Photoshop CS 6 Extended - 3D Option - Where is it?

Hey guys.
I got Photoshop CS6 Extended but I don't find the way to create 3D.
This is the performance tab:
I can also see that there is 3D somewhere but it's hidden somehow ..

I'm surprised you can even get CS6 to run with those specs.
4 GB of RAM are indeed enough to get it to launch.  Running it to its full versatility is another story.  These days 8 GB is the minimum recommended.  Personally, I insist on 16 GB, but that's just me.  Others have 48 GB and even 64 GB installed.
How much VRAM is installed on that graphics card? If it's less than 500 MB, it won't support 3D; 1 GB of VRAM is recommended.
You have your boot (C:) drive also designated to act as your primary scratch drive.  That means that Photoshop scartch will be sharing your one set of read/write heads with the swap files of the OS
The rinky dinky 12 GB o free space on that C: drive will be used in no time.
I suggest you untick (uncheck) the C drive from that preference box.

Similar Messages

  • I can't find the Preferences option in the help menu on Photoshop.  Can you tell me where it is?

    My problem is that I can't find the Preferences option in the help menu on Photoshop.  Can you tell me where it is?

    For Windows, it's under the Edit menu or Ctrl k.

  • Silent install Photoshop CS 6 extended and how do i get it?

    I hva bought a license for Photoshop CS 6 extended, and i need to to get a hold of a .msi (microsoft installer) file for this application, where do i get it?
    I also want to do the silent install for this application, with both installation and registration of the product using my license. I have no internet connection and i am wondering if this i possible?

    Hi There,
    Please go through the doc below to see the workflow to create a .msi.
    http://wwwimages.adobe.com/content/dam/Adobe/en/devnet/creativesuite/pdfs/AdobeApplication ManagerEnterpriseEditionDeploymentGuide_v_3_1.pdf
    Thanks,
    Ashish

  • How to fix "We are unable to start your subscriptions for adobe Photoshop CS5.1 Extended. Subscript

    how to fix "We are unable to start your subscriptions for adobe Photoshop CS5.1 Extended. Subscriptions edition" please heelp

    Hi migliii,
    I found a few solutions mentioned in this discussion thread Adobe photoshop cs5 extended installation error (Mac); Inconsistency in installer database. If you are unable to resolve your problem still, I'd suggest that you contact Customer Support (http://www.adobe.com/aboutadobe/contact.html). Use any of the options on this page to get in touch with a customer support person.
    Thanks,
    Preran

  • Photoshop CS5.1 Extended: Could not complete your request because there are too many Files Open

    I saved a file last night and now this morning I get an error message stating: "Photoshop CS5.1 Extended: Could not complete your request because there are too many Files Open. Try closing some windows and try again.". I've rebooted the system and made sure Photoshop was the only program running and that there were no other files open prior to trying to open my file. I increased Photoshops ram usage, checked the OpenGL settings, 3D and VRAM settings, cleared my temp files and am at a loss for opening this file.
    System Specs:
    Win 7 64
    6 core I7 processor
    32gb Ram
    3GB VRAM
    600gb free space on 7200 rpm drive
    File specs:
    1 3D object replicated maybe 5 times (yes, I should have rasterized them, and will do that to 4 of them if I get the file open)
    Maybe 8 textures
    Not sure how many total layers.
    Is there anyway to get Photoshop to reopen this file?

    No, more VRAM is useless. I had the same thought as you so I tried with a friend's computer with 3GB of VRAM for 8GB RAM (mine has 1GB VRAM for 16GB RAM). Still got the same error message. Sorry guys but our files are lost until Adobe fix the error in Photoshop code. I hope in the future they will find a way to either fix this error or give a clear limitation, it is really a shame such a dangerous problem exists and persists for more than 3 photoshop gen.
    Still you may be able to have at least a flat image of your latest file by trying to open the file as smart object. I started my work over by doing that. Not a lot but better than nothing.
    However for my new file I am trying something different : Each time I think a 3D file is final, I do not rasterize it but make it into a smart object and save the new smart object into a single separated .psd file. If any change is needed I can still edit all of my 3D objects by opening them separately. So far it works, the global file is lighter with few to no 3D objects inside but I will not say it is a 100% no-risk method yet.
    Last advice I can give everyone : Before closing the file you are working on, save it as a copy (File / Save as... and check 'As copy' in the options below) then with your main file still open, try to open the copy. You may need a lot of memory if your file is heavy but still if the dreaded error message appears when you try to open the copy then remove or rasterize some 3D objects in your main one. Save again as copy and try to open the copy until you do not get the message anymore.

  • Problem with Subscribing for Photoshop CS5.1 Extended Subscription Edition

    Okay, so it goes like this... (I just downloaded and tried to set up Photoshop) The part where I put the serial number worked just fine with the green check sign and all.
    But after that and me signing in, the dialgue box goes like: "We were unable to start your subscription for Adobe Photoshop CS5.1 Extended Subscription Edition.
    Please choose Close and re-launch your product. You will be prompted to start your subscription once you launch the product."
    So I clicked close and re-launched Photoshop. But when the same dialogue box came out, the same thing happened; even after I correctly filled in the serial numbers,
    I still couldn't subscribe for Photoshop and thus have a trial account of 30 days instead of a full version.
    Please help me soon and Thank you.

    For the best assistance, I recommend our chat support at http://adobe.ly/tl8Vx7.  Our chat representatives can provide a personalized experience to resolve the issues you describe.

  • Should i upgrade from photoshop cs3 extended to photoshop cs6 non extended

    hi im just wondering should i upgrade from photoshop cs3 extended to photoshop cs6 NON extended...... would i loose options from my extended version?
    also i dont use photoshop cs3 that much, does anyone think its worth me upgrading?
    thanks
    lee

    Good day!
    I think I read that with 2013 the upgrade path would be shortened, so you are probably not eligible for upgrading anymore.
    Apart from that the benefit of purchasing the current version of Photoshop naturally depends on what you are doing with Photoshop (both in terms of which features you use and how much you use the application overall).
    Smart Objects have been improved quite a bit, Puppet Warp is an interesting feature, Configurator allows for the easy creation of custom Panels that can combine Tools, Commands, Actions etc.,  …
    But to judge the programm yourself you could just install the trial – mind you, the trial is Photoshop Extended, so you may want to consult the Reference on which features you would not get with Potoshop Standard.
    You might also want to look into Cloud Licensing – or at least »Adobe« wants you to …
    Regards,
    Pfaffenbichler

  • Can I merge Photoshop CS6 with extended into Photoshop CS4 or CS5 will work together ?

    Can I merge Photoshop CS6 with extended into Photoshop CS4 or CS5 will work together ?

    Versions of Photoshop have different installation trees and user preferences.  You do not merge Photoshop versions. Each version is independent.  When you install newer versions of Photoshop the are options to migrate your presets and Preferences. You can start and use any version installed on your machine.  For the most part newer version of Photoshop are backwards compatible with older versions of Photoshop. However some changes  Adobe make to Photoshop change user interfaces and and the way Photoshop performs some functions these changes break some user actions, scripts and user work-flows.  In fact all the version you listed CS4, CS5 and CS6 have comparability issues.  In that respect Photoshop CC is not any better it has compatibility issues.  
    Newer versions of Photoshop have new functions and updated old function.  Older versions can not handle everything save by newer versions of Photoshop. If you save PSD and PSB files with the maximum compatibility option checked. Older version should be able to open you layer document with layers that look like what was saved though some layer may be altered and may even be a different layer kind then was saved. If you need to support older versions of Photoshop always use the maximum compatibility option.

  • I'm a beginner and would like to know which Photoshop to use (so many options). The only edits I care about being able to do are: whitening teeth, smoothing complexions/taking away blemishes.  Does any photoshop have these options? I haven't been able to

    I'm a beginner and would like to know which Photoshop to use (so many options). The only edits I care about being able to do are: whitening teeth, smoothing complexions/taking away blemishes.  Does any photoshop have these options? I haven't been able to find the teeth whitening one anywhere. Also, I don't want it to lessen the high quality if my photos.  Thank you so much!!

    Hi Erika,
    I came to Lightroom quite recently (in the last month!)  from Photoshop Elements 11. I like the organization features in LR better, but for adjustments such as the ones that you mentioned I would leave LR and go back to Photoshop Elements 11, primarily because that is what I know. I don't use the subscription service, mainly because I already owned and installed the boxed version of Photoshop Elements 11 and adding it to a subscription service with Lightroom seemed redundant. I am sure someone in the community will (or has) comment(ed) that it is possible to whiten teeth and cure blemishes within LR, but I haven't figured out how to do that yet. Check out the TV Adobe free tutorials, particularly Julianne Kost's tutorials. She has a good presentation style and you might find the LR answer that you need with detailed instructions.

  • Which Apple computers can run Photoshop CS 6 Extended?

    I'm buying a new computer, but I need one that can run Photoshop CS 6 Extended with the video and storyboard features. My 2011 Macbook Pro 13' without discrete graphics was not able to, but my mid 2010 Macbook Pro 15' was. I want to make sure that my new computer would be able to run the program. Can somebody help me? Is the new Macbook Air (or the one from last year) okay? What about the Macbook Retina 13' or 15'? Thank you so much!

    yuechen,
    this Adobe page lists the system requirements for Photoshop CS 6 Extended. It looks as though VRAM might have been the stumbling block for your 13-inch MacBook Pro; do you know how much RAM was installed in it? Apparently Photoshop CS 6 Extended requires 512 MB of VRAM, and your 13-inch MacBook Pro would only allocate 512 MB to its integrated graphics if it had at least 8 GB of RAM installed. If VRAM was the stumbling block, then a Mid 2013 or Early 2014 MacBook Air with 8 GB of RAM would definitely have enough graphics memory allocated. (I don’t know if one with 4 GB of RAM would have enough; it might.) Similarly, an Early 2013 or Late 2013 MacBook Pro with at least 8 GB of RAM would meet the graphics memory requirement; I don’t know if one with 4 GB would or not.

  • I have photoshop CS 4 extended.  Just recently got a new Canon 70D and a new Dell Inspiron 17 with windows 7.  When I download my pictures from my new camera they will not come up in raw.  Contacted Canon.  They gave me something to try but it did not wor

    I have photoshop CS 4 extended.  Just recently I purchased a Canon 70D as well as a Dell 17 Inspiron with windows 7.  When I download my pictures from my camera to the computer, they will not open up in raw, only jpeg.  I contacted Canon, and they told my to try something but it did not work.  How do I get my raw pictures to open up in CS 4 on my new computer from my new Canon 70D?

    You will never be able to open your raw files from your new camera in CS4.
    You need version 8.7.1 of the Camera Raw plug-in (ACR), which only runs in CS6 and higher.
    You need to locate, download, install and run the free, stand-alone application Adobe DNG Converter on each batch of raw files from that camera, in order to convert them to raw DNG files that can be subsequently opened by ACR in CS4.
    Remember you need to launch and run the DNG Converter on each folder (not files) containing your Canon raw files.  THe DNG Converter doesn't do it magically for you just sitting on your HD.
    Or you can upgrade.

  • Wo kann ich noch Adobe Photoshop CS 4 extended herbekommen?

    Hey Leute, ich sucheseit längerem Adobe Photoshop CS 4 extended aber ich finde es nirgendswo zum downloaden.
    Einen Key habe ich schon etwas länger. Ja legal ! Sonst wäre ich ja ziemlich blöd um mich hier nach der exe umzuschauen.
    Also da ich Mediengestalter für Digital und - Printmedien werden will möchte ich nach Bewertungen von Freunden mit diesem Programm beginnen.
    Hoffe das ich eine schnelle Antwort erhalten werde.
    Bis dann ,
    dMEART220

    Danke für die schnelle Antwort , jedoch bin ich gerade umgezogen und somit kann ich mir die CD nicht aus
    leihen. Kennst du i-ne Seite wo ich den Download finde? ich will nichts mit crack oder keygen downloaden nur das benötig
    te so als ob es die trial version ist.

  • Adobe Acrobat Pro Extended | Print Option | Enable Flash Object Issue

    Hi,
    We are facing some problems with Adobe Acrobat Pro Extended Print Option.
    We had a requirement to embed interactive Flash graphs in the PDF file, user will interact with these graphs and whatever graph he plotted, the data for it will be saved in PDF text field, so that on the next launch we can fetch the data to the flash from PDF text fields, so that user can see what changes he did last time. This works great, we are able to successfully comminicate from PDF to flash and then from Flash to PDF.
    Please note that, PDF can have multiple graphs on different pages.
    The issue we are facing is when we interact with the graphs and then try to print the PDF, in that case only the currently active graph or flash file (The page on which user is currently on) will be seen enabled in the print, the graphs on the other pages, which are not currently visible are seen in disabled state hence the data on it does not get printed.
    We have also used the "RMA.activated = true;" command, still no success. Please refer to the screen shots below to understand the issue in more detail..
    Flash Embed Options:
    In the Print Option, it looks disabled:
    The required/desired output is as follows:
    We want all Graphs to get printed in enabled state and with the data user had entered. Please do let me know, if there is any workaround to achive this functionality.
    Thanks,
    Ajit Danve
    Sr Developer
    Aptara, Pune.

    Which version. I think it is a minimum of AA9.2 that is needed for X64. Anyway, you should probably either open Acrobat and do the update (help menu) or download all of the updates from Adobe>downloads>updates and install them in order. The current version is AA9.3.4.

  • No option where to install XP

    I have Leopard on my mini and formatted my drive for XP. When the XP install gets to the blue screen asking where to install, I do not get the options where to install mentioned in the BootCamp instructions, I just get Windows asking what to do (install, repair, quit). I cannot get out of this screen at this juncture. I take out the disc and then I get the "unbootable drive..." message.
    Does anyone experience the same?
    Thanks

    I have the same problem. I don't get an option on which partition to install Windows too, even though I have successfully created a bootcamp partition (as it can be seen in my desktop).
    I only get the 1 partition (which is the Mac partition) to select.
    I only have this problem with my new iMac. I don't have the problem with my Macbook
    Help!

  • Extended desktop option with win xp

    When using bootcamp and winxp (have to because of the software) I am unable to get the 2nd monitor to run (works fine when i boot under mac os) I'm using a macbook pro with the ati 1600x card. does anyone have any ideas about how to enable the extended desktop option (ive been in the display under control panel in winxp and checked the enable this monitor to be used as extended tab) I think it's a problem with the ati driver but don't really know how to about resolving. thanks

    Solved, had to play around with the ATI master screen and specifically "enabling" the right combination of displays.works perfect now in winxp and mac os.

Maybe you are looking for