Photoshop CS6 memory leak when idle and nothing open
Photoshop CS6 runs away with memory after being used and then going idle. If I open up PS and leave it, it will be ok but as soon as I open any file it will go up in memory usage (which is normal) but when I close all files and hide PS the memory will stay high never goes back down. When I close PS and re-open (no files open) again it idles at 300Mb memory but when I open a file then close it and then hide/idle PS it raises and stays around 1.25-1.5 GB if not more.
I have tried to Purge All, and even hide all menus to no avail. I have even tried to close Suitcase (eleminiate any font issues) and still same problem. I am running PS bone stock, no extra plug-ins.
Any ideas on why it would be doing this would be greatly appreciated!
My Computer:
Photoshop 13.0.1
MacBookPro
OS 10.6.8
CPU: 2.66 GHz Intel Core 2 Duo
Mem: 4 GB 1067 MHz DDR3
HD: 300GB (30GB Free)
Photoshop is not supposed to free memory when you close documents -- that's normal, because the memory gets reused.
Yes, opening a file makes the memory usage go up - because space is needed for the document and it's window.
None of what you said describes a leak, and sounds like perfectly normal behavior.
Similar Messages
-
Photoshop CS6 memory leak?
PS currently takes 1.7GB of memory AFTER I have closed all the files. I have no plugins. The only thing that helps is restarting PS. Any thoughts? thanks
Thanks for the help. I am still a little confused. I did a search on "history, undo stack, temp memory" and nothing came up. Could you just tell me logic then?
I don't understand:
The memory will be reused - and AFAIK released if the OS requests it.
This is all for speed reasons.
It is never released and it absolutely does slow down my computer. Previous versions of PS never did this. -
Photoshop CS6 Memory Leaking Problem
Adobe CS6 extended is using between 3.1GB - 9.8GB of ram.
It doesn't stop when i close all the psd files, only frees up when i close the program.Open Photoshop. Photoshop (Mac) or Edit (Windows) > Preferences > Performance. Reduce the Allocated memory (RAM) for Photoshop.
-
Photoshop CS6 crashes all the time and especially when using the type tool... please help!
Since I did not have this problem with CS5 or CS4, I can only assume something is not right with Photoshop CS6... below is my video card info:
ATI Radeon HD 4850:
Chipset Model: ATI Radeon HD 4850
Type: GPU
Bus: PCIe
PCIe Lane Width: x16
VRAM (Total): 512 MB
Vendor: ATI (0x1002)
Device ID: 0x944a
Revision ID: 0x0000
ROM Revision: 113-B9110C-425
EFI Driver Version: 01.00.383
Displays:
iMac:
Resolution: 2560 x 1440
Pixel Depth: 32-Bit Color (ARGB8888)
Main Display: Yes
Mirror: Off
Online: Yes
Built-In: Yes
Connection Type: DisplayPort
Cinema HD:
Resolution: 1920 x 1200
Pixel Depth: 32-Bit Color (ARGB8888)
Display Serial Number: 2A80273WXMN
Mirror: Off
Online: Yes
Rotation: Supported -
Photoshop CS6 keeps crashing when I try and change brush colour
Hi, my Photoshop CS6 keeps crashing when I try and change brush colour. I use layer masks a lot and consequently need to switch between black and white brushes. CS6 crashes a lot and gets closed by Windows 7 when I either click in the icon to swap brush colour or press the X keyboard shortcut. It's driving me crazy. I run Windows 7 on a high spec Dell PC. The problem has only started a couple of months ago, had CS6 since it came out. Can I advise me please? Thanks.
Please read these and proceed accordingly (restoring Preferences after making sure all customized presets like Actions, Patterns, Brushes etc. have been saved might be of special interest):
http://blogs.adobe.com/crawlspace/2012/07/photoshop-basic-troubleshooting-steps-to-fix-mos t-issues.html
http://forums.adobe.com/docs/DOC-2325 -
I installed photoshop cs6 in my new computer and when it asks me for my serial number I write it but it wont accept it
There are two steps when entering a serial number:
When you enter it in the 24-digit field, you should see a green checkmark. If you see a red x, you may have mis-typed the number, as Ben pointed out, it could be for a suite instead of a standalone product.
If it takes the number and installs, then activation is the next step. If it fails to activate, you may have exceeded your activations or the number might have been retired.
In that case, contact Customer Care with proof of purchase.
Contact Customer Care -
Photoshop CS6 has encountered a problem and needs to close
I just download cs6 photoshop, I can successfully download the program but when I try and open it up I get an error that tells me "Adobe Photoshop CS6 has encountered a problem and needs to close. We are sorry for the inconvenience." I uninstalled photoshop and re installed it hopping this would work but it didn't. This is the error signature that is pulling up. also ran adobe support advisor and it found no problems. My system is xp version 2002 with service pack 3
Not much luck I'M afraid tried to understand all that was there this is all I could come up with, dose it help at all?
0000: 41 70 70 6c 69 63 61 74 Applicat
0008: 69 6f 6e 20 46 61 69 6c ion Fail
0010: 75 72 65 20 20 70 68 6f ure pho
0018: 74 6f 73 68 6f 70 2e 65 toshop.e
0020: 78 65 20 31 33 2e 30 2e xe 13.0.
0028: 30 2e 30 20 69 6e 20 70 0.0 in p
0030: 68 6f 74 6f 73 68 6f 70 hotoshop
0038: 2e 65 78 65 20 31 33 2e .exe 13.
0040: 30 2e 30 2e 30 20 61 74 0.0.0 at
0048: 20 6f 66 66 73 65 74 20 offset
0050: 30 31 32 33 37 38 62 62 012378bb
0058: 0d 0a ..
Just came up with this also;
OS Name
Microsoft Windows XP Home Edition
Version
5.1.2600 Service Pack 3 Build 2600
OS Manufacturer
Microsoft Corporation
System Name
HAYWOOD
System Manufacturer
Compaq Presario 061
System Model
PX786AA-ABA SR1500NX NA530
System Type
X86-based PC
Processor
x86 Family 6 Model 10 Stepping 0 AuthenticAMD ~1999 Mhz
BIOS Version/Date
Phoenix Technologies, LTD 3.14, 3/9/2005
SMBIOS Version
2.4
Windows Directory
C:\WINDOWS
System Directory
C:\WINDOWS\system32
Boot Device
\Device\HarddiskVolume2
Locale
United States
Hardware Abstraction Layer
Version = "5.1.2600.5512 (xpsp.080413-2111)"
User Name
HAYWOOD\Compaq_Owner
Time Zone
Eastern Standard Time
Total Physical Memory
1,024.00 MB
Available Physical Memory
352.92 MB
Total Virtual Memory
2.00 GB
Available Virtual Memory
1.96 GB
Page File Space
2.26 GB
Page File
C:\pagefile.sys -
Hello. I am running Photoshop CC 2014 on a MAC with OSX LION. I also have Photoshop CS6 installed. When I double-click on a file in Bridge CC, it always opens in CS6. If I say "OPEN WITH Photoshop CC 2014", or if I drag the file directly to CC 2014 in the Dock it will open in CC. Since I like to double-click or hit return in the bridge, I am constantly having to wait until the file opens in CS6, quit CS6 an then open it another way to get it into Photoshop CC 2014. I tried to disable CS6 by hiding it, but then double-clicking Bridge did nothing. Any ideas why this is happening?
Check and adjust the File Type Associations in the bridge cc preferences.
-
Photoshop CS6 shuts downs when using the move tool
Photoshop CS6 shuts downs when using the move tool. It seemas to run fine until i try and use the move tool. PS worked fine just a few weeks ago and now it has this issue. What can i do to resole this issue?
Thnaks,
System Specs
Windows XP Home SP3
AMD Atholon 64 X2 Dual
2GB RAM
Video Cards
Radeon 7200
NVIDIA GeForce 8400GSTwo displays are OK on one adapter, Two displays adapters are not OK. http://helpx.adobe.com/photoshop/kb/gpu-opengl-support-photoshop-cs4.html
7. If you are using more than one video adapter, remove the additional cards.
Multiple video adapters can cause problems when OpenGL and Photoshop use the GPU. It's best to connect two (or more) monitors into one video adapter. If you have to use more than one video adapter, make sure that they are the same make and model. Also make sure that they both support the same versions of OpenGL and Shader Model. Otherwise, crashes and other problems can occur in Photoshop.
Note: Using two video adapters does not enhance Photoshop's performance. -
I am trying to save a photoshop CS6 psd file to jpg and get an option jpg, jpg2000 or jpg stereo, I choose jpg and then Mac 256 colours, normal or interlaced. I just want regular jpg with a high resolution. What am I doing wrong? , never had this problem before. Help!!!
Your description of the issue is not clear:
What format, bit depth and color was your original file "from the net"? It sounds like it was a Color Indexed GIF, which would cause what you are describing.
In the Macintosh Finder, select said "net image" and do a Get Info on it (Command+i). When the Info box appears in the Finder, take a screen shot and upload it here by using the little camera icon in the Reply Editor in the forum's web interface.
If the image is a 256-color GIF, remember the rule: GIGO = garbage in, garbage out. -
Hi installed Photoshop Cs6 on my Vista os and is crashing the Photoshop and gives following error DEP (Data Execution Prevention) can someone help me..
no I did not receave any errors during instalation. Yes I installed it before but occured same problem so I unstalled and made a new isntall.
I found these in the end of the log hope these helps.
Please search the above error/warning string(s) to find when the error occurred.
These errors resulted in installer Exit Code mentioned below.
[ 4460] Fri Nov 02 19:54:12 2012 INFO
Exit Code: 0 - No error.
Please see specific errors and warnings for troubleshooting. For example, WARNING: DF029, DW024 ...
*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*
END - Installer Session
*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=* -
Memory Leak when running Contacts
I am having a big memory leak when running the app Contacts on a MB Air. It gobbles up 2 GB of ram in just a few minutes forcing a reboot. I have re-installed Mountain Lion 10.8.2 and it still leaks memory. Watching Activity Monitor shows the rapid increase in Ram being gobbled up by Contacts. Used Mackeeper to clear cache as well as ran Cocktail, all to no avail. Any tips would be greatly appreciated.
The size of oracle.exe is not an indication of how the Java VM GC works; so you are not comparing apples to apples. It'll be too long to explain here but in my upcoming book (see hereafter), I gave a detailled explanation of the various memory areas the Java VM uses and how these are GCed and also how you can meausre their size (not all, though).
In short you want to use OracleRuntime methods such as
OracleRuntime.getSessionSize(); --> get he current size of Sessionspace
OracleRuntime.getNewspaceSize(); --> get he current size of Newspace
there are other memory areas described in the book
http://www.oracle.com/technology/pub/articles/mensah_dws.html
http://www.elsevier.com/wps/find/bookdescription.cws_home/706089/description#description
Sample chapter: http://www.oracle.com/technology/books/pdfs/mensah_ch1.pdf
Kuassi -
Getting files from a business that uses Photoshop CS6. I use CS3 and have text problems
Hi, I'm getting files from a business that uses Photoshop CS6. I use CS3 and when I edit the text, the text moves to a different location even off screen.
Anyone know how to fix this?
It makes it hard to copy the text and imposible to change the color or make corrections.
This just started when they went to Photoshop CS6.
Thanks,
JefferyAsk the folks supplying you with files whether they've updated to the latest version... There were problems with Photoshop CS6 13.0.0. saving text layers in jumbled-up fashion.
-Noel -
App Memory Leak When Open iPhoto
Hi everyone,
Does anyone have experienced app memory leak when open iPhoto? My free memory immediate dropped from 5000 mb to 15mb when I open iPhoto and the app never open. If I force to quit iPhoto, all return to normal and everything work fine. I only have iPhoto app running, not sure what caused the memory leak???
Looking for help.
Thanks
JHMLActually the new library was a test to see if the problem occurred only with your current library or with all libraries. The fact that switching libraries cleared up the problem is just serendipitous.
-
Memory leak when using Threads?
I did an experiment and noticed a memory leak when I was using threads.. Here's what I did.
======================================
while( true )
Scanner sc = new Scanner(System.in);
String answer;
System.out.print("Press Enter to continue...");
answer = sc.next();
new TestThread();
========================================
And TestThead is the following
========================================
import java.io.*;
import java.net.*;
public class TestThread extends Thread
public TestThread() { start(); }
public void run() { }
=====================================
When I open windows Task Manager, every time a new thread starts and stops, the java.exe increases the Mem Usage.. Its a memory leak!? What is going on in this situation.. If I start a thread and the it stops, and then I start a new thread, why does it use more memory?
-BrianMoveScanner sc = new
Scanner(System.in);out of the
loop.Scanner sc = new Scanner(System.in);
while (true) {
That won't matter in any meaningful way.
Every loop iteration creates a new Scanner, but it also makes a Scanner eligible for GC, so the net memory requirement of the program is constant.
Now, of course, it's possible that the VM won't bother GCing until 64 MB worth of Scanners have been created, but we don't care about that. If we're allowing the GC 64 MB, then we don't care how it uses it or when it cleans it up.
Maybe you are looking for
-
How can I change a document from booklet to single pages
How can I change a document from booklet to single pages?
-
G/l account while posting stock
hi guru's my problem is while posting the stock in mb1c i am getting G/L account 799999 doesnot exit in the company code 1978 i have copied the co code 1978 from standard co code 1000 chart of account INT. where as chart of account INT (material mana
-
Using AcrobatPRO 8.2.3 on a MAC, Trying to create a PDF Form to email to potential customers. I have two basic issues. Locally (on my MAC) everything works perfectly, even the "submit" button, and it emails the PDF just fine. However, when I send the
-
I purchased the Dark Knight with the digital copy. It started out okay, I entered in the code but then itunes said I wasn't it connected to the store. I tried a couple with no success when it said the code doesn't work anymore. It shows up in my purc
-
How to create Process level configuration for RFx N-step approval in SRM7.0
Hello experts, Can any body guide me to create the Process schema for N-level approval in RFx. My requirement is based on RFx target value, Document type N some custom fields like (Mode of Tendering). For this purpose, we are going to maintain one cu