Photosmart D110 Scanner won't work with Mavericks

Since upgrading to Mavericks on my MacBook Pro, I can't save a scanned document, and I can't email one. I get an error message about the format of the document (and it's a document I've previously scanned and sent in a previous OS). Now, after trying to cancel the scan and the save, I'm hung up on "canceling." Can't get anywhere. Can anyone help? Thanks.

After being on the phone for 90 minutes with HP support, we came up with the following solution.
Download OXS 8 driver and software for the D110. Then download this from apple, a fix.
http://support.apple.com/kb/dl907
good luck!

Similar Messages

My epson Perfection V330 scanner won't work with mavericks

I updated to Mavericks and now my Esson scanner won't work. I found a download for a driver on the Epson site but it doesn't seem to want to download - either that or it's taking hours to download.

Hi,
As listed on Epson's site the drivers are available via Apple Software Update.
Ensure the scanner is powered on and directly connected to your Mac, then try following the steps below:
http://www.epson.com/cgi-bin/Store/support/supDetail.jsp?oid=14551&BV_UseBVCooki e=yes&infoType=Downloads&platform=OSF_M_X7
Now try opening the Image Capture application within the Applications folder and check if your scanner appears.
If the scanner cannot be located yet try restarting your Ma and check for any difference.
If the same still persists try resetting the printing system, then try adding the scanner again as listed on Epson's site.
You may reset the printing system as following:
http://support.apple.com/kb/PH11143
Finally, if you still having issue getting the drivers from ASU try installing the package below and try scanning from Image Capture again:
http://support.apple.com/kb/DL899
Shlomi

My HP Photosmart C5280 scanner won't work right anymore. I always used it with my Picasa 3

For some reason my HP Photosmart C5280 scanner won't work with my Picasa 3, and it used to. My PC is also an HP Pavilion g6, with Windows 7. I tried downloading a new driver, as the CD was too old to have Windows 7, and also updating my Picasa, but none of that worked. I'm trying to scan an old photo. I'm just not having any luck at all, and it used to work like magic.
Thanks.
Maerzie

Just when I thought oneof the cures was going to work, I got the message: "The system can't find the "file" specified!", so I opened the "file" with the new drivers, which I THOUGHT it meant, and , of course, it was WRONG! What file?? PLEASE help!

HT6114 HP Office Jet Pro 8500 Scanner no longer works with Mavericks upgrade

I have an all-in-one printer/copier/fax/scanner, HP Office Jet Pro 8500. The scanner no longer works with the Mavericks upgrade. Is it possible to get the scanner back in use? The printer and fax is fine, but I really use the scanner a lot. Please helap me.

The following link to the HP Support site indicates that scanning is still supported for the OfficeJet Pro 8500 using Mavericks but also indicates that "you may need to scan in a different way than you did before you installed Mavericks." See the FAQ section of http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03967522&cc=us&dlc=en&lc=en &os=4159&product=3752456&sw_lang=#N1237

Flash won't work with Maverick

I have tried installing flash several times, downloading updates, managers and still can not get flash to work with Maverick. Is there an update I'm missing or does it just not work with Maverick?

Works just fine. In Safari, Firefox, Opera, iCab, OmniWeb, SeaMonkey, and Chrome.
I assume you're suing Safari:
If Plug-ins are allowed, then I recommend doing a "clean install" using the latest FULL installer: Flash Player 120.0.047 (Mac OS X) and the illustrated instructions here: http://forums.adobe.com/thread/1343084

What apps won't work with maverick?

i am about to update to Maverick, aere there any apps that won't function with Maverick?

It is far from a complete list but http://roaringapps.com/apps:table is a good starting point. It should not be considered 100% accurate.
Uninstall any and all "anti-virus" or "cleaning" apps that should not be installed on any Mac, and back up your system as a precaution against the unexpected. Merely having a backup seems to preclude the need to ever require one.

HP Photosmart D110 scanner doesn't work

Hello,
I recently noticed that my HP Photosmart D110 printer/scanner won't scan.
I've reinstalled the printer on my HP computer and replaced the driver software from the original installation disk.
Still, no scanning.
An error message keeps coming up about the "device" not being fully installed.
The Photosmart printer/scanner is accessed through my network modem.
All the computers in the house can print but no scanning is possible at this time.
Any solutions or suggestions would be appreciated.
Thanks,
hpod1

Hey there and welcome to the community, @hpod1
I read about the issue you're having with scanning with your Photosmart D110 model and all of your computers.
Seeing that you cannot scan with any of your computers is concerning and would present the idea of a hardware problem within the printer.
I would suggest trying to make a copy or two and let me know what happens.
If copies do not work, try power resetting the printer:
Press the Power button to turn on the product.
With the product turned on, disconnect the power cord from the rear of the product.
Unplug the power cord from the wall outlet.
Wait at least 15 seconds.
Plug the power cord back into the wall outlet.
Reconnect the power cord to the rear of the product.
If the product does not turn on by itself, press the Power button to turn it on.
Best wishes, hope to hear from you
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Printer won't work with Mavericks

Since downloading Mavericks, my HP printer won't work--at the office AND at home. Please help.
I've done everything I think was suggested from removing HP software, reseting printing, factory default of printer--everything!
Please help!

I guess from reading your message that Mavericks just hasn't got the drivers from HP to support this. You don't specify what model printer you are using but I would suggest that this issue here is that either your PH printer is an old model or that you need to go looking towards the HP website and see what their responses are to providing the appropriate drivers. You're not alone sadly and this is the problem when you move forward with the times and the ancilliary equipment you have come to rely on is no longer up to speed. Good luck!

Canon LIDE210 scanner won't work with 64 bit arch.

I have a Canon LIDE 210 flatbed scanner which is supposed to be fully supported in linux - for many many months if I plug it in, and start up GIMP to use the scanner plugin - initially it looks like it will work but although it successfully completes a preview scan, if I ask it to do a full scan of a page or section of page it makes abnormal noises, and ends up usually screaming as if in pain, and then the sane application hangs. This is if it is plugged in to a laptop with usb3 cable connecting the laptop to the scanner, and running 64 bit arch. Yet the same scanner plugged in to a laptop which only has usb2 ports, and running 32 bit arch works flawlessly running the scanner in the same way.
I expect that the 32/64 bit arch issue is not relevant, and it is some problem with the usb3 drivers not being compatible with the usb2 capability of the scanner that is causing the failure.
I have seen some suggestion (from a Ubuntu forum) to "In the UEFI/BIOS change the setting under USB configuration, "XHCI Pre-Boot mode" from enabled to disabled. In some BIOS configurations this setting is known as "XHCI Mode". Is there a better way to resolve this since usb3 external drives and usbkeys work fine without this change on the same machine.
Does anyone have any experience with running usb flatbed scanners via a usb3 port, and if so is there a workaround that is known to work with this particular scanner? I have seen the thread at https://bbs.archlinux.org/viewtopic.php?id=184816 which also did not lead to a solution.
It would be nice to find a way to deal with this although perhaps a newer linux compatible scanner that is equivalent to the LIDE 210 is available that is compatible with usb3?

Hi Steve,
The Canon Australia web site is only showing v4.5.1.2 of CanoScan Toolbox for the LiDE35 (same version for Windows and Mac). There is no mention of v5.0.1.3 being supported by this model so this could explain the application is unable to locate it. The applications typically have a built-in list of support devices and if the 35 is not in this list then it won't work. Again with reference to the Canon web site, the LiDE 600F and 70 show v5.0.1.4 of CanoScan Toolbox. Later models, such as the LiDE 100 and 200 released last year, don't use the Toolbox application. Instead they work with MP Navigator or OS X apps like Preview.
Pahu

Canon LiDE35 scanner won't work with latest CanoScan software

I upgraded my MacBook Core Duo (2006) to Snow Leopard this weekend. All fine except even after loading the latest Canon Driver (lide35osx7721en.dmg) and restarting, then using CanoScan Toolbox 5.0.1.3 -- I get the message "Can't find Driver".
If I go back to 4.5.1.2 version of CanoScan - it works OK! But the 5.0.1.3 software is easier to set, gives lots of choices - it should work, right? Has anyone tried this or can anyone comment. (I never got 5.0.1.2 nor 5.0.1.3 to work with Leopard either - but hadn't updated the DRIVER - now I have but it still can't "Find" the driver!)
Thanks for any comments here - at least I can scan - and sure, maybe I could update this 5 year old scanner - but it works great!
Best regards,
Steve Schulte
Tuesday 27 April 2010

Hi Steve,
The Canon Australia web site is only showing v4.5.1.2 of CanoScan Toolbox for the LiDE35 (same version for Windows and Mac). There is no mention of v5.0.1.3 being supported by this model so this could explain the application is unable to locate it. The applications typically have a built-in list of support devices and if the 35 is not in this list then it won't work. Again with reference to the Canon web site, the LiDE 600F and 70 show v5.0.1.4 of CanoScan Toolbox. Later models, such as the LiDE 100 and 200 released last year, don't use the Toolbox application. Instead they work with MP Navigator or OS X apps like Preview.
Pahu

My HP Photosmart 385 printer won't work with my operating system - Windows Vista Ultimate. Why not?

Is there a driver that I can dowload so my HP Photosmart 385 printer will work with my Windows Vista Ultimate operating system?

Hey Alyssa426,
Welcome to the HP Forums!
Since the installation disk does not support Windows 8.1, I would suggest trying to download, and install the drivers directly from the HP Support website. I have included a link to the 'HP Deskjet F4200/F4224 All-in-One Printer series Full Feature Software and Driver'. Once the software is downloaded, open the software, and follow through the on screen instructions for installation.
Please let me know the outcome of installing the software.
Thank you.
I worked on behalf of HP

I recently install Lion OS on my iMac and just found out that my Canon 4400F scanner won't work with Lion, what can I do to get it working again?

I am having trouble with some of my previously installed software before installing the New Lion OS. I just found this evening that my Canon 4400F Scanner will no longer work with the new OS. I need to know if there is a solution for this short of buying a new scanner? I am also upset that my Microsoft Office Professional will no longer boot as well. Anyone know why this took place?

If it will not longer work due to Lion, it's most likely becasuse no drivers for Lion have been released. No way to get aroud it other than going back to Snow Leopard. MS Office wont work if it is '04 or earlier becasue it is a PPC application. Mac switched from PPC to Intel in 2006 and created the Rosetta emulator to allow companies to make their software compatable or allow users to buy new software. After 5 years, Rosetta support was dropped, with the release of Lion. No way to get this software to work with Lion.

Epson Perfection 1650 Scanner won't work with 10.7.5, help?

I am trying to use my EPSON PERFECTION 1650 scanner with my MacBook Pro, software version 10.7.5. The old driver does not work with Lion. I ran software update, with the scanner connected, and it did not come up with any new Epson software to install. Can anyone help me locate this driver? When I googled Epson driver for this operating system, it says I have to run software update on the Apple and it will automatically come up. But I have had no luck. Someone help please? Thanks, Chris

Hi,
As listed on Epson's site the drivers are available via Apple Software Update.
Ensure the scanner is powered on and directly connected to your Mac, then try following the steps below:
http://www.epson.com/cgi-bin/Store/support/supDetail.jsp?oid=14551&BV_UseBVCooki e=yes&infoType=Downloads&platform=OSF_M_X7
Now try opening the Image Capture application within the Applications folder and check if your scanner appears.
If the scanner cannot be located yet try restarting your Ma and check for any difference.
If the same still persists try resetting the printing system, then try adding the scanner again as listed on Epson's site.
You may reset the printing system as following:
http://support.apple.com/kb/PH11143
Finally, if you still having issue getting the drivers from ASU try installing the package below and try scanning from Image Capture again:
http://support.apple.com/kb/DL899
Shlomi

New scanner won't work with G5, Intel Core Duo

I bought a Brother MFC 420cn all-in-one. The printer/copier works great, but I can't get the scanner to work with the Mac. The scanner driver comes with a bundled software "Presto Page Manager 4.0," made by New Soft, Inc. New Soft blames Apple for their new Intel products. They told me to contact Brother. Brother doesn't have an update that works with the new Intel Mac. Apple doesn't have a solution. I've spent hours being kicked around, and nobody has a solution. How can I get this scanner to work with my Mac? Anybody else out there have this problem concerning compatibility problems with the new Intel Macs and periferal hardware/software out there?

Hi Hefdog,
Considering what I presume are fairly radical differences in the architecture of the new Intel Macs, it is amazing how well most things work. And since the Intel machines are obviously here to stay, I guess it’s only a matter of time before all vendors provide compatible drivers etc.
Have you tried to run your new scanner from Photoshop? I found the ‘Acquire’ function worked, even before installing other drivers. And you’re not missing much in Presto Page Manager, unless it’s been improved considerably since an earlier version!

Scanner won't work with one user but will work with another

Tonight I used my scanner and it worked fine. Then a few minutes later I tried to scan another documentand it wouldn't work. I finally logged off, and switched users (to Administrator) and I was able to use thescanner. I don't know why it works for one user but not the other. (This is very inconvenient.) What do I need to do to fix it?

Hi Rustyintegrale,
A couple of questions...
1. Does the unit immediately kernel panic when power from the bus hits the drive?
2. Does it happen in multiple users?
3. If you startup, interrupt the boot process and boot to the startup manager (by holding option on startup) and then plugin the SuperDrive does it kernel panic there as well?
When a peripheral causes a unit to go into this state, there's little that can be done to troubleshoot from a software perspective. Especially if your answer to all three questions above was "yes." You can certainly try resetting the PRAM & SMC, to see if there is any change. But, I think the next best step might be to bring the machine and this optical drive to see a qualified technician.

Photosmart D110 Scanner won't work with Mavericks

Similar Messages

Maybe you are looking for