Photoshop CS6 error : Could not complete the video flames  to layers command because Dynamiclink is not available

i can´t import videos and mp3  photoshop cs6 error : Could not complete the video flames  to layers command because Dynamiclink is not available .... what it means? who can i fix it?

Unfortunatly, the 32 bit versions of windows doesn't support video in photoshop cc.
see this post:
http://forums.adobe.com/message/5802978#5802978

Similar Messages

  • Error message "could not complete the video frames to layers command because dynamiclink is not avai

    So I decided to try my hand at making gifs and so I attempted to upload a video by going to file -> import -> video frames to layers. Before even letting my pick my video it comes up with an error message saying "could not complete the video frames to layers command because dynamiclink is not availible." I then tried file -> open -> and then selected the video and no matter what file type or size I chose I ended up with the same error message.
    I looked this problem up and attempted some of the solutions but to no avail. I tried clearing my preferences and restarting photoshop many times in addition to restarting my computer. I also checked to make sure it wasn't being blocked by any firewalls and it wasn't. My opperating system is Windows 7 and I'm using photoshop cs6. I've looked everywhere for an answer to this problem so if anyone is able to help me solve this problem I'd be much obliged.

    You see my C:\ drive is quite small as it's a SSD, so I made Adobe install programs on my E:\ drive too, however this was the main cause for Adobe not to function.
    After adjusting the settings to install everything back to my C:\ drive, it fixed my issue above and allowed me to run the 64bit version.

  • Could not complete the Video Frames to Layers command because Ps does not support video on this mac

    im trying to make a gif but it does not allow me to import the video frames this pops up when i do click it.

    Unfortunatly, the 32 bit versions of windows doesn't support video in photoshop cc.
    see this post:
    http://forums.adobe.com/message/5802978#5802978

  • Could not complete the video frames to layers command because photoshop does not support video in th

    When I attempt to import a video I get the message "could not complete the video frames to layers command because photoshop does not support video in this version of windows"  I am running on windows 8.1 pro (32 bit), shouldn't this be compatible???????????

    Unfortunatly, the 32 bit versions of windows doesn't support video in photoshop cc.
    see this post:
    http://forums.adobe.com/message/5802978#5802978

  • Could not complete the video frames to layers command because the file could not be opened

    I recently learned to make gif images using KMPlayer and my Photoshop CS6, but today I hit a snag that I can't seem to get around. Normally I capture a scene from a show DVD I have in KMPlayer and then import the video frames into layers/frames in photoshop with no problem. Well today I went to do that, and captured the scene with what seemed like no problem (the small captured scene saved with no problem) but when I went to CS6 to import the video into layers, I got the error message "Could not complete the video frames to layers command because the file could not be opened". At first I thought it was the KMPlayer saving the files wrong, so I retried and got the same error message. Irestored the players settings back to a default and the file still wouldn't open in photoshop, and then I even tried uninstalling/reinstalling the player trying to get it to work, and then I thought it must be photoshop, because even scenes I had captured at an earlier day that worked perfectly fine when importing would not open.
    What could possibly be causing this problem to occur. Should I uninstall/reinstall photoshop and see if that works, or am I doing something wrong?
    The files I'm trying to import are AVIs as always, I even tried to capture scenes in other formats to no avail. What could be causing the problem?

    I uninstalled an reinstalled photoshop totally and it didn't fix the problem either. I made a post on the KMPlayer's forum hoping for an answer but I haven't recieved one yet. I'm starting to think it's the kmplayer having a problem capturing, since I've started getting the error "could not import the file to layers because the file has no layers" sometimes in photoshop, but I'm still trying to work around in photoshop to see if the problem came from there.

  • Could not complete the video frames to layers command because the DynamicLink Media Server is not av

    I have this problem, I have PS CS6 and when I click on File> Import> Video Frames to Layers.. Next, the window that says "Initializing Video Import" starting to load and always get stuck and that's what appears: "Could not complete the video frames to layers command because the DynamicLink Media Server is not available". That's with aaaall the videos.
    PS: I've been trying with File> Open but that's what says "Could not complete your request because it is not the right kind of document"
    Anybody know what happens to my photoshop? Thx!

    The relevant auxiliary service/ helper app is being blocked and thus not launching,. anything from permissions issues to security tools getting in teh way. Check your Task Manager/ Activity Monitor, turn off security stuff, run as admin.
    Mylenium

  • "Could not complete the Video Frames to Layers command because the movie file could not be opened."

    I'm using Photoshop CS5 extended.
    I've been using that to make gifs. It was fine when I import video frams into layers with the video formats of .mov or .avi. But After I installed OSX 10.6.8, this message comes up everytime I want to import videos: "Could not complete the Video Frames to Layers command because the movie file could not be opened."
    So I installed my old OS back which is 10.6.3 but the problem is still there.
    May I know what to do to solve this problem because all along I've been fine with making gifs and importing videos until now.
    Please help, thank you.

    Adnicej- wrote:
     ...I've been using that to make gifs...
    The computer deities may be trying to say something to you.  GIF is not a video format.
    Are you opening video with the same codec that was successfully opened before?

  • PS CC "Could not complete Video Frames to Layers command because DynamicLink is not available" help?

    I'm running Windows 8.1 64-bit, AMD fx-6300, geforce gtx-760, 8gb RAM. All legitimately obtained, before you ask! Really bothered by this, when trying to make a gif, apparently "DynamicLink" is not available. Damn.

    Read through this link as it goes into problem. This is a computer problem that can usually be fixed by rebooting.  http://forums.adobe.com/message/4527195

  • Could not complete the video frames to layers because of a program error

    Whenever I try to import video into frames to layers on photoshop, I get this error. (could not complete the video frames to layers because of a program error)
    Why is that and how do I fix it???

    You see my C:\ drive is quite small as it's a SSD, so I made Adobe install programs on my E:\ drive too, however this was the main cause for Adobe not to function.
    After adjusting the settings to install everything back to my C:\ drive, it fixed my issue above and allowed me to run the 64bit version.

  • "Could not complete the "...."command because of a program error" PE10, Windows 7, 64 bit

    I have just done a clean re-install of  PE10 on my windows 7, 64 bit desktop because I was getting the "Could not complete the "...."command because of a program error" message every time I try to do anything to my file such as applying a filter, enhance or anything. After I re-installed it, I still am getting the same results, making it completely useless. I do not use PE10 often, as I use Lightroom 5.3 almost exclusively for my picture manipulations, but I do need it for some purposes. Please help.

    "...create a new layer by selecting the new layer icon at the bottom of the layers pallet..."
    That produces a blank layer. With this blank layer selected, you should get the message "Could not complete the command because the selected area is blank".

  • Nik Software Crash: "Could not complete the Color Efex Pro 4 command because of a problem with-"

    Nik Software/Photoshop Crash: "Could not complete the Color Efex Pro 4 command because of a problem with the filter module interface."  Define, Viveza work fine, the others, Color Efex, HDR Efex, Silver Efex don't.  I called Nik and they said they were familiar with this problem and that it was an Adobe problem.  They helped me uninstall and re-install the latest version of the filters.  Didn't fix the problem.  I called Adobe technical support, they confirmed that indeed it was an Adobe problem, but, they can't help me because they no longer offer support on CS5.  I'm on an iMac with Mountian Lion 10.8.5, running Photoshop CS5.1.  I searched the internet and found this problem mentioned in several places, just couldn't find the fix.  Interesting coincidence - I had been using Photoshop and the Nik software perfectly fine, even the morning of the day it began to crash.  I got a pop-up message from Adobe asking if they could anonymously monitor my usage to better their products.  I clicked on "Ask me later."  Then, my product crashed every time I tried to use the above-mentioned Nik software filters.  ???  Why would they want to monitor my usage of a product they won't/don't support anyway?  Help someone please - I really love the Nik software.  I paid top dollar for it back in the day because people like Dan Hughes actually answered your questions themselves.  The customer support was the best in the industry.  The opposite is true of Adobe, is it not?

    Thank you so much Chris.  I know I'm not the only person to run into this as both Nik/Google and Adobe acknowledged this problem.  I did however try something else to try and isolate the issue further.  I tried editing with Nik/Google Color Efex & Silver Efex, etc., in Aperture, and sure enough, the Nik/Google filters wouldn't open, or they would crash Aperture.  So - it's looking like a Nik/Google problem.  They used to be so good.  The crazy thing is that I had been using Photoshop with the Nik filters just fine, even earlier that very day.  What could have gone wrong?  Was there some kind of automatic update Saturday 3/1/14?  And it was especially weird that it happened immediately after I refused to allow Adobe to (anonymously) monitor my usage.  I'll call Nik/Google back tomorrow and tell them what you've told me, as well as letting them know their filters crashed Aperture too.  I'll report back as soon as I find a fix.  I know I'm not the only one out there who's experienced this.
    Thanks again!

  • Photoshop cs6 error "could not use the type tool because the target channel is hidden.  happens when im typing in photoshop, go to another layer and then come back. can't alter text at that point

    photoshop cs6 error "could not use the type tool because the target channel is hidden.  happens when im typing in photoshop, go to another layer and then come back. can't alter text at that point.  i really need to get thsi figured out. thank you.

    You may have answered my question. I AM using the 64bit version of Illustrator CS6. I had no idea there were bugs in it that affected paths copied and pasted from Illustrator to Photoshop.
    A bit more about what I'm trying to accomplish... I'm trying to follow Deke's tutorial (http://www.deke.com/content/dekes-techniques-018-creating-a-3d-pie-chart) which is already difficult since so much has changed between CS5.5 and 6, but then on top of that, I keep getting errors!
    So I created the pie chart exactly as he shows and copied and pasted into Photoshop exactly as he does. Before submitting this post, though, I tried drawing just two very simple triangle shapes, copying them both and pasting them into Photoshop as a shape layer. The shapes weren't overlapping, but they were a part of the same shape layer just like the pie chart tutorial.
    Thanks for your help. If there is anything else I should try before just giving up because of the 64bit bugs, please let me know.

  • Could not copy the file "C:\Microsoft.WITDataStore.dll" because it was not found.

    Hi All,
    I need to use "Microsoft.TeamFoundation.WorkItemTracking.Common, Version=11.0.0.0" dll in my code.
    But when I try to build my application I get the below error.
    "Could not copy the file "C:\Microsoft.WITDataStore.dll" because it was not found."
    And when I try to include version 12 of the same dll , code gets build successfully. And when I try to consume the code(which uses the dll) I get
    'Could not load file or assembly 'Microsoft.TeamFoundation.WorkItemTracking.Client.DataStoreLoader,
    Version=11.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a' or one of its dependencies.
    The system cannot find the file specified."
    how do I go ahead with this..??
    Thanks
    Uma.K

    Hi Uma,
    You might check whether the version 11 of the assembly is referenced or added into soruce control. When use the referenced files, please use the relative path for building. If the version 11 of the assembly is not added, please add it to source control and
    make sure it's referenced correctly.
    It would be better to let us know the TFS version that you're using. And you can also use version 12 if the assembly works fine. If you have any other concerns, elaborate your scenario with more details.
    Best regards,
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Safari could not download the file "Firefox 20.0.dmg" because there is not enough free disk space.

    What does this error message mean. I have pleanty of free disk space - Safari could not download the file “Firefox 20.0.dmg” because there is not enough free disk space.

    That misleading error message can be the result of moving a download while it's in progress. Right-click the download package and select Show Package Contents from the contextual menu. The file you downloaded may be in the folder that opens.

  • Safari could not download the file "iTunes12.0.1.dmg" because there is not enough free disk space.

    Safari could not download the file “iTunes12.0.1.dmg” because there is not enough free disk space.  How do i resolve this issue?

    From the menu bar, select
               ▹ System Preferences... ▹ Time Machine
    If there is a closed padlock icon in the lower left corner of the preference pane, click it to unlock the settings and authenticate. Turn Time Machine OFF, then back ON. Close the window.
    Restart the computer. Try the download again.

Maybe you are looking for

  • Uppercase text  in textfield

    I have an issue with textfield. when i type the text in to it , it should display in uppercase , but when i load data from search button , the data should be whatever the case the data is coming from there. Is it possible by adding any keylistener?

  • Funny instance with maps in UK

    I have a question. I have downloaded UK maps and set the phone to NOT use the network. Everything works great, but this one time, while using the maps application in a different city from the one I live I got a message saying 'network access needed'

  • Audio files folder

    Hi, What do I need to do in order to have the audio files folder from a project always in an external hard drive, I've tried with an alias but it didn't work. Thanks in advance.

  • My raw video won't play in CS5? HELP PLEASE!

    Ok I'm new to after effects and I just got ae cs5 for christmas. I just installed it and I wanted to do a test so I took some raw footage from my JVC HD3 Everio video camera. The raw video is in .TOD format and when i try to open it in ae cs5 it says

  • Going from one flv to another page.

    On my web page, I have a presentation video in a flv file. I want, when the file finishes playing to go directly into another page. does any one knows how to do it. I've tried placing the flv file into a movie clip, calling the movie clip on frame on