Photoshop CS5 - colour settings in Print menu not working after update Mac OSX maverick

After upgrading to Maverick OSX on the iMac printing from CS5 via Epson R3880 is not working correctly. In Print Settings menu the drop downs for Colour and Colour Settings are greyed out. I already re-installed PS and installed the new drivers from epson. Any ideas?

but after choosing PS manages color, the options in the print menu for choosing color (color or b&W) and color settings are not available anymore. They used to be the last three years I printed with photoshop/epson 3880.
Instead they are greyed out now.
attached screenshot:
Op 30 mei 2014, om 01:47 heeft Chris Cox <[email protected]> het volgende geschreven:
Photoshop CS5 - colour settings in Print menu not working after update Mac OSX maverick
created by Chris Cox in Photoshop General Discussion - View the full discussion
If Photoshop managed color, then the controls in the printer driver are supposed to be grayed out - that's how Apple specifies drivers to work (because only one party should be managing the print color).
So what you're describing is perfectly normal.
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at https://forums.adobe.com/message/6420209#6420209
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
To unsubscribe from this thread, please visit the message page at . In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Photoshop General Discussion by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

Similar Messages

  • Printer will not work after update to Mavericks

    I have a macbook pro and an HP7280 printer connected wirelessly.  After upgrading to Mavericks the printer will not work.  The first time I used it the system upgraded automatically (I forget what it said but it just went ahead and did some upgrading)  When I clicked on something to print it did recognized the printer but just scrolled and scrolled and never printed.  So I deleted the printer and reset the system and then added the printer back on - same thing.   Any ideas??

    It means there is no issue with the driver you are using and with it working correctly on Mavericks. So you have a network issue with the printer queue you are using. Normally a reset of the printing system and re-adding the printer would be enough to get things working again. But since you have done this and your issue is not resolved, there must be some other gremlins in the system.
    With the HP connected to the network, if you know its IP address you can enter this as a URL into a web browser. This should result in you connecting to the internal web page of the HP. Does this work?

  • Mac Menu not working after updated to 10.6.2

    Strange behavior after I updated my Macbook 13" to Snow Leopard 10.6.2. Whenever Apple own software crash (not responding), e.g. Finder, iTunes, iPhoto etc, all the functions under the Apple icon (top right) in menu bar no longer work. As such I can't shutdown or restart my mac. Pressing the power button will not work as well. I either have to force shutdown (press the power button for few seconds) or use terminal to fire "sudo halt" command to shutdown, which takes longer than usual to shutdown, few minutes. In fact after I updated to 10.6.2, Apple software is prone to crash. Running disk utility repair disk permission and repair disk does not fix any of the above problem. I am reluctant to do a fresh install. Anyone facing the same problem? Any solution? Or should I wait for the next update release?
    Please help.

    HI,
    *"repair disk does not fix any of the above problem"*
    If Disk Utility reported errors, did you repair them?
    Insert Installer disk and Restart, holding down the "C" key until grey Apple appears.
    Go to Installer menu and launch Disk Utility.
    Select your HDD (manufacturer ID) in the left panel.
    Select First Aid in the Main panel.
    *(Check S.M.A.R.T Status of HDD at the bottom of right panel. It should say: Verified)*
    Click Repair Disk on the bottom right.
    If DU reports disk does not need repairs quit DU and restart.
    If DU reports errors Repair again and again until DU reports disk is repaired.
    When you are finished with DU, from the Menu Bar, select Utilities/Startup Manager.
    Select your start up disk and click Restart
    While you have the Disk Utility window open, look at the bottom of the window. Where you see Capacity and Available. *Make sure there is always 10% to 15% free disk space*
    Might be a good idea to run the Apple Hardware Test just in case, go here.
    http://support.apple.com/kb/HT2684
    Try downloading and installing the 10.6.2 combo update here.
    http://support.apple.com/kb/DL959
    Then repair disk permissions.
    Quit any open applications/programs. Launch Disk Utility. (Applications/Utilities) Select MacintoshHD in the panel on the left, select the FirstAid tab. Click: Repair Disk Permissions. When it's finished from the Menu Bar, Quit Disk Utility and restart your Mac. If you see a long list of "messages" in the permissions window, it's ok. That can be ignored. As long as you see, "Permissions Repair Complete" when it's finished... you're done. Quit Disk Utility and restart your Mac.
    Deleting the com.apple.systemiuserver.plist file should fix the Status Menu Bar issue as "donv (The Ghost)" suggests.
    One last thing... please click My Settings on the right side of this window and update your forum profile. Thanks!
    Carolyn

  • My printer is not working after update

    I have a HP Photosmart C4700, which was purchased when I bought my Mac. Since I ran the last recommended update, my printer will not print. It says it is offline. Any help?

    Sometimes resetting the printing system can sort out the problem:
    http://support.apple.com/kb/HT1341

  • Printer & scanner not working after updating to 10.6.6

    Canon ip4500 printer no longer recognised by computer since I updated to OS 10.6.6. Tried deleting & adding it but it cant find printer. No drivers to update either. Tried disconnecting & connecting via USB. Nothing is working. Same with scanner that I use with Vuescan. Help!

    fenmax wrote:
    Canon ip4500 printer no longer recognised by computer since I updated to OS 10.6.6. Tried deleting & adding it but it cant find printer.
    "Can't find printer" may be the operative phrase here. How is the printer connected, and what happens if you unplug it and plug it back into that connection?
    No drivers to update either. Tried disconnecting & connecting via USB. Nothing is working. Same with scanner that I use with Vuescan. Help!
    This is sounding more and more as if it's hardware, and USB to be specific, assuming that both devices connect via USB. Are you having any other connection problems? What happens if you change the port you're connected to? Are you using a hub, and if so, is it a powered hub? If you're using a hub, what happens if you plug the device directly to the Mac?
    And, oh, yeah, one more thing: what happens if you reboot the Mac?

  • Disk Utilty does not work after update to OSX 10.8.4

    I updated to OSX 10.8.4 on my Macbook pro and the update went smoothly.
    However when I try to run Disk Utility the utility never starts and the right click menu says it is not responding. I have to force quit.

    You would need to download and run again the OS X Mountain Lion Update v10.8.4 (Combo).
    Go to: http://support.apple.com/kb/dl1659

  • HT3669 Printer/ scanner not working after update driver

    Since the last Friday printer driver update, my HP Photosmart C6180 is not scanning any more.
    Also the wifi printing is unavailable.
    Anybody else experiencing this?
    Any suggestions?

    Thanks for your help.
    In the meantime I did a reset of all my printers (same printer, but in different configurations) and defined them all again.
    It does not go as smoothly as before, but it's workable.
    Apple should not update these drivers without testing or give a warning how to handle these.
    It means a lot of extra time and work for no reason.

  • Wireless printer does not work after update

    I have VM fusion running on my MAC with a wireless printer enabled on my MAC. Prior to the security update, the printer worked seamlessly. Since the update, I can no longer "see" the printer in Windows XP. Any suggestions?

    More information.
    Wireless Connection Problems - Fix
    Wireless Connection Problems - Fix (2)
    Wireless Connection Problems - Fix (3)
    Wireless Connection Problems - Fix (4)
    Wireless Diagnostics - About

  • Print size in Photoshop CC does not work after updating

    Print size in Photoshop CC does not work after updating, it was working fine before but now when I click to go to print size either from the menu of right chicking when the hand tool is selected, the image just zooms right out until it is a tiny little box in the centre of the screen, no good what so ever, as I say it was working fine before the update.
    I am using window 7 with 8 gb of ram and an I7 with a 1GB graphics card.
    Can anyone help please?
    thanks
    Fujibill

    Check the Image>Image Size and see what the print size is supposed to to be for the open document.
    Also, resetting the photoshop cc preferences might fix it.
    http://forums.adobe.com/thread/375776?tstart=0

  • HP Photosmart C6300 printer/scanner not working after Snow Leopard install

    HP Photosmart C6300 printer/scanner not working after Snow Leopard install
    Reinstalling etc does not work - does anyone else have the same problem or a clue as to how to fix this?

    Keith,
    I got a C6280 and the scanner does not work anymore. I am for 6 days in contact with HP. The last printer driver install form the apple web site does not open the image of HewlettPackardPrinterDrivers.dmg because of an invalid checksum. The skipping of the validation gives and error in the install.

  • My new iPad sound is not working after updating to ios 6.1

    My new iPad sound not working after updating to ios 6.1. Headphones are working fine. I tried all the troubleshoot. can anyone know the answer, plz share with me

    Hi,
    I have exactly the same issue as everyone above. I only get sound through the slider on the ringtone in settings and through my headphones. I do not get any sound anywhere else at all.
    I Have tried:
    - Updating to iOS 6.1.3
    -re starting the device
    -checking that the device is not muted. My slider switch is set to mute rather than lock and is unmuted.
    -going into general settings and reset all settings
    -the device reset several times (waiting until I saw the all important apple logo)
    -removing the last few apps I installed.
    Nothing at all has worked, please help!
    New iPadiPad

  • 3G is not working after updating to iOS 6.1

    My 3G connection is not working after updating to iOS 6.1. I have tried all possible solutions like resetting the network, restarting the phone etc.
    With this kind of bugs in every update, Apple will no more be THE Apple.
    There are bugs which have not been fixed even in the subsequent updates. SMSs going blank being one of them.
    Miss you Sir Jobs.....

    I have since managed to sort mine out - when the phone was updated it wiped out the network settings. 
    I was able to reset them by manually putting the information in:
    Settings - General - Cellular - Cellular Data Network and then I put in the correct details for APN, username and Password in the relevant sections and now it works OK.
    Hopefully it will work for others too

  • Remote printer is recognized but message says can't find printer?  It worked great before installing OSX Maverick

    Remote printer is recognized but message says can't find printer?  It worked great before installing OSX Maverick?

    Thank you for your response.
    Unfortunately I have already rebooted the router and that did not fix the problem. The weird thing is that the computer is connected to the network, it just won't connect to my computer. I have printed the network configuration page to confirm this, and it says the wireless signal is strong. 
    I have not changed anything at all recently in terms of routers, networks, etc. The printer stopped working completely randomly.
    Is there a part in the printer that like emits a signal which computers, phones, etc are supposed to detect? I don't know enough about the mechanics to really theorize about what is wrong, but it seems like that is the only thing that stopped working. 
    Do you have any other suggestions?

  • Anyone else's iPhone 4s speaker not working after update to iOS 6.1?

    My speaker does not work after updating the software to iOS 6.1. No sound for incoming calls or texts, no speakerphone, no siri, no music or any sounds played from apps. Headphones still work as does anything plugged into the headphone jack. I've check all my settings - everything is correct. I've rebooted and restored settings several times, I've docked it - nothing works.
    Anyone else having this problem? Did anyone have this problem and were able to fix it? Does anyone know if Apple is aware and will be sending another update to fix it? I really don't think it's a hardware problem. Phone is in immaculate condition and never dropped or spilled on.

    As stated...
    Sorry... But...
    The discussion of Jailbroken Devices is against the Terms of Use of this Forum.
    You will need to look elsewhere

  • C7 browser not working after update to anna

    c7 browser not working after update to anna.. Plz help

    Hi bluz,
    Welcome to the Nokia forum.
    If the default browser doesn't work after updating to Anna, hard reset the device and then reinstall Anna with Nokia Suite. 
    Take a back up with Nokia Suite by going to Tools > Back up. When making the backup, don't tick the Settings box as this will back up the bug. Now hard reset the phone with *#7370# and default security code 12345 unless you've changed this code yourself. Once the phone has rebooted you will have an empty phone.
    Now click on the green icon in Nokia Suite and reinstall the current software. Once you've done this, click on Tools > Restore to place the back up back onto your phone.
    After doing the above you will be able to use the default browser again.
    Let me know how you get on so that I can troubleshoot, if necessary.
    Iris9290
    If my post has helped you in any way, please accept it as a solution or click on the white star, so that other users will be able to benefit from it too.

Maybe you are looking for

  • Win 7 pro / Deskjet 1280

    I'm trying to install a Deskjet 1280 on my new  Windows 7 pro  pc .... cannot find a driver for it..

  • How can I get this effect in Photoshop CS5.1?

    I want to turn a real image like http://bit.ly/pEx1ol into something like http://bit.ly/nfkoa4 Is there a way to do that or do I have to start from scratch?

  • 9i Application Server on VMware

    Morning, Our client wants to configure the new internet server on a Compaq server running Linux - but they want to configure a Windows 2000 server under VMware on this machine to run the application server. What does the group think? And in fact, do

  • Engeneering Change Management in DMS

    Hi gurus I read about using ECM in SAP Help Portal. I wanna know what is ECM used for in DMS. I heard that it tracks or records the changes in the objects such as DIR, Doc BOM, Material BOM... I have several following questions: - I did its configura

  • Error while installing Solution manager with Export

    Hi, I built an export of our Existing Solution Manager system and trying to install a new Demo System with that export but getting this error and not able to find any Solution. Please help me. /usr/sap/SOT/SYS/exe/run/R3load: sccsid @(#) $Id: //bas/7