#91;Exception: Load report failed.&#93;
       CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.EnsureDocumentIsOpened() +513
       CrystalDecisions.CrystalReports.Engine.ReportDocument.Load(String filename, OpenReportMethod openMethod, Int16 parentJob) +1378
       CrystalDecisions.CrystalReports.Engine.ReportDocument.EnsureLoadReport() +149
       CrystalDecisions.CrystalReports.Engine.ReportDocument.get_DataDefinition() +85
       CrystalDecisions.CrystalReports.Engine.ReportDocument.get_ParameterFields() +158
       CrystalDecisions.Web.CrystalReportSource.BindControlParameter(Parameter parameter) +130
       CrystalDecisions.Web.CrystalReportSource.DataBindParameters() +191
       CrystalDecisions.Web.CrystalReportSource.EnsureParameters(Boolean forceDataBind) +90
       CrystalDecisions.Web.CrystalReportSource.LoadCompleteEventHandler(Object sender, EventArgs e) +47
       System.Web.UI.Page.OnLoadComplete(EventArgs e) +96
       System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +4086
    Version Information: Microsoft .NET Framework Version:2.0.50727.832; ASP.NET Version:2.0.50727.832 
    Any ideas, anyone?
    Also, assuming I can get past this error, I will need to figure out how to fill the tables in the .xsd dataset file.  I have written a class for the dataset that includes functions that populate the tables in the dataset from the database by executing SQL queries.  But how do I call these functions at the time the report is run?
    This is my first Crystal report written in .NET and I've been struggling with it for days now.  Any help would be most appreciated!
    Thanks very much!
    Chris Severin

    hello, the error message is obviously coming from one of the installed mcafee extensions. please directly contact mcafee technical support - they can likely give you more detailed guidance and are the only ones who can fix bugs or make necessary adjustments in the addon.

  • Photosmart C4780 install fails at "system cannot find specified file"

    My problem started simply with the printer, an HP Photosmart C4780 which has always had a wireless connection and would not print.  At first, the network connection checked out fine from the printer control panel.  I ran a Microsoft printer troubleshooter, which found a block in the print queue, and cleared it.  The first test page would not print, but the "inner test page" did print.  I didn't understand whatever that meant, so I looked for help from the HP site.
    I ran the HP Print and Scan Doctor, and it suggested I reinstall the driver.  I downloaded and saved the current one from HP (PS_AIO_06_C4700_USW_Full_Win_enu_140_175.exe) and then uninstalled the existing driver.  When I attempted to install the new one, a window popped up saying, "The system cannot find the specified file," with only one box to click which said simply "OK".  The installation went through to "review installation options", after which came “checking updates, downloading updates, installing updates” and then it was while “checking system” that the “cannot find the file” window popped up, and when I clicked “OK”, the installation window as well as the error message box, just disappeared.  What I assume was the file path was in the frame of the window, but the whole thing didn't fit so it didn't show the end.  What I could read was “C:\Users\ … \Local\Temp\7zS588E\Setup\.\Setup\hpzpnp40 …
    I found one topic on the same problem for the same model printer in the forum, which offered this fix:
    You will need to first complete a level 3 uninstall of the software. I have included the steps below for this.
    1. Press the Windows key, and the letter R
    2. Type %temp%, and click OK
    3. Open the 7z folder (most recent one if there are multiples)
    4. Open the util folder
    5. Open the ccc folder
    6. Double click on the Uninstall_L3
    Once the Uninstall_L3 has completed, please delete all items listed in the temp folder. Note, you will  not be able to to delete all items, please skip the ones that you cannot. Next please empty the trash, and perform a clean boot. I have included the document 'How to perform a clean boot in Windows'. If your computer does not request it, please restart your computer.
    Once your computer is back up, you will need to reinstall the printers software. You can either do this by using the Installation CD, or downloading the software.
    I did what was suggested, until it got to the point where it said it did not recommend removing any further items if I intended on using the HP Officejet printer (yes I have a second HP printer attached to the network) anytime in the future.  Not really understanding how this all works, I decided to stop what I was doing, so unfortunately it did not solve my problem.
    Do I need to uninstall both HP printers before I can reinstall one?  And if I do that, is there any reason I would not be able to reinstall both printers?  Sounds like I'm asking for trouble.  Bottom line... I still cannot install the driver.
    I have tried to install both the full and basic versions of the driver and always get the same result.
    I have an HP Pavilion dv6-3100t notebook, running Windows 7 Home Premium, version 6.1.7601 service pack 1, 64 bit.  I haven't installed any new hardware or software.  This printer has always had a wireless connection.  The router I use is a Netgear 54 Mbps WGR614 v6 (supplied by my cable company), and the network includes not only my notebook and the Photosmart printer, but also an ASUS desktop, another HP printer, an Officejet 6300 series (used only for printing graphics and photos with a wired connection to the router), and a Vizio smart-TV.  I use Norton 360 Premier Edition and disabled the anti-virus auto-protect when I downloaded and attempted to install the driver.
    Please help!  And thanks in advance for your time and attention.
    This question was solved.
    View Solution.

    Hi wakey-wakey,
    I would recommend accessing your Temp folders, rename a Temp folder to 7zS588E and run the installation from that folder. 
    Please keep me posted.
    Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
    Jamieson
    I work on behalf of HP
    "Remember, I'm pulling for you, we're all in this together!" - Red Green.

  • RSAT won't install on Windows 8.1 Pro - "The system cannot find the file specified."

    Please help. RSAT won't install on Windows 8.1 Pro. Every time I try, I get the same error - "The system cannot find the file specified.". I really don't want to have to refresh the PC to get it working! I've installed the update successfully on
    a fresh win 8.1 enterprise install on a Hyper-V VM.
    I am in uk, so have installed the en-US language pack first. I did have a windows component store corruption but I've managed to fix that.
    event log says:
    Windows update "Update for Windows (KB2693643)" could not be installed because of error 2147942402 "The system cannot find the file specified." (Command line: ""C:\Windows\system32\wusa.exe"
    "C:\RSAT Windows8.1-KB2693643-x64.msu" ")
    CBS log (C:\Windows\Logs\CBS\CBS.log): http://1drv.ms/19CAv14

    As Roger Lu reported, the log indicates that there is corruption in the update files that you downloaded. The log actually reports “file not found”, so you may also want to check permissions on the extracted files in C:\Windows\SoftwareDistribution\Download\76ecaa86ec6712300c2d71cbcdad378c\.
    You can also re-try downloading the files to see if your original download was just corrupt.
    Bruce Wooding Windows Outreach Team- IT Pro Windows for IT Pros on TechNet
    It was a permissions issue! Thanks so much Bruce!
    I checked the permissions for the folder mentioned above and TrustedInstaller only had List Folder Contents and Special Permissions. So I granted granted Read & Execute to TrustedInstaller and tried installing again...
    1) double clicked the installer.
    2) once it said Initialisation was complete, I checked the permissions again and it had re-set them to as before, so I granted Read & Execute to TrustedInstaller again
    3) Installation was successful.
    Not really sure why this happened as it doesn't make sense but it's working now :-)

  • My ipad quit backing up and it cannot find the file.  I tried putting on another computer after a hard reset but it says it cannot back up there either.

    My ipad quit backing up because it cannot find the file.  I have tried a restore and hard reset and adding itunes to another computer and putting it on there but it still will cannot add the ipad to the new computer and back up.  I have an iPad (not iPad 2) and 5.01 OS.  It appears that my iPad is not fully fuctional since I updated to the new OS which is when my ipad stopped backing up.  I lost data too and some apps don't work anymore.

    Have you previously synced photos to the iPad, as that occasionally causes the 'missing file' error. If so then try deleting the photo cache from your computer and then re-try backing up - the location of the cache, and how to delete it, is on this page http://support.apple.com/kb/TS1314.
    In terms of apps not working, if it's happening on all the apps that you've downloaded from the App Store, but not the Apple built-in ones, then try downloading any free app from the store (as that appears to reset something) and then re-try them - the free app can then be deleted.
    If it's happening on all apps then try closing them all completely and then see if they work when you re-open them : from the home screen (i.e.not with any app 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of each app to close them, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
    If that doesn't work then you could try a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

  • Unable to open the physical file "D:\Program Files\Microsoft SQL Server\MSSQL11.MSSQLSERVER\MSSQL\DATA\abc.mdf". Operating system error 2: "2(The system cannot find the file specified.)".

    hi,
    am running the below command for moving sql serevr mdf and ldf files  from one  drive to another : c  drive to d drive:
    but am getting the below error
    SQL Server\MSSQL11.MSSQLSERVER\MSSQL\DATA\abc.mdf". Operating system error 2: "2(The system cannot find the file specified.)".
    use master
    DECLARE @DBName nvarchar(50)
    SET @DBName = 'CMP_143'
    DECLARE @RC int
    EXEC @RC = sp_detach_db @DBName
    DECLARE @NewPath nvarchar(1000)
    --SET @NewPath = 'E:\Data\Microsoft SQL Server\Data\';
    SET @NewPath = 'D:\Program Files\Microsoft SQL Server\MSSQL11.MSSQLSERVER\MSSQL\DATA\';
    DECLARE @OldPath nvarchar(1000)
    SET @OldPath = 'C:\Program Files\Microsoft SQL Server\MSSQL11.MSSQLSERVER\MSSQL\';
    DECLARE @DBFileName nvarchar(100)
    SET @DBFileName = @DBName + '.mdf';
    DECLARE @LogFileName nvarchar(100)
    SET @LogFileName = @DBName + '_log.ldf';
    DECLARE @SRCData nvarchar(1000)
    SET @SRCData = @OldPath + @DBFileName;
    DECLARE @SRCLog nvarchar(1000)
    SET @SRCLog = @OldPath + @LogFileName;
    DECLARE @DESTData nvarchar(1000)
    SET @DESTData = @NewPath + @DBFileName;
    DECLARE @DESTLog nvarchar(1000)
    SET @DESTLog = @NewPath + @LogFileName;
    DECLARE @FILEPATH nvarchar(1000);
    DECLARE @LOGPATH nvarchar(1000);
    SET @FILEPATH = N'xcopy /Y "' + @SRCData + N'" "' + @NewPath + '"';
    SET @LOGPATH = N'xcopy /Y "' + @SRCLog + N'" "' + @NewPath + '"';
    exec xp_cmdshell @FILEPATH;
    exec xp_cmdshell @LOGPATH;
    EXEC @RC = sp_attach_db @DBName, @DESTData, @DESTLog
    go
    can anyone pls help how to set the db offline. currently  i  stopped the sql server services from services.msc and started the  sql server agent.
    should i stop both services for moving from one drive to another?
    note: I tried teh below solution but this didint work:
    ALTER DATABASE <DBName> SET OFFLINE WITH ROLLBACK IMMEDIATE
    Update:
    now am getting the message :
    Msg 15010, Level 16, State 1, Procedure sp_detach_db, Line 40
    The database 'CMP_143' does not exist. Supply a valid database name. To see available databases, use sys.databases.
    (3 row(s) affected)
    (3 row(s) affected)
    Msg 5120, Level 16, State 101, Line 1
    Unable to open the physical file "D:\Program Files\Microsoft SQL Server\MSSQL11.MSSQLSERVER\MSSQL\DATA\CMP_143.mdf". Operating system error 2: "2(The system cannot find the file specified.)".

    First you should have checked the database mdf/ldf name and location by using the command
    Use CMP_143
    Go
    Sp_helpfile
    Looks like your database CMP_143 was successfully detached but mdf/ldf location or name was different that is why it did not get copied to target location.
    Database is already detached that’s why db offline failed
    Msg 15010, Level 16, State 1, Procedure sp_detach_db, Line 40
    The database 'CMP_143' does not exist. Supply a valid database name. To see available databases, use sys.databases.
    EXEC @RC = sp_attach_db @DBName, @DESTData, @DESTLog
    Attached step is failing as there is no mdf file
    Msg 5120, Level 16, State 101, Line 1
    Unable to open the physical file "D:\Program Files\Microsoft SQL Server\MSSQL11.MSSQLSERVER\MSSQL\DATA\CMP_143.mdf". Operating system error 2: "2(The system cannot find the file specified.)"
    Solution:
    Search for the physical files(mdf/ldf) in the OS and copy to target location and the re-run sp_attach_db with right location and name of mdf/ldf.

Maybe you are looking for