Photoshop Cs6 is hanging when trying to work in 3D when it wasn't before

When I first started using 3D in Photoshop it was working rather smoothly and seemed to chug along fairly fast. Then one day when I was working in it as usual and tried to perform some random action it just started hanging with the spinning blue circle for about 2 or 3 minutes. It continued to do this ever since, sometimes hanging for up to 5 minutes before performing my command. Some actions cause it to hang longer than others, such as creating a new light and changing the diffuse color of a material, which is by far the worst in terms of the amount of time it will hang. I have searched the forums and google and tried all suggestions to any problem that seemed to have a similar nature. The only time that I had a partial success was after I had uninstalled Photoshop, then ran the adobe creative suite cleaner tool, then manually searched through the registry for every reference to adobe and Photoshop I could find and deleted them. I then reinstalled Photoshop and updated it. When I started using it in 3D after that it was running smooth as butter, no hangs or stalls on anything, including creating lights and changing diffuse colors. But my joy was not long lived, as after about 2 hours of use it started to do its usual behavior of hanging again.So I tried that approach again and it did not seem to work a second or third or fourth time. So out of desperation and all out of options, I decided to run process monitor from sysinternals to see if it showed me anything even though I knew that I probably would not understand what it were showing me. I noticed a lot of errors with the results of "name not found" for registry calls, "invalid parameter" for directory quarries, and "no such file" for file reads. But the one that seems to be happening the most whenever the program is hanging is it is trying to open a file from C:\program files\Adobe\photoshop x64\required\CgShaders, but that directory is nonexistent on my system. I was hoping that someone would be able to solve this for me as 3D in Photoshop is a big part of my workflow and I am all out of ideas. I'm going to include the process monitor log file and it will be in pml format which you will need process monitor to read, but it is a very small, portable, and free program which can be downloaded from http://technet.microsoft.com/en-us/sysinternals/bb896645. The Log file Can be downloaded from http://sdrv.ms/Xxcmuu (skydrive) or https://www.box.com/s/jzdmgmdmz7xe47smalv2 (box) .
And here is my system info from Photoshop (I have a first generation I3 processor with intel HD graphics, which as I said was running fairly smooth before my problem started):
Adobe Photoshop Version: 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00) x64
Operating System: Windows NT
Version: 6.2
System architecture: Intel CPU Family:6, Model:5, Stepping:5 with MMX, SSE Integer, SSE FP, SSE2, SSE3, SSE4.1, SSE4.2, HyperThreading
Physical processor count: 2
Logical processor count: 4
Processor speed: 2394 MHz
Built-in memory: 7989 MB
Free memory: 3903 MB
Memory available to Photoshop: 7036 MB
Memory used by Photoshop: 65 %
Image tile size: 128K
Image cache levels: 4
The GPU Sniffer crashed on 1/22/2013 at 6:33:53 PM
OpenGL Drawing: Enabled.
OpenGL Drawing Mode: Advanced
OpenGL Allow Normal Mode: True.
OpenGL Allow Advanced Mode: True.
OpenGL Allow Old GPUs: Not Detected.
Video Card Vendor: Intel
Video Card Renderer: Intel(R) HD Graphics
Display: 1
Display Bounds:=  top: 0, left: 0, bottom: 768, right: 1280
Video Card Number: 1
Video Card: Intel(R) HD Graphics
OpenCL Unavailable
Driver Version: 8.15.10.2858
Driver Date: 20121009000000.000000-000
Video Card Driver: igdumd64.dll,igd10umd64.dll,igdumdx32,igd10umd32
Video Mode:
Video Card Caption: Intel(R) HD Graphics
Video Card Memory: 3770 MB
Video Rect Texture Size: 8192
Serial number: Tryout Version
Application folder: C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)\
Temporary file path: C:\Users\RYANS_~1\AppData\Local\Temp\
Photoshop scratch has async I/O enabled
Scratch volume(s):
  C:\, 341.9G, 102.3G free
Required Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)\Required\
Primary Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)\Plug-ins\
Additional Plug-ins folder: not set
Installed components:
   A3DLIBS.dll   A3DLIB Dynamic Link Library   9.2.0.112  
   ACE.dll   ACE 2012/06/05-15:16:32   66.507768   66.507768
   adbeape.dll   Adobe APE 2012/01/25-10:04:55   66.1025012   66.1025012
   AdobeLinguistic.dll   Adobe Linguisitc Library   6.0.0  
   AdobeOwl.dll   Adobe Owl 2012/06/26-12:17:19   4.0.95   66.510504
   AdobePDFL.dll   PDFL 2011/12/12-16:12:37   66.419471   66.419471
   AdobePIP.dll   Adobe Product Improvement Program   6.0.0.1654  
   AdobeXMP.dll   Adobe XMP Core 2012/02/06-14:56:27   66.145661   66.145661
   AdobeXMPFiles.dll   Adobe XMP Files 2012/02/06-14:56:27   66.145661   66.145661
   AdobeXMPScript.dll   Adobe XMP Script 2012/02/06-14:56:27   66.145661   66.145661
   adobe_caps.dll   Adobe CAPS   6,0,29,0  
   AGM.dll   AGM 2012/06/05-15:16:32   66.507768   66.507768
   ahclient.dll    AdobeHelp Dynamic Link Library   1,7,0,56  
   aif_core.dll   AIF   3.0   62.490293
   aif_ocl.dll   AIF   3.0   62.490293
   aif_ogl.dll   AIF   3.0   62.490293
   amtlib.dll   AMTLib (64 Bit)   6.0.0.75 (BuildVersion: 6.0; BuildDate: Mon Jan 16 2012 18:00:00)   1.000000
   ARE.dll   ARE 2012/06/05-15:16:32   66.507768   66.507768
   AXE8SharedExpat.dll   AXE8SharedExpat 2011/12/16-15:10:49   66.26830   66.26830
   AXEDOMCore.dll   AXEDOMCore 2011/12/16-15:10:49   66.26830   66.26830
   Bib.dll   BIB 2012/06/05-15:16:32   66.507768   66.507768
   BIBUtils.dll   BIBUtils 2012/06/05-15:16:32   66.507768   66.507768
   boost_date_time.dll   DVA Product   6.0.0  
   boost_signals.dll   DVA Product   6.0.0  
   boost_system.dll   DVA Product   6.0.0  
   boost_threads.dll   DVA Product   6.0.0  
   cg.dll   NVIDIA Cg Runtime   3.0.00007  
   cgGL.dll   NVIDIA Cg Runtime   3.0.00007  
   CIT.dll   Adobe CIT   2.0.5.19287   2.0.5.19287
   CoolType.dll   CoolType 2012/06/05-15:16:32   66.507768   66.507768
   data_flow.dll   AIF   3.0   62.490293
   dvaaudiodevice.dll   DVA Product   6.0.0  
   dvacore.dll   DVA Product   6.0.0  
   dvamarshal.dll   DVA Product   6.0.0  
   dvamediatypes.dll   DVA Product   6.0.0  
   dvaplayer.dll   DVA Product   6.0.0  
   dvatransport.dll   DVA Product   6.0.0  
   dvaunittesting.dll   DVA Product   6.0.0  
   dynamiclink.dll   DVA Product   6.0.0  
   ExtendScript.dll   ExtendScript 2011/12/14-15:08:46   66.490082   66.490082
   FileInfo.dll   Adobe XMP FileInfo 2012/01/17-15:11:19   66.145433   66.145433
   filter_graph.dll   AIF   3.0   62.490293
   hydra_filters.dll   AIF   3.0   62.490293
   icucnv40.dll   International Components for Unicode 2011/11/15-16:30:22    Build gtlib_3.0.16615  
   icudt40.dll   International Components for Unicode 2011/11/15-16:30:22    Build gtlib_3.0.16615  
   image_compiler.dll   AIF   3.0   62.490293
   image_flow.dll   AIF   3.0   62.490293
   image_runtime.dll   AIF   3.0   62.490293
   JP2KLib.dll   JP2KLib 2011/12/12-16:12:37   66.236923   66.236923
   libifcoremd.dll   Intel(r) Visual Fortran Compiler   10.0 (Update A)  
   libmmd.dll   Intel(r) C Compiler, Intel(r) C++ Compiler, Intel(r) Fortran Compiler   10.0  
   LogSession.dll   LogSession   2.1.2.1640  
   mediacoreif.dll   DVA Product   6.0.0  
   MPS.dll   MPS 2012/02/03-10:33:13   66.495174   66.495174
   msvcm80.dll   Microsoft® Visual Studio® 2005   8.00.50727.6910  
   msvcm90.dll   Microsoft® Visual Studio® 2008   9.00.30729.1  
   msvcp100.dll   Microsoft® Visual Studio® 2010   10.00.40219.1  
   msvcp80.dll   Microsoft® Visual Studio® 2005   8.00.50727.6910  
   msvcp90.dll   Microsoft® Visual Studio® 2008   9.00.30729.1  
   msvcr100.dll   Microsoft® Visual Studio® 2010   10.00.40219.1  
   msvcr80.dll   Microsoft® Visual Studio® 2005   8.00.50727.6910  
   msvcr90.dll   Microsoft® Visual Studio® 2008   9.00.30729.1  
   pdfsettings.dll   Adobe PDFSettings   1.04  
   Photoshop.dll   Adobe Photoshop CS6   CS6  
   Plugin.dll   Adobe Photoshop CS6   CS6  
   PlugPlug.dll   Adobe(R) CSXS PlugPlug Standard Dll (64 bit)   3.0.0.383  
   PSArt.dll   Adobe Photoshop CS6   CS6  
   PSViews.dll   Adobe Photoshop CS6   CS6  
   SCCore.dll   ScCore 2011/12/14-15:08:46   66.490082   66.490082
   ScriptUIFlex.dll   ScriptUIFlex 2011/12/14-15:08:46   66.490082   66.490082
   tbb.dll   Intel(R) Threading Building Blocks for Windows   3, 0, 2010, 0406  
   tbbmalloc.dll   Intel(R) Threading Building Blocks for Windows   3, 0, 2010, 0406  
   TfFontMgr.dll   FontMgr   9.3.0.113  
   TfKernel.dll   Kernel   9.3.0.113  
   TFKGEOM.dll   Kernel Geom   9.3.0.113  
   TFUGEOM.dll   Adobe, UGeom©   9.3.0.113  
   updaternotifications.dll   Adobe Updater Notifications Library   6.0.0.24 (BuildVersion: 1.0; BuildDate: BUILDDATETIME)   6.0.0.24
   WRServices.dll   WRServices Friday January 27 2012 13:22:12   Build 0.17112   0.17112
   wu3d.dll   U3D Writer   9.3.0.113  
(post shortened)
Optional and third party plug-ins: NONE
Plug-ins that failed to load: NONE
Flash:
   Mini Bridge
   Kuler
Installed TWAIN devices: NONE

Thank you very much for your reply. And yes I have tried all of these suggestions that you have just made. And as for the GPU crash I did not notice that in there before but I also didn't look for it because every time I looked before it wasn't there, and looking at the date that was when that I was rolling back\uninstalling\reinstalling\trying modded drivers, etc., Which is probably the reason why the gpu sniper crashed.
One interesting thing that you said was whether there is the same failure in a new design as opposed to an existing one. The answer to that is yes and no. To elaborate, when the program was working as it is supposed to eve and creating new lights and positioning them did not cause any slowdown despite the file that I was working on, but after the problem starts occurring it is like a snowball rolling down a hill. Every time I open the file (the one I was working on when the problem started to happen) to continue work on it be sluggish response of Photoshop is still there and only gets worse. If I start over on a new file the program will run much more smoothly, but will still had a slight amount of sluggishness with less intensive task whereas the more intensive task such as working with lights is still moderately sluggish but not to the extent as it was working in the previous file. As you said in your post it seems the father all along I get in my document the more pronounced and time consuming the freezes become. But nonetheless wants the problem has occurred it does not go away I can only lesson that by starting from scratch, which is not very convenient.
If you look at the process monitor log file linked in my first post and search through it pretty quickly you will see photoshop doing this
1-Operation: unknown     Path:C:\
2-Operation: unknown     Path:C:\Program Files
3-Operation: unknown     Path:C:\Program Files\Adobe
4-Operation: unknown     Path:C:\Program Files\Adobe\Adobe Photoshop                                 Cs6 (64 bit)
5-Operation: unknown     Path:C:\Program Files\Adobe\Adobe Photoshop                                 Cs6 (64 bit)\Required
6-Operation: unknown     Path:C:\Program Files\Adobe\Adobe Photoshop                                 Cs6 (64 bit)\Required\CgShaders
7-Operation: unknown     Path:C:\Program Files\Adobe\Adobe Photoshop                                 Cs6 (64 bit)\Required\CgShaders
1-Result: INVALIDATE PARAMETER
2-Result: INVALIDATE PARAMETER
3-Result: INVALIDATE PARAMETER
4-Result: INVALIDATE PARAMETER
5-Result: INVALIDATE PARAMETER
6-Result: NO SUCH FILE
7-Result: NAME NOT FOUND
It does this repeatedly over and over again, specifically when I tried to work with lights. The weird thing is that there is no directory in required called CgShaders. I see 1 CG.dll & 1 cgGL.dll in the Photoshop (64 bit) directory. To meet that just seems very strange and probably more than a coincidence and probably does not happen on everybody else's system.
This is the process monitor log file that I saved in csv format and edited the first three blocks so that it fit correctly. Open it up in wordpad and you'll see what I mean. This is what I was talking about right above.
https://www.dropbox.com/s/43waqf9wvc8xo7m/Logfile.CSV.rtf

Similar Messages

  • When trying to work with Agilent 34401A multimeter (serial RS-232 connection), HP34401A Getting Started.vi gives always the message: "Error 1073807369 occurred at Old VISA Open ".

    Baud rate and parity are set correctly, RS-232 cable is also connected correctly. My QuickBasic program has no problems to read and write to the Multimeter. It is obviously a software problem: the same error is persistent if I disconnect RS-232 cable.
    I downloaded NI-VISA 2.6 for Windows 95/98/NT/ME/2000/XP frorm digital.ni.com and installed it. But it did not help.
    Thank you in advance
    Best regards
    Alexei Soloviev

    Hi Steve
    I have problems with the 34401A and serial communication. Do you remember
    where the error was in the code ?
    Thanks
    Klaus
    wrote in message
    news:[email protected]..
    > Alexei,
    > This may or may not help, I was tasked to do something similar
    > recently and found an error in their driver. The GPIB VISA worked
    > fine, but when I tried it on serial it played up. There was an errant
    > carriage return (or CR/LF I can't remember). GPIB liked one and Serial
    > liked the other. It always amuses me that we never have problems with
    > Quickbasic!.
    > If you want me to dig deeper give me a shout.
    >
    > Steve Watts
    >
    > On Thu, 24 Jan 2002 06:16:55 -0800 (PST), "Alexei V. Soloviev"
    > wrote:
    >
    > >When trying
    to work with Agilent 34401A multimeter (serial RS-232
    > >connection), HP34401A Getting Started.vi gives always the message:
    > >"Error 1073807369 occurred at Old VISA Open ".
    > >
    > >Baud rate and parity are set correctly, RS-232 cable is also connected
    > >correctly. My QuickBasic program has no problems to read and write to
    > >the Multimeter. It is obviously a software problem: the same error is
    > >persistent if I disconnect RS-232 cable.
    > > I downloaded NI-VISA 2.6 for Windows 95/98/NT/ME/2000/XP frorm
    > > digital.ni.com and installed it. But it did not help.
    > >Thank you in advance
    > >Best regards
    > >Alexei Soloviev
    >

  • I have adobe photoshop CS6 and I am trying to use the analysis tools but all of them except for the ruler tool are unavailable. Am I missing certain plug ins?

    I have adobe photoshop CS6 and I am trying to use the analysis tools but all of them except for the ruler tool are unavailable. Am I missing certain plug ins?

    Which operating system?
    If I recall, some features were not fully supported on XP.
    Nancy O.

  • My Photoshop CS6 oil painting tool doesn't work

    hello my adobe photoshop cs6 oil painting tool does nt work and i really need it at the moment thank

    Hello there!
    There might be a problem with your video card or its driver is defective.
    Please view for more information:
    http://helpx.adobe.com/photoshop/kb/photoshop-cs6-gpu-faq.html#id_95704
    janelle

  • Just tried to trial the Adobe Photoshop CS6 as having issues trying to use disks...

    Downloaded fine but no matter what version I try downloading I seem to get message setup.xml could not be loaded.  File corrupt?  Help please am no techie and been on it all morning using vista home basic service pack 2 if it helps?  Thanks.

    Will give the link a go, thankyou...
    Date: Fri, 9 Nov 2012 12:15:06 -0700
    From: [email protected]
    To: [email protected]
    Subject: Just tried to trial the Adobe Photoshop CS6 as having issues trying to use disks...
        Re: Just tried to trial the Adobe Photoshop CS6 as having issues trying to use disks...
        created by Jeff A Wright in Trial Download & Install FAQ - View the full discussion
    It is possible the download was corrupted.  You can try following the steps listed at http://forums.adobe.com/thread/981369 to initiate a direct download of the software.
         Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/4835721#4835721
         Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4835721#4835721
         To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4835721#4835721. In the Actions box on the right, click the Stop Email Notifications link.
         Start a new discussion in Trial Download & Install FAQ by email or at Adobe Community
      For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

  • Photoshop CS6 Crashing and acting erratically while working with 3D

    So,.. CS6 keeps crashing and doing crazy things on me while working on my 2D/3D composite digital room setting. It seems to me like what's causing most of the crashing is the materials. Here's the problems:
    - Crashes constantly while simply trying to select a material from the 3D panel
    - Sometimes places meshes in a totally different spot in the scene and dissallows me to move them elsewhere
    - Meshes are gone when opening the file, and I can't get them to reappear
    So, as you may assume, I'm trying to stay composed at this point. My artwork would look great if, well, 3D in CS6 would simply WORK. But I'm remaining calm, and consulting you all..
    I'm modeling, texturing, and UV mapping the 3D room objects (such as tables, chairs, hutches, etc.) in Maya 7, exporting as .obj files and placing into PS, and merging them with the scene layer in order for everything to have consistent lighting.
    I've also tried taking the 3D settings to Basic and the shadow quality to low, in case the crashes are due to cpu performance. I've also went and got the latest update for PS CS6
    Here's some system specs:
    Win7 Home Premim, 64 bit
    2.8ghz Intel Core i7
    8gb ram ddr3
    NVidia GeForce 310 512 mb
    Thanks in advance!
    Andy

    Unfortunately I can't offer you all that much direct 3D help EXCEPT to say that in all the time I have been working with Photoshop CS6 Extended's 3D stuff (on two different systems) I have seen more or less stability with the 3D facilities depending on my display driver versions.  At one point earlier this year, while on the ATI Catalyst 12.3 driver I believe it was, I could edit 3D stuff literally for hours without faults.  At the moment, with 12.8 (and a different ATI card than I had before), most stuff works but there are still cases where I can cause it to crash. 
    Display driver failures can end up looking like anything but display driver issues, which is why I mentioned the above.  To you it may seem like Photoshop is buggy as hell, but really it's something about your system causing it.
    I realize my ATI experience is only marginally useful to you, but it's entirely possible a display driver upgrade could help you.  In your case you'll want to visit nVidia.com and see if they have released an updated display driver version for your card.
    Good luck!
    -Noel

  • Bought photoshop cs6 extended on pc, trying to transfer to mac.

    I bought Photoshop CS6 Extended on a PC in January of 2013. I recently bought a MAC and want to transfer the program to my new computer. I have deactivated the program on my pc and now when trying to install the program on the MAC, the installation software says that my serial number is not vaild. what other options do I have since product support does not take phone calls on this issue

    Here is a copy of the error
    This means : Installation failed.
    Verification of the Adobe Software failed
    The product you want to install is no valid Adobe product and seems to be falsified.
    HUgo
    Op 29-aug.-2014, om 23:42 heeft Jeff A Wright <[email protected]> het volgende geschreven:
    I bought Photoshop CS6 Extended(education edition) for Mac. Now ik want to install it on my (new) macbook. I have the product code and serial number. I receive an error code: may be a false copy. How can I install this program?
    created by Jeff A Wright in Downloading, Installing, Setting Up - View the full discussion
    Hugo please turn off your e-mail signature.
    If your serial number is listed as being valid at http://www.adobe.com/ then I would recommend obtaining a fresh copy of the installation files.  You can find details on how to locate your serial number at Find your serial number quickly - http://helpx.adobe.com/x-productkb/global/find-serial-number.html.
    To download a fresh copy of the installation files please see Download CS6 products.
    Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at https://forums.adobe.com/message/6685617#6685617
    Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
    To unsubscribe from this thread, please visit the message page at . In the Actions box on the right, click the Stop Email Notifications link.
    Start a new discussion in Downloading, Installing, Setting Up by email or at Adobe Community
    For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

  • I can't download Photoshop CS6 to my Win 7 64 bit PC.  When I click on the installer, it just clocks

    When I click on the Download Photoshop CS6 beta for Windows (ZIP, 1.7 GB) option, the window tab gets the revolving circle in the corner, but nothing happens.  There is no window to choose open/save.  There is no other message.  Nothing seems to happen.  Please help.

    Hi,
    My suggestion: manual download driver from the following link & install to your machine:
       http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4063&lc=en&cc=us&dlc=en&sw_lang=&product=3793...
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Why does Firefox not acknowledge that I have Silverlight already installed. When trying to work with "Getting Started" in Windows 7, it keeps telling me I have to download Silverlight to view this information.

    I recently purchased a new computer with Windows 7 OS. When trying to learn the transition experience from Windows XP to this new OS version, I was presented with this problem of going around in circles.
    When trying to view "Discover Windows 7" via "Start>Getting Started>Discover Windows 7", a Microsoft website opens to; (http://windows.microsoft.com/en-US/windows7/help/videos/personalizing-your-pc). It tells me; To view this contents, please install Microsoft Silverlight. Once I install it and get back to this page, I get the same message. I can not view any of the help content before installing Microsoft Silverlight. So now it is a never ending "CIRCLE of LIGHT"! Is this a problem with my Firefox or with Windows Microsoft 7?

    I'm not seeing the Silverlight plugin in your More system details list, so Firefox doesn't find it if you have it.
    I assume that you also do not see it in Tools > Add-ons > Plugins ?

  • Since latest update, Safari unresponsive when trying to view different images when online shopping,

    Since latest software update on my iPad 3, Safari is unresponsive when trying to zoom or open other images, when online shopping.

    Tap Settings > Safari
    Tap to clear History, Cookies, and Data.
    Then reset the iPad.
    Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
    If that doesn't help, tap Settings > General > Reset > Reset All Settings
    No data is lost due to a reset.

  • Photoshop CS6 won't do anything, but works on a different user profile

    Hello I am receiving the error ‘photoshop could not complete your request because of a programme error’ message any time I try and do anything in photoshop, I can’t open, edit, change any settings or access any menu in photoshop without this error, rendering it, currently, a useless waste of money.
    I am running CS6 on a mac running Mountain lion 10.8.3 everything is up to date, both operating system and photoshop. I have tried deleting prefs, plist files, adobe cleaner and re-installation, all several times and I still have the same problem. I also cannot find any log files, or access anything through help>system information.
    It does work under a new user profile, but I'm not too happy about that as a work around
    I get an error message in the console which says
    5/05/2013 19:26:06.000 kernel[0]: proc 4823: load code signature error 2 for file "CS6ServiceManager"
    15/05/2013 19:26:06.000 kernel[0]: CODE SIGNING: cs_invalid_page(0x1000): p=4823[CS6ServiceManage] clearing CS_VALID
    Can anybody help?

    I am experiencing the same problem with my iPod classic 120GB. When I Connect it to my computer for the first time since I started it, it works fine. The iPod is recognized by the computer and iTunes. When I eject the iPod thru the iTunes interface and reconnect it again (without rebooting my computer) the computer freezes. When I start iTunes again, nothing happens until I remove the iPod from the computer (it is stil displaying 'connected'). Removing the iPod unfreezes the computer. I think it is a software problem but I can't find a solution on the internet for such a problem.
    Can someone help?

  • Using SSRS local mode, receive invalid token error when trying to export the report when running in worker thread

    We're using ASP.net with .Net 4, developing with Visual Studio 2012.  We use SSRS 2012sp1 with local reports, so exporting the report ourselves instead of using a reportviewer control (and not using the SQL Reporting service).  The reports are
    executing fine when we export the report in the main thread, but if we spawn a worker thread and run a report there we receive the following error when calling Render():
    Microsoft.ReportingServices.ReportProcessing.ReportProcessingException: Failed to load expression host assembly. Details: Invalid token for impersonation - it cannot be duplicated.
    We only receive this when running a report that uses expressions on a separate thread.  I've tried running the application pool under all the default built-in accounts (NetworkService, etc), and under admin user accounts to no avail.
    This didn't occur with the previous version of our application which used .net 3.5.

    As mentioned, we are not using the Reportviewer control, we are rendering locally.  Not certain if that would make a difference.
    Also, I had tried using all the built-in accounts.  Just for kicks I changed it to LocalSystem again, then reset IIS (see image below).  I then tried to export the report in a worker thread and received the same error.
    Here is the text from the exception:
    Microsoft.Reporting.WebForms.LocalProcessingException: An error occurred during local report processing. ---> Microsoft.ReportingServices.ReportProcessing.ReportProcessingException: Failed to load expression host assembly. Details: Invalid token for impersonation - it cannot be duplicated.
    at Microsoft.ReportingServices.RdlExpressions.ReportRuntime.ProcessLoadingExprHostException(ObjectType assemblyHolderObjectType, Exception e, ProcessingErrorCode errorCode)
    at Microsoft.ReportingServices.RdlExpressions.ReportRuntime.LoadCompiledCode(IExpressionHostAssemblyHolder expressionHostAssemblyHolder, Boolean includeParameters, Boolean parametersOnly, ObjectModelImpl reportObjectModel, ReportRuntimeSetup runtimeSetup)
    at Microsoft.ReportingServices.OnDemandProcessing.Merge.Init(Boolean includeParameters, Boolean parametersOnly)
    at Microsoft.ReportingServices.OnDemandProcessing.Merge.Init(ParameterInfoCollection parameters)
    at Microsoft.ReportingServices.ReportProcessing.Execution.ProcessReportOdp.CreateReportInstance(OnDemandProcessingContext odpContext, OnDemandMetadata odpMetadata, ReportSnapshot reportSnapshot, Merge& odpMerge)
    at Microsoft.ReportingServices.ReportProcessing.Execution.ProcessReportOdp.Execute(OnDemandProcessingContext& odpContext)
    at Microsoft.ReportingServices.ReportProcessing.Execution.RenderReportOdpInitial.ProcessReport(ProcessingErrorContext errorContext, ExecutionLogContext executionLogContext, UserProfileState& userProfileState)
    at Microsoft.ReportingServices.ReportProcessing.Execution.RenderReport.Execute(IRenderingExtension newRenderer)
    at Microsoft.ReportingServices.ReportProcessing.ReportProcessing.RenderReport(IRenderingExtension newRenderer, DateTime executionTimeStamp, ProcessingContext pc, RenderingContext rc, IChunkFactory yukonCompiledDefinition)
    at Microsoft.Reporting.LocalService.CreateSnapshotAndRender(ReportProcessing repProc, IRenderingExtension renderer, ProcessingContext pc, RenderingContext rc, SubreportCallbackHandler subreportHandler, ParameterInfoCollection parameters, DatasourceCredentialsCollection credentials)
    at Microsoft.Reporting.LocalService.Render(String format, String deviceInfo, String paginationMode, Boolean allowInternalRenderers, IEnumerable dataSources, CreateAndRegisterStream createStreamCallback)
    at Microsoft.Reporting.WebForms.LocalReport.InternalRender(String format, Boolean allowInternalRenderers, String deviceInfo, PageCountMode pageCountMode, CreateAndRegisterStream createStreamCallback, Warning[]& warnings)
    --- End of inner exception stack trace ---
    at Microsoft.Reporting.WebForms.LocalReport.InternalRender(String format, Boolean allowInternalRenderers, String deviceInfo, PageCountMode pageCountMode, CreateAndRegisterStream createStreamCallback, Warning[]& warnings)
    at Microsoft.Reporting.WebForms.LocalReport.InternalRender(String format, Boolean allowInternalRenderers, String deviceInfo, PageCountMode pageCountMode, String& mimeType, String& encoding, String& fileNameExtension, String[]& streams, Warning[]& warnings)
    at Microsoft.Reporting.WebForms.LocalReport.Render(String format, String deviceInfo, PageCountMode pageCountMode, String& mimeType, String& encoding, String& fileNameExtension, String[]& streams, Warning[]& warnings)
    at Microsoft.Reporting.WebForms.Report.Render(String format, String deviceInfo, String& mimeType, String& encoding, String& fileNameExtension, String[]& streams, Warning[]& warnings)
    at IxSS.Infolinx.Report.MicrosoftInfolinxReport.ExportReport(String strFileFullyQualifiedPath, String strExportType, String strFilterDesc, Dictionary`2 extraParams, String area)
    at IxSS.Infolinx.Report.MicrosoftInfolinxReport.ExportReport(String strFileFullyQualifiedPath, String strExportType, String strFilterDesc, Dictionary`2 extraParams)

  • Color Range command in Photoshop CS6 13.0.4 no longer works after update

    I just updated to 13.0.4 at the end of last week.  Today I went to use the Color Range command and it will not select any colors.  The Eyedropper tool works fine.  Adjusting the fuzziness and other options doesn't make a difference.  Nor does selecting multiple instances of a color to add to the selection.  Since I use this command regularly,  I feel confident that it is a bug with the update and I would love to hear of any possible fixes.  Or, is it possible to downgrade back to 13.0.3?  I didn't realize how much I used this and it's a major inconvenience. 

    I feel confident that it is a bug with the update and I would love to hear of any possible fixes. 
    Some people, when encountering unexpected behaviour in Photoshop, seem overly prone to use the term »bug«.
    Have you performed the usual trouble-shooting routines (trashing prefs by keeping command-alt-shift/ctrl-alt-shift pressed while starting Photoshop after making sure all customized presets like Actions, Patterns, Brushes etc. have been saved and making a note of the Preferences you’ve changed, 3rd party plug-ins deactivation, system maintenance, cleaning caches, font validation, etc.)?
    Could you please post a screenshot with the pertinent Panels and Dialogs visible?

  • Downloaded Photoshop CS6 Trial Version & Bridge won't work.

    When I go to open Bridge CS6, it gives me the error "Adobe Bridge CS6 has stopped working"
    With the following details:
    Problem signature:
      Problem Event Name:          APPCRASH
      Application Name:          Bridge.exe
      Application Version:          5.0.0.399
      Application Timestamp:          4f5ec28e
      Fault Module Name:          Bridge.exe
      Fault Module Version:          5.0.0.399
      Fault Module Timestamp:          4f5ec28e
      Exception Code:          c0000005
      Exception Offset:          000000000036ae49
      OS Version:          6.1.7600.2.0.0.256.1
      Locale ID:          1033
      Additional Information 1:          dca5
      Additional Information 2:          dca5eef3eb4639786ac397e2f866e6e1
      Additional Information 3:          e746
      Additional Information 4:          e7466c1cfabe0b9e05e4ad5ef8ebe80c
    Can someone please help?

    This might help :-
    http://helpx.adobe.com/bridge/kb/troubleshoot-errors-freezes-bridge-windows.html
    [Moved the discussion to Bridge Forums]

  • Problem when tried to work with jstl

    i have downloaded standard tag library and copied the
    jakarta-taglibs/standard-1.0/lib file into /WEB-INF/lib as said in
    http://java.about.com/od/beginningjava/l/aa_jstl_intro_2.htm
    and tried to execute hamsandwhich.jsp which is as follows
    <%@ taglib prefix="c" uri="http://java.sun.com/jstl/core" %>
    Setting the value: "Hello World!"
    <c:set var="hello" value="Hello World!"/>
    <p/>
    <c:out value="${hello}"/>
    i get an error
    org.apache.jasper.JasperException: This absolute uri (http://java.sun.com/jstl/core) cannot be resolved in either web.xml or the jar files deployed with this application
    but i dont know how to check with web.xml since i dont know xml
    here is my web.xml
    <?xml version="1.0" encoding="ISO-8859-1"?>
    <!DOCTYPE web-app
    PUBLIC "-//Sun Microsystems, Inc.//DTD Web Application 2.3//EN"
    "http://java.sun.com/dtd/web-app_2_3.dtd">
    <web-app>
    </web-app>someone kindly help me with this.........

    hi, my problem is bit diffrent.
    i m trying to achieve a login procizer in JSP and using JSTL c and sql library. MySQL as database solution.
    most of the things are working fine but i want to add confirm password in registeration form. and i do not know how to compare two string.<%@ taglib uri="http://java.sun.com/jsp/jstl/sql" prefix="sql" %>
    <%@ taglib uri="http://java.sun.com/jsp/jstl/core" prefix="c" %>
    <c:if test="${param.submitted}">
         <c:if test="${empty param.name}" var="noname" />
         <c:if test="${empty param.pw}" var="nopw" />
    <c:if
    test="${not (noname or nopw or requestScope.takenName)}">
    <c:set value="${param.name}" var="name" scope="request" />
    <c:set value="${param.pw}" var="pw" scope="request" />
    <c:set value="${param.cpw}" var="cpW" scope="request" />
    <jsp:forward page="doRegister.jsp" />
         </c:if>
              </c:if>
    <html>
    <head>
    </head>
    <body bgcolor="FCDBE4" >
    <form method="post" name="frmRegister">
    <input type="hidden" name="submitted" value="true"/>
    <script type="text/javascript">
    <!--
         function add_onclick() {
              var TRUE = new Boolean("True")
              var FALSE = new Boolean("False")
              blnError = FALSE
              strError = "The following problems were found in your registration form: \n\n"
              if (frmRegister.name.value == "")
                        blnError = TRUE
                        strError = strError + " - You must provide a Login Name\n"
              if (frmRegister.pw.value == "")
                        blnError = TRUE
                        strError = strError + " - You must provide a Password\n"
              if (frmRegister.cpw.value == "")
                        blnError = TRUE
                        strError = strError + " - You must confirm your Password\n"
              if (frmRegister.pw.value != frmRegister.cpw.value)
                        blnError = TRUE
                        strError = strError + " - Your Password does not match\n"
              if (blnError == TRUE)
                        strError = strError + "\nPlease correct these mistakes and try again."
                        alert(strError)                    
              else
                        frmRegister.submit()
         //-->
         </SCRIPT>
    <p align="left"><b> Register <hr> </p>
    <p align="center"><b>Please complete the following registration form</b>  <hr><br><br>
    <img src="dmu.jpg" alt="DMU University" align="left">
    <img src="dmu.jpg" alt="DMU University" align="right">
    <table BORDER="0" ALIGN="CENTER" VALIGN="TOP" CELLPADDING=2 CELLSPACING=0>
    <tr>
    <td><Strong>Username</strong></td>
    <td><input type="text" name="name" value="<c:out value="${param.name}" />"
    />
    </td>
    </tr>
    <tr>
    <td><Strong>Password</strong></td>
    <td> <input type="password" name="pw"  value="<c:out value="${param.pw}"/>"
    />
    <tr>
    <td><Strong>Confirm password</strong></td>
    <td> <input type="password" name="cpw"  value="<c:out value="${param.cpw}"/>"
    />
    <tr><td>�</td>
    <td><input type="submit" value="register"LANGUAGE=javascript onclick="return add_onclick()" />
    </td>
    </tr>
    </table>
    <img src="dmu.jpg" alt="DMU University" align="left">
    <img src="dmu.jpg" alt="DMU University" align="right">
    </form>
    </body>
    </html>doRegister.jsp
    <%@ taglib uri="http://java.sun.com/jsp/jstl/sql" prefix="sql" %>
    <%@ taglib uri="http://java.sun.com/jsp/jstl/core" prefix="c" %>
    <sql:setDataSource
         dataSource= "????"
         scope="session"/>
    <sql:transaction isolation="serializable">
         <sql:query var="result" >
              select username from rptable where username=?
              <sql:param value="${requestScope.name}" />
         </sql:query>
         <sql:update>
              insert into rptable(username,password) VALUES (?,?);
              <sql:param value="${requestScope.name}" />
                   <sql:param value="${requestScope.pw}" />
         </sql:update>
    </sql:transaction>
    <c:set var="user" scope="session" value="${requestScope.name}" />
    <jsp:forward page="prelogin.jsp"/>both script is working but when i try to not confirm password still it goes to the database because i do not use anythinh which compare them ad then if yes then go inside or give a error message.
    can anyone help me to do this..
    thanks in advance.

Maybe you are looking for

  • How good is the N97 for you to replace your multip...

    Hi, a quick question for anyone who has an N97 and using it for more than communication. I have had a Nokia of all types (6310i, N71, 6680 etc) for almost 10 years and two weeks ago, I decided to upgrade to the N97 (cost: Euro269 with Vodafone Irelan

  • Premiere Pro CC 14 won't quit or open projects

    Hi- Here is my situation.  My HD crashed in my iMac last week and it has been replaced by Apple.  I've now reinstalled all of my apps.  Everything seems to be working fine except for Premiere.  I can open Premiere, open a project and it loads fine. 

  • How can i upgrade my mac os x 10.6.8 to snow leopard ?

    How can i upgrade my mac os x 10.6.8 to snow leopard ?

  • Cell with boolean value not rendering properly in Swing (custom renderer)

    Hello All, I have a problem rendenring boolean values when using a custom cell renderer inside a JTable; I managed to reproduce the issue with a dummy application. The application code follows: import java.awt.BorderLayout; import java.awt.Dimension;

  • Printing too many copies

    I have a g5 printing to an HP 5550 with OS X 10.3.9. I've downloaded the most recent driver from hp and installed it after removing the printer. The g5 prints the same copy over and over to the printer, but doesn't do that with any other printer. No