Photosmart C6180 on wireless network does not respond when attempting to print

Photosmart C6180 successfully installed on wireless network does not respond when attempting to print.  All in one is successfully installed on wireless network and SW successfully installed on Windows XP computer yet printer does not print.  Get no error message other than document failed to print.  HELP!

So gald I'm not the only one. I have been fighting this crappy HP printer for MONTHS also. Everything says a OK goody goody but printer fails to print every two to three weeks.

Similar Messages

  • I-Photo does not respond when attempt to print

    When I attempt to print from I-Photo my Mac Book Pro (OS X Yosemite) the app locks up (won't respond).  Printer HP Photosmart 7520, wireless.  Can print other docs.  Recently worked with HP on the printer because would not reconnect when when to sleep mode but that has  been fixed.  Any suggestions?

    The Application and the Library are two different things. SO, no, but you should always make a back up before doing this kind of thing:
    Most Simple Back Up:
    Drag the iPhoto Library from your Pictures Folder to another Disk. This will make a copy on that disk.
    Slightly more complex: Use an app that will do incremental back ups. This is a very good way to work. The first time you run the back up the app will make a complete copy of the Library. Thereafter it will update the back up with the changes you have made. That makes subsequent back ups much faster. Many of these apps also have scheduling capabilities: So set it up and it will do the back up automatically.
    Example of such apps: Chronosync - but there are many others. Search on MacUpdate or the App Store

  • Wrt610n wireless network does not work after firmeware upgrade

    Hi
    I just updated my Wrt610n hardware version 1 to the newest firmware, it did finish with sucess, I did factory reset reboot and reconfig. But the wireless network does not work , cant connect computers to it. Did downgrade the firmware to the same it was and restore my settings but still wireless does not work. But router works fine with lan.  Any suggestions? maybe the firmware tosted the router?
    Regards
    Stefan

    Update -
    After last reset and reupgrade with the newest firmware for hardware version 1 I could config the router and connect 2 computers with wireless - but only for about 15 mín - then they lost connection and could not reconnect.
    I did then get the newest update for hardeware version 2 - just to try and upgraded with that and got success, and now I have reset the router again and config it and those 2 computers are connected and have been for 1 hour now. So seems to be working - is it okay to have the firmware for hardware version 2 on my version 1 router?
    Any thought what is going on - could it be that the other firmware had not loaded compleytle or?

  • I am suddenly unable to open mail from the dock. dock shows mail is up and running, but stamp does not respond when clicked, and will not quit. help?

    I am suddenly unable to open mail from the dock. dock shows mail is up and running, but stamp icon does not respond when clicked, there is no mail window opened, and will not quit. when double clicked, get new mail is not an option and I get no response with other actions.
    I am retrieving mail on my phone with no problem. this just began happening, no updates or problems with anything else.
    help?

    command-option-esc keys and force quit Mail. Then relaunch.

  • I pad does not respond when trying to turn on

    I pad does not respond when trying to turn on

    Charge the battery.
    Try restoring your iPad > iTunes: Backing up, updating, and restoring your iPhone, iPad, or iPod touch software

  • Firefox does NOT respond when trying to clear history, cache etc

    Firefox does NOT respond when trying to clear history, cache etc
    windows says not responding and I can not clear anything

    Look this one
    http://kb.mozillazine.org/About:config_entries
    go to PRIVACY and read the following
    privacy. item. cache
    privacy. item. cookies
    privacy. item. downloads
    privacy. item. formdata
    privacy. item. history
    in about:config all the above put it to TRUE if there are FALSE
    thank you

  • Hey software does not respond when I open a new file or an existing file

    Hey software does not respond when I open a new file or an existing file

    Nobody can tell you anything without system info and other technical details.
    Mylenium

  • Hello I have a problem with facebook Messenger disappeared from my desktop iPod in the AppStore it says "open" does not respond when I press it. What should I do to download it? But I do not have it in AppStore it says that I have it: (

    Hello I have a problem with facebook Messenger disappeared from my desktop iPod in the AppStore it says "open" does not respond when I press it. What should I do to download it? But I do not have it in AppStore it says that I have it: (

    - Go to Settings>General>Usage>Storage>and under apps select FBM and try to delete it.
    Next:
    - Reset the iOS device. Nothing will be lost      
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings                            
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                               
    iOS: Back up and restore your iOS device with iCloud or iTunes
    - Restore to factory settings/new iOS device.                       

  • Lots of programs does not respond, when opened

    Lots of programs does not respond, when they are opened, Apple store, Mail, Photo Booth and VideoConverterPro and some moor.
    To close, I have to click on finder first. What to do ?

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
    Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
    The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Test while in safe mode. Same problem?
    After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

  • My screen seems to have frozen and does not respond when I touch. I tried to shut it off and when the red slider comes up, it does not let me slide it off.

    My ipad screen seems to have frozen. I tried to turn it off and the red slider does not respond when I slide it. What can I do?

    Hold down the sleep and home keys for about 20 seconds. If you see the silver apple it's rebooting. Let it do that and see if you're unfrozen.

  • Windows Server 2008R2 running Remote Desktop Services reports printer process does not exist when installing PDF printer

     Windows Server 2008R2 running Remote Desktop Services reports printer process does not exist when installing PDF printer, And when Installing network printers from the domain controller it reports it cannot connect to printer.  I can ping all
    network devices. I can connect to the internet.
    On boot I get a netlogon 5719 error followed by service control manager errors 7023,7001 and a group policy error 1129.
    Clients can connect to the remote application and RDP operates to connect to the server internally and externally.
    The domain controller is another server 2008r2 box. I have scoured the internet but have not found any solutions that work yet.

    Hi,
    After referring to your post, it can be identified that the issue which you are facing is mostly due to some network issue in your environment. Please recheck your network connection issue between computer and domain controller. 
    Can you able to ping with IP address and also with fully qualified name of a domain controller in the users' and computers' domain. If it fails states that name resolution issue with computer and domain controller. Are you using MS DHCP Relay agent then there’s
    available Hotfix for the particular Event ID. Please go through this KB 2459530 to fix the error event ID.
    As per the net logon error 5719 which you are facing states that the client component of Netlogon was unable to locate a DC for the domain it was trying to perform an operation against. Below is one of the reason. If this is being logged on a DC and the event
    refers to the DC's own domain, something might be preventing the client component of Netlogon from starting a network session (to itself or to another DC in the domain). The following event 7001 & 7023 states start & stop operation service. Please
    go through beneath article for more details.
    1.  Event ID 5719 is logged when you start a computer
    2.  Netlogon 5719 and the Disappearing Domain [Controller]
    3.  Event ID 1129 — Microsoft-Windows-GroupPolicy
    Hope it helps!
    Regards.

  • Virtual keyboard does not open when attempting to type in username or password fields

    virtual keyboard does not open when attempting to type in username or password fields. This occurs on multiple websites. HTC Incredible on Verizon network. Current updates on phone. Fennec update dated 9-20-2010. This used to work a couple weeks ago.

    Thanks for the report. We're working on fixing this; you can see the current status here: https://bugzilla.mozilla.org/show_bug.cgi?id=591047
    This bug should be fixed within the next week or so, and will be fixed in the upcoming beta release.

  • TS1702 I HAVE IPOD TOUCH MODEL A1421 AND IT WILL NOT RESTORE AND IS STUCK IN RESTORE MODE. DOES NOT RESTORE WHEN ATTEMPTING THROUGH ITUNES. PLEASE HELP!

    I HAVE IPOD TOUCH MODEL A1421 AND IT WILL NOT RESTORE AND IS STUCK IN RESTORE MODE. DOES NOT RESTORE WHEN ATTEMPTING THROUGH ITUNES. PLEASE HELP!

    If iTunes sees the iPod, try a manual install, as pointed out on link below.
    Troubleshooting 101
    Some topics covered
    -Basic troubleshooting steps
    -Hard reset instructions
    -Manual restore instructions
    -Hardware troubleshooting
    -Preventive Maintenance
    -Anti-theft & recovery tips
    -Battery-saving tips
    -Repair options
    -Contacting Apple
    17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
    Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101
     In Memory of Steve Jobs 

  • HT201406 1st. Gen iPad question:  the touch keyboard does not appear when attempting to input data into data fields - this happens while using all apps, ex. Notes, Google, Pages, etc..

    1st. Gen iPad question:  the touch keyboard does not appear when attempting to input data into data fields - this happens while using all apps, ex. Notes, Google, Pages, etc.. The cursor prompt is present.  Tapping screen just brings up the option to: "Select   Select All   Paste."   I have rebbooted with no change. 
    Message was edited by: Jimfromutah
    The problem was my connected bluetooth keyboard.

    1st. Gen iPad question:  the touch keyboard does not appear when attempting to input data into data fields - this happens while using all apps, ex. Notes, Google, Pages, etc.. The cursor prompt is present.  Tapping screen just brings up the option to: "Select   Select All   Paste."   I have rebbooted with no change. 
    Message was edited by: Jimfromutah
    The problem was my connected bluetooth keyboard.

  • ITunes does not respond when I try to play a movie

    I just installed the latest iTunes update onto my Windows 64-bit computer and now, whenever I try to watch a movie on iTunes it freezes and does not respond. I have to start the task manager and end the program manually. I have unistalled iTunes and reinstalled it but I still face the problem of iTunes freezing and not responding. I have a pretty good collection of movies and would love to watch them cause well I paid for them but i cant because it keeps FREEZING. Also, it wont let me view trailers on the iTunes store so I'm thinking something is wrong with the 'video' part of my iTunes. Please help.

    Although it's not such a good bet with a freeze as with the "iTunes has stopped working" messages, it would do no harm to try the following user tip:
    iTunes for Windows 10.7.0.21: "iTunes has stopped working" error messages when playing videos, video podcasts, movies and TV shows

Maybe you are looking for

  • .htaccess doesn't work on Snow Leopard

    Hi, I was googling a lot and found a lot of solutions but nothing seems to work. I've already changed AllowOverride to All in Apache2/users/username.conf file but .htaccess doesn't work. This is a sample of my .htaccess file: +RewriteEngine on+ +Rewr

  • PDFs in Snow Leopard Safari are not able to be exported or saved

    I have started having trouble with PDFs in Safari this week. I can see them on screen, but if I try to save them by Save As command, I get a message saying it cannot be exported as a xxx.pdf. If I try doing it through the Print command, saving it as

  • Metastat problem in Production server

    Dear frinds, This is the result of metastat in Production server and system has rebooted. d50: Mirror Submirror 0: d52 State: Okay Submirror 1: d51 State: Okay Pass: 1 Read option: roundrobin (default) Write option: parallel (default) Size: 41945472

  • Script to enable/disable audio/videotracks

    Hi, Trying this: function SwitchOffVideoOutput (vtracks,activeSeq)        var active_seq = activeSeq;        var videotracks = active_seq.videoTracks;        alert("numTracks: "+ videotracks.numTracks);        track = vtracks.split("|");        for (

  • What does it mean on ur iPhone say not enough local space

    I am having problem down load apps. My iPhone lets me I don't have enough local space. What does the mean