Photoshop cs4 access denied when trying to install from disc in Windows 7 64bit.

Photoshop cs4 access denied when trying to install from disc in Windows 7 64bit. I tried it in
safe mode and it starts to install but get an error there as well.
What do I do?

So when you put the disk in it won't run correctly? When the disk is inserted you should have a window pop up with 2 options. 1 to install and the other to see what is on the disk. Choose to explore or open the disk. Go to the CS4 folder where the photoshop .exe file is (that will run the setup), right click on the .exe file and choose run as Admin and it should start. See if it will install. If not then read below.
I am not sure how far you got in the install before so chances are you will have to run the CS4 cleanup utility. 2 levels to run at but don't use 1 or 2 just type in the number 3.
http://www.adobe.com/support/contact/cs4clean.html
You may need to run the windows installer cleanup utility too
http://support.microsoft.com/kb/290301
Before you try to reinstall the software ensure that adobe reader is not installed. If it is remove it. It has caused issues in the past with vista and CS4 installs.
Also turn off windows Defender and any anti-virus software. You can keep UAC on in Windows 7.
During the CS4 install at 90 percent it will almost stop and may take 5 to 10 mins to finish. This is normal. What a pain huh......
After install is finished, reboot
After reboot, go to the CS4 64 bit or 32 bit icon (depends on 32 or 64 bit Windows 7) in start area, right click on CS4 64 bit (if you have windows 7 64 bit) and choose properties, compatibility tab and then check run as Admin at the bottom area. Hit apply, ok to close out.
Now start CS4 and run the updater.

Similar Messages

  • Access denied when trying to install itunes on windows 7

    when trying to install itunes I get a message access denied. using win 7 i have read that a certain windows update can cause this. can anyone  provide any information on how to fix this?  I've tried to remove this, but in control panel-update history, it say it was installed 08/22. when i look at the list to uninstall it, i don't see it.
    KB2918614

    Go to Control Panel > Programs and Features > View installed updates then search the list for Security Update for Microsoft Windows (KB2918614). You may need to adjust the column widths to read the full titles. Uninstall it if you have it, then reboot and try installing iTunes again.
    If you have further issues see Troubleshooting issues with iTunes for Windows updates.
    tt2

  • Access Denied When Trying To Install Printer - Windows 7

    Good Day
    I have a serious problem on a client's computer. All I need to do is connect the laptop to a network printer, but I am having a lot of difficulty in doing so.
    First the details of the laptop: Windows 7 Professional 64-bit connected to network using ETH cable. Avira Professional antivirus running, firewall disabled on pc, user is member of administrators group only.
    Details of the printer: Xerox Workcentre 3220, connect to network using ETH cable, but also shared on pc also running Windows 7 64-bit Professional.
    I am able to ping the printer and have connected all the other pcs on the network to the printer without any troubles whatsoever. Printing, scanning - everything is working fine for the other pcs. I am also able to connect to shares from the laptop to any
    other pc.
    So here is my issue with this specific laptop:
    Firstly, when using the "Add Printer" wizard, the "Add a local printer" option is greyed out.
    So I tried connecting to the printer using the"Add a network, wireless or Bluetooth printer" option, which seemed to be working, but during installation it gives an Access Denied error and undoes the installation.
    Then I tried connecting to the share of the printer on one of the other pcs, which had the exact same result.
    I then tried to modify an other printer, by firstly trying to add a new Local Port, but the I recieve the following error: "Specified port cannot be added. Access is denied."
    I tried then adding the driver using the Windows Print Server, but the buttons were unavailable.
    After reading on many forums, I accessed the Print Management console (Control Panel -> Administrative Tools -> Print Management)m and tried adding the printer and ports there, but recieved an "Access Denied" error every time.
    Basically whatever I tried, I recieved "Access Denied" errors. I created a new user, which is only a member of the Administrators group. Logged in with new user, without any success in connecting to the printer. I then tried adding security permisssions
    for "everyone" to the folder C:\Windows\System32\spool\PRINTERS, as I read on another forum. I tried modifying the group policy using gpedit.msc and also using the Local Security Policy, although I could have missed some things in these two places,
    but basically with a quick glance, everything seemed fine. I am sure there are no virusses, etc on this laptop and as I have said all the other pcs connected to the printer very easily.
    How can it be that I cant install a printer on this laptop, while I was able to do so a year or so back?
    I have gotten a few suggestions that it will in the end just save me time by formatting the pc and reloading all the data and programs, but this isn't an option I really want to take. And then I have previously had issues with the "Add a local printer"
    option greyed out and unable to add printers, etc, but then I was able to solve the problem by creating a new user and then switching to that user - which indicated a possible user profile corruption. But in this case even that did not work.

    Hi,
    please check your below configuration:
    1.Start the policy editor (Control Panel -> Administrative tools -> Local security policy)
    2.Select “Local policy” item
    3.Find the item “Devices: Prevent Users from Installing Printer Drivers” in the section Security Settings -> Security Options and change it to Enabled
    4.Go to “Security Settings -> User Rights Assignment” section and check, that “Load & Unalod Drivers” option contains the active user group. It important, that even if it has “All Staff” already, it still could miss “Administrators” group, so it’s necessary
    to add it manually.
    In addition, this thread could be referred:
    http://social.technet.microsoft.com/Forums/en-US/8c3c3d97-9d85-4ab0-9fc8-4b7aba202fb2/windows-cannot-connect-to-the-printer-access-is-denied-please-help?forum=itprovistaprinting
    Karen Hu
    TechNet Community Support

  • Error Message access denied when trying to install on SD Card

    Hi,
    I got this errormessage whan I'm trying to install the image about CMD (run as Admin):
    C:\FFUTEST>dism.exe /Apply-Image /ImageFile:flash.ffu /ApplyDrive:\\.\PhysicalDr
    ive1 /SkipPlatformCheck
    Access is denied.
    Does anybody know a solution?

    Are you able to see the SD card in file explorer?  When you performed the diskpart command sequence:
    diskpart
    list disk
    exit
    Did your SD card show up as physicaldrive1?
    Is the SD card either 8 or 16 GB in size and Class 10?
    Also, are you running this command on a Windows 10 install?
    You might check that explorer or cmd don't have a reference to the SD card still.  If a program is accessing the card that might prevent DISM from accessing it in exclusive mode.
    Jonathan Tanner | Microsoft | Windows 10 IoT Core Insider Preview Support | This posting is provided 'as is' with no warranties and confers no rights.

  • I downloaded the 32 bit version of photoshop cc 2014. When trying to install I get the message that installer failed to initialize and that this could be due to a missing file. Has anybody a solution ?

    I downloaded the 32 bit version of photoshop cc 2014. When trying to install I get the message that installer failed to initialize and that this could be due to a missing file. Has anybody a solution>?

    Did you unzip the entire contents of the download zip file onto your hard drive before running the installer?  You need to do that.
    I have installed it myself and it went in just fine.
    -Noel

  • I receive "Database access denied" when trying to add component 4543BD

    I receive "Database access denied" when trying to add component 4543BD to my schematic. This component was added from a previous version. I'm using Multisim version 12.0.0  Student edition.
    Solved!
    Go to Solution.

    Hi Diarra,
    I checked my database and  the  4543 is not in the Student Edition. If you opened a schematic that was created in a higher version such as the Educaiton Edition and copied the part to your database, when you place this part you will get the access denied message. 
    Attached is a schematic with the part, you can open it and build you circuit around it.
    Tien P.
    National Instruments
    Attachments:
    4543.ms12 ‏62 KB

  • HP C6180 (wireless) gives "Ink System Failure" when trying to print from my new Windows laptop

    HP C6180 (wireless) gives "Ink System Failure" when trying to print from my new Windows laptop

    Hi @Maxuss,
    Thank you for visiting the HP Support Forums! I see you are getting an 'Ink System Failure' on your HP Photosmart C6180, so you are unable to print. 
    Please complete the steps listed here: An 'Ink System' Error Code Displays on the Front Panel
    If after the reset you are still getting the error message, please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region.
    http://www8.hp.com/us/en/contact-hp/ww-phone-assis​t.html
    I hope this helps!
    HevnLgh
    I work on behalf of HP
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

  • Creative suite 6 install says genuine software verification failure when trying to install from a genuine disk

    When trying to install a genuine copy of creative suite 6 from disk, i keep getting the message that the verification failed and that the copy is counterfeit.

    Hello sonic3,
    please try to use download function from there: http://helpx.adobe.com/de/x-productkb/policy-pricing/cs6-product-downloads.html
    and use your serial numbers aso. from your disk.
    Maybe it's necessary to delete first  all the rudiments from your former installations.
    Hans-Günter

  • Photoshop CS4 shuts down when trying to Print

    Good day we installed a new network print driver and now Photoshop CS4 quits when you try to print with the following error
    Event Type: Error
    Event Source: Application Error
    Event Category: None
    Event ID: 1000
    Date: 4/1/2009
    Time: 3:18:08 PM
    User: N/A
    Computer: AMYS
    Description:
    Faulting application photoshop.exe, version 11.0.1.0, faulting module ntdll.dll, version 5.1.2600.5512, fault address 0x0001b1fa.
    For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
    Data:
    0000: 41 70 70 6c 69 63 61 74 Applicat
    0008: 69 6f 6e 20 46 61 69 6c ion Fail
    0010: 75 72 65 20 20 70 68 6f ure pho
    0018: 74 6f 73 68 6f 70 2e 65 toshop.e
    0020: 78 65 20 31 31 2e 30 2e xe 11.0.
    0028: 31 2e 30 20 69 6e 20 6e 1.0 in n
    0030: 74 64 6c 6c 2e 64 6c 6c tdll.dll
    0038: 20 35 2e 31 2e 32 36 30 5.1.260
    0040: 30 2e 35 35 31 32 20 61 0.5512 a
    0048: 74 20 6f 66 66 73 65 74 t offset
    0050: 20 30 30 30 31 62 31 66 0001b1f
    0058: 61 0d 0a a..
    On some systems I can set the defualt printer to another printer and when I print I then select the printer I want to print too, wiht no issues but if the printer in question is the default printer then CS4 just crashes. The Printer is a Ricoh 3260C. The printer is a network printer connected to a print server. Users have Admin rights on the local PC. If anybody has any ideas on this problem I could use some help. I have removed and reinstalled driver a few times with no luck. Even tried going back to old driver as well still no luck. All other adobe products seem to work fine.
    Thanks
    Adam Raff

    Thanks for the help John but the problem is not that simple. One of my users now has no printer loaded when he starts Photoshop. when he starts it it says please install print drivers. I have uninstalled photoshop with no luck. Since this printer is the primay printer for the Art department I need it to print to that printer. I am using a standard PCL5 driver which is from 2008. there are no newer drivers I have also found that if I change the orientation (portrait or landscape) of the print then it will also print fine. If anybody has any ideas please let me know
    Thanks
    Adam Raff

  • Access Denied when trying to access shared folders on the server with administrative privileges

    I have problem accessing shared folder on the server machine from Windows 7 machine even if I try to access it with administrative privileges (server Administrator account). I will try now to explain better my situation.
    In my company, we have small network infrastructure with one main server machine (HP ProLiant server) with Windows Server 2012 R2 installed and couple of desktop machines. The network is administrated by me.
    On Windows Server we have installed and setup DHCP, DNS, Remote Access and Routing, File and Storage and Active Directory services. Desktop machines are having Windows 8.1 Pro, Windows 8.1 or Windows 7 Home Premium installed on them. In Active
    Directory I have created domain, User groups and Users for employees in my company and so far, I didn't added desktop machines to the domain.
    Also, I've created one folder on the server which should contain different projects data for network users and I have set access permissions and security for this folder and shared it on the network (I've added couple of users to one user group and I
    gave Full control to this group over this folder). When I try to access this folder from network, I've been asked for login credentials (normally), where I just type in one of users username and password who has been given access permissions to (who is member
    of group with full control over the folder). From Windows 8.1 Pro and Windows 8.1 machines I can access and work on this folder without any problems.
    The problem comes with Windows 7 machines. On Windows 7 machines (I have also tried this with Windows 7 Ultimate in VMWare) I can access server, I can see its shares, but as soon I try to access folder I've created for projects, I get Access Denied message
    with request for User login credentials. Whichever user account I use (even servers main Administrator account) I keep getting this message over and over and I'm unable to access it at all.
    I have also tried to access the server through VPN (from local or outside) but I'm getting the same error again. Also I've tried to add these Windows 7 machines to the domain and login with domain user but the result is the same. Turned off both firewalls
    (on server and desktop machines, which I know is unnecessary, but lets try it), still same case. I've tried couple more things with registry editor on desktop machines which I found on different forums and websites but still no luck. And now I don't know
    what else I can do.
    Does anyone knows what's the problem here, have I set something wrong, have not set something I should?

    Hi MeipoXu,
    thanks for your response. I will first answer on your question.
    Yes, the main issue is that we can see the folder when we access the server but we cannot access its contents from Windows 7 machines. I have tried on two machines, one with Windows 7 Home Premium version and the other one with Windows 7 Ultimate version
    and the situation is the same.
    As you recommended, I've checked Network Discovery and File and Printer Sharing and the situation is next: File and Printer Sharing is turned on all layers (Private, Public and Domain) while Network Discovery is off for all layers too. I don't know if this
    is normal thing but Network Discovery cannot be turned on in Windows Server (I'm able to select Turn on Network Discovery and apply the changes, but when I get back to this settings page, I again see that it's turned off, so I assume this can't be changed
    at all).
    I also tried with icacls in command prompt and everything seems to be ok there regarding permissions. Share permissions are set to Full control to Everyone and Security permissions are set to Full control only for Administrators and the user group I've created
    for employees in my company. The confirmation for this is that on Windows 8 machines you can access this folder without any problem and without getting any message connected with access permissions with any user account within this user group. This share is
    created through File and Storage Services service in Server Manager panel.
    And then something came up on my mind. I went in Server Manager to check shared folder settings in File and Storage Services and under Settings page I saw that "Encrypt data access" has been enabled (I enabled this option because I thought
    I will get more security with this option). I asked my self what would happen if I disable it, tried it and now everything works ok on Windows 7 machines too. Now I assume that Windows 7 doesn't have this feature implemented or there are some
    settings which needs to be set on Windows 7 machines to make this encryption thing work with Windows Server. So basically, I will let this feature off for now until I find out more about it and how to implement it to work with all operating systems.
    I want to thank you once more for your kind help!

  • Access denied when trying to use PDF printer as normal user

    I have Acrobat 8 professional installed on a computer running Windows XP SP3. When i try to print a document to pdf from any program as Administrator it performs just fine. When i log on as a normal, restricted, user i get the window popup asking for a file name and location and whereever i try to save a file i get "access denied" error.
    Users have right to write and modify in all of the folders i've tried to save to (desktop, my documents, custom made folders), but i think the problem is with the temp file being written to some system folder where restricted users don't have permission to write. Did anyone encounter a similar problem, and how did you solve it? What directories do the normal users need access to in order to perform printing.
    Thank You

    The forum added some nice links and i found my answer here http://forums.adobe.com/message/1179199#1179199 - changed the registry key permissions and it's working like a charm. Thank you.

  • HELP! Password Expired & Must Be Changed but Access Denied when trying to do so

    Hi,I have an HP 5740e thin client and for some reason the local user account is requiring a password change.  Yet, when I try to change the password it says Access Denied.  And further, I can't get it to allow me to switch to a different account like Administrator to login.  I've held down the SHIFT key when booting, but it still goes straight to that local user account & the expired password prompt. I'm stuck in an endless loop and don't know how to get out of it.  Safe Mode puts me into the same situation.  And I can't update BIOS because I can't get in at all. OS = Windows Embedded Standard 7 I've also tried to reinstall the latest image off the HP website using a USB drive but it fails every time. I've tried 2 different USB drives with same exact error no each.  Image trying to install = SP56020ERROR:  An unexpected condition occurred Does anyone have a suggestion?

    I was finally able to get in as Administrator using RDP from my desktop.  I didn't realize that the thin client name was missing a digit so that's why I was unsuccessful prior to this. Once I got in remotely, I was able to look at the permissions for the local user account.  Now I see what was wrong.[Checked]      User cannot change password[Unchecked] Password never expires I still don't know why I couldn't install a new factory image, but at least I'm now able to work with this unit.  I also disabled the auto login for now. Sorry to have littered the Forum!  

  • Access Denied when trying to open a file that is encrypted on network share with EFS

    I just recently enabled EFS on the default domain policy and created a new network share, encrypted a file and added myself to that file and tried to open the file from my workstation.  I then receive an error "Access denied", I also tried
    to create a file and encrypt it on that same share and get an error "The requested operation cannot be completed.  The computer must be trusted for delegation and the current user account must be configured to allow delegation."  
    My steps.
    1. Enable group policy for EFS, removed the expired certificate that was already there and Created a new Data recovery agent.
    2. Created a network share, created a test file, enabled encryption on the file 
    3. certmgr.msc, personal and requested a new certificate, Basic EFS
    4. On the network share and properties of file, advanced, details and added the user
    5. from the workstation tried to access the file, Access Denied.  I can create any file I won't just can't add attributes to encrypt the file or open an encrypted file
    Now if I go to the server where the CA is located which is also the AD server and create share and run the same process it works as expected.  I'm guessing I have to export the cert from the CA server as a pfx and import that to both the server that
    has the network share and the workstation but that still doesn't seem to work.  Maybe I don't understand how EFS works and this is not possible?  Any suggestions would be appreciated.

    You are correct in not understanding how EFS works.
    When you connect to an encrypted file via a network share, the encryption/decryption takes place *on* the server. To enable over the network access, the server's computer account must be trusted for delegation.
    The server actually impersonates the user and creates a user profile on the server (containing the defined EFS certificate and private key). The important thing to remember is that the files is transmitted in clear text from the server to the client.
    See http://blogs.technet.com/b/instan/archive/2010/08/11/remote-efs-decryption-and-trusted-for-delegation-requirements.aspx
    Brian

  • ACCESS DENIED when trying to use custom site template to create new Subsite

    I am trying to create a new site using a custom template. I am the new admin here at the company. Other also are having "access denied" errors when trying to create the site using these custom templates. 
    However I can still create a site using the out of the box templates. I have given myself site collection admin (primary) and I am a farm administrator as well. Any ideas on why I keep getting access denied to specific templates?
    The entire site collection is using the custom template. When I try to create a new site under the site collection with a custom template now, it says "access denied". Any ideas?
    Thanks!
    Note - I am able to use the Custom Site Templates in the test environment without any issues. Only in the production/live environment am I getting the access denied error.

    I am not finding anything that comes up in the ULS logs about the access denied. I tried creating the site in the test environment using the custom template and it worked. I go to the production environment and try to create the site with the same template
    and get "error:access denied - current user domain\user" I checked in the ULS logs as soon as the access denied appears (pretty quickly after pressing create) and there is nothing at that specific time. This is a huge problem, is there any way to
    work around or fix this? I'm a new admin.

  • Why do I see a directory access message when trying to install iTunes?

    iTunes won't install. I first got this error when trying to update to 9.2: "Error writing to file C:\Program Files\iTunes\iTunes.Resources\it.lproj\TVShowsIntro.nib\objects.xib. Verify that you have access to that directory." I then tried to uninstall and reinstall and I keep getting the same error during the 'copying files' part of the install process. Can someone please tell me how to fix this issue? Thanks.
    gpshaffer

    That's consistent with disk/file damage.
    Let's try running a chkdsk over your C drive. There's instructions and a guided help in the following document.
    Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk r/ (depending on how you go about this):
    [How to perform disk error checking in Windows XP|http://support.microsoft.com/kb/315265]
    Does the chkdsk find/repair any damage? If so, try another install. Does it go through properly this time?
    Message was edited by: b noir

Maybe you are looking for