Photoshop can not print the maximum amount of data that can be spooled to a PostScript printer is 2G

Hi all,
This is the first time I've worked with the .psb (large format) size and I have gone to print a PDF of the file and I get the message:
"photoshop can not print this document because the document is too large. The maximum amount of data that can been spooled to a PostScript printer is 2GB".
The file itself is a 2700x1570mm 300dpi flatten .psb image that is 500mb in size.
Not sure how I can get around this, where abouts do I see the image size information that is being spooled?
Any help would be great

There's no easy way to see the size of the image that's being spooled, but 2G limit is uncompressed, 4 bytes per pixel (either RGBX where X is a padding byte, or CMYK, depending on the image / printer), times about 1.6 because the image data is sent in ASCII85 format rather than binary.
With your image at over 100 inches at 300 dpi, you're also perilously close to the 32k limit on the pixels in any one dimension (31,900 by my calculations) that PostScript can handle.
The limits are 32767 pixels in either dimension, and 2GB of data total. The data that's sent at 4 bytes per pixel, and converted to ASCII85 so that it'll make it across any connection. ASCII85 gives about a 1.6 expansion factor, if I remember correctly.
Do you really need a 10 foot image printed at 300 dpi? If not, changing down to 200 dpi will probably let this image print.

Similar Messages

  • Maximum amount of ram that can be installed

    What is the maximum amount of ram that can be installed in MAC Book?

    MacBook (Mid 2006) (Model ID 1,1): 2GB
    MacBook (Late 2006) (Model ID 2,1): 3GB
    MacBook (Mid 2007) (Model ID 2,1): 3GB
    MacBook (Late 2007) (Model ID 3,1): 6GB
    MacBook (Early 2008) (Model ID 4,1): 6GB
    MacBook (Late 2008) (Model ID 4,1): 6GB
    MacBook (Aluminium Late 2008) (Model ID 5,1): 8GB
    MacBook (Early 2009) (Model ID 5,2): 6GB
    MacBook (Mid 2009) (Model ID 5,2): 6GB
    MacBook (Late 2009) (Model ID 6,1): 8GB
    MacBook (Mid 2010) (Model ID 7,1): 16GB
    Cheers,
    Adam

  • Maximum amount of data

    Hi,
    We're planning to implement a batch/bulk refresh of some objects in our frontend
    application. This refresh requires retrieval of data from the Back Office and writing
    of same data to the Front Office. In line with this, what is the maximum amount
    of data Tuxedo can handle per transaction?
    Any help is very much appreciated...
    Thanks,
    rc

    There's no limit, as long as it is broken up properly. Whatever you can
    accomplish within the transaction timeout limit is the upper boundary.
    You probably do not want to use a transaction for a bulk data load,
    though.
         Scott Orshan
         BEA Systems
    rc wrote:
    >
    Hi,
    We're planning to implement a batch/bulk refresh of some objects in our frontend
    application. This refresh requires retrieval of data from the Back Office and writing
    of same data to the Front Office. In line with this, what is the maximum amount
    of data Tuxedo can handle per transaction?
    Any help is very much appreciated...
    Thanks,
    rc

  • MAXIMUM SIZE OF DATA THAT CAN BE HANDELLED BY SOAP ADAPTER

    hi 2 all,
    Soap adapter is calling webservice through bpm.So i but its taking time to call the webservice.So i wanted to know,what is the maximum size of data that can be handelled by the adapter.

    There is no maximum size. It depends on your h/w configuration and also the consuming applications response times as well.
    Ideally a payload size of 5 - 10 MB provides the best performance.
    Regards
    Bhavesh
    PS: Please do not use Captials on the Internet.

  • Maximum file size data that can be send to MQ using mq adapter

    Dear All,
    What is the maximum file size data that can be send to MQ using mq adapter ?
    The file can be csv, fixed , xml.
    Please let me know if anybody is aware of any limitations
    Best Regards
    Arc

    If you are on 10g then you are looking at a limit of 7MB, although any messages over 1MB will require some tuning.
    You can integrate using the native schema, or xml so you can use csv, fixed length, and xml files.
    cheers
    James

  • I just bought a docking station for my iPad so I could plug into a mixing board and record a live show.  I was disappointed at the time limitation for the recordings.  What is the maximum amount you can record a song into GB for the iPad?

    I purchased a docking station for my iPad so that I could record a live recording of my band directly from a mixing board this weekend using GarageBand.  Unfortunately, I was unaware of the song length limitations of the iPad version of this program.  Basically, was unable to capture more than 15 minutes of the gig.  I've read other conversations on this forum and can't really determine the maximum amount of time this application can record.  Can anyone tell me how long GarageBand for ipad can record at one single time and how to adjust the settings to achieve this?  Also, is anyone aware of any other apps than could be used to record a longer please share.  Thanks.
    CP

    I received an email reply from George, the Founder and CEO of Studiomini, he indicated to me that their app does not have any time limitations in regards to recording like GB does, you are only limited by the amount of free space on your iPad.  Fo what it's worth, I think the Alesis IO Dock is an amazing piece of equipment.  I would highly recommend purchasing the IO Dock and plugging your mixing board into the dock to capture your rehearsal.  Hopefully the feedback I received from Studiomini is accurate and I can capture my entire rehearsal at one time.  I hope this feedback helps.  One last note, apparently their will be a update soon to view Studiomni in the landscape view on the iPad instead of just the portrait view.

  • How can I copy the maximum amount of music to my ipod classic 160gb

    how can I copy the maximum amount of music to an ipod classic 160gb

    See also Repair iTunes Security Permissions and apply the suggested steps to the iTunes folder and the source media folder.
    I may be reading too much into things, but is your media stored in a bunch of folders where each folder represents a playlist? If so my script ImportFolderStructure might be useful to you...
    tt2

  • What is the maximum amount of RAM I can install in a late 2011 Macbook Pro 17"?

    What is the maximum amount of RAM I can install and will be suported in a late 2011 Macbook Pro 17"?
    Thank you,
    Patrice

    http://www.everymac.com/systems/apple/macbook_pro/specs/macbook-pro-core-i7-2.4- 17-late-2011-unibody-thunderbolt-specs.html
    Although Apple states a maximum of 8 GB, OWC (macsales.com) has tested 16 GB, so if you want to install 16 GB, I'd go with OWC as they tested it and do guarantee their RAM to work with Macs.

  • What is the maximum number of columns that can be displayed by sqlplus?

    Hello,
    Questions:
    Is there a limit on what sqlplus can display?
    What is the maximum number of columns that can be displayed by sqlplus?
    I cannot find anything on this in my search. I checked the limits page:
    http://docs.oracle.com/cd/B19306_01/server.102/b14357/apa.htm#sthref3658
    http://docs.oracle.com/cd/E11882_01/server.112/e16604/apa.htm#i635278
    It does not specify any column limits; however, I'm thinking it is tied to LINESIZE which is system dependent.
    Please confirm if true.
    Thanks!

    Received answer directly from SQL*Plus Development:
    "sqlplus does not have a limit on the number of columns it displays."
    They created a table with more than 256 columns with data and had no problem retrieving the data.

  • What are the maximum numbers of parameters that a subvi can be obtained?

    What are the maximum numbers of parameters that a subvi can be obtained?

    I'm not sure I understand exactly what you mean. Do you mean to ask how many parameters you can pass to a subVI? That would be a very large number because a connector pane can have a dozen or so terminals--and if each terminal is a cluster... You could pass a very large number indeed.
    Having said that however, you probibly wouldn't want to. Remember the more parameters you're passing the more tightly coupled your code is--and the less reusable the code will probibly be.
    Mike...
    Certified Professional Instructor
    Certified LabVIEW Architect
    LabVIEW Champion
    "... after all, He's not a tame lion..."
    Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps

  • Changing animation frame rate when rendering in photoshop does not change the length of the video?

    I made a walk cycle animation in Photoshop CS6 and want to render it into a quicktime format. I'd like it to be 12 fps, but when I rendered it at 12 fps the video seemed to be missing frames, and the video was 3 seconds long. I have 98 frames to my animation; doing the math, at 12 fps it should be 8 seconds long. Not 3.
    I was confused and for curiosity's sake I rendered the video at 6 fps, trying to really slow it down. The video ended up being STILL 3 seconds long and only maybe 20 frames. I was missing literally 70 frames. I'm so upset with this rendering thing, I could chuck my computer at the wall.
    Does anybody know of a solution to this?
    edit: If it means anything, I've tried rendering it straight from the frame view and the timeline view. Each time I render it I have the timeline frame rate match the rendering frame rate as well.

    floriannaart wrote:
    Changing animation frame rate when rendering in photoshop does not change the length of the video?
    Photoshop CS6 and CC support two types of animation Frame animations and a Video Timeline
    Changing the frame rate should not change the length of a video timeline. It should just change the number of frames that are rendered.  To change the length of a video you need to change the length of the video timeline.  If you increase the length of the timeline and there is audio I'm quite sure there will be a problem with it,  The Video part will most likely be better then the sound. The required number of extra frames can be generated however the video may look like slow motion. If you decrease the length the motion will speed up.  The length of a video is normally done be editing video clips which are trimmed and stitched together to get the desired duration. Not normally done by altering the duration of a clip.
    The duration a of Frame animation is the sum of the times each frame is displayed.  In a frame animation the length of time a frame is displayed can be varied it not a normal motion picture video.  To have a smooth frame animation you need a sufficient number of frames that are different from each other to show smooth motion.  You can use Photoshop Frame animation tween feature to have Photoshop manufacture frames to help with a smoothing the animation.   Once you have a frame animation the length with the motion you want you can have Photoshop convert it to a video timeline and render a normal motion picture video.  It will not have audio but you can add audio to it.

  • The maximum number of data files that can be accessed on the ORACLE DB is r

    Hello Gurus,
    We are facing problem in our BW production server
    The maximum number of data files that can be accessed on the ORACLE DB is reached
    Error Message :
    ORA-00059: maximum number of DB_FILES exceeded
    We have search a SAP Note regarding this error but this is for oracle - 8i, we want to solve this problem in Oracle - 10g
    Thanks & Regards
    Shishir
    Vital Information
    Database - ORACLE - 10.2.0.2.0
    O/S - AIX - 5.3
    SAP - BIW ( 700 )

    Hi,
    check Data transfer from one BW system to another
    regards,
    kaushal

  • The Maximum Amount?

    Thanks to several users, 90% of my Mac problems have been solved and both of my Macs have been running smoothly for nearly a year now.
    I currently have an iMac 17" (G4) from 2004 that runs smooth as butter. But the one I use most of the time is my MacBook Pro 15" 2.16 GHz Intel Core Duo. It was bought refurbished Winter 2006 and had 1 GB of memory installed.
    There's still one empty slot in my Mac and I just bought the game Spore and would love to be able to run it at (close to) Maximum settings.
    I have read that the maximum amount of memory my particular model can take is 2 GB. But I believe I have seen 2 GB RAM (on one card) being sold for my model.
    So my question is this: is the maximum amount of memory for MY particular model of MB Pro limited to 2, 3, or 4 GB?
    I've also read that www.datamemorysystems.com is a reputable seller.
    Thanks for any replies!

    I've also read that www.datamemorysystems.com is a reputable seller.
    To add my two cents--for the last five years I have bought the majority of my RAM from DMS with the remainder being from OWC. I find the DMS RAM finder system to be helpful and easy for inexperienced buyers to navigate, and I've yet to find incorrect information.
    Only once did I have trouble with DMS RAM and it was due to an oddball pickiness on the part of an old G3 PowerBook. DMS worked with me to get past the issue.

  • The amount of data that was returned by data connection has exceeded the maximum limit that was configured by server admin

    Hi There,
    When i try to view info-path form item getting warning (This issue is not with all items but for some of them...)
    "The amount of data that was returned by data connection has exceeded the maximum limit that was configured by server admin............."
    Thanks in advance!!
    Regards
    Vikas Mishra
    Vikas Mishra

    HI Vikas,
    to resolve this do this from central admin
    Ensure to follow the below steps.
                                             i.    Open
    the central administration
                                            ii.    Go
    to General Application Settings
                                           iii.    InfoPath
    Form Services
                                          iv.    Configure
    InfoPath Form Services
                                           v.    Click
    on Data Connection Response Size
                                          vi.    By
    default it is 1500 kilobytes
                                         vii.    Change
    the Response Size in kilobytes (Increase the number).
    Kind Regards,
    John Naguib
    Senior Consultant
    John Naguib Blog
    John Naguib Twitter
    Please remember to mark this as answered if it helped you

  • Can not see the option Execution with Data Change in the infoprovider?

    Hi team,
    i am using query designer 3.x, when i go into my bex brodcaster settings and schedule my report
    i can not see the option "Execution with Data Change in the infoprovider",
    i can only see 2 options
    Direct scheduling in background process
    create new scheduling
    periodic,
    is there any setting which i would be able to see the option "Execution with Data Change in the infoprovider"?
    kindly assist

    Hi Blusky ,
    check the below given link.
    http://help.sap.com/saphelp_nw04/Helpdata/EN/ec/0d0e405c538f5ce10000000a155106/frameset.htm
    Regards,
    Rohit Garg

Maybe you are looking for

  • Problem installing SQL server 2014 Express Edition on Windows 8 32 bit

    Installation stops at a certain point and do not progress any further. Here i am attaching an image for the scenario.

  • HT204023 Hotspot working with blocked data plan

    We've blocked data usage through our provider on my sons phone. Data was restricted to wifi only. But then he began using the phones hotspot and his iPod to access the Internet. How is this possible? Data should be blocked so why does hotspot still w

  • After Effects not Installing

    I have tried numerous times to download after effects but it just won't install. It says "Installation Failed". This is the error message I get. Exit Code: 7 Please see specific errors and warnings below for troubleshooting. For example,  ERROR: DF01

  • Bi_server will not start

    I'm trying to figure out why my bi_server will not start.  It was running fine, but after restarting the server, I can no longer start it and I get the error below: b_server1 FAILED_NOT_RESTARTABLE When I try to start the server, I get this long erro

  • Pls Help :JTable Double Value Editing Problem

    hi friends as i am new to swings and Jtable pls help me if u can. in the code copied below when i start putting value into the Double column of JTable a ( .0 ) is appended at the end which is undesirable it should be like that only when the value is