PhotoSmart3210 All in one "Paper detected does not match paper size or type selected."

All of a sudden i cannot copy any document with my 3210 All In One.  I keep getting the message shown above on the screen.

Hi @nunzio317 
I would like to help you with your Photosmart 3210. I understand that when you copy you see a message on the printer that says "Paper detected does not match paper size or type selected". Does this also happen when you print from the computer, or only when you copy? Have you tried copying a different size paper, and what size paper are you currently using?
Are you able to print a self test report? If you are unsure, please try, and let me know;
Load plain white paper into the tray.
Press the Setup button.
Press 1 to display the Print Report menu.
Press 1 again to select Self-Test Report. The self-test report prints.
- Source
If this also happens when you print from the computer, please use the following document as it can help you to resolve the issue; 'Paper Mismatch,' or 'Paper Size Mismatch' Error Message Displays When Printing.
I hope this helps.
  - In support of Movember
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

Similar Messages

  • Paper detected does not match paper size or type selected

    Says paper mismatch! Paper detected does not match paper size or type selected. I have a 6600. Can some help?

    Hi,
    Try updating the printer firmware, the latest version should improve its paper handling.
    Follow these steps to get the latest update for the printer and then check for any differencex:
    http://support.hp.com/us-en/product/HP-Officejet-6​600-e-All-in-One-Printer---H711a/H711g/4322968/mod​...
    Shlomi
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

  • Hp pro 8600 error Paper detected does not match paper size or type selected .

    hp pro 8600 error "Paper detected does not match paper size or type selected" for Copies from tray one .  There has been no change in the paper always used in tray one.  Prints documents with no problem from Tray One with same paper.  Copies from Tray 2, same paper,  no problem.  Have restarted the printer, same error.   When I try to copy using Tray one, the to be copied document does not feed, and the printer kicks out a blank page using Tray One Paper.

    Hello marathonmama,
    Welcome to the HP Forums.
    I see that you are having an issue with a Paper Mismatch error on the printer.
    Please click the following link that deals with an HP Single-Function and Multifunction Printers - 'Paper Mismatch,' or 'Paper Size Mismatch' Error Mes....
    If the troubleshooting does not help resolve your issue, I would then suggest calling HP's Technical Support to see about further options for you. If you are calling within North America, the number is 1-800-474-6836 and for all other regions, click here: click here.
    Thanks for your time.
    Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    W a t e r b o y 71
    I work on behalf of HP

  • All-in-one 6830 printer Does not enter sleep mode when connected to a phone line

    HP staff  help. HP all-in-one printer 6830 does not enter sleep mode when conntected to a phone line via 1-Line jack.  The Firmware is PNP1CN1521AR. On August 1, 2015,  I purchased an HP all-in-one 6830  printer and upgraded to firmware PNP1CN1521AR.When a phone line is connected to 1-Line jack of 6830, the printer will no longer enter  sleep mode and the display remains on indefinitly.Removing the phone connection either from the wall outlet or from the printer causes the sleep mode to work correctly again where the control panel display turns off after 5 minutes (or optionally  after 10 or 15 minutes).This problem was previously reported by a user and has not been resolved, see:http://h30434.www3.hp.com/t5/Other-Printing-Questions/Sleep-mode-of-Officejet-Pro-6830/td-p/4772182 The user did not receive a resolution to this problem according to the thread.
    There seems to be a  6830 printer firmware or hardware problem causing this. HP  should be able to confirm this problem on 6830 easily.
    Please advise ASAP.
    Thanks 

    It's a regular analog phone line. I've tested it with other phone lines. No difference. I have another all-in-one printer which works fine (goes to sleep mode) when plugged into the same phone line.
    The 6830 works ok in other aspects. The only problem is the sleep mode. Any 6830 with the firmware I mentioned should replicate the same result, regardless of anything else. The previous firmware to PNP1CN1521AR also created this problem according to the original report of this problem by another user.
    I'm sure there's a bug in the firmware. A subroutine in the firmware monitoring the incoming fax ringing, mistakenly, sees the voltage across the phone jack pins as an event and wakes up the printer instantly even though there's no ringing. As the previous user also suspected, there seems to be an error in the phone line voltage threshold used by the firmware. The present firmware always sees a ringing at the phone line which causes it to never stay in sleep mode.

  • Error the entered value does not match the specified field type

    Hi,
    When I try to insert a null value to a field of the User Defined Table I am getting the error "The entered value does not match the specified field type" in SAP Business One version 2007 PL 42.
    Any help would be appreciated.
    Thanks in advance.
    Sudha.

    Hi Sudha,
    It probably have to do with how you defined the field.
    Is Null value allowed?
    What are the field definitions?
    Thanks,
    Jesper

  • OB048 - ED Status from valuation type does not match ED Status handling type TE

    Hi,
    Good day!
    We have experienced an error message (# OB048) indicating that ED Status from valuation type does not match ED Status handling type TE.  I have already checked configuration under Tariffs, Duties, and Permits of the Industry Solution Oil & Gas (Downstream) and the following were in order:
    1. Excise Duty Group
    2. Excise Duty Status
    3. Set Handling Type
    4. Set Pricing Indicator
    5. Maintain excise duty/tax status/account determination
    6. Maintain handling type/tax status
    May I know what can be the solution to this error message considering that the above configurations were already accomplished.
    Thanks in advance.
    Regards,
    Vensim
    Note: Attached is the file with screenshots of the error message. FYR.

    EdStevens wrote:
    856483 wrote:
    <snip>
    can i have you mobile contact phone number if possible?
    I have seen some pretty astonishing requests on this board, but this one really raises (or lowers) the bar. Just what is it your boss is paying you to do?
    Some listserves have lots of people giving their number. I find it odd that people would, but not astonishing for someone to ask. Outside the norm here, but how would someone know ahead of time? It's a bravely connected new world.

  • CS4 Upgrade, the serial number you have entered does not match the product you have selected

    I have a valid CS2 premium license and have installed CS4 upgrade to a new machine but get the dreaded error "the serial number you have entered does not match the product you have selected" Now I got this error when I originally installed in 2009, back then I could call customer service and get the problem resolved but now when I phone I get an automated message saying phone support is not available for CS4? Does anyone know of a work around or a UK number where I can get this resolved? Any help would be appreciated.

    Please see: http://www.hp.com/country/us/en/mda/windows7/upgrade/index_ww.html to select your correct country or region.
    Carey Frisch
    Microsoft MVP
    Windows Expert - Consumer

  • HP Officejet Pro 8610 All-in-One Printing Preference does not have Print Last Page First option

    HP Officejet Pro 8610 All-in-One printer:  Printing Preference missing Print Last Page First option.  Print lots of multipage documents.  Spending enormous amount of time resorting pages. 
    Prior to this printer?  .... grab printed stack -  staple  -  DONE! 
    Now?   Have to resort every document!
    Anyone out there have a solution?

    Reply to mkjohnson42. It doesn't matter what application I'm in. The option is NOT there. Just to confirm, I started from Word 2010, Excel 2010, a web page using Internet Explorer, Foxfire and Chrome. Plus, I did the old stand-by of going to Printers and Devices>Preferences. Under Preferences I have the choice to print on both sides of paper but NO Print Last Page First. I REALLY did check ALL of this before resorting to the Community. So, I really don't understand your question. Sorry.

  • Trying to connect HP officejet all-in-one! assitant does not support router??

    I am trying to connect HPOfficejet 7410 All-in-One which is wirless enabled to my wireless netowork. Getting message," HP NETWORK ASSISTANT does not currently support the router that is connected to your system."  Does this mean that I cannot setup this printer with the router I have?  Or is there another way I can connect it without using the Network assistant?  The router I have is a Linksys Router Model # WRT110 . I have tried to find another router that was in the list of "supported routers" with no luck.  I have looked everywhere.  Please if someone could help! Let me know if you need more info to answer my question. Thanks!

    Actually, its not that the youre router is not ocompatible with the HP Network Assistant. Maybe yuore router has a very secure network security thats why the wireless assistant could not connect the printer to youre router
    - The other way to connect the printer to your wireless network is to run the wireless setup wizard on the printer.
    - Step 1. Press the set up button on the printer and press the right arrow then navigate & look for netwok menu then press ok.
    - Step 2. press the right arrow and look for wireless setup wizard
    - it will look for youre wireless router and try to select your router the enter the security key(WEP or WPA) if you have one.
    - after that it will prompt you that the printer is connected to your network
    REGARDs --- 1234 --

  • Photosmart 2610 all-in-one Scan preview does not display

    Recovering from a hard-disk crash, I've just reinstalled my Photosmart 2610 all-in-one using the driver and software package for Windows XP : rub_W01_Americas_Euro1_NB.exe. downloaded from the HP support site. All seems to be running well, except for a glitch when I try to scan: the document Preview does not display.  I have made certain that the Preview checkbox is duly selected, but nothing seems to help. It is the same whether I'm scanning a picture or a document. It also makes no difference whether I launch the scan from HP Director or from within another application.
    Note that if I click Accept, the document (or picture) will indeed be scanned and saved. But I won't see it until I open it with some other application.
    Thoughts, anybody?
    Thanks!
    James

    Hello James, welcome to the forums
    I understand you are unable to see your scanned preview with your Photosmart 2610. I would suggest the guide below to use for troubleshooting steps for this issue.
    Scanning Stops at the Preview Screen when the Printer is Connected to the Computer with a USB Cable ...
    If the troubleshooting does not help resolve your issue, I would then suggest calling HP's Technical Support to see about further options for you. If you are calling within North America, the number is 1-800-474-6836 and for all other regions: click here.
    Have a great day
    R a i n b o w 7000I work on behalf of HP
    Click the “Kudos Thumbs Up" at the bottom of this post to say
    “Thanks” for helping!
    Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

  • HP Photosmart Plus e-All-in-One Printer B210e Does Not Print Through Wireless

    I am using Mac OS X 10.7.3 on a wireless connection. I went to print, HP Utility gave me the following error message:
    The printer may not exist or is unavailable at this time
    It was not being used by anything else at the time. Then 2-3 minutes after I got that first error message HP Utility gave me another error message:
    The printer is not responding
    Then on the printer touch screen display I touched the wireless icon, chose Run Wireless Network Test, and got an error message:
    Load paper into Main Tray.
    The tray had plain white paper (10-15 sheets) in a nice neat stack as far back as it would go. I took the stack just to be sure it was still in a neat stack and put it in as far as it would go and pressed OK on the touch screen display and I still got the same message. Then I decide to turn the printer off using the power button, waited about a minute, and then pressed the power button to turn it on. When I did I got another error message:
    Improper Shutdown
    To avoid damage, use On button to shut down. Do not unplug the power cord or turn off the power outlet to shut down the device.
    How is that an improper shutdown when I did use the power button to turn it off.  Why is it telling me that I need to use the power button to turn it off then back on when I did use the power button to do that.  What is the issue and how do I fix it.  I did not have this issue with Mac OS X 10.7.2, but I do now agter the 10.7.3 update.  As of right now the only way I can print from Mac OS X is using a USB connection.  I can print through a wireless connection using my Windows 7 partition on the same MacBook.  I am starting to think that this printer is not Mac OS X 10.7 Lion compatible.
    I have a Time Capsule (3rd Generation) with the current firmware for it and the current the current AirPort Utility for Mac OS X installed.

    SthrnDixieCowgirl wrote:
    I don't know how to remove and add printers unless I had to format my hard drive for a completely different reason and reinstalled the printer that way.
    To remove the printer, open System Preferences > Print & Scan. You will see the HP in the Printers list. Click on it once to select it and then press the minus button under the Printers list to remove it.
    With this done, click the plus button under the Printers list to add the printer. With the Add Printer window open and the Default view selected, the HP should appear in this view. Select it and the Print Using menu should change to the supporting printer driver. When this happens, click the Add button to complete the creation of the printer queue.
    SthrnDixieCowgirl wrote:
    I have heard other people have issues with 10.7.3 for other reasons and I should have waited until 10.7.4 came out before updating and I didn't and now there is nothing I can do to go back to 10.7.2
    You cannot believe everything you read. For every person that had a problem after installing the .3 update, a hundred more had no problem.
    But if you wanted to go back to 10.7.2, then you can use Time Machine to do this. If you are not using Time Machine then you need to start doing so. At least the update only stopped you from network printing. What if it had stopped you from using the Mac?

  • PDF Page Size does not match Canvas Size

    Hello,
    I'm using Xcelsius 2008 Engage SP1 on Vista 64bit with Office 2007 installed. When I'm exporting a Xcelsius file to PDF, the resulting Page Size of the PDF file is 8.5in x 11in. However, the Canvas size in Xcelsius is 800x600 (pixels). The resulting PDF file has quite a bit of whitespace in the top and bottom sections of the file.
    Is there anyway that I can export to PDF but with a file size that is in the same aspect ratio than the Canvas Size?
    Thanks for any input.
    Regards,
    Jon

    We regularly export to PDF and face this issue.  I believe that the adjustments need to be made in Acrobat as there is, from my understanding, no way to change the default export in Xcelsius.  You are probably already be doing this, but if not ... our solution has been, once you have exported your model into Acrobat, to simply rotate the page before saving the file.  At 800 x 600 you may still have some white space at the top and bottom of your model.  We typically use an Xcelsius canvas size of 1100 x 850.  When exported (and rotated in Acrobat) this gives a nice crisp image that also fills the page.  I hope this helps you.

  • Brush cursor does not match the size of the brush I am using

    Recently the brush cursor changed so that it is much larger than the actual brush that is applied to a background or photo.  I can't tell where or how big the brush is going to apply.  I have reset the brush tool and checked the brush tool options.  All are set at zero except the brush spacing which is at 25%.  It always sits at 25% spacing.  I recently started using a magic mouse on my iMac instead of a regular pc mouse.  I am using the brush tool on Photoshop Elements 10 and Photoshop CS4.  Is this a mouse problem?

    Which version of mac os x are you using?
    See if going to System Preferences>Accessibility>Display and the setting the Cursor Size to Normal resolves the issue.
    or
    System Preferences>Universal Access>Mouse

  • HP Officejet Pro 8600 Plus e-All-in-One Printer - N911g can not define a custom size paper.

    HP Officejet Pro 8600 Plus e-All-in-One Printer - N911g can not define a custom size paper.  I would like to have a custom size to work with a card making program.

    Can you help me out?
    I have an HP Officejet Pro 8600 N911a
    When I try to print to a custom print size (2.75" x 6" in my case), I get the same error everyone else is reporting: "Paper detected does not match paper size or type selected. Make sure the paper size or type is correct to continue the job."
    I am currently trying to print using Microsoft Word for Mac 2011 version 14.4.5, but I have the same problem with printing from Adobe Reader 9.8.5 or Preview 8.0.
    I am running OS X Yosemite 10.10.
    My printer's firmware is "up to date" as of 28-Aug-2014.
    This is what I did:
    1. Open System Preferences from the Apple menu.
    2. Click on the Printers & Scanners icon.
    3. Click on the + sign under the list of printers to add a printer
    4. Click on IP
    5. Enter my IP address in the Address field (verified as "valid and complete host name or address")
    6. Ignore Protocol field (default is Line Printer Daemon - LPD)
    7. Ignore Queue field (default is blank for default queue)
    8. Ignore Name field (default is IP address)
    9. Ignore Location field (default is blank)
    10. Under the Use dropdown menu, I select "Select Software"
    11. HP Deskjet 9800 is not an option.
    I searched for 9800, but there is no HP printer with that number in the options.
    I tried selecting "HP DeskJet 980C - Gutenprint v5.2.3" to see if that would work, but I received the same error message as above. I tried selecting other random HP printers, but so far I've had no luck.
    I've been googling about for a way to manually add a printer driver to this "Select Software" list, but I've found nothing (apparently, no one else wants to do this). I did not find a driver download for the HP DeskJet 9800 for OS X Yosemite 10.10 on the Drivers & Software section of the hp.com website.
    Additional details on settings for Microsoft Word for Mac 2011 version 14.4.5:
    Selected File > Page Setup from menu
    Under the Paper Size drop down menu, I selected manage custom size.
    - Click + to add a paper size
    - Enter "2.75" in width and "6 in" height in the paper size fields.
    - Enter "0 in" as the User Defined Non-Printable Area for top, left, right and bottom.
    - Double-clicked Untiled in the custom size list and rename the size as Receipt
    - Click OK to return to the Page Setup dialog box
    Under Settings: Page Attributes:
    - Format for "HP Officejet Pro 8600"
    - Paper size: Receipt
    - Orientation: "tall/portrait"
    - Scale: 100%
    - Click OK
    Select Format > Document and set all page margins to 0.25"
    Thank you. 

  • Getting error when view - Requested data type does not match with existing

    I have the siebel web service
    In the BI publisher as mentioned in the 'Siebel_BI_Publisher_Integration_Concepts.pdf', I have imported the siebel web service
    BI can recognize the 'Web service' and methods.
    I have created the paramters. The data type is 'String'
    When I try to view the report using the BI publisher, I am getting teh following error in th UI
    "Requested data type does not match with existing data type"
    This is the first time I am using BI publisher to call the Siebel web service. I don't know what this error means
    I don't know whether any log file generated wit the details of this erro message
    Any help is much appriciated
    Thanks,
    Kavitha

    Hi all,
    have you find a fix for this issue? Im facing the same situation, using Complex type, and String data type both in the service and Bi publisher. We are consuming CC&B services, and we have noticed this error appears when BIPublisher is running on WebLogic (10.3) but it does not appear when BIPublisher is running on OC4J , of course running the same report on both application servers.
    Any idea?
    Thanks a lot, regards
    Nestor

Maybe you are looking for