Photoshop trial cs6 on windows xp will not startup
I downloaded the photoshop cs6 trial on my computer running windows XP and I am getting an error message and the program continuously force closes after loading. What do I do?
Do you get any particular error message?
Have you installed some other CS software and does that run properly?
I'm sure it is, but could you also check that your XP is fully patched and is at SP3 level. Windows XP SP3 is required: http://www.adobe.com/products/photoshop/tech-specs.html
Similar Messages
-
How to get Elements 10 to open in Windows 8 ?
See the error message quoted above in the subject line.See this help document:
https://helpx.adobe.com/photoshop-elements/kb/microsoft-c-runtime-error-launcing.html -
I JUST PURCHASED A HP LASERJETPRO P1102W BUT THE PRINT DIALOG WINDOW IN CS6 IS DIMMED AND WILL NOT ALLOW COLOR SEPARATIONS TO BE PRINTED?
Save as a PDF and print the separations out of Acrobat.
-
The Elements 12 Mac disk works fine - I also have a Dell, and the Windows disk will not run at all, sounds like it's grinding, and is almost impossible to remove from the hard drive. I cannot find any place to tell me who to CALL to ask for a replacement!
Hi Samcat,
You can use a download instead of the disk as an alternative: Adobe - Download free trial version Adobe Photoshop Elements 12 | Adobe you can license with your serial
Please test the disk in another windows machine to check if it's caused by the drive or the disk. If you tested with 2 drives please start a support case, i assume Adobe will only provide downloads at this point. They are the same as the trials. If you still need a disk you can burn the trial to a disk as a backup disk. Good luck! -
In Design CS6 Quit Unexpectedly and will not start back up, even after restarting computer. Tried to do a CS6 re-install. It finished and said ready to use, but still getting same Unexpected Quit and In Design will not work. Did not "Un-install CS6 first" Should I try installing CS6 again, un-installing version on computer first?
Hi Ivesprepress,
You might also try resetting your user preferences
You can delete the replaceable InDesign SaveData and InDesign Defaults files by holding down the following keys while InDesign is launching:
Windows: Shift+Ctrl+Alt
Mac OS: Shift+Control+Option+Command
Taken from: InDesign preferences and support file locations
- Dave -
iTunes 11.2.2 for Windows x64 will not successfully install. Removed prior iTunes, and still will not install. 10.7 installs just fine, but constantly asks to upgrade to 11.2.2. Any Thoughts?
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
The section Install missing components has advice on breaking down the iTunes installer into the individual .msi files which might prove useful if one component won't install normally.
If needs be, the Microsoft Program Install and Uninstall Utility (MS Installer "Fixit") may be able to help force through the installation.
tt2 -
Hello,
Often, the Firefox app will close, but the underlying Windows process will not and cannot be stopped via Task Manager. When this happens, Firefox can no longer be used...the system must be rebooted. This happens especially when many apps are running but even though there are plenty of memory resources available.
I have tried to find if something is using Firefox in the background, but have no way to know what that would be.
Their are no apparent viruses detected.
Firefox is version v5.0 and occurred in earlier release.
System is Windows 7 (64bit).well, it's not the same hardware and it's a bit different.
I managed to pass that stage somehow but I still have a problem
I don't use the built-in creator tool that comes with Spyrus as it doesn't know how to append a pre-staged media that was created by SCCM that should apply the Windows file system to a second partition and the WinPE to the first partition.
I managed to do everything. my only problem is that the WTGCreator that comes with SCCM 2012 R2 creates the 350MB partition with FAT32 file system.
when I boot from the device I get the WinPE, I can choose a task sequence and then it fails when trying to apply the wim file. the error tells me that the 350MB partition is FAT32 which is not supported (even though it chooses the second partition, which
is all the rest of the disk space)
what I did was adding another task that converts the 32 Fat partition to an NTFS partition and then the process continues and finishes successfully! but that's a workaround.
I'm trying to make this process as smooth as possible without having additional steps
Tamir Levy -
Windows 8 will not activate with new SSD (second) hard drive
I added a new SSD drive in the second hard drive bay. I used the HP restoration media to install Windows 8 on the new SSD drive. Windows 8 will not activate. After spending 90 minutes on the phone with HP support (and paying $150), they told me to contact Microsoft. After spending some time with Microsoft, they told me that the Windows product key is being locked by HP, and there is nothing they can do.
Hi badgerbuzz,
I have brought your issue to the attention of an appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publically post ( serial numbers and case details).
If you are unfamiliar with how the Forum's private message capability works, you can learn about that here.
Regards,
George
I work for HP -
Windows 8 will not progress further than 66%?
Windows 8 Will not Progrees further thaan 66% on Bootcamp installation......any ideas?
maybe you made the partition too small?
maybe the dvd is corrupt ? -
Windows 8 will not boot, gives Bad_System_Config_Info error.
It will not boot from disk, let me refresh, or let me reset my windows system.
A couple of times i have gotten windows to boot from the disk and it asks if i want to instal windows 8 or there is a tab to repair my computer.
Should i just go ahead and click instal windows 8, and then backup that fresh instal with my backup drive?
Or will this complicate the problem?.........
I am running OS X 10.8.3 Macbook pro retina
Thanks
ToddWow, how about you guys just answer the dude's question instead of posting useless garbage. thanks for wasting everyone's time.
The only way I know of fixing this right now is unfortunately by doing a clean install. Thats not to say however that you won't run into the same problem down the road. To be honest, even tho Templeton's answer was useless, he's right. Seven is currently way more stable. -
There is a 3 inch section of the window that will not respond or recognize the mouse. It will not let you click on the icons or screen in any way. This is the only program we are experiencing this problem with.
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode
*https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes -
Windows xp will not boot up after installation of desktop software 4.3.
windows xp will not boot up after installation of desktop software 4.3. Where do I start to get my p.c. going again ???
I get the message that a recent hardware or software change might have caused this.
The computer does not boot up in safe mode or last known good configuration.
I'm glad you think the software has nothing to do with it, but perhaps you can also explain why this problem started as soon as I downloaded the desktop software and tried to restart the computer. -
Windows 7 will not let me update the driver for my iphone 4s so I can see it in iTunes. Any suggestions?
You turned off all firewall and antivirus ? You could try downloading the update via a browser - what device are your trying to download the update for ? If it's an iPhone 4 :
GSM / sim card model
CDMA model
Then in iTunes press and hold the shift key on Windows when clicking the Check For Updates button which should let you navigate to the downloaded file -
Paid for Photoshop Touch for iPad but it will not download and install
I paid for Photoshop Touch for iPad2 but it will not download and install
ibarrien
I tried to download from App Store directly to iPad2. I and I have an icon on the desk top but it is greyed out. When I go back to the install page the box saya "installing" but that is also greyed out. Pushing the U[date button brings up a message "Photoshop TOUCH CANNOT BE INSTALLED AT THIS TIME.RETRY' how ever many time I retry I get the same message. Harry2320468
Thanks
harry -
Adobe Photoshop Extended CS6 for Windows (Single User Educational License): Are you planning to discontinue this product? If so, when?
Adobe offers students teachers the Creative Suite for $20 a month. If you only want Photoshop Adobe advises students and teachers to get the Photography Subscription for $10 a month you can install Photoshop CS6, Photoshop CC, Photoshop CC 2014 and Lightroom.
Maybe you are looking for
-
Printing problem with Adobe Reader 8.1.1 on Gutsy
Hello, I have installed the new Adobe Reader 8.1.1 as a deb from Adobe site? It is fast and works nicely except for printing where there is a problem : Acroread always seems to print in portrait - this happens whether I have "Auto rotate and centre"
-
1) What is partner function exclusion? 2) Which all tables are affected when we exclude partner function using BAPI 'BAPI_BUPA_FRG0070_ADD' waiting for a prompt response.
-
I have a bothering sms problem with my curve..
model curve 9360 os bb 7 when i read messages and decided not to make any reply my phone sending a message to that person saying "i'll get back to you soon" without my knowledge and i would only know it if the person asked why i texted that its bothe
-
Msi mega 180. serial for media center III?
Just bought a mega 180. Where do I find the serial for media center III software? Couldn't see anything in the manual. Thanks Simon
-
Just updated to 8 & now I can not open any web pages as well as firefox will not close out, it still running in the background after browser was closed. I uninstalled and reinstalled as well as disabled add-ons and plugins nothing has changed, can I