Photosmart printer -all-in-one 5520 and windows 8.1 - INSTALLATION ERROR

I have a photosmart printer - model: all-in-one 5520; code number HPC57CC4  and my operating system is windows 8.1.
I had problems with the scan function and so I decided to disinstal the printer (from the Control Panel) and I even cancelled  the HP folders.
Then I tried to reinstal the printer with the original CD but I got the message: INSTALLATION ERROR - DRIVER PACKAGE INSTALL GIVES THE ERROR -536870329 FOR THE PACKAGE  C:\Program Files\HP\HP Photosmart 5520 series\DriverStore\Pipeline\hpvpl09.inf   (that's the translation from Italian)
I have tried endless times to install with the online software from the HP assistance (hppsdr.exe, hppiw.exe, ps5520_1315-1.exe, hpscan and doctor) but I always get the above error message, the system recognizes my printer, but gives the error message few seconds after starting installing it.
If i use the printer from other PCs it's ok, I've also tried both in the wireless modality and with the USB cable but the result is the same: no installation!
thanks in advance fot your help.
denise

Hi @denig,
Welcome to the HP Forums!
I noticed that you are having trouble installing your HP Photosmart 5520 on Windows 8.1. I am happy to help you with this installation issue!
Please try the following solutions:
Uninstall the software. Uninstalling the Printer Software. (In case any was partially installed).  
Clean boot the computer. How to perform a clean boot in Windows.
Make sure no antivirus programs are running. Turn Windows Defender on or off.
Make sure the firewall is disabled. Disabling the computer's firewall on a Windows 8 or Windows 8.1 computer.
Re-install using the HP Printer Install Wizard for Windows.
Hope this helps you resolve your issue, and have a good day!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

Similar Messages

  • HP Photosmart c7280 All-in-One compatible w/Windows 10

    Does anyone know yet if the HP Photosmart c7280 All-in-One printer is compatible with Windows 10?  I could not find it on the HP driver update list.Thank you.

     Your printer is in the list of those supported for Windows 10. See the following: Install Full Feature Software – Printer  Section titled The Windows 10 Printer Frenzy If the setup really kicks back (has issues) -- you might temporarily switch off Fast Start and try again:Fast Startup - Turn On or Off in Windows 10  Your printer's Website Support Page:HP Photosmart C7280 All-in-One Printer  When you see a Post that helps you,Inspires you, provides fresh insight,Or teaches you something new,Click the "Thumbs Up" on that Post. Click my Answer Accept as Solution to help others find Answers.

  • Consolidating scanned document with HP all in one 8620 and windows xp

    Using the HP Printer assistant I am unable to consolidate the multiple pages of particular documents into one file.  I do not know if printer asst allows this capability.  It sounded like I needed to download hp director from online info.  please help.

    Hi,
    Please try:
    After the first page, click add pages (a small + sign, on the left hand side of the preview window) to add the second page
    Repeat for 3rd, 4th .... pages
    At the end, Save document. All pages are now on one file, from the first page to the last page.
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Printer, All in One software and Drivers

    Upgraded my MacBook Air to 10.6 and cannot get my printer Photosmart Prem C310a product CN503B to install download updated driver software beyond the 'Add Printer'.  See on some websites that Apple will not recognise Bonjour.  Any suggestions?
    This question was solved.
    View Solution.

    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03967522&cc=us&dlc=en&lc=en&os=4159&product=423...
    plm1,
        Here is a link to a document that may help.
    I was an HP employee
    If I have helped you solve your issue please mark it as solved
    **Say Thanks By Clicking on the Kudos Star**

  • HP Photosmart e-All-in-One - B110a : How can I deactivate wireless?

    Hi, everyone.
    I just bought HP Photosmart e-All-in-One - B110 and after the installation (which went OK), while trying to get acquainted with the printer and the rest of the functions, I pushed the Wireless button out of curiosity.
    Now, every time I switch on B110, the Wireless blue light keeps blinking. Does that mean that it's working?
    I do NOT want to activate wireless printing (at least for the time being). I want it deactivated permanently. Is there a way to do this?
    Many thanks in advance.
    This question was solved.
    View Solution.

    The blinking blue light means it's looking for a network to connect to. It won't connect to a network if you haven't put any info in the wireless setup. I believe there's an option to turn off the wireless radio in the settings somewhere.

  • Detection problem of my HP photosmart C5200 All-in-One series

    Hi,
    I have an HP photosmart C5200 All-in-One series and the printer will not detect that it is connected to the computer via USB cable. I checked all the USB slots in my computer and they are work, so the problem is with the printer. I tried installing and re-installing the printer to several computers and the installation goes well until the step that asks to connect the USB cable to the printer and computer for identification. However, printer seem not to recognize that it is connected. So, it gives me the option to proceed without the connection step and the installation is complete.
    If anyone had the same problem and solved, it would be greatly appreciated to have your help.
    Thank you.

    What operating system are you using ?
    You may try the HP Install Wizard to detect and resolve your issue.
    If I helped you at all it would be great if you clicked the blue kudos star!
    If I solved your post please mark it as solved to help others.
    I'm a printer tech with HP.

  • New printer all in one

    Hi everyone,
    i need to buy a new printer all in one (fax and scanner) with WiFi.
    I want that it's compatible with AirPrint (i have a iMac with 10.8.3). Price up to €100.
    Any advice?
    Thank you.

    There is a great list of compatible printers at > AirPrint basics
    Everyone has there favorites brand(s), mine are Epson and Canon in that order.

  • Is HP Photosmart Premium all-in-one C309n-s printer compatible with Windows 8.1 PRO?

    Is HP Photosmart Premium all-in-one C309n-s printer compatible with Windows 8.1 PRO?
    Operating System:  Windows Version 8.1 PRO
    When I upgraded from Windows 7 to Windows 8.1, my HP Photosmart Premium all-in-one C309n-s
    stop working.  Is this printer not compatible with Windows 8.1 PRO?  Is there any update for this?

    Hey,
    HP Photosmart Premium all-in-one C309n/g printer is compatible for Windows 8.1
    Please uninstall your printer's old software then install new one for windows 8.1.
    HP Photosmart Premium All-in-One C309 Series Full Feature Software and Driver :
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-109711-1&cc=us&dlc=en&lc=en...
    Kevin_US_CA
    Make it easier for other people to find solutions, by marking my answer “Accept as Solution” if it solves your problem.
    ***Click on "Thumbs up" button to the left side of my post to say thanks!***

  • HP Photosmart 2610 All in One Printer Paper feeds OK but the software and sensors are a problem

    HP Photosmart 2610 All in One Printer   Paper feeds OK but the software and sensors are not allowing paper to feed until several steps are taken first.
    (I am using Windows 7.  I also use the virtual XP mode and mostly MS Office 2003 docs). 
    I have had this printer for several years and love it.  Before I toss it out, I thought I would check if I could get it to work properly before I buy another printer.  Note: I did put in a new HP black cartridge (because it was out of ink) but the printer was not working properly for several days before I changed the cartridge. The printer was at step 5 before ink change.
    Lately, each time I turn on my printer, I have to go through the same routine
    1. The printer wants to align the cartridges so I push OK
    2. The paper feeds into the printer and stops at the exact place to start printing.
    3. Error message appears that it is out of paper.  So I press OK to continue.
    4. It says "aligning print cartridges" runs through 2 sheets of blank paper without trying to do anything and then states "cartridge alignment failed"  "Press OK to continue"
    5. Screen is now normal and it appears it is going to work.
    6. It makes no difference if I used the copy function OR when I send a print job from the computer, the paper feeds into the printer and stops at the exact place to start printing but nothing happens.
    7. Error message appears that it is out of paper. OR that it is the wrong size paper.  I pull the paper that was at the proper place to be printed from the printer and then the error message says "Paper jam.  Press OK to continue"
    8.  I press OK.  The printer will then quickly feed in and eject 2 sheets of paper before it will actually start printing the print job.  It will work fine after this as long as I print from the same document.
    9. If I want to print a different document then I have to start all over again at step 6 to get the printer to work.  If I shut the printer off I have to go back to step 1.
    What I have already tried
    A.  Uninstalled and reinstalled the printer driver direct from HP web site.  I have done this several times with both the basic driver download and the complete package download.
    B.  I have done a partial reset by unplugging the printer, and then re-plugging the printer while pushing the  "# and 3" buttons while turning on the printer.  I have done this several times.  Each time it will work fine until I try a different document of turn off the printer.
    C. I have downloaded the HP Print and Scan Doctor and used it several times.  It states that "everything checks out OK"
    D. I have downloaded the HP Hardware Diagnostic Utility 4.0 but it does not work with my printer.
    E.  I have cleaned all the rollers and blown air throughout to make sure there were no bits of junk in the paper's path or blocking a sensor.
    F.  I have tried different brands and weights of paper (all 8½  x 11) but nothing works.
    Most of the problems started when I added the printer to the virtual machine so I could print XP files.  This may just be a coincidence because the printer has the same problems when I use the copy function without the computer being on.
    Thanks for looking at my issues.  Any help would certainly be appreciated.

    I just tried using Notepad as you suggested and had the same result.  Paper feeds in stops at proper place and error message "out of paper" 
    I just put in two new HP ink cartridges because the other two were low and I was told that this might be the problem. 
    I seem to remember that the HP 2610 shows 2 "ink icons" in the lower left corner.  One for black and one for color.  The ink icons would change from completly full to just an outline as the amount of ink went down.  Currently the black ink icon is missing
    This is a very frustrating problem because the printer works great after doing a few steps to get around the problem.  The fact that the problem reoccurs any time anything is changed is the major problem
    Most of the problems started when I added the printer to the Windows 7 virtual machine so I could work with Windows XP programs.  This may just be a coincidence because the printer still has the same problems when I use the copy function without the computer even being on.
    I want to thank you for all of your efforts.  Perhaps this is a unique problem that will never be solved and it is best to take my losses and buy a new printer.  As a last chance, if possible, could you refer my post to someone who is an expert with the HP 2610 printer.

  • HP Photosmart C7280 All In One printer not campatible with windows 8.1

    I have an old Photosmart c7280 all in one printer.  I bought a new computer that has windows 8.1.  HP doesn't
    have software or drivers that can make this printer compatible with my new computer.  What can I do besides buy a new prfnter?

    Hi,
    Please download the following Software and Derivers and install on your new Windows 8.1 machine:
        http://ftp.hp.com/pub/softlib/software12/COL30662/mp-110038-1/PS_AIO_02_Net_Full_Win_WW_140_408.exe
      Regards,
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • NOT PRINTING FROM WINDOWS 7 TO MY PHOTOSMART c7180 ALL-IN-ONE (I CAN SEE MESSAGES IN QUEUE)?

    CANNOT PRINTING FROM WINDOWS 7 TO MY PHOTOSMART c7180 ALL-IN-ONE (I CAN SEE MESSAGES IN QUEUE)?

    Hi,
    I think you need to remove the queue. Please try:
        hold down the Windows key and press R.
        from the Run window, type services.msc and hit enter.
        if the machine asks for Admin you have to accept this,
        look down to the print spooler service, right click it and select properties
        click on the Stop button,
        browse to C:\Windows\System32\Spool\printers
        delete the job inside this folder
        reboot the machine
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • I have a hp photosmart c4795 all in one printer and i need the driver and software for vista os.

    install is for a gateway laptop NV5214U. I did asearch on hp website but it responded the it could not find any drivers for the hp photosmart C4795 series all-in one printer.HELP

    Ok from here: http://support.hp.com/us-en/product/HP-Photosmart-​C4700-All-in-One-Printer-series/3794613/model/3940​...
    First, select your operating system Microsoft Windows Vista (64-bit).
    Click Submit.
    Click the blue Download button.
    Click Next, then follow the prompts for the HP Download and Install Assistant.
    Let me know if you need any more help or if this solves your problem!
    Thanks,
    -hjs_19 *I work on behalf of HP
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution. Click the “Kudos Thumbs Up" on the bottom right of this post to say "Thanks" for helping!

  • I have a HP Photosmart C7280 All-in-One Printer and want to print from my ipad

    I have a HP Photosmart C7280 All-in-One Printer and want to print from my ipad's and my iphones at home...  My printer is set up to print wirlessly on my Network.  I need to know is there a firm wear update i can get or a good app to install so i can print?? 

    hi there, 
    This article should have everything you need to get started . Check it out and let us know if it helps.
    Best of Luck! 
    You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

  • I have an HP Photosmart C4180 all in one printer scanner and copier, I can't figure out how to scan more than one page at a time and then send as a PDF file via email

    I have an HP Photosmart C4180 all-in-one, printer, scanner and copier.  I can't figure out how to scan more than one page?  It will only let me do one page at a time and then I have difficulty sending pages 1, 2 and 3 as one docuement.  Any ideas??
    Thank you, Jetteski

    Hello Jetteski,
    Hello Jetteski, Thanks for the post.
    Since you are running a MAC, check the below links for some excellent information on scanning.  Good Luck!
    http://goo.gl/M8Cl2
    http://goo.gl/cufK6
    http://goo.gl/OTQoR
    I work for HP but my posts and replies are my own....Thank you!

  • HP Photosmart Premium All-in-one c310a - How to print in black and white

    I want to print a color pdf file in b&w on my HP Photosmart Premium All-in-one c310a printer. When I go to "features" -> color options -> grayscale -> in the drop down box, there is only one choice - "high quality". There's no "black ink only" choice as I have seen in forums on similar printers.

    If you have the full feature drivers installed for this printer and there isn't a Black Ink Only option under Print in Grayscale, then this printer lacks the feature.  Typically the Black Ink Only options follows the drivers for some deskjets and most officejets, because of the office environments they are intended for.  Where as Photosmart printers are more aimed at printing photos. 
    -------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------
    I am not an HP employee.

Maybe you are looking for

  • HT5129 how can I get rid of mobile me stuff all over my computer?

    have mobile me stuff all over my computer.  how do I get rid of all of it?  mobile me keeps popping up all over the place and the icons won't go away thanks janice

  • Oracle 11g advantages for performance

    Hello, I am doing test of Client side result set cache on oracle 11 g rel2 ,O/S- RHEL i am doing test as below on 2 Oracle 11g rel2 test servers on RHEL one oracle 11g rel2 instance is used as server1,from other oracle 11g rel2 server2, i am running

  • Why do certain apps were not showing up in creative cloud desktop manager

    I'm not so sure on why this error message shows up every time I logged in to my computer. Here's my scenario- Every time I try to open the Creative Cloud desktop manager and it will not launch as if it's not working. So I saved a copy of their instal

  • Problems upgrading from VS2008 to VS2010.

    Hi there, I've recently installed VS2010 and the Crystal Reports installer to go with it. I've also converted my existing VS2008 solution to work in VS2010. I got no errors during the conversion and my code compiles fine, but when I try and run a pag

  • Doc Number -- Latest Instance

    Hi I have been trying to write a query that via the means of a formatted search will look at the document no. and bring back the last instance of that document number. I have the query below which brings back the document no. but not sure how i can f