Photoshop CS4 Photomerge doesn't work under windows 8.1

Hello!
I have Photoshop CS4. Whereas it worked very well under Windows XP SP 3, I have a problem using it under Windows 8.1.
Photomerge doesn't work. As soon as I click on it, It shuts down Photoshop.
I have a trial version of Photoshop CS 5 and photomerge works well in this version.
I tried to solve the problem through Windows but it didn't work.
Please help.
Thank you.

Hi @inetdude
Since there is no full feature software and driver for 8 or 8.1, I am not sure what else to suggest other than for you to reach out to Microsoft. The driver you are using is an in-OS driver, perhaps they can help you.
Microsoft Community
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

Similar Messages

The ADF Mobile preview pane doesn't work under Windows 8.

The ADF Mobile preview pane doesn't work under Windows 8 64bit even I use Jdeveloper version 11.1.2.4.0,but I use windows 7 64bit or windows xp works fine.
How to fix it, please.
Thanks !

Hi,
I installed JDeveloper 11.1.2.4 on my Windows 8 machine and then the ADF Mobile extension. I can open the previewer for ADF Mobile. So there is no problem with this on Windows 8. I used the generic installation, which is that I installed the JDK and then run the Java -jar command for the JDeveloper install.
Frank

CS4 Photomerge doesn't work

Photomerge doesn't work for me when I am trying to run it from Bridge or from Photoshop. Photoshop stitches the images but when the process is done the document closes, resulting in no image.
The same issue has been discussed in this thread, but no solution was provided:
http://www.adobeforums.com/webx?128@@.59b830ed
Purging the selection / folder cache in Bridge prior to merging doesn't help.
Resetting the PS preferences solves the problem but only temporarily. The issue appears again when you try to make up another panorama.
At first I tried it on 4 RAW shots. Then on another set of 6 RAW shots. No luck.
SCRATCH DISK: 1 Tb
SYSTEM SPECS:
Operating System: Windows Vista 32-bit
Version: 6.0 Service Pack 1
System architecture: Intel CPU Family:6, Model:10, Stepping:4 with MMX, SSE Integer, SSE FP, SSE2
Physical processor count: 4
Logical processor count: 8
Processor speed: 2666 MHz
Video Card Vendor: NVIDIA Corporation
Video Card Renderer: GeForce GTX 260/PCI/SSE2
Built-in memory: 3060 MB
Free memory: 1161 MB
Memory available to Photoshop: 1589 MB
Memory used by Photoshop: 70 %
Thank you
Panos Efstathiadis
www.PanosFX.com

Here are some more things I can think of to try experimenting with in case you find a combination that works. The main idea is that there is a resource issue that Photoshop is not gracefully handling.
Does it even work if you stitch a couple tiny images, and then what is the number or size of images where it starts to fail consistently, and then can you vary things related to resources where it starts to work with a larger set of images that used to fail, before?
Try changing the amount of memory available to Photoshop in Preferences, where smaller seems like the direction you can go from what you've posted.
Try changing your scratch disk to another drive, perhaps even the program drive and/or the system-boot drive. It's unlikely it's running out of 1TB but maybe something about that particular HD is causing a problem.
Watch the amount of memory used by Photoshop in TaskManager and see if it fails when the amount of memory used passes a certain threshhold. Select both Commit Size and Working Set as types of memory to track in the process view, and also watch the total memory used by the system in the Performance tab.
If there is a BIOS setting when you boot your computer for how much memory your video card uses try changing it.
The memory size being a multple of 3GB seems like an uncommon amount. Maybe take one memory chip out so it is a multiple of 2GB. Only do this if you are comfortable mucking around with your hardware and use proper static-reduction techniques, etc.
Try reducing and expanding the number of history states Photoshop keeps track of using Preferences.
You don't say anything about OpenGL settings, so I assume your card doesn't support it? If it does, try turning it off or try turning it on if it's off but can be used.

Double Display on Imac doesn't work under windows, there's a solution?

Hi, I'm a mac user who needs windows for certain applications, so I've installed it with bootcamp on my Intel based Imac 20''.
It's very useful for me having 2 monitors to work also in windows, but there's a problem: when I boot under windows the imac transmits the signal (I can go over the main monitor with the mouse) but the 2nd monitor doesn't receive the signal and remains black!
Everything is tested and works properly on macos, so there's a possible solution?
Thanks
Davide

Just an idea for you. There is an entire Apple Discussion forum dedicated to Boot Camp and Windows XP.
Whereas, not everyone here with an Intel iMac has installed, tried to install or has experience with BC & XP, everyone there has or at least has an interest. You may attract help more quickly there.
The Forum is at the bottom of the main Apple Discussions page under Windows Compatible Technology.
Here is a link;
Forum: Boot Camp Public Beta

HT5219 Thunderbolt port devices and ethernet cables doesn't work under Windows 7 or 8 via Boot Camp unless I restart my computer... how are the apple developers so dump to not realize this mistake

How can you not resolve a problem so essentail related to swapping thunderbolt devices when running bootcamp? Everytime I diconnect a thunderbolt device, I have to restart in bootcamp for the mackbook pro to recognize it. Considering that I apid ~$3K for this laptop when I could have got a dell for half the price, it such a poor technology. How can apple developers be so dump that they didn't design a drive to resolve the issue... and to make it even more dumber, they acknowledge it ... hello any one with brains after steve jobbs passed away there!!!

I don't have a Thunderbolt machine but according to this article, Windows doesn't support Thunderbolt at all. That means Apple had to add Thunderbolt support in order for it to work even as it does. How would a Dell have solved your problem?
http://www.zdnet.com/more-thunderbolt-on-windows-compatibility-lessons-for-mac-o wners-7000021314/

SAP MI 2.5 (+CrEme) doesn't work under Windows Mobile 2003 Second Editon

While testing our new Hardware (Dell Axim X30 with Intel PXA270-CPU and Windows Mobile 2003 Second Edition (4.21.1088)) i noticed, that the SAP MI Client Software will not work at all!
Setup says "The program you have installed may not display properly because it was designed for a previous version of Windows Mobile software."
But this doesn't seam to be the Problem, because whenever you install an application that hasn't been updated to be compatible with the Second Edition, this dialogue box pops ups. (Reason: The new Landscape-Mode - Our device runs in Portrait-Mode)
...Ok, after tabbing "OK" at this Dialogue, Setup continues! Same procedure at the CrEme-Installer!
After Soft-Resetting, the PocketPC shows up the Message that CrEme is starting up, but it doesn't listen it's Port on the PDA!
You get a Timeout when trying to load the MobileInfrastructure via the Link at Startmenu.
Also the InternetExplorer crashes when opening a webpage with an Java-Applet. Don't know if IE crashes on Windows Mobile 2003 First Edtion, but i don't think so...
Of course the SAP MI 2.5 works on the First Edition!
Anyone knows this problem and when can we expect a Solution?

Hi all!
I found out that CrEme crashes after executing on Windows Mobile 2003 2nd Edition!
Just start the CrEme-Console ("\Windows\CrEme\bin") and type "java" into the Console, it crashes immediately after printing some Messages.
The window disappears too fast to guess what it says...
BTW: On PocketPC 2003 (1st Edition) it doesn't crash!
So it seams we need a new CrEme (or other VM??) for Windows Mobile 2003 2nd Edition!
Any ideas?
Thanks in Advance,
Markus

Hp PSC 500 - scanner doesn't work under Windows 8.1 64-bit

I have a HP PSC 500 printer/scanner but scanning does not work.
My PC is a Windows 8.1 64-bit system - and I connected the printer/scanner to the PC with a parallel/usb adapter cable. Printing is OK but no scanning... Printer/scanner shows a message "no connection to PC" if I try to scan.
I have all the updates of Win8.1 - so the system is up to date!

Hi @inetdude
Since there is no full feature software and driver for 8 or 8.1, I am not sure what else to suggest other than for you to reach out to Microsoft. The driver you are using is an in-OS driver, perhaps they can help you.
Microsoft Community
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

My web.dll file doesn't work under windows 7 or 8 64 bit

Dears,
i hope to find you all in good health,
i have developed my own dll using C# 2010, in order to use
it under web (IE) i also developed web.dll in order to call my application dll, anyhow i have 2 version of web.dll because i already have 2 version of my software 32, and 64,
anyhow the 32 bit version is working fine after i register (regasm) the web.dll but the 64 version didn't work,
i tried to debug the issue it seems like the link between the web.dll and the browser is not working at all
any help or suggestions would be highly appreciated.
regards

This forums supports setup of the .NET Framework.
For best help with your web project configuration issue, I suggest this forum:
http://forums.asp.net/26.aspx/1?Configuration+and+Deployment

My Adobe Photoshop Elements 6 doesn/t work under Vista Home.

Please help me.
Hylke

Thanks for the quick attention.
After installing as an administrator, straight from the DVD, in english language-instead of Dutch- it succeeded.
The language in the program is, unbelievable, in Dutch.
Thanks for Your offer to help me.
Yours sincerely,
Hylke de Graaf

Satellite A210 (PSAEG) - Microphone doesn't work on Windows 7 64bit

Hello, the micro doesn't work under windows 7 64 bit, the driver I'm using is Windows Vsta 64 bit. The volume is set up maximun and so is the amplification but no way to make it work with skype or toshiba camera assistant software.
Can anyone help me?
thank you

Hi Largo09,
Usually you have to install the webcam and sound driver to get the microphone working. The microphone is a part of webcam
As you wrote, Satellite A210 is not Windows 7 64bit supported so the only option you have are Vista 64bit drivers
In my opinion you should check if Microphone is enabled in Windows sound settings. There you can also enable Microphone boost, that can increase the microphone volume.

Edit in Photoshop from Lightroom doesn't work; Automate Photomerge doesn't work

Edit in Photoshop from Lightroom doesn't work.
It opens the Photoshop application with all the menus/windows, but it never opens the actual image I chose to work on.
Likewise, I also can't automate>Photomerge ... I pick all the images for the PHotomerge and hit "okay," but nothing happens. Makes me think it's Photoshop, not Lightroom, that is all wacky.
I'm on a Mac, using OS X Yosemite, 10.10.1 Lightroom is version 5.7 Photoshop is CS5, version 12.0.4
I uninstalled Photoshop CS5 and reinstalled. No change. I also tried dumping PS preferences, but that didn't affect a thing, either.

None of my "Edit In" worked with the pictures in Lightroom for a particular folder. I expanded the 2014 folder and found that two subfolders had a "?" in front of the 2014-07-04" and another. In other words, the folder was missing. After I found the missing folders using the Lightroom "Find Missing Folder" option, I was able to use the "Edit In" menu item. The 2014 folders weren't expanded at first, so I didn't see the ? marks in front of them. With the missing folders, Lightroom's "Edit In" option was basically telling me there was no picture to "Edit In." Howerver, I have Previews and Smart Previews made when I import picture files into Lightroom. So, the "pictures" showed in the slide strip on the bottom, and also in the display in "expand," but it was actually only showing the previews I had built, not the actual missing pictures in the missing folders. I had accidentally moved some directories using Windows Explorer, and I didn't realize my "happy fingers" moved them outside of Lightroom. Of course, Lightroom has no way of knowing I moved them, and just shows the "?" before the missing folder name. After expanding the root folder, then knew what to do. Fixed it easily. It was frustrating, and took about 20 minutes to see the problem. And that fixed the greyed-out "Edit In" Photoshop CC 2014, and all the other plug-ins were greyed out too.
Hope this fixes your problem.
Mike

Does photoshop 12 works under windows 8.1

Does A dobe Photoshop Elements 12 work under Windows 8.1? When I try to install it, there is a message "The file archive part of Adobe... is missing" Please help

Please post Photoshop Elements related queries over at
http://forums.adobe.com/community/photoshop_elements

Will Photoshop 7.0 work under Windows 7?

Will Photoshop 7.0 work under Windows 7?

To get Photoshop 7.0 (or 7.0.1 in my case) to work under Windows 7 64-bit, I ran the CD's Autorun under Windows XP service pack 2 compatibility. I also set the same compatibility prefs in Win 7 for the setup.exe file in the Photoshop directory of the CD-ROM.
You'll possibly encounter an error about the scratch disk being full - this is because PS 7 fails to understand big hard drives (the huge free space number looks like an empty disk, it's kinda like a Y2K problem, since PS7 programmers or the API writers never imagined so much free space, I guess). In this case, two things are important:
You need a partition that's less than 1TB (not sure about the size, it's in another thread) for the scratch disk. I used my system's recovery partition (only 2GB free, however). Other advice I found was to create a scratch partition using Windows 7 partitioning. Maybe a USB key would work? Surely not very fast...
PS 7 will fail on startup with the "scratch disk full" error and exit. To get PS 7 to allow you to specify it, hold down CTRL and ALT when the program is launching. You'll be given a chance to indicate the partitions.

LiveCycle ES 8,2 JBoss : will it work under Windows PC 2007

LiveCycle ES 8,2 JBoss : will it work under Windows PC 2007 virtual machine? (Turnkey or non turnkey version)
Thanks
Yog

great - another few hundred pounds I'll have to spend..... thanks adobe... more profit for you... but here is another question what about cs4? is that compatible with windows 8 as I have a web standard version, what ever that means but I dont have photoshop for CS4 as I got it for the web desing ...and there no chance of using your cloud thingy 'cos I aint spending $50 a month !!!!
can anyone suggest what I should do - I have my original Photoshop 6, then I purchased CS2, following that I got CS4 Web standard as I was doing a Dreamweaver course and the CS4 came as part of the course but with no photoshop. Now I use adobe bridge and photoshop extensively, these are the 2 I realy want and with Cs2 it worked great as it upgraded Photo 6 to cs2 and I got Bridge NOW I GOT NOTHING !!!! how frustrating

Photoshop CS4 32 bit settings work for 64 bit version?

Anyone know if Photoshop CS4 32 bit settings work for 64 bit version? I just installed Windows 7 x64 and I want to use my backup Photoshop CS4 settings from the 32 bit version. Will there be any problems?
Also, it seems that since I'm on 64 bit Windows 7, the installer forces me to install the 64 bit version of Photoshop CS4, although the 32 bit version is optional. Are the 32 bit settings stored in a different location from the 64 bit version? Or will both version use the same settings from the same place?

I think you are misunderstanding me. The sharing happens via the user home directory (C:\Users\[You]\AppData\Roaming\Adobe ...). 64bit specific settings will be denoted with an X64 in their file name, 32bit settings will be without any extra tags. Beyond that, the programs do not access each other's program directory, which shouldn't be required in the first place, as the default templates are the same for both to begin with. You can of course also copy your brushes and presets to the program directories, but then you will have to worry twice about keeping them in sync.
Mylenium

Photoshop CS4 Photomerge doesn't work under windows 8.1

Similar Messages

Maybe you are looking for