Photoshop CS2 Issues After Latest Secuirty Update

I am working on a Power Mac G5 with Mac OSX 10.4 and Adobe CS2. I do not know if it was the security update that caused these problems in Photoshop for me, but that was the only thing that had been installed around the time that the problems started happening.
The issue is that when I have the Move Tool and several layers in groups. When I have a layer inside one of the groups highlighted and I want to move it, suddenly PS selects the whole group and moves it as well. I have checked to see if there were any sort of links to the layers and there are not.
It is a weird issue and since this is a work machine it is very important to get PS working again. At the moment I have to work on a Windows machine to get things done.
Thanks for any help that you can give me.

Eric,
Mac OS X 10.4? Or 10.4.11? Or...?
Before running the security update, did you repair permissions? Run DiskWarrior? Try resetting the tool preferences, and/or Photoshop preferences?
Neil

Similar Messages

Photoshop CS2 issue after 0.4.6 update

I used software update to install the 10.4.6 update. was running 10.4.5 before that.
Photoshop now crashes after I save tifs/psds/dcs's. If i use save for web, it does not crash. The files that are saving when it crashes seem okay (good thing!) but it is annoying to have to keep opening, besides what internal damage this process is doing.
Anyone have a fix?
thanks,
brian

I am saving to a Appletalk-mounted volume.
When opening a file from said server, and saving to the desktop, it crashes, too.
When opening from the desktop and saving to the desktop, it does not crash. I guess I am being further forced from working off of the server : (
(I know that Adobe officially does NOT support saving over a network).
Thanks for your help
brian

TC issues after latest firmware update

Here is the skinny, my TC went through the normal firmware update a bit ago. Wednesday my Internet stopped working, when I use the Airport Utility app it showed the TC online, at first, then it gave me the error that the TC did not have a valid IP. Thought might have been a problem on my ISP's end so I grabbed another router and set it up Internet no problem. Has to be the new firmware right so I pushed the firmware back 3 versions, and still the same thing no valid IP but connected to the Internet but no HDD (Yes it said not a valid IP but connected to the Internet on one wireless PC). Everything else in the house would not connect to the TC they could see it but when you went to connect never asked for a password and I got the spindle of death type deal. I saved my settings and did a hard reset with the button on the back of the TC, started over and rebuilt the connection, same thing happened not a valid IP. I have read that Apple released 3 different firmware updates supposedly the last one works, it doesn't when I load the firmware I get the same error TC does not have a valid IP. I need some help, I have cycled through power down and power up situations over and over. Anyone have any other suggestions?

Need some more info.
What is the modem.. make and model?
Is it both modem and router or just a modem?
What is the actual model of the TC.. the number from the base.. A1xxx where the x are numbers.
The latest firmware is an issue.. that is 7.6.4 and you should go back to 7.6.1
But it does seem hard to get rid of properly.
I want you to do a factory reset not just a hard reset.
Universal Factory Reset.. any model TC or AE.
Unplug your TC/AE from power or turn off at the power point.
Hold in reset. and power the TC/AE back on.. all without releasing reset and keep holding in for about 10sec. (this is often difficult without a 2nd person or a 3rd arm).
Release it when the status light flashes rapidly. If it doesn’t flash rapidly you have missed it and try again.
Note..
Be Gentle! Feel the switch click on. It has a positive feel.. add no more pressure after that.
TC/AE will reboot after a couple of minutes with default factory settings and will wipe out previous configurations of the router.
No files are deleted on the hard disk in a TC.. No reset of the TC deletes files.. to do that you use erase from the airport utility.
Please redo the setup using all SMB names.. that is short, no spaces and purely alphanumeric characters.
eg TCgenx (use actual gen if you want) for base station name.
TCwifi for wireless name. (or TC24ghz and TC5ghz which is well worth naming both bands so you can test more carefully).
Please download and install a v5 utility on a computer if any of them use up to Mountain Lion.
Tell us what OS the computers are running and I can tell you how to install the old airport utility.
Test the TC in bridge to your other router is also a good alternative.

Issue after latest security update on WEBCAM via WiFi (MOBIOLA WEBCAM APP)

Hello everyone,
I've used for a long time Mobiola WEBCAM (app that turns one's iPhone/iPad into a webcam via WIFI) in Skype/Viber and video chat sites like Omegle (all done through GOOGLE CHROME), up until yesterday.
As of today, any of my browsers or my Skype?Viber applications on my MAC MINI (late 2012) won't recognize my Video FEED.
I do get a connection between the iPhone/iPAD and the MAC MINI, I see the video working properly on the app (MOBIOLA WEBAM) but the VIDEO is not being "fed/transferred" for some reason to any browser or Skype/Viber.
I've have tried to use the WEbcam on other browsers such as Safari, Firefox and Opera to no avail. I'm simply not able to make it work.
I've uninstalled and reinstalled diferent veriosn of FLASH player, and the problem still persists.
I'm begging to wonder that all this issue has got something to do with the latest MAC OS X security update and nothing with the browsers, adobe flash player/shockwave or application versions.
Is it a adobe flash issue? Mac os x issue? I should I proceed?
Any help is appreciated...
Technical INFO:
Skype version: 6.15
MAC OS X Mountain Lion 10.8.5
iOs: 8.1.1 (on both ipad and iphone)
Google Chrome: 39.0.2171.71 (64-bit)
Thanks a lot,
Chen

I'm certain it's not a network issue. I have two Powerbook G4s. One of these is running Tiger and the other Panther. The G4 running Tiger had 10.4.8 and was recently updated to 10.4.9. This G4 developed problems doing software updates after I did the upgrade to 10.4.8 and it continues to have problems with 10.4.9. My other G4 running 10.3.9 Pather could connect on this network to do updates (even though my G4 running Tiger could not) until recently when I did an upgrade to install a security patch. After installing the security patch on my G4 running 10.3.9, it also could no longer connect to do software updates. When this first occured on my Tiger G4, I trashed the System Configuration file in my Library folder, restarted my computer and was able to do a software update. When I try this now on either computer it no longer works and can't do software updates. I have also trashed my cache file without being able to resolve the problem.

Mac Mail issues after latest Security Update

After installing the latest update my Mail is acting very strange. If I open my Mail app it spins like it is retrieving mail but never gets anything and eventually acts like I am disconnected from the internet, which I am definitely not. In addition when Mail is open my Safari suddenly acts like it is disconnected from the internet, which it is not because if I close Mail and refresh the screen in Safari everything is fine and I can surf anywhere as expected, but as soon as I open Mail again Mail will just sit and spin and Safari goes back to acting like it has no connection.
Anyone else have this happening? Any suggestions? Thanks in advance!

It looks like either something was amiss in your system and installing the update just made things worse, or you didn't install it properly. You should start by verifying/reparing your disk (not just permissions), as described here:
The Repair functions of Disk Utility: what's it all about?
Read the following article for guidelines on how to properly install system updates:
Installing software updates

Photoshop CS2 Error after Leopard Software Update

After installing the software update to fix the Keychain and blah blah blah my PS CS2 will no longer allow me to do ANYTHING. I can open it up and run it, open a file I'm working on and if I try to do anything it gives me an error message saying: "Could not complete your request because of a program error"
Any help? I really dont want to reinstall as it's an upgrade version and I'd have to reinstall CS again.
Thanks,
Mike

First thing I would do is boot from the Leopard Install disk and use Disk Utility to Repair Disk and Repair Disk Permissions.
If that doesn't work you might try deleting the PS CS2 preferences.
Note: Adobe does not require you to re-install the previous version when installing upgrade software, you only have to enter the old serial number.

AOL email sending issue, after latest iphone update

I have updated to the latest os. Now suddenly my AOL emai laddress has stopped sending, recieving is fine. I am alos using the company wifi, which is bt. I have also changed the outgoing mail server settings to smtp.btinternet.com, but still cant send.
Does anyone have any idea that might fix this.
Jeff

no, you need to actually go to your settings and change it to push data rather then fetch it manually.
Settings>mail contacts and calendars>fetch new data>Push should say on.
and if it says its already on, tap it to turn it off, then tap again to turn it back on.
also, www.downrightnow.com you can see how extremely often throughout the day yahoo mail servers are down.

IPad mini will not let me access mail after latest software update, 6.1.2, seems to want me to sign in, but whenever I type my Id ad password it just says that the mail account already exists.. Still can't open my mail!

iPad mini will not let me access mail after latest software update, 6.1.2, seems to want me to sign in, but whenever I type my Id ad password it just says that the mail account already exists.. Still can't open my mail!
Help would be appreciated.

PhotogYogi wrote:
I Have the same issue on a brand new iPad mini 2. My battery is only lasting up to 5 hours. I went on chat with Apple last night and they said my battery is fine and its a Safari issue. I'm literally losing 1% every 3-4 minutes. I tried recalibrating my battery, signing out of iCloud, shutting off all locations, turning off background app refresh, restoring network settings, restoring all, and finally restoring from iTunes with no luck. This is just awful. I got this iPad so I could use it on my long flight for a trip I have coming up, and unfortunately, it's not going to last that long, plus I'm concerned about how many times i will be recharging my battery because of this since battery's do have a life cycle dependent on the number of charges. This is frustrating and needs to be fixed ASAP and addressed by Apple.
By the way, Apple told me to bring my device to the Apple Store because it's still under warranty. That's great and all, but I'm going to waste my time if there is no fix for this issue.
Ok so you want Apple to address the problem, but yet you don't want to take it to them just in case they can't fix it? What if they can fix it? Complaining here certainly won't fix it.

Even after latest soft update i still have apps wating to redownload again on my iphone , what do i do? also i heard i should email apple , whats the address?

even after latest soft update i still have apps wating to redownload again

In over three years, I have yet to have a problem or meet someone who has.
Most never have an issue.
As this is a support forum, designed for those with issues, of course you will see problems here ( many self inflicted). If you visit a hospital, you are likely to see many sick people, even though most are not sick.
It is really up to you, but most users never have an issue.
http://tech.fortune.cnn.com/2010/09/23/iphone-tops-j-d-powers-customer-satisfact ion-survey-for-4th-year-in-a-row/

Safari can't connect after latest Lion update

Just updated my software and now safari can't connect to websites. It connects for a bit then after awhile it will no longer connect. Firefox and Chrome are connecting fine so this is a safari only issue with the latest update.
Safari Version 5.1.5 (7534.55.3)
Quiting safari and restarting works for a little while then eventually 'can't connect to server' eventually appears. I'm going back to firefox until this is resolved.

Linc Davis
Currently Being Moderated Re: Safari can't connect after latest Lion update
Apr 2, 2012 5:35 AM (in response to rtorca)
Please read this whole message before doing anything.
This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
Step 1
The purpose of this step is to determine whether the problem is localized to your user account.
Enable guest logins and log in as Guest. For instructions, launch the System Preferences application, select Help from the menu bar, and enter “Set up a guest account” (without the quotes) in the search box.
While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem(s)?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
Note: If you’ve activated “Find My Mac” or FileVault in Mac OS X 10.7 or later, then you can’t enable the Guest account. Create a new account in which to test, and delete it, including its home folder, after testing.
Step 2
The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. The instructions provided by Apple are as follows:
Be sure your Mac is shut down.
Press the power button.
Immediately after you hear the startup tone, hold the Shift key. The Shift key should be held as soon as possible after the startup tone, but not before the tone.
Release the Shift key when you see the gray Apple icon and the progress indicator (looks like a spinning gear).
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem(s)?
After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of steps 1 and 2.
Hi I have the same sort of problems I carried out the two tests and the problem appears to only be in my profile not in guest profile. Is there a cure?

Using Adobe Photoshop CS2 version 9 and have updated it, but when stacking photos, it comes up with PSD, whereas I want Jpeg, and I change the format to Jpeg and the box then comes up with cannot save as there is a program error. Be very grateful for help

Using Adobe Photoshop CS2 version 9 and have updated it, but when stacking photos, it comes up with PSD, whereas I want Jpeg, and I change the format to Jpeg and the box then comes up with cannot save as there is a program error. Be very grateful for help with this, please.

jpg does not support Layers.
Just to make sure, what exactly do you mean by "stacking photos" and what do you want to achieve thereby?

ITunes won't open after latest OSX update

AFter latest OSX update iTunes won't open. Reinstalled iTunes. Reinstalled OSX update. When I click on icon in applications or in finder nothing happens.

This is what worked for me and others--original post found on this thread: Yosemite slow opening and cannot open itunes
This solved my question by Linc Davis.......
According to multiple reports on this site, Apple Support has given the following instructions to others who had a similar problem. I can't confirm that this procedure works or that it's necessary, but it won't leave you any worse off than you are now.
First, back up all data.
Select the iTunes icon in the Applications folder and open the Info window. Click the padlock icon in the lower right corner to unlock the settings.
In the Sharing & Permissions section, change the Privilege setting for each Name in the list to Read & Write. Close the window. If the settings aren't visible, click the disclosure triangle on the left so that it points down.
You should now be able to drag the iTunes application to the Trash and empty. Your iTunes data won't be affected.
Click the iTunes link at the top of this page, download the installer package and run it.
If iTunes still doesn't launch, or if you can't complete the procedure, reinstall the OS.

Windows 7PC no longer detects iPad 3 after latest itunes update. Why?, Windows 7PC no longer detects iPad 3 after latest itunes update. Why?

Windows 7PC no longer detects iPad 3 after latest itunes update. Why?,

iPad not appearing in iTunes
http://www.apple.com/support/ipad/assistant/itunes/
iOS: Device not recognized in iTunes for Mac OS X
http://support.apple.com/kb/TS1591
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
iTunes for Windows: Device Sync Tests
http://support.apple.com/kb/HT4235
IOS: Syncing with iTunes
http://support.apple.com/kb/HT1386
Apple - Support - iPad - Syncing
http://www.apple.com/support/ipad/syncing/
 Cheers, Tom

Iphone 4 not recognized and will not sync after latest itunes update. I have done all trouble shooting and uninstalled and reinstalled itunes to no avail.

iphone 4 not recognized and will not sync after latest itunes update. I have done recommendedl trouble shooting and uninstalled and reinstalled itunes to no avail. Can I go back to earlier version of itunes or restore computer to fix?

'The installer has insufficient privileges to modify this file C:\Program Files (x86)\Common Files\Apple\Apple Application Support\Web kit.resources\inspector\Images\Spinner Inactive Selected.gif.'
That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
XP instructions in the following document: How to perform disk error checking in Windows XP
Vista instructions in the following document: Check your hard disk for errors
Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards?

Wifi not working after latest iOS update

wif not working after latest iOS update 7.0.4. Any suggestions?

Same happening to my iphone no wifi or bluetooth since latest update tryed everything reset restore reset back to factory setting all to no avail phoned apple they want 155 pound for a replacement (cheeky #$%/$$#@) when everyone knows its there fault .i read phone may need new wifi chip if its out of warrenty cheaper to take to local phone doctor

Photoshop CS2 Issues After Latest Secuirty Update

Similar Messages

Maybe you are looking for