Photoshop CC on a Mac running Mavericks does not recognize Epson 3880

This is my first post to this forum so I hope that I am following protocol and presenting my issue clearly.
I am running Photoshop CC (on a Mac Retina with an Epson 3880). It has worked fine for months but it crashed twice yesterday while I was in print mode as I was playing with configurations – switching from Epson to Adobe and playing with color management. (I have an Epson 3880.) Now when I open a file and click File/Print or File/Print One Copy, the printer selection menu does not appear and instead I get a message "There was an error opening your printer. Printing functions will not be available until you have selected a printer and reopened any documents." After that the print and print one copy commands are greyed out on the File dropdown menu for that image file, but if I open another, the print function appears to be available but the same thing happens
I have downloaded the latest printer driver from Epson, deleted the printer from System Preferences, installed it again and rebooted. I have done all this twice to no avail. (The OS, the printer drivers and Photoshop CC are all up to date.)
I can use the print command from Lightroom 5 but not from Photoshop CC.
How can I reset Photoshop’s print function to recognize the printer?

Epson has had a LOT of problems with drivers on MacOS 10.9.
Contact Epson for driver updates that work correctly on MacOS 10.9.

Similar Messages

  • After OS X Maverick download my mac book air does not recognize my external hd

    after OS X Maverick download my mac book air does not recognize my external hd

    Finder > Preferences > General
    Make sure External Disks is selected.

  • Photoshop CC 2014 (fresh installed and updated) does not recognize my graphic processor (NVIDIA GTX 840)

    Photoshop CC 2014 (fresh installed and updated) does not recognize my graphic processor (NVIDIA GTX 840) but instead only a Intel HD 4600. How do I ensure that PS is using the full phardware power of my notebook. My OS is WIN 8.1 Thanks for your help, Meik

    In the end it was the NVIDIA software - excluding PS as application for support by high performance graphic processor to save energy - activated NVIDIA card use for PS & LR all fine now.

  • TS3276 How do I open Microsoft word documents in a Email since Maverick does not recognize MS Word?

    How do I open a Microsoft Word cocument in a Email since I upgraded to Maverick. Maverick does not recognize MS Word, Excel and Power Point.

    MS Office 2008 and 2011 work fine in Mavericks. What version are you using? You can always use a program such as Open Office to open the docs.
    Pete

  • When you load Windows via Boot Camp Assistant program and run Windows does not recognize the "usb" outlets cannot identify the device through the Dvd or flash

    When you load Windows via Boot Camp Assistant program and run Windows does not recognize the "usb" outlets cannot identify the device through the Dvd or flash

    Did you install BC drivers on the Windows side?

  • I do not have access to my primary computer. I understand i will lose all saved data on my ipod touch. I have the latest vesion of itunes. I have a mac. Itunes does not recognize my device. What do i do?

    I need to restore my ipod touch. I do not have access to my primary computer. I understand i will lose all saved data on my ipod touch. I have the latest vesion of itunes. I have a mac. Itunes does not recognize my device. What do i do?

    Fix what?
    You do not mention a problem.

  • Maverick does not recognize my Phonic Firefly 302 Firewire. One year waiting for a fix.

    Maverick does not recognize my Phonic Firefly 302 Firewire. One year waiting for a fix.

    Cedip,
    in September 2012, following the release of Mountain Lion, Phonic advised Firefly owners that their products’ support ended with Lion — with the possible exception of the Firefly 302 USB. Since they didn’t support the Firefly 302 FireWire under Mountain Lion, they’re not going to support it under Mavericks either. (Note that Mavericks was first released eight months ago, not one year ago.)

  • Mavericks does not recognize audio CD's on iMac

    Mavericks does not recognize audio CD's on iMac. Is there a solution for this?
    My first time on this platform as could not find a solution on net.
    B

    +1 here
    iMac with OS X 10.9.5 does not recognize CDs on external superdrive. Tested with two separate external drives. CDs not defective. No issues with DVDs. Any solution available?

  • Mac Pro Hexacore does not recognize new drive

    I have just received my new 2 TB Seagate constellation drive and the mac pro hexacore running OS X 10.6.7 does not recognize it.  From touching the drive it is warm and feels like it is running but nothing shows up on the desktop and Disc utility does not see it at all.  Since this is the highest quality drive with a 139 year MTBF it seems infinitely more likely that something is not right in the mac than in the drive.  In the past adding new drives has been simple enough but this one is not even showing up.  Ideas?

    Actually I had ordered 2 of these drives and at first I thought it was an Apple problem but I put the second drive in and it worked perfectly, so the first drive must have been DOA.  Thanks for the reply.  I just wanted to make sure I had not forgotten to do something to make the drie be recognized.
    Thanks
    George

  • Time Machine in Mavericks does not recognize previous backups

    Hi!
    I've just installed Mavericks and Time Machine does not recognize my previously existing backups. Tried reconnecting to my backups and nothing changed (I have used this successfully in the past with Lion). Decided to do a full new backup in another drive, which worked fine, and after deselecting that drive in TM preferences and selecting it again it also does not recognize the new backup and indicates it is going to do a full new backup... Any suggestions?
    Besides the problem of not recognizing previous backups, this is problematic for me because I am used to do 2 different TM backups in 2 different locations and it was very easy just to select the corresponding disk in each location and TM would recognize the existing backups and just follow on the incremental backup. Now this seems to be impossible in Mavericks...
    Any help will be much appreciated.

    FireWire or thunderbolt?
    FireWire and thunderbolt HD interfaces seem to be universally affected.   I've seen no exemptions yet to same
    There is no resolution to this yet, techs are working on it
    Its happening on 80% WD Raid My Book on this board and others, and happening entirely on Firewire and Thunderbolt drives and apparently all WD Mybooks
    Its seen on O Raid and 1 Raid both alike.
    also occurring on LaCie (Seagate) FW drives.
    until resolution , use external USB drives proven to work with Mavericks.

  • My Mac Book Pro does not recognize the presence of a DVD or CD

    Ever since I upgraded my MacBook Pro, it does not recognize a DVD or CD of any type when I put it in. I have a store bought DVD, the Social Network, which worked fine before upgrading to OSX operating system. Music CD's were okay then, too. Now, neither is even recognized by the player. Thought maybe it needed to be reloaded, but na't figure out how to do that. This is very frustrating, and makes me start to second guess my decision to switch to an Apple product. I've only hd this computer about 18 months, did the upgrade last September (?) and have had difficulties ever since. HELP me please!!!

    Use Apple Hardware Test
    Open the Help Viewer’s Action pop-up menu (looks like a gear) and choose Print to print these instructions.
    Disconnect all external devices except the keyboard, mouse, display, and speakers. If you have an Ethernet cable or external DVD drive, disconnect them.
    Restart your computer, holding down the D key while the computer restarts.After your computer restarts, you should see the Apple Hardware Test chooser screen. If you don’t, Apple Hardware Test may not be available on your computer. You may be able to start Apple Hardware Test from the Internet. Reconnect your computer to the network, and then restart your computer while holding down both the Option and D keys.

  • After Mountain Lion download, my Mac book pro does not recognize my login password. Help!, After Mountain Lion download, my Mac book pro does not recognize my login password. Help!

    I Have downloaded M Lion on a 2007 (?) 17" MacBook Pro and now the computer does not recognize my password on trying to restart.  Is there anyway to undo the download so I can get my computer back!!????

    Hello WadeH3,
    You may be able to reset your password using your Apple ID. The following article outlines how to do so:
    OS X: Apple ID can be used to reset your user account password
    http://support.apple.com/kb/HT4798
    Thanks,
    Matt M.

  • OS X Mavericks does not recognize my hard drive as start up disk. What can i do? I own an iMac early 2009

    I recently downloaded OX Mavericks and run the installer. But at the moment of choosing the start up disk, it didn't allow me to use my internal drive as start up. Any ideas how to fix this issue?
    Your comments are most welmcome. Thank you

    Thank you. That's what I thought will need to happen.
    One more question. I tried using the Apple install disk that came with the computer. It's an OS 10.5.6 disk. It does not see my 10.6.8 system internal hard drive to repair. All it see's is itself 10.5.6 disk. Do you think I can use a 10.8+ disk utillity since that is a higher system it will see the 10.6.8. Where the 10.5.6 does not?
    I don't want to turn the computer off for fear I'll get the question mark again. P-Ram got me going last time but for how long I don't know?  It would be nice to be able to turn the computer off for the night and startup as usual to give it a rest and try to reset itself.
    Thanks for your help, I know I will eventually need to re-install. But I am in the middle of a project with tight deadlines and all I can do right now is back-up. Trying to migrate to another computer temporarily to finish the job. That's a lot of extra work in the short time also.
    Just trying to put a band-aid on it for another couple weeks.

  • Photoshop Elements 11 does not recognize Epson Perfection 4990 Photo Scanner from "File"/"Import"

    I just upgraded from Photoshop Elements 6 to Elements 11 on a brand new iMac running OS X 10.8.2, but Elements 11 will not recognize my Epson Perfection 4990 PHOTO Scanner as an option to import from when I click on "File" then "Import." Is there a Plug-In that may be missing for this to operate as it used to in Elements 6 running on an older G5 Non-Intel processor?  I don't have the new Elements 11 Disk to copy anything from, since I downloaded the program directly from Adobe.

    See this Tech doc:
    http://helpx.adobe.com/photoshop-elements/kb/twain-installed-photoshop-elements-11.html

  • HELP! My Mac os x does not recognize Cd's or Dvd's!

    My Mac OS X is not recognizing CD's or DVD's! Every time I try to insert a cd or dvd, the computer just spits it back out!
    I've tried looking through different forums, but no one seems to have the answer!
    Does anyone else have this problem? If so, how do you fix it?

    You could try resetting the SMC and PRAM that sometimes helps in situations like this.
    You don't mention what your system is or if this is happening with both blank and written disks so it's difficult to give much more information.
    Of course the most likely reason for the problem is a hardware fault. Is your system still under warranty or do you have Apple Care? If so taking it in for service is the best bet.
    regards

Maybe you are looking for