Photoshop Elements not working right after not using for several months?

Have Photoelements #10 on this computer. Have been away, using #10 on another computer, now back and PhotoElements #10 is NOT working properly?

Hi,
Please try couple of probable solutions as mentioned below:
Solution 1:
1. Close Elements.
2. Launch the Photoshop Elements Welcome Screen and hold down ctrl + alt + shift as you click Editor.
3. Continue to hold the keys until you see a message box asking if you want to delete Photoshop Elements settings file; click Yes. Elements will open with default preferences.
Solution 2: In case any network printer is attached try to launch without network or printer uninstall or make different printer as default.
Solution 3: Try launching with anti-virus off or removing PSE from conflicting list.
Solution 4:
On the drive on which you have installed PSE,on my machine it is on C:
Go  to C:\Program Files\Adobe\Photoshop Elements  10\Locales\<locale>\Plug-Ins\Import-Exportand you will find twain  plug-in. Remove that plug-in from that location and copy it somewhere  else.
Now launch PSE and check if it works.
For related post for Twain please see this:http://forums.adobe.com/message/2954743#2954743
Thanks,
Garry

Similar Messages

  • My on off button on my iPhone isn't working and it has been for several months but i went to the apple store today and the warranty was only 16 days over is it possible to get it fixed for free

    my on off button on my iPhone isn't working and it has been for several months but i went to the apple store today and the warranty was only 16 days over is it possible to get it fixed for free

    If the genius at the Apple Store did not offer repair under warranty then NO
    12 months is 12months asume you did not have AppleCare

  • Safari 5.1.2 Not working right after install

    Hi, after installing the update for Snow Leopard safari is not working right. Some pages don't load, and other don't load correctly.
    I have to keep hitting refresh two or three times. Also thunbnails are not displaying. Even the apple page comes up looking buggy.
    Please help!

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It won’t solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of this exercise is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login. First, disconnect all wired peripherals except keyboard, mouse, monitor, and Ethernet, if applicable. Boot in safe mode and log in as yourself. The instructions provided by Apple are as follows:
    Be sure your Mac is shut down.
    Press the power button.
    Immediately after you hear the startup tone, hold the Shift key. The Shift key should be held as soon as possible after the startup tone, but not before the tone.
    Release the Shift key when you see the gray Apple icon and the progress indicator (looks like a spinning gear).
    During startup, you will see "Safe Boot" on the login screen, which appears even if you normally log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Safe mode is slower than normal, and some things won’t work at all, perhaps including wireless networking on certain Macs. If you usually connect to the Internet via WiFi, and it doesn’t work in safe mode, connect using an Ethernet cable. If you can’t do that, reboot as usual (i.e., not in safe mode) and perform a safe login, as follows: Enter your credentials at the login screen, then hold down the shift key and click the “Log in” button. Keep holding the key until the menu bar appears. In this mode, your login items, among other things, won’t load.
    In safe mode, test again. Same problem(s) now?
    After testing, reboot (if you booted in safe mode) or log out/log in (if you performed a safe login) as usual.

  • OKCupid app. notifications not working right after iOS5 installed

    The OKCupid app. notifications is not working properly since I installed iOS 5.
    Worked fine before I installed iOS 5 - now does not right.
    Used to work right, and I got notifications, but no longer.
    Anyone else experiencing similar problems?
    Anyone got a fix for this?

    Yes I have just found out I have to scroll the page up and down instead of tapping on the button like before.
    They think we are mind readers.

  • Ipod 5 flash not working right after the update

    Hi first off: my flash was perfect before the update so I think its not hardware?
    - after the update yesterday today my friend and I tried to take a selfie in a dark place so we wanted to use the back camera and turned the flash as ON for our surprise it didnt work.
    - we tried then to take something else's pic and the flash worked
    - we tried the selfie again this time using the camera buttom not the volume's but didnt work.
    - we used hipstamatic and VSCOCam then and it worked perfectly
    - I tried turning on and off the device and did not work.
    - I did a full restore through Itunes and didnt work.
    anybody else having this problem?
    any suggestion to fix it?

    I contacted apple and they claimed it to be an obvious software bug, they said I had to take it to an assistence to get a new one intantly but as theres no assistence in my town and I cant go to nearby one I will have to just replace the stock app for a better one... once more I'm disapointed with apple.

  • I have a copy of Adobe Photoshop Elements 11 that I have been using for a few years and all of a sudden it is as to upgrade and not letting me move forward. I uninstalled it and reinstalled it and now it is saying that the serial number is invalid.

    Not sure why this could happen

    Moved to Photoshop Elements Forum http://forums.adobe.com/community/photoshop_elements
    Select a topic, then click I STILL NEED HELP to activate Photoshop Elements Online chat
    -http://helpx.adobe.com/contact.html?product=photoshop-elements or
    http://helpx.adobe.com/photoshop-elements/kb/troubleshoot-installation-photoshop-elements- premiere.html

  • Trackpad Still not working right after replacement

    I've recently been having issues with my trackpad on my Macbook Pro, i took it to the apple store last week and they replaced it due to it not registering physical clicks what so ever. However, although a new trackpad was issued/replaced and the problem is slightly better, the trackpad is still not working/registering physical clicks in several areas, anyone got any tips? I also can't really afford to go back to the store again at the moment, however i do have Apple Care which may open more windows for me?
    Thanks

    Welcome to Apple Discussions!
    You might try a SMC reset:
    http://support.apple.com/kb/HT1411?viewlocale=en_US
    If no joy, call Apple on the phone and tell them the situation. They will try to troubleshoot it over the phone and should be able to advise you as to what to do.
    Good luck!

  • Apple In-Ear Headphones not working right after a month

    i bought them last month and used them 3 times a week (max).
    today, the right headphone doesnt work right and i bearly hear when it's on max.
    (BTW the lest is fine)

    deggie's right--take 'em back. If they're a only month out, they are under warranty and should be replaced.
    Best of luck!
    Doc

  • Tried to sing into my ipad after not using for several months.  it asked me for a 4 digit passcode, can't recall having to do that before.  tried some common ones i use.  it finally locked up.  what do i do?

    after several months not using it, i tried to start up my ipad.  it asked me for a passcode (4 digit).  after i tried some possible ones, it locked me out.  what do i do??

    Recovery Mode Step by Step
    1. Hold Sleep/Wake button down and slide to turn off iPad
    2. Turn on computer and launch iTune (make sure you have the latest version of iTune)
    3. Plug USB cable into computer's USB port
    4. Hold Home button down and plug the other end of cable into docking port. Do not release button until you see picture of iTune and plug.
    5. Release Home button.
    On Computer
    6. iTune has detected iPad in recovery mode. You must restore this iPad before it can be used with iTune.
    7. iPad Recovery Mode on computer screen
    8. Select "Restore iPad"...

  • Macbook Pro not working right after getting it back from Apple Store

    I had to bring my last generation Macbook Pro into the Apple store to have a faulty optic drive and logic board replaced. I just got home and the date in the preferences was set to 2001 and it will not connect to my network, even though I am typing this on another Mac using the same connection. It does see it, it just shows a message with an exclamation mark in the Airport area saying no internet connection.
    Any ideas of what I may need to do? Are both of these a sign that they may have messed something up? I did reboot it after getting it back.
    Thanks.

    Just bring it back. Have them check it out and demonstrate that it's working properly.

  • Right arrow & ALT key not working right after clean install of XP Pro

    My 3000 N100 stopped booting so I had to reinstall. Had a full license for XP Pro that I wasn't using yet, so decided to do a clean install.
    Am still working on getting various things working (e.g., audio), but at the moment the biggest irritations are the following:
    1) My right arrow is disabled completely.
    2) The ALT+TAB combo doesn't work properly. When I do it in Firefox, for example, it does some sort of scrolling down-screen.
    Anyway, to isolate the problem, I tried plugging in a USB keyboard. With that keyboard, everything appeared to work fine.
    Now, before you tell me that it's just something under the keyboard (which was replaced shortly before the crash, so I doubt that's the problem) keep in mind that the ALT+TAB *does* do something (and not the simply TAB alone), which leads me to suspect the problem lies in how the ALT key and the right arrow key are mapped.
    Any ideas?
    Could this be related to a driver that I still need to install? (My device mgr still has a bunch of things with question marks.)
    Thank in advance.

    exscentric wrote:
    Did you look in the list of campatibility problems windows 8 generated to see if the touchscreen is included.
    You did not say whether it came with win 8 and it whether it worked before.
    I have a b320 and the touch is not compatible with win 8 and it works for general stuff but won't bring the charm list in from the side nor work in the left corners, nor some of the swipe features.
    No drivers for the b320 yet.  Windows set it up with something that kind of functions.
    It did come with Windows 8 installed. It also came with CD containing Win8 Driver Pack v1.0. I installed all of the drivers from this CD.
    Where would I find this list of compatibility problems that you refer to?
    Thanks!

  • Not working right-will not let me type a new emall, pull contacts, also will not let me use wireless printer-kept shutting down windows.

    firefox will not let me type in yahoo mail as new email. will not pull up contacts. also, when I use wireless printer-it shuts down windows.

    Couple of points...
    DJ_Jynxx wrote:
    The thing is, this MUST be an Audition CC issue for two reasons. One, everything worked fine in CS6, which I was using right before I upgraded to CC. I even did a clean install of it by removing CS6 completely.
    All versions of Audition can co-exist on the same machine quite happily - there is no interaction between them at all, and the system was designed to be like this. So there's nothing to stop you keeping CS5.5, CS6, CC and even Audition3 on the same machine.
    The other thing I'm wondering about is Windows 8. There have been a considerable number of complaints about this doing weird things, including with Audition. I have a system that in many ways is very similar to yours, except that I don't overclock the mobo, and use a professional sound device (or two) with it (RME). The major difference though is that I use Windows 7 pro 64-bit, and I haven't had any of these problems at all. Yes I use it for a living, as well, but I don't bother with multiple DAWs - don't have time for all that these days. But I do use iZotope's RX software in its standalone mode without any difficulty.
    I'm not claiming that  Audition CC is trouble-free - any number of Mac users will confirm that - but people running it on W7 certainly seem to have far fewer problems with it. It may also be worth trying an uninstall-reinstall of CC - you never know. But differences in preview quality certainly point towards audio drivers, I'm afraid...

  • Plugin Check page not working right; after updating, plugin still shows "update"

    I noticed after running "find updates" that the Acrobat Reader
    plugin needed to updated, so I installed the 9.4.1 update, (from
    9.4.0). Afterwords, I rebooted the machine. I launched firefox and
    tried to verify all plugins were "update to date" but the same acrobat
    reader plugin is still showing as "update" (i.e., firefox thinks it's out
    of date).
    about:plugins shows the installed version as 9.4.1.222
    Moreover, multiple machines show this issue, not just one.

    There's a couple of things to try, since this is an old system.
    1 -- disable hardware acceleration in Flash Player, if enabled.
    a)  Go to this page -- http://www.macromedia.com/support/documentation/en/flashplayer/help/settings_manager02.htm l
    b)  Right click the Global Privacy Settings panel  "box".
    c)  Scroll down the drop down list and left-click on "Settings."
    d)  If you see a check in the small box next to "...hardware acceleration," click on it to remove it.
    e)  Save your setting change, close out your browser, open it again, and try watching a video to see if it stutters.
    2 -- disable hardware acceleration in Firefox, if enabled.  (This may or may not impact your ability to watch Flash videos, but it has caused a number of issues with older systems.
    a)  Click on your Firefox TOOLS menu
    b)  Click on OPTIONS
    c)  When the small screen pops up, click on the ADVANCED tab
    d)  If there's a check in the box next to "use hardware acceleration when available," click on it to remove the check
    e)  Click the OK button.  Close out Firefox, and reopen it.
    HTH,
    Ortho_Fan

  • Mac not working right after software update. Please Help...

    I turned on my computer today and first thing I was asked when I logged in was if I wanted to update my software because there is new updates available. So I click on update so my computer will stay up to date......Well big mistake Now I cant open my itunes, my safari, my quicktime player, or even my Microsoft word, everything is messed up I keep getting "program quit unexpectedly" from everything. I have been trying everything today to get my computer back to normal, but no luck. I have read something about "permissions not being compatible". I have no idea Im clueless I know nothing about computers. Please Help! I made a big OOOOOOps

    It finally powered on after 3 battery pulls, but now it does not make or receive calls (((
    Everytime I connect it to blackberry link it says software update available, so I clicked on install, it said downloading update and then nothing happens, the download bar becomes full then nothing changes
    I also tried to reload device software, i got a message saying checking repair software and it stayed like that for 3 hours then the device rebooted but nothing happened at all
    I even tried redoing the software update from the phone itself 3 times, everytime it would say update successful but the phone would still not make or receive calls
    Please help I dont know what to do....could the problem with blackberry link be that im using it on a mac??
    I appreciate your help

Maybe you are looking for