Photosmart 3210 software will not install

Software will not install. Have downloaded four (4) times, twice with HP installer as recommended. Software will not install, just hangs after the extract process, no error messages, nothing. Software: AIO_CDB_Net_Full_Win_WW_130_141.exe
This is a new computer with a new Windows 7 professional 64 bit
This question was solved.
View Solution.

Hi,
What antivirus software do you have installed on your new PC?
What processor do you have for your PC?
You may find the processor by clicking the Start button, right click Computer and select Manage.
Click on Device Managr and expend the Processors tree, there you will find it listed.
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Similar Messages

Photosmart A software will not install on Windows 8.1

I have a Photosmart A536 printer and Microsoft Surface Pro 3 running Windows 8.1-x64.
The printer is connected and I see a CD drive HP_A530_series with a setup program. When
I run it I get a dialog telling me to go to the HP download site for my printer. I went there and
downloaded the driver for my O/S, (A530_140_301.exe. The file runs but all that happens is
the same dialog saying "please download the driver from the HP website". I have tried
redownload, reboot, run as admin, run in compatibility mode.
I went to this forum and found the suggestion to download the printer installation wizard,
hppiw.exe, and install and run it. I did so and it ran and said it was looking for devices and
then it exited with no action.
Please advise.

Hi @MKairys
Please look at the discrepancy between the compatibility listed, and the description of the file;
Description
Windows XP x64/Vista 64/Mac OS X v10.4-v10.5: Download includes HP Photosmart Software Driver and support links for product. Windows XP 32/Vista 32/Windows 7 32 and 64: No software download for printer. Printer includes HP Quick Connect, which installs when you connect the printer to your computer.
^^ This makes no mention of Windows 8 or 8.1
Compatibility:
Microsoft Windows 8 (32-bit)
Microsoft Windows 8 (64-bit)
Microsoft Windows 8.1 (32-bit)
Microsoft Windows 8.1 (64-bit)
Microsoft Windows 8 Enterprise (32-bit)
Microsoft Windows 8 Enterprise (64-bit)
Microsoft Windows 8 Pro (32-bit)
Microsoft Windows 8 Pro (64-bit)
Microsoft Windows 8.1 Pro (32-bit)
Microsoft Windows 8.1 Enterprise (64-bit)
Microsoft Windows 8.1 Enterprise (32-bit)
Microsoft Windows 8.1 Pro (64-bit)
A530_140_301.exe
Perhaps this would be helpful; Problems printing from Surface can be caused by hardware issues like disconnected cables, software i... I have a feeling though that this may loop too, it says it is compatible then advices you install the free driver, and takes you back to the HP website - A530_140_301.exe. I feel your pain, I am going in circles!
I don't think there actually is a driver for 8.1. You could try an alternate print driver; How to Assign Alternate Print Drivers in Different Versions of Windows.
Please let me know what happens if you try an alternate print driver.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

Error 1310 on trying to install Adobe Acrobat X Pro. Software will not install.

In trying to install Adobe Acrobat X Pro from either a purchased DVD or from an Adobe download I get an Error message: Error 1310 and the installation will nor proceed. It asks to verify access to C:\Program Data\Adobe\ Adobe PDF\Distiller\Startup\example.ps. This complete directory is present in my C:\ drive. How do I verify this access and what must be done to successfully install Acrobat X Pro?

don't use email.
open your thread in a browser, Re: Error 1310 on trying to install Adobe Acrobat X Pro. Software will not install.
and click the camera icon to insert an image.

Airport extreme software will not install on vista, how can i still configure the router?

airport extreme software will not install on vista, how can i still configure the router? Trying to help someone with vista get an airpot extreme configured. 10.0.1.1 does not work, the software will not install correctly on their vista machine. How can I get into the base tation and lock it down?

Hi - Vista can be tricky - I need more info to see if I can be of some help - first, is the Vista machine a desktop or a laptop and is it fully up to date with Windows Update (sp2 or higher)? - next, are you trying to install Airport Utility version 5.5.3 which is the correct one for Vista? - and finally, what do you mean "it will not install" - what kind of error messages or evidence are you getting?

Driver software will not install

When trying to install drivers for my Officejet 200 MFP it will get to 77 % and fail. it says to reboot and try again have tried several times but get no further. Loading on a HP Pavillion gt4

Hi , Welcome to the HP Forums! I noticed that the driver software will not install for your HP Officejet 200 MFP printer on Windows 7. I am happy to look into this installation issue for you! What is your printer's Product/Model Number? (ie: HP Laserjet 200 MFP, etc.) To find your printer's Product/Model Number follow instructions in this link. Finding Your HP Product Model Number. As I am having a little difficulty locating the type of printer that you have. In the meantime, please try our HP Print and Scan Doctor, and let me know the outcome! Hope to hear from you soon! “Please click the Thumbs up icon below to thank me for responding.”

HP Photosmart 5515 software will not connect the printer to my laptop

hp photosmart 5515 printer is connected to my router but will not install on my laptop which is running windows 7 64 bit. I have tried installing wilrelessly and with usb but nothing will work. The printer wireless connections are all fine. Test prints from laptop and printer all work, I just can't install the software drivers completely, I can add printers ip address or name but it just goes back to same page.
I reciently moved house and before it was working. I can even print via iphone but not from laptop

Hello-
Check out the link below and pick what best describes your issue.
http://h10025.www1.hp.com/ewfrf/wc/documentSubCategory?tmp_rule=85341&tmp_task=solveCategory&cc=us&d...
Let me know how it goes.
Also, remember a click on the Kudos star to the left is a quick "Thanks" for a helpful post.
Please select the "Accept as Solution" button on the post that best answers your question.
I appreciate your input !
Thank You,
Donald

HP Photosmart C7200 series will not install on HP TouchSmart PC windows 7

I just bought a HP Touchsmart computer. I have a HP Photosmart C7200 series printer. The cd for this printer will not install because it does not support windows 7. Is there a fix for this.

Nanberg wrote:
I just bought a HP Touchsmart computer. I have a HP Photosmart C7200 series printer. The cd for this printer will not install because it does not support windows 7. Is there a fix for this.
Have you tried looking at the support pages for your printer? that's where you will find the drivers, not here.

Hp officejet pro 8500 software will not install properly on windows 7

i have attempted several times to install the hp solution center specifically for scanning to
save to .pdf files. hp solution center will not install error message:
cannot hp solution center because your device installation is not complete.
please plug in the usb cable or rerun the setup program from installation cd
for a network installation

infofablok,
Try downloading and running the print and scan doctor located here:
http://goo.gl/Ujpib
It can fix a lot on its own and if not give a better idea of what is going on. If it does not help make sure to post any errors given by the doctor. Additionally how is the printer connected to the PC (USB/Network Cable/Wireless/Etc)? Is this our first install of the printer and was it working previously for any other functions?
Best of Luck!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

I have an old airport express, but the software on my computer does not accept it. I need to downgrade the software, but the older software will not install.

I have a old G4, I want to give to my son. It does not have a wireless card and because his room is on the second floor it is impossible to connect with a wire.
I wish to add an airport express to my airport extreme network and connect the computer and the airport express together with a cable. Is this possible?
second question:
software does not install.
I do have a network with a airport extreme and want to add the old airport express to it. I want to do this with airport software, however the software tells me the airport express is to old and i need to reinstall older software 5.6 to be precise. However installing fails, so I thought i just remove the airport software, but osx does not allow me to do that.

i managed to install the older airport utility and am trying to set up a connection with an existing network, but airport utility cannot find the airport extreme AFTER it starts up again. I then went and again restored it to its factory settings and did the whole procedure again with airport utility, but again after utility tells the airport express to restart it does not come back.

3005pr software will not install on Windows 8

Hi,
I am using a 3005pr port replicator on a Spectre XT 4010nr laptop running Windows 8
I was rupdating the software for the port replicator and the install prompted me to uninstall the previous version and I said yes. It had to reboot to complete the uninstall so I rebooted systems.
Now when I try to install the port replicator software I get the error:
"A previous uninstall of HP Port Replicator Software is not yet complete. Please reboot your computer and run this installer again to installation."
I've rebooted, powered off, confirmed the port replication software is not installed through ARP, confirmed the device is not listed in Device Manager. But still see the above error any ideas how to reinstall the software?
Thank you

Try the Windows Installer Cleanup Utility:
http://www.techsupportforum.com/attachments/windows-xp-support/6696d1147451985-cannot-uninstall-prog...

Hello, I am holding a Iphone 4. I have serious problems for the update of the IOS software 5. in fact this new software will not install. after several attempts, I have error messages 1602, 1604, 2009 ... Suddenly, the screen of my phone is stuck with the

****, I am holding a Iphone 4. I have serious problems for the update of the IOS 5 which will not install. atfer several attemps, ihave error messages 1602, 1604, 2009.

Wow, Karan Taneja, you've just embarrassed yourself on a worldwide support forum. Not only is your post ridiculous and completely inappropriate for a technical support forum, but it also shows your ignorance as to whom you think the audience is. Apple is not here. It's users, like you.
If you would have spent half the time actually reading the Terms of Use of this forum that YOU agreed to by signing up to post, as you did composing that usesless, inappropriate post, you (and the rest of us on this forum) would have been much better off.

Laserjet 1320 Toolbox software will not install on Windows 7

I bought this 1320 for my xp and the toolbox worked fine. Bought a Windows 7 and the same software fails to install. Running setup and it says there is some kind of java error. i have java installed, use it all the time and it works fine. I try to install the software using other 'exe' or 'setup' files and it tells me to use the windows drivers. The printer works fine, but I want the toolbox to tell me ink level.
update: I finally found the "ini" setup and windows 7 is not supported. So, is there anyway to get new s/w for W7?

If you have a 1320n, then the easiest way to check your ink level would be the Embedded web server (EWS). Put your IP address into your browser and this will take you to the EWS. From there you will be able to check the ink levels of your printer.
Otherwise, toolbox is not available for the windows 7 OS.
I am an HP employee.
Say Thanks by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as Accepted Solution

Printer software will not install

I have recently upgraded to Mountain Lion and use a Canon iP4950 printer. Some of the options had disappeared, such as the quality and media, although it would print. In trying to find where, or how to get to the options, I have obviously done something as the printer has 'vanished' and will not recognise the software so I downloaded the update for the printer from the Apple website and now get a message saying that the installation was successful - but still it won't recognise the software and I am getting a message saying "can't install the software for the Canon iP4900 series because it is not currently available from the Software Update server:.
Can anybody help please?

Problem solved by restarting the machine! Hope this helps

When trying to install downloaded software I am prompted to connect to the internet but I already am connected and the software will not install.

When trying to install downloaded software I am prompted to connect to the internet but I am already connected. This also occurs when trying to install an Adobe update.

A cable modem always needs a complete reset whenever you change the device that it is connected to.
To get your Internet signal restored, it will require at least one major step including the reset of your modem and complete network power cycle.
If that is not successful, the second major step is to reset the AirPort Extrreme back to factory defaults and then combine the steps above again.
Try this first:
Push the reset button on the cable modem (if present) and pull the internal batter (if easily accessible) then power off the modem
Power off everything else on your network....all devices....order is not important
Wait at least 20 minutes...longer will not hurt
Make sure that the Ethernet cable from the modem is connected to the WAN port (circle of dots or world icon) on the AirPort Extreme
Re-install the modem battery if it was pulled in the step above
Power up the modem and let it run for 4-5 minutes by itself
Power up the AirPort Extreme and let it run for 4-5 minutes
Power up each other network device one at a time about a minute apart until everything is powered back up
Check the network for proper operation

My HP printer software will not install. stated that it no longer supported PowerPC software

I have an HP 5610 All in one printer and while I can still print, I can no longer scan documents. The HP software cannot be re-installed due to a "Power PC" matter. It is no longer supported by Apple. Does this mean I have to buy a new printer.

the web site for that printer is:
http://support.hp.com/us-en/drivers/selfservice/closure/hp-officejet-5600-all-in -one-printer-series/441142/model/441143#…
Here's what it says (There's no download available - so No Download button shown):
This document applies to HP printers supported in Mac OS X v10.10 Yosemite, v10.9 Mavericks, v10.8 Mountain Lion, v10.7 Lion, and v10.6 Snow Leopard that only have drivers available through Apple Software Update.
Install the best available Mac printer driver and software from Apple Software Update.
NOTE:
Where is the download button? The HP printer driver is built into Apple’s Software Update feature on your Mac computer. Your printer is likely supported through Apple Software Update and you do not need to download anything from a website in order to print, scan, or fax.

Photosmart 3210 software will not install

Similar Messages

Maybe you are looking for