Photoshop 7

I cannot open Photoshop 7 on my new MacBook Pro, OS X 10.5.5.
I get an error stating that files are missing in the Adobe Application Support folder and that I must custom install the "Mac OS 9 to Mac OS X Tune-Up".
What is this?
Can Photoshop 7 be installed on this computer?
I really like the 7 version for it's simplicity and would like to continue using it.

There may still be a few CS3 Upgrades in the Retail channels such as Amazon.com but you had better be quick because I suspect that there will be a run on them and they will go fast.
Install a CS3 Upgrade now and if CS4 ships within 30 days and if the same rules that applied to previous releases still apply this time you may be able to apply for a free upgrade to CS4.
But if you are still using PS7, you have no time to lose.

Similar Messages

Error in starting Adobe Bridge in Photoshop CS2

I've just installed Photoshop CS2, however upon opening Adobe Bridge this error message appears " The application has failed to start because libagluc28.dll was not found. Reinstalling to application may fix the problem"
I have reinstalled and click repair but to no avail
I followed Adobe Support Knowledgebase solution and run CMD and this appears:
c:Documents and Settings/Jesus M Ferraris>
then i entered the command
cacls c:\windows\installer /T /E /C /G administrators:F
but an error message appears - 'cacls' is not recognized as an internal or external command, operable program or bathc file
I also entered the next command
cacls "c:\documents and setting\all users" /Y /E /C /G administrators:F
still the same error as above appears, Please help, have I miss something or was my procedure correct...
P4, 512ram, WXP 80gHD

Very useful.
Good Luck.
My
Si
tes

Error: "Could not complete your request because of a program error" (photoshop CS2 9.0.2 on MAC OSX

Today I started my program (photoshop CS2 9.0.2) and opened a JPG file. When I went to print the file the program crashed and closed. When I restarted the program and went to open the file I got this error message, "Could not complete your request because of a program error".
I have tried several different file types/sizes and all result in the same error message since the program crashed. It will not open any file I try to open. As I indicated above I am using Photoshop CS2 9.0.2 it is on a MAC with OSX 10.4.11.
I called Adobe and the Rep directed me to Tech Note 331307 and told me to Re-create the Photoshop preferences files. Which I did and restarted the program, but when I tried to open a file (any file) I still get the same error message so it doesn't appear to be the preferences.
Does anyone have any info as to what the problem may be and how to correct it.
Thanks

Thanks for the response. OK... This is the first day I have been able to get back to the problem.
My system I am running Photoshop on is a Power Mac G4, AGP Graphics ATY Rage 128Pro chip set 16MB VRAM LCD 1280x1024 32-bit color, 500MHz, 1.75GB of memory, 1 MB L2 Cache, 100 MHz Bus Speed. I had installed the latest security update and repaired the permissions the day the problem started.
Now to day I started the system and went in and created a Guest Account. I logged into the guest account and started Photoshop. Low and behold it worked just fine. So I logged out of guest and logged into my main user account And started Photoshop. Wouldn't you know it.... It works just fine. I can open any file I want with now problems.
I got to thinking after I had done all of this that I wished I had tried to open a file in Photoshop today prior to creating the guest account to see if it still had the problem in my main user account.
I did not change anything else on the system and all seems to work fine now. So at his point I am really not sure what the problem was.
Again thanks for taking the time to respond to this issue.

Adobe Stock Photos Stuck in Trash and Photoshop CS2 won't run!

Okay, I apparently did something stupid. I'm not even sure how this happened, but I realized that Adobe Stock Photos folder was sitting on my desktop (I'm using OS X 10.5.6). I don't know when this happened and I didn't think I needed it so I dragged it to the trash. NOW I cannot run any of my Adobe software (includes Photoshop CS2, Illustrator CS2 and GoLive CS2).
I can see the folder sitting in my trash, but it won't let me drag it back out. So, just as a test, I tried dragging out the one other file (.jpg) and I can't get that one either. I know this isn't a Mac forum, but I'm desparate and cannot find anything to help me.
Probably I am going to have to reinstall everything and (of course) I can't find my CDs!!! Please don't get angry if I'm asking the wrong question. I've done an internet search and I cannot find any solutions.
Thanks, Anne

Adobe stock photos does not even exist anymore.
Have you tried deleting your trash? I have no Adobe stock Photos on my computer and everything works. try restarting the computer.

Adobe Photoshop CS2 posterization problem on vignette

I am having a problem with posterization in my image. When I try to vignette my photo (with black) it starts to block up in areas, mostly in the darkest part of the gradient. It ends up not making a smooth transitional gradient and leaves a line where it blocks up. It shows up on the screen as well as on the print. I have a calibrated LaCie CRT 19" monitor, G5 and I am working from digital raw files from a Fuji S2 that are AdobeRGB and also film scans that have done the same thing. What can I do to prevent this? Is it something to do with my G5 or is it the software in Photoshop? If there is any info that left out to help solve the problem please let me know!
G5 Mac OS X (10.4.5)

If it shows up on screen and in print, then issue is with the software.
Adobe has forums. Might try there.
best wishes
David
Remember to mark an response helpful or solved.
It protects the integrity of the board.

Adobe Photoshop CS2 shuts itself down after printing..

Not sure whether I'm in the right place to post this..
In my workplace, we just bought some new iMacs for design class. They are a 2GHz with Intel Core Duo, and has 1GB 667 Mhz DDR2 SDRAM, and running Mac OSX 10.4.8.
The Photoshop CS2 is version 9.0
I've config-ed the five new iMacs so they can print to a printer, using IP printing. Problem is, most of the time after the students sends the document they want to print to the printer, Photoshop CS2 just shuts itself down. Then the dialog box saying 'the software just unexpectedly quit' appears.
It is confusing me, because our older iMacs (that's not an Intel-based) doesn't have this problem, at all.
is it something to do with CS2 compatibility with Intel-based Macs? or something else.. what needs to be done to stop this annoying problem?
Regards,
Meru
iMacs Mac OS X (10.4.8)
eMacs, iBook G4s Mac OS X (10.3.9)

Windows 7 error “key not valid for use in specified state” | The Oracle Instructor

Adobe Photoshop CS2

Topic
Photoshop CS2 and Nikon D200
Chuck Dell - 09:20am Dec 19, 2005 Pacific
Just purchased new Nikon D200. RAW Images will not open in Photoshop CS2. Receive Adobe Photoshop CS2 error message "Could not complete your request because of a program error." Images taken with this camera will open in Nikon Capture 4.4 and then can be transferred to CS2 But attempting to open RAW images directly with CS2 is futile.
Images taken with Nikon D2h and Nikon D100 flow perfectly through CS2
Only images taken with Nikon D200 will not open in CS2.
Is this Nikon problem or an Adobe problem?
Reply To This Discussion | Back to Topic List | Bookmark | Subscribe
To start a NEW discussion click on the Back to Topic List link and select Add Topic.
If you are in an archive forum please go up to the main topic list (archives are read only).
Messages 2 messages. Displaying 1 through 2.
First Previous Next Last Show All Messages
Joseph liftik - 11:12am Dec 19, 05 PST (#1 of 2)
Wait for Adobe update on ARC that will support D200.
Post Reply | Bookmark
Chuck Dell - 12:11pm Dec 19, 05 PST (#2 of 2)
Excuse me, but what is ARC?
And does anyone know when Adobe will release supporting update?
Post Reply | Bookmark | Edit

upon importing i had the option of selection importinf from a "PICT Resource..."
this was the only option that allowed me to select my JPG images (digital caerma images, btw)
when i select and clikc OK, a message that comes up that says "There are no PICT resources in this file"
moreover, when i convert the JPG images to PICT images (via preview) i get the same message
strange, since i've been able to copy and past my JPG files all along until now...

Adobe Photoshop CS2 has encountered a problem and needs to close.

Just starting to get this error on open in CS2 after a few months of smooth sailing on a new system (below). CS2 now cannot open. It started occasionally and increased. Tried reinstalling. Tried deleting the PS config files and same error. Any suggestions?
Here's a sysinfo paste of my system.
Nick
XP pro SP2
Small Bus. Server network node
Profile- Username.DOMAIN
PHOTOSHOP
Photoshop CS2 (upgrade from ver. 6)
C:\Program Files\Adobe\Adobe Photoshop CS2\9.0
MB - ASUS P5K-E
Disk C: 819 GB Available, 931 GB Total, 819 GB Free
Disk D: 96 GB Available, 232 GB Total, 96 GB Free
Intel ICH8R/ICH9R SATA RAID Controller
Physical Memory 2048 MB Total, 1149 MB Free
Virtual Memory 4740 MB Total, 3900 MB Free
PageFile Name \??\C:\pagefile.sys
PageFile Size 800 MB
PageFile Name \??\D:\pagefile.sys
PageFile Size 2047 MB
One Physical Processor / 2 Cores / 2 Logical Processors / 64 bits
Intel Core2 Duo CPU E8400 @ 3.00GHz
Video1: ATI Radeon HD 3800 Series
Video2: ATI Radeon HD 2400 PRO
Memory Capacity 2048 MBytes
Slot 1
Corsair
CM2X1024-8500C5D
1024 MBytes
DDR2-800 (400 MHz) running 1066
64 bits
Voltage SSTL 1.8V
Slot 3
Corsair
CM2X1024-8500C5D
1024 MBytes
DDR2-800 (400 MHz) running 1066
64 bits
Voltage SSTL 1.8V

Just ran memtest and received no errors. This more or less clears the hardware. I have no idea how to proceed. Does adobe offer any direct support for this sort of problem?

Error 400 when trying to sign-in to Adobe Photoshop 9 [was:Error]

Getting an Error 400 when trying to sign-in to Adobe Photoshop 9. What is the problem?

http://barbarabrundage.com/2013/09/16/pse-8-9-10-cant-sign-in-error-404/
Cheers,
Neale
Insanity is hereditary, you get it from your children
If this post or another user's post resolves the original issue, please mark the posts as correct and/or helpful accordingly. This helps other users with similar trouble get answers to their questions quicker. Thanks.

In adobe bridge in Tools menu below the cache submenu it only says "process collections in Photoshop". It does not give me the option to "load images in layers is Photoshop"

No tengo la opción de cargar imagenes en capas en photoshop desde adobe bridge en el menu herramientas

If all the items do not appear, consider resetting Bridge Preferences.
Close Bridge, hold down Command-Option-Shift (PC: Control-Alt-Shift) and then launch Bridge again. A dialog will appear asking what you want to do. Turn on the Reset Preferences checkbox and click OK. Now when Bridge appears, the preferences are factory-fresh.

Error message when installing Photoshop CS2 in Windows 8

I just upgraded to a computer with Windows 8. I use Photoshop CS2. I am getting the error message below when starting photoshop after installation. I changed program folders, but that did not work. Please advise.
Error: an error has been detected and activation cannot continue. Please restart your computer and reinstall application.

http://helpx.adobe.com/x-productkb/policy-pricing/creative-suite-2-activation-end-life.htm l

PhotoShop CS2 Bridge caused strange loss of desktop visibility/memory ??

I have a G5 (Duel) running Tiger 10.4.6. Just lately the Bridge in Photoshop CS2 has not been working too well - it became very slow and sometimes didn't "see" my images. Yesterday I could get it to find my image folders at all. Then all my desktop started to look weird - even when I wasn't using the Bridge. So I closed all the applications and restarted the computer. To my horror all my desktop and preferences (dock, safari, desktop picture, folders etc.) had been lost. At first I thought I had somehow lost all my image folders but using spotlight I found them all there - distribted in places I had never put them. I sorted everything out again and re-did all my customised stuff but it was scary! At no time did the computer give me any warning of any trouble. It did not crash or anything. I was running QuarkXpress 5 (classic 9) as well and had a Skype window open (although I wasn't using it to talk at the time) Does anyone have any suggestions as to why this happened - has it happened to anyone else ? Thanks for any help.. Diana
Mac G5 Mac OS X (10.4.6) Duel 2.3 1.5 GB DDR SDRAM

windscape wrote:
Hi jamba,
I think the issue is that your output of lspci shows no Audio device. Perhaps it got disabled in the BIOS? dmesg output may indicate something else afoot with your audio hardware.
Hope that helps.
I'll check out dmesg output. also still need to check if something got disabled in the BIOS.
!snd_intel8x0m <- is your problem. Your sound module got blacklisted so un-list it. Modprobe it then try sound again or just reboot and it should work.
moonswan. snd_intel8x0 is the sound card (I think), in the alsa wiki it said it was recommended to blacklist snd_intel8x0m as a quirk fix.
No sound with or without it blacklisted still :-(
thanks

Adobe media encoder error in photoshop

Hi everyone!This morning i have tried to render a video timelapse in photoshop but it showed to me an error which says:''Could not complete the render video command because of a problem with Adobe Media Encoder''.Could anyone tell me how can i fix this error?

Nobody can tell you anything without proper system info or other technical details like exact versions, render settings, details about the source files and so on.
Mylenium

Adobe Photoshop CS2 opening an image in middle of CS opening screen?

Can anyone please help me with a way of opening images in CS2 where after opening they will appear in the middle
of the CS screen rather then in the top left corner?
I can drag and maximize so they appear in the middle, but on reopening another image they default to the top left again, I would like them to always
open in the middle?
Thanks

Still having problems? I was struggling to find any documentation for CS2 online, but realised that my bookshelf goes back to Photoshop 6, and I have Martin Evening's Photoshop for Photographers CS2. Unfortunately, I could see nothing in any of the Preferences tabs that would help.
At this stage I don't really know what you have tried? You should try to reset your workspace, and if that does nothing, reset your preferences. The usual way to do that is to hold down Shift Alt Ctrl while opening Photoshop, but I don't know for sure that worked with CS2.
Bernie Ecclestone would only need a tiny exec jet, unless he wanted to take his wife along. ;-)
CC is Creative Cloud, and Tabs are those things you see along the top of the screen in your web browser when you have more than one page open.
Tauranga is on the North Island, but is very nice and has great beaches (if they have got the oil off) I live in rural Marlborough right in the middle of the prime grape growing area. Try Google with Rapaura. I'm a few hundred metres south of the school.

Adobe bridge raw not working with windows vista in photoshop cc, why?

adobe bridge raw not working in photoshop cc, is there a fix?

Your sure your using photoshop cc on windows vista?
I was under the impression that photoshop cc would not even install on windows vista.
What version of camera raw do you have?
In photoshop under Help>About Plugin does it list Camera Raw and if so which version is it?
(click on the words Camera Raw to see the version)
Camera raw doesn't work if it's a camera raw file or some other file type such as jpeg or tif?
What camera are the camera raw files from?
Officially camera raw 8.3 is the latest version of camera raw that will work on windows vista.

Error Installing Adobe Photoshop CS2

I tried to install Adobe Photoshop CS2 in section http://www.adobe.com/downloads/cs2_downloads/index.html
on a Mac ProBook 2.4 Intel Core i5 processor, 4 GB Memory, Intel HD Graphics 3000 384 MB, install halfway then I see the following information: The installation failed. The installer encountered an error That caused an the installation to fail. Contact the software manufacturer for assistance. can you help me with this problem?

Thanks for replying so fast
Gutted I was happy with CS2. Any idea which are the earliest versions of Photoshop and Indesign I can install on the new Mac?

Photoshop 7

Similar Messages

Maybe you are looking for