Photostream - error occurred while joining the Photo Stream

I have read/tried out the suggestions from other users with the same issue but I am unable to resolve my issue.
I originally was able to join the Photostream on all my devices.
On the Mac, suddenly I was no longer connected to iCloud.
I eventually managed to log in successfully.
Then Photostream was out of date, as my other device has further received new photos on the stream.
Logging back into iCloud and restarting didnt update the Photostream.
I then  Unsubscribe.  I thought this would mean that I could "easliy" Subscribe again.
But it is now not possible.
I have tried re-subscribing via other devices and it is saying "This photo stream is no longer shared" (But I know it definately is)
I did goto the Message Log and found the following information on clicking the link :"Subscribe to this Photo Stream:
14/12/2013 21:07:41.154 lsboxd[233]: @AE relay 4755524c:4755524c
Please can someone assist me?

Hi newMacUser09,
Welcome to the Support Communities!
The first thing I'd like to address for you is the issue that the photos in the photostream are different on different devices.  Here's how to "reset" it.
iCloud: My Photo Stream troubleshooting
http://support.apple.com/kb/TS3989
I see different photos in My Photo Stream on each of my devices.
Your device will keep up to 1000 photos, even if they are older than 30 days. Photos older than 30 days are removed from the iCloud server, so all devices may not have the same photos, depending on when you enabled My Photo Stream.
If you prefer to have only the most current photos in My Photo Stream on each of your devices, and delete the older photos:
If there are any photos in My Photo Stream that you want to keep, save them to your Camera Roll, then back up your Camera Roll and other data using iCloud or iTunes.
Turn My Photo Stream off in Settings > iCloud > Photos (on a device using iOS 6, go to Settings > iCloud > Photo Stream). Confirm that you wish to Delete Photos.
Turn My Photo Stream back on. iCloud will automatically push your stored photos to your device.
Repeat these steps for each device.
Regarding your shared photo stream, the articles below may be helpful:
iCloud: Troubleshooting iCloud Photo Sharing and Shared Photo Streams
http://support.apple.com/kb/TS4379
Manage subscribers to your shared streams - iCloud Help
http://help.apple.com/icloud/#/mmc0cd7bfa
I hope this information helps ....
Happy Holidays!
- Judy

Similar Messages

  • TS3989 I keep getting this error when I click on the link inviting me to join a Photo Stream: "An error occurred while joining the Photo Stream. Please try again later. "

    I keep getting this error when I click on the link inviting me to join a Photo Stream: "An error occurred while joining the Photo Stream. Please try again later."
    I was the one who set up the Photo Stream and sent the link to myself. I called Apple and they said I did everything right and the server must be temporarily down, but it has been the same for the better part of a day.

    None of the fixes above worked for me.  Continued getting the "try again" error message. 
    Tryed a bunch of things, such as going directly to icloud on Safari to open the mail message, no luck.
    Tryed the following;
    Went to iCloud and logged in via Safari, clicked on my account name in top right corner, selected "Advanced" on drop down menu, and selected "Reset Photo Stream".
    Turned off Photo Stream on all devices and iPhoto.
    Turned on Shared Photo Stream option on Mac iCloud preferences.
    Tried the "Join This Photo Stream" button in my Mac Mail app .me account again.
    Still got the error message.
    Forwarded the original mail message to a yahoo account, selected "Join this Photo Stream" in the yahoo account mail (still in my Mac Mail app), and lo and behold, iPhoto opened and displayed the photos. 
    Could be this would have worked right from the start.
    Oh yea, still get the "try again" message if I click on the Photo Stream button in my .me account.

  • HT201077 An error occurred while joining this photo stream. Please try again later.

    Why am I getting this error message? An error occurred while joining this photo stream. Please try again later.

    Welcome to the Apple Community.
    Have you tried again later. Have you asked the owner if they can access the photos.

  • Error while executing SSIS package - Error: 4014, Severity:20, State: 11. A fatal error occurred while reading the input stream from the network. The session will be terminated (input error: 109, output error: 0)

    Hi,
    We are getting the following error when running our SSIS packages on Microsoft SQL Server 2012 R2 on Windows Server 2008 R2 SP1:
    Error: 4014, Severity:20, State: 11.   A fatal error occurred while reading the input stream from the network. The session will be terminated (input error: 109, output error: 0)
    SQL Server Data Tools and SQL Server Database Engine reside on the same server.
    We tried the following:
    Disabling TCP Chimney Offload
    Installed Windows Server 2008 SP1
    Splitting our SSIS code into multiple steps so it is not all one large continuous operation
    The error occurs during a BulkDataLoad task.
    Other options we are investigating with the engineering team (out-sourced, so delayed responses):
    Firewall configurations (everything is local, so this should not make a difference)
    Disabling the anti-virus scanner
    Are there other things we can try?
    Any insight is greatly appreciated.
    Thanks!

    Hi HenryKwan,
    Based on the current information, the issue can be caused by many reasons. Please refer to the following tips:
    Install the latest hotfix based on your SQL Server version. Ps: there is no SQL Server 2012 R2 version.
    Change the MaxConcurrentExecutables property from -1 to another one based on the MAXDOP. For example, 8.
    Set "RetainSameConnection" Property to FALSE on the all the connection managers.
    Reference:
    https://connect.microsoft.com/SQLServer/feedback/details/774370/ssis-packages-abort-with-unexpected-termination-message
    If the issue is still existed, as Jakub suggested, please provide us more information about this issue.
    Thanks,
    Katherine Xiong
    Katherine Xiong
    TechNet Community Support

  • Error 4014 Severity 16 State A fatal error occurred while reading the input streamfrom the network

    We encounter following error intermittently Error 4014 Severity 20 State 16 , A fatal error occurred while reading the input stream from the network
    I have checked the RING_BUFFER_CONNECTIVITY from sys.dm_os_ring_buffers, we are able to find the remote_host IP where connections are being closed/killed, the error being logged in sys.dm_os_ring_buffers, comes from multiple remote_host, we have raised
    to O/s and Networking Team they seem to have no clue, why this error occurs
    Server: Virtual Machine
    Operating System: WINDOW 2008 R2 SP1
    MSSQL 2008 STD ED SP3 10.0.5850.0
    Database mirroring is configured for the application database.
    Antivirus enable on the database server
    How do we find the cause for this error being logged in SQL server logs, is this error due to SQL database mirroring or memory issue?
    What needs to be checked on the O/s and Network, I have been checking on the internet and everywhere it is pointing to NIC drivers or security patches
    Also in the system events following error was being logged, but after restarting the vm service this error has not re-occurred
    A timeout (30000 milliseconds) was reached while waiting for a transaction response from the VMTools service
    Kindly suggest on Error 4014 Severity 20 State 16, A fatal error how to resolve
    [email protected]

    Hello,
    Could you try to use Network Monitor or WireShark to examine if the connections resets are coming from a client computer
    or from the host where SQL Server is installed?
    Network Monitor can be downloaded from the following link:
    http://www.microsoft.com/en-us/download/details.aspx?id=4865
    If you use Network Monitor trace you will identify connection resets by looking for “TCP: Flags=,,R.A” at the description column on the Frame Summary. Once you find the flag, the Source column will tell you the identity of the host resetting the connection,
    maybe is not the SQL Server host.
    Hope this helps.
    Regards,
    Alberto Morillo
    SQLCoffee.com

  • Azure Sql DB Export to Storage Container fails with "An error occurred while sending the request"

    I've built a new VM from which I'm running PowerShell scripts to backup my databases.  It had worked before on an old server for several months, and worked once on the new server, then I upgraded my Azure PowerShell cmdlets, and haven't been able to
    get it to work again.  The new version is 0.8.10.1.
    Below is my source code, with sensitive stuff replaced with ?'s.  When I display the $stctx and $dbctx, they seem to have reasonable values.  I added the IP address of the server as an exception to the db firewall, and I've installed SQL Server
    Mangement Studio and verified that I can connect to the database.  I have a feeling there's something simple I've overlooked.
    Here's are both error messages:
    Start-AzureSqlDatabaseExport : An error occurred while sending the request.
    At C:\Users\Public\PublicCmds\test.ps1:29 char:1
    + Start-AzureSqlDatabaseExport -SqlConnectionContext $dbctx -StorageContext $stctx ...
    + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
        + CategoryInfo          : NotSpecified: (:) [Start-AzureSqlDatabaseExport], HttpRequestException
        + FullyQualifiedErrorId : Microsoft.WindowsAzure.Commands.SqlDatabase.Database.Cmdlet.StartAzureSqlDatabaseExport
    Start-AzureSqlDatabaseExport : Error while copying content to a stream.
    At C:\Users\Public\PublicCmds\test.ps1:29 char:1
    + Start-AzureSqlDatabaseExport -SqlConnectionContext $dbctx -StorageContext $stctx ...
    + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
        + CategoryInfo          : NotSpecified: (:) [Start-AzureSqlDatabaseExport], HttpRequestException
        + FullyQualifiedErrorId : Microsoft.WindowsAzure.Commands.SqlDatabase.Database.Cmdlet.StartAzureSqlDatabaseExport
    Here is the source code:
    param($dbname)
    if ($dbname -eq $null) {
    write-host "Database code must be specified"
    return
    $password = "????"| ConvertTo-SecureString -asPlainText -Force
    $servercredential = new-object System.Management.Automation.PSCredential("????", $password) 
    $dbsize = 1
    $dbrestorewait = 10
    $dbserver = "????"
    $stacct = $dbname
    $stkey = "????"
    $stctx = New-AzureStorageContext -StorageAccountName $stacct -StorageAccountKey $stkey
    $dbctx = New-AzureSqlDatabaseServerContext -ServerName $dbserver -Credential $servercredential 
    $dt = Get-Date
    $timestamp = "_" + $dt.Year + "-" + ("{0:D2}" -f $dt.Month) + "-" + ("{0:D2}" -f $dt.Day) + "-" + ("{0:D2}" -f $dt.Hour) + ("{0:D2}" -f $dt.Minute)
    $bkupname = $dbname + $timestamp + ".bacpac"
    write-host "db context"
    $dbctx
    write-host "storage context"
    $stctx
    write-host "Backup $dbname to $bkupname"
    Start-AzureSqlDatabaseExport -SqlConnectionContext $dbctx -StorageContext $stctx -StorageContainerName databasebackup -DatabaseName $dbname -BlobName $bkupname

    Hi Brad,
    Mentioned script, with appropriate values, works on my system.
    I'm able to export an Azure SQL database to blob storage. Am using version 0.8.10.1 of cmdlets, so this the same version mentioned in this problem description.
    Can you please try using Add-AzureAccount and check if that helps. This is indicated in a different third-party blog.
    http://answers.flyppdevportal.com/categories/azure/azuretroubleshooting.aspx?ID=8aee89fe-430e-45fe-af54-7c8ed3ac60e1%29."http://answers.flyppdevportal.com/categories/azure/azuretroubleshooting.aspx?ID=8aee89fe-430e-45fe-af54-7c8ed3ac60e1
    Does it work from a different machine with newly downloaded credentials.
    Does it work for a newly created database (so minimal database size).
    If above do not work, we may require additional details like RequestID, StorageAccountName, ServerName so an MS ticket may be more appropriate.
    Girish Prajwal

  • An error occurred while burning the disc.

    I tried to burn some stuff onto a DVD today with my PowerBook. Here's the info on the burner:
    MATSHITA DVD-R UJ-845E:
    Manufacturer: MATSHITA
    Model: MATSHITA DVD-R UJ-845E
    Revision: DMP2
    Serial Number:
    Drive Type: CD-RW/DVD-RW
    Disc Burning: Apple Supported/Shipped
    Removable Media: Yes
    Detachable Drive: No
    I bought some DVD's on sale at Radio Shack, and when I tried to burn a movie and a few photos onto a disc, the progress bar showed it starting to burn, then it stopped and I got this message:
    "An error occurred while burning the disc. This disc cannot be used."
    A little research here at the Apple forum brought me to this site:
    http://www.digitalfaq.com/media/dvdmedia.htm
    And after downloading a little program called DVD Media Inspector, I was able to classify the DVD's I had bought as:
    "4TH CLASS MEDIA:
    Pathetic garbage media, landfill material, about 0-50% success rate...."
    OK, off to Mega Lo Mart, where I bought some nice, expensive Maxell DVD's.
    Media Inspector doesn't see my fancy new DVD's. When I try to burn stuff using the Finder, I get the same result as before.
    Getting desperate at that point, I located and downloaded updated firmware for my model of Matshita superdrive. I'm not sure what firmware is, and there was a free range one and a standard one, so I went for the standard one. There were dire warnings in the readme file about "flashing" a superdrive being on the same risk level as open heart surgery. I flashed my superdrive. (You can say that here, and it's not dirty.)
    I also tried burning using iDVD, and after much preparation, it started to burn, then spit out the DVD. I tried three of the landfill DVD's and two of the Maxell ones. I'm out of things to try. Any ideas?
    I have never tried burning DVD's before. Am I doing something wrong?

    I tried again using iDVD's One-Step DVD making feature. It will let you make a one step from a movie file, and I had a .dv version of the movie I want to burn.
    It encoded video for a while, encoded audio for a little while, then started to burn. The superdrive made some noises, then the DVD was ejected and I got an error message saying:
    "Burning Finished
    Errors were found during the burning process"
    I hit OK (though it really wasn't OK) and got another error message box. This one said:
    "Multiplexer error
    (some message about multiplexing problem)"
    The message didn't make sense to me, and I was unable to remember it. What's a multiplexer? I would have guessed an avid movie-goer, but somehow I think that is not it.

  • When I tried to back up my computer, Time Machine says 'an error occurred while creating the backup folder.' When I check the side of the partition where I manually saved old files, the folders are there, but NONE of the files are.

    I haven't backed up my computer in over a year. When I tried to back it up today, Time Machine says 'an error occurred while creating the backup folder.' When I check the side of the partition where I manually saved old photos and documents (including all the pictures from the year I studied abroad/traveled a bunch), the folders are there, but NONE of the files are.
    Does anyone have any idea what the problem might be, or how I could fix it? I really don't want to lose all those photos

    So you were doing a time machine backup to another partition on the same hard drive? Just trying to gather some information so i can provide a helpful response.

  • An error occurred while downloading the firmware

    I have several AirPort's in my home network that have available firmware updates, according to the Airport Utility version 6.3.2 of my iMac (running Mavericks), but cannot update them because I keep getting an error saying "An error occurred while downloading the firmware". Needless to say that my iMac, and my home network, have an active and very decent Internet connectivity.
    My Time Capsule has firmware version 7.7.2 and an AirPort Express has firmware version 7.6.3. I have another Airport Express running with version 7.6.4 that does not needs an update. Every time that I try to update the AirPort devices that report an available update I keep getting the same download firmware error message. This has been going on for days. How can I update these two AirPort devices, or fix my AirPort Utility?
    In the directory /Users/me/Library/Application Support/Apple/Airport/Firmware there is a file called version.xml. If I rename it, and restart the AirPort Utility, my AirPort devices would not report an available firmware upgrade. I tried resetting both AirPort devices and trying to re-update the firmware but keep getting the same error message. Any help will be greatly appreciated. Thanks.

    Are you behind a firewall or double NAT??
    What is the device that is immediately plugged into the main modem or router? Has that one been able to update?
    It is plugged in of course isn't it.. no nasty join wireless anywhere??
    The best way to work around these sort of problems is to simplify the network.. Plug each device directly into the main router.. by ethernet. You can trigger the firmware upgrade by wireless but use ipad or iphone version of airport utility and see what happens.

  • I have been using iTunes for years to connect to radio and just recently tried to get on and sign pops up stating " A error occurred while contracting the radio tuning service. Check your internet connection or try again later "  I do but the same respons

    I have been using iTunes for years to connect to the radio and just recently tried to tune in and an error sign pops up stating " A error occurred while contracting the radio tunning service. Check your internet connection or try again later." There's no problrm with my internet service so what's up?

    You are probably using an old version of iTunes with which the stream link service seems to have stopped working for many users of older iTunes.  No, Apple makes no comment about this kind of thing.  It may reappear, it may not (it has been dead for over a week now).  Your solution is to upgrade the operating system version on your computer from 10.5.8 to 10.6.8 so you can run a newer iTunes, or live without.  You can still open streams if you can get the URL, and you can then save them as playlist items.

  • Internal Error occurred while calling the ProcessDPCommands API

    We have installed Business Objects XI  with MySQL. We are getting following error when we click on view query on the WEBI Reports
    " Internal Error occurred while calling the ProcessDPCommands API  Error WIS 30270".
    When we change the CMS database to ORACLE everything works fine it looks like some issues when CMS database is MYSQL
    Please hep to fix this problem
    Installation is on Solaris 10
    Edited by: AshishDatar on Nov 6, 2009 3:00 PM
    Installation is on Solaris 10

    did you check whether universe connection is pointing to the correct db?The following url might be helpful:
    [http://www.forumtopics.com/busobj/viewtopic.php?t=52355&view=previous]

  • An error occurred while preparing the installation. Try running the application again

    I Have erased the hard drive of my MBP in order to perform a clean reinstall of OS X Mavericks, according to these instructions.
    When I tried to reinstall, my internet connection stopped (was broadcasting via another MBP and the cable from that one got disconnected), so I restarted the erased MBP to try again. Holding command+R, it booted in internet recovery (as the recovery partition was erased along with the rest of the hard drive), but could not connect over the broadcasted WiFi, so I created a bootable USB flash drive according to these instructions on the other MBP.
    This installation went smooth without any hiccups, but due to an oversight I had to do it again the next day.
    I took the same steps, with the same bootable drive (I did not create a new one the first time) but this time I couldn’t get through the prepare to install phase. At the end, where the “about a second remaining” message stays for about 20 minutes, I get the “An error occurred while preparing the installation. Try running the application again” message. When I quit the installer (only option at that stage) and return to Disk Utility, the internal drive on which I tried to do the installation is not visible anymore.
    I tried this (after a reboot every time) with a new bootable usb drive with the same download of the OS X Mavericks installer and with a new one, each ending with the same error. The installer was downloaded on an MBP on which Mavericks is also installed, with the same Apple ID. The App Store did not allow me to change Apple ID for the Mavericks download. Can this pose a problem? It did work the first time, though.
    Note that this error occurs at a different stage than the one with the same message due to the wrong date (this discussion amongst others). I also checked the date in terminal and this appears to be correct, when I consider the timezone.
    Here are a few lines from the installer log (omitted similar lines and lines that could contain personal information). The most important line is the last one, indicating the error.
    Jun 22 02:14:01 localhost Install OS X Mavericks[423]: @(#)PROGRAM:Install  PROJECT:Install-846
    Jun 22 02:14:01 localhost Install OS X Mavericks[423]: @(#)PROGRAM:IA  PROJECT:InstallAssistant-476.8
    Jun 22 02:14:01 localhost Install OS X Mavericks[423]: Hardware: MacBookPro9,2 @ 2.50 GHz (x 4), 4096 MB RAM
    Jun 22 02:14:01 localhost Install OS X Mavericks[423]: Running OS Build: Mac OS X 10.9.3 (13D65)
    Jun 22 02:14:01 localhost Install OS X Mavericks[423]: Env: DYLD_NO_FIX_PREBINDING=1
    Jun 22 02:14:01 localhost Install OS X Mavericks[423]: Env: __CF_USER_TEXT_ENCODING=0x0:0:0
    Jun 22 02:14:01 localhost Install OS X Mavericks[423]: Env: PATH=/usr/bin:/bin:/usr/sbin:/sbin
    Jun 22 02:14:01 localhost Install OS X Mavericks[423]: Env: PWD=/
    Jun 22 02:14:01 localhost Install OS X Mavericks[423]: Env: SHLVL=1
    Jun 22 02:14:01 localhost Install OS X Mavericks[423]: Env: __OSINSTALL_ENVIRONMENT=1
    Jun 22 02:14:01 localhost Install OS X Mavericks[423]: Env: CI_DEFAULT_OPENCL_USAGE=0
    Jun 22 02:14:01 localhost Install OS X Mavericks[423]: Env: OS_INSTALL=1
    Jun 22 02:14:01 localhost Install OS X Mavericks[423]: Env: _=/System/Library/CoreServices/Language Chooser.app/Contents/MacOS/Language Chooser
    Jun 22 02:14:38 localhost Install OS X Mavericks[423]: Using distribution archive from /Volumes/Install OS X Mavericks/Install OS X Mavericks.app/Contents/SharedSupport/OSInstall.mpkg
    Jun 22 02:14:38 localhost Install OS X Mavericks[423]: Configuring products from SharedSupport folder
    Jun 22 02:14:38 localhost Install OS X Mavericks[423]: Install is double-dmg. Not adding chunklist to download list.
    Jun 22 02:14:38 localhost Install OS X Mavericks[423]: Using product <OSInstallDVDProduct> based on media at /Volumes/Install OS X Mavericks/Install OS X Mavericks.app/Contents/SharedSupport at distance 5
    Jun 22 02:14:38 localhost Install OS X Mavericks[423]: Using product <OSInstallESDProduct> based on distribution at /Volumes/Install OS X Mavericks/Install OS X Mavericks.app/Contents/SharedSupport/OSInstall.mpkg at distance 5
    Jun 22 02:14:38 localhost Install OS X Mavericks[423]: Checking Software Update catalog URL https://swscan.apple.com/content/catalogs/others/index-10.9-mountainlion-lion-sn owleopard-leopard.merged-1.sucatalog
    Jun 22 02:14:39 localhost Install OS X Mavericks[423]: JS: installCheckScript threw exception TypeError: 'null' is not an object (evaluating 'my.target.systemVersion')
    Jun 22 02:14:39 localhost Install OS X Mavericks[423]: No available package ref for compatibility update. Ignoring.
    Jun 22 02:14:39 localhost Install OS X Mavericks[423]: *** IFDCustomizationController_10_6 does not know the size of distant package at (null)
    Jun 22 02:14:39 localhost Install OS X Mavericks[423]: *** IFDCustomizationController_10_6 does not know the size of distant package at (null)
    Jun 22 02:14:39 localhost Install OS X Mavericks[423]: Can not connect to /var/run/systemkeychaincheck.socket: No such file or directory
    Jun 22 02:14:39 localhost Install OS X Mavericks[423]: Could not load Software Update catalog: Error Domain=NSURLErrorDomain Code=-1009 "The Internet connection appears to be offline." UserInfo=0x7fedd960ccc0 {NSUnderlyingError=0x7feddc866ef0 "The Internet connection appears to be offline.", NSErrorFailingURLStringKey=https://swscan.apple.com/content/catalogs/others/index-10.9-mountainlion-lion-sn owleopard-leopard.merged-1.sucatalog, NSErrorFailingURLKey=https://swscan.apple.com/content/catalogs/others/index-10.9-mountainlion-lion-sn owleopard-leopard.merged-1.sucatalog, NSLocalizedDescription=The Internet connection appears to be offline.}
    Jun 22 02:14:39 localhost Install OS X Mavericks[423]: Could not fetch SWU catalog to create SWU product
    Jun 22 02:14:49 localhost Install OS X Mavericks[423]: LSExceptions [0x7fedd9446e50] unloaded
    Jun 22 02:15:12 localhost Install OS X Mavericks[423]: No available package ref for compatibility update. Ignoring.
    Jun 22 02:15:12 localhost Install OS X Mavericks[423]: *** IFDCustomizationController_10_6 does not know the size of distant package at (null)
    Jun 22 02:15:12 localhost Install OS X Mavericks[423]: *** IFDCustomizationController_10_6 does not know the size of distant package at (null)
    Jun 22 02:20:55 localhost Install OS X Mavericks[423]: Created IATool object:dbe23a50
    Jun 22 02:20:56 localhost Install OS X Mavericks[423]: Could not find package ref in any source for: com.apple.pkg.BaseSystemBinaries
    —a lot of similar messages, but for other packages —
    Jun 22 02:20:56 localhost Install OS X Mavericks[423]: No available package ref for compatibility update. Ignoring.
    Jun 22 02:21:09 localhost Install OS X Mavericks[423]: Preventing machine sleep.
    Jun 22 02:21:42 localhost Install OS X Mavericks[423]: Using product IA_PKSecureNetEnabledProduct <file:///Volumes/schijf/OS%20X%20Install%20Data/> at distance 5
    Jun 22 02:21:42 localhost Install OS X Mavericks[423]: Using existing boot files dir at /Volumes/Install OS X Mavericks/.IABootFiles
    Jun 22 02:21:42 localhost Install OS X Mavericks[423]: Using mutable product path: /Volumes/schijf/OS X Install Data
    Jun 22 02:21:42 localhost Install OS X Mavericks[423]: Using boot files path: /Volumes/Install OS X Mavericks/.IABootFiles
    Jun 22 02:21:42 localhost Install OS X Mavericks[423]: Could not find package ref in any source for: com.apple.pkg.BaseSystemBinaries
    —a lot of similar messages, but for other packages —
    Jun 22 02:21:42 localhost Install OS X Mavericks[423]: Could not find package ref in any source for: com.apple.pkg.OSInstall
    Jun 22 02:21:42 localhost Install OS X Mavericks[423]: No available package ref for compatibility update. Ignoring.
    Jun 22 02:21:42 localhost Install OS X Mavericks[423]: Could not find package ref in any source for: com.apple.pkg.BaseSystemBinaries
    —a lot of similar messages, but for other packages —
    Jun 22 02:21:42 localhost Install OS X Mavericks[423]: Could not find package ref in any source for: com.apple.pkg.OSInstall
    Jun 22 02:21:42 localhost Install OS X Mavericks[423]: No available package ref for compatibility update. Ignoring.
    Jun 22 02:21:42 localhost Install OS X Mavericks[423]: Retrieving 0 packages (0.000 GB)
    *****This is where the timer starts saying “”About a minute remaining”*****
    Jun 22 02:21:42 localhost Install OS X Mavericks[423]: Verifying InstallMacOSX.pkg/InstallESD.dmg
    Jun 22 02:42:36 localhost Install OS X Mavericks[423]: Finished operation queue
    Jun 22 02:42:36 localhost Install OS X Mavericks[423]: Opening /Volumes/Install OS X Mavericks/Install OS X Mavericks.app/Contents/SharedSupport/InstallESD.dmg
    Jun 22 02:42:38 localhost Install OS X Mavericks[423]: Extracting boot files from /Volumes/OS X Install ESD/BaseSystem.dmg
    Jun 22 02:42:39 localhost Install OS X Mavericks[423]: Extracting Boot Bits from Inner DMG:
    Jun 22 02:42:41 localhost Install OS X Mavericks[423]: Copied kernelcache
    Jun 22 02:42:42 localhost Install OS X Mavericks[423]: Copied Boot.efi
    Jun 22 02:42:42 localhost Install OS X Mavericks[423]: Copied PlatformSupport.plist
    Jun 22 02:42:42 localhost Install OS X Mavericks[423]: Ejecting disk images
    Jun 22 02:42:42 localhost Install OS X Mavericks[423]: Generating the com.apple.Boot.plist file
    Jun 22 02:42:42 localhost Install OS X Mavericks[423]: com.apple.Boot.plist: {
          "Kernel Cache" = "/.IABootFiles/kernelcache";
          "Kernel Flags" = "container-dmg=file:///Install%20OS%20X%20Mavericks.app/Contents/SharedSupport/ InstallESD.dmg root-dmg=file:///BaseSystem.dmg";
    Jun 22 02:42:43 localhost Install OS X Mavericks[423]: Done generating the com.apple.Boot.plist file
    Jun 22 02:42:43 localhost Install OS X Mavericks[423]: Blessing /Volumes/Install OS X Mavericks -- /Volumes/Install OS X Mavericks/.IABootFiles
    Jun 22 02:42:43 localhost Install OS X Mavericks[423]: Blessing Mount Point:/Volumes/Install OS X Mavericks Folder:/Volumes/Install OS X Mavericks/.IABootFiles plist:com.apple.Boot.plist
    Jun 22 02:42:43 localhost Install OS X Mavericks[423]: ***************************** Setting Startup Disk *****************************
    Jun 22 02:42:43 localhost Install OS X Mavericks[423]: ******           Path: /Volumes/Install OS X Mavericks
    Jun 22 02:42:43 localhost Install OS X Mavericks[423]: ******     Boot Plist: /Volumes/Install OS X Mavericks/.IABootFiles/com.apple.Boot.plist
    Jun 22 02:42:43 localhost Install OS X Mavericks[423]: /usr/sbin/bless -setBoot -folder /Volumes/Install OS X Mavericks/.IABootFiles -bootefi /Volumes/Install OS X Mavericks/.IABootFiles/boot.efi -options config="\.IABootFiles\com.apple.Boot" -label OS X Installer
    Jun 22 02:42:43 localhost Install OS X Mavericks[423]: Bless on /Volumes/Install OS X Mavericks succeeded
    Jun 22 02:45:55 localhost Install OS X Mavericks[423]: Got error in writing to /Volumes/schijf/OS X Install Data/minstallconfig.xml
    That last line indicates the error that occurred. (The internal drive on which I try to install Mavericks is called “schijf”, it also already has been called Macintosh HD, with no effect. This time I tried another name during the reformat to see if and when the installer renames the disk. Does it do this, or should I call the disk “Macintosh HD” myself?)
    By now I also got past the internet recovery issues, being able to get the progress bar under the spinning globe and the option to install Lion (not Mavericks, but I suppose that’s because the MBP shipped with Lion). When I choose this option, the installer first spends a few hours downloading additional components. This eventually took less time than first indicated, but still about 4-5 hours. After this, the installation of about 24 minutes starts, but this takes much longer than the indicated 24 minutes, each minute taking about 15 minutes. When it was less than a minute, the internet connection got disconnected (but I don’t suppose it still needed an internet connection at this stage, having downloaded all additional components) and now the “Less than a minute” message has been there the whole night (about 9,5 hours), the last 9 hours with a spinning beachball on the screen after I accidentally clicked somewhere on the screen (nowhere in particular, he shouldn’t do something because of the click. After unplugging the power adapter, the battery icon on the screen wasn’t updated, and the WiFi icon simply disappeared, instead of showing no bars like it should when there’s no connection).
    Does Anyone know how I can fix the error, because I would prefer installing with a bootable drive. Is it worth it to continue waiting on the current, apparently stuck Lion installer to finish or should I force a reboot?
    Can I try using the Recovery Disk assistant (OS X Recovery Disk Assistant v1.0) to create a recovery disk with the other MBP? I think not, as this might cause trouble with 2 different MBP's using the same license.
    Thanks in advance!

    Since this thread seems to be gaining more speed than the other one i'm working on, i figured i'd add these images to help you all out detailing the exact problem.
    I'm having the same issue and I wanted to provide some info specific to my mac, and some info in general to help with diganosis.
    First, my specs
    Secondly, I am running an aftermarket 500 GB drive.
    Third, not sure if this is realated, but this screen suggests the proress will take 3 minutes, then it abruptly umps to the restart phase after about 1.5 - 2.5 minutes.
    And finally, here is the seeminly unavoidable error message.
    Also, other things I've tried now are
    installing it from the "show package contents area",
    mounting said DMG and trying to install from there.
    installing a package file called "upgradeos.pkg"
    no luck.

  • Time capsule won't back up - Unable to complete backup. An error occurred while creating the backup folder. Any ideas?

    I have tried all the resets, the firmware is the latest version, the green light is on.
    But I get this message "Unable to complete backup. An error occurred while creating the backup folder."
    Any ideas?

    Do setup again.. but make sure both your wireless and your ethernet have ipv6 turned on to local link.
    Done this OK, but no idea about IPv6 - something new to me and rather Appley I think?
    Unplug the WAN for the moment.. Just LAN port TC to the MBPr ethernet via thunderbolt.. (thunderbird was the kids puppet series.. Thunderbirds are go!!). Done - New real people Thunderbirds movie coming out soon I believe!!!
    Reset the TC again.. sorry.. !! You're welcome ... done.
    Make sure the ethernet now has an IP address.. 10.0.1.2 - Yep - done that - on ethernet anyway ...
    You need to open the network preferences to find out. Yep - that's good ...
    ****** I then reconnect the TC WAN to the router - is this right?
    And then I think I start going round in circles ... boot, reboot, restart, reboot again ...
    The final result is green light on TC, but error message when trying TM is "Backup disk is not available".
    Then open the airport utility and you should be able to setup the TC.
    Do as little setup as possible and then run the TM backup and see how it goes.
    I have managed to get Thunderbird to LAN on TC to create a folder on TC and copy a file onto it.
    So I guess the drive is working - it must be the software, settings or perhaps even the operator that isn't quite so clever ...
    I named network RFG, named device RFGTC.  RFG network shown as IP 192.168.0.72
    Wireless router is BT Homehub 3 with IP of 192.168.0.254 - is this issuing new IP addresses when rebooting TC?
    I have three wireless networks here - the BT Homehub3 wireless, the TC wireless, and also a D-link power socket ethernet thingy for an ethernet connection to the telly - DHP-W310AV which is also wireless link.  All are effectively connected to the BT Homehub - is there a conflict there?
    Have several times achieved in Airport Utility schematic with internet shown as green, RFGTC shown as green, light on TC green, but no TM backup run ... "backup disc not available."
    And there are no tall building around here to hurl myself off ... at least you can go to Sydney Harbour bridge - not too far away ... it was my son in Sydney that persuaded me to scrap Windows and go Apple ... it's all his fault ...

  • Excel, PowerView error in SharePoint 2013: "An error occurred while loading the model for the item or data source 'EntityDataSource'. Verify that the connection information is correct and that you have permissions to access the data source."

    I've installed SQL Server 2012 SP1 + SP server 2012 + SSRS and PowerPivot add-in.
    I also configured excel services correctly. Everything works fine but the powerview doesn't work!
    While I open an excel workbook consist of a PowerView report an error occurs: "An error occurred while loading the model for the item or data source 'EntityDataSource'. Verify that the connection information is correct and that you have permissions
    to access the data source."
    error detail: 
    <detail><ErrorCode xmlns="http://www.microsoft.com/sql/reportingservices">rsCannotRetrieveModel</ErrorCode><HttpStatus xmlns="http://www.microsoft.com/sql/reportingservices">400</HttpStatus><Message xmlns="http://www.microsoft.com/sql/reportingservices">An
    error occurred while loading the model for the item or data source 'EntityDataSource'. Verify that the connection information is correct and that you have permissions to access the data source.</Message><HelpLink xmlns="http://www.microsoft.com/sql/reportingservices">http://go.microsoft.com/fwlink/?LinkId=20476&amp;EvtSrc=Microsoft.ReportingServices.Diagnostics.Utilities.ErrorStrings&amp;EvtID=rsCannotRetrieveModel&amp;ProdName=Microsoft%20SQL%20Server%20Reporting%20Services&amp;ProdVer=11.0.3128.0</HelpLink><ProductName
    xmlns="http://www.microsoft.com/sql/reportingservices">Microsoft SQL Server Reporting Services</ProductName><ProductVersion xmlns="http://www.microsoft.com/sql/reportingservices">11.0.3128.0</ProductVersion><ProductLocaleId
    xmlns="http://www.microsoft.com/sql/reportingservices">127</ProductLocaleId><OperatingSystem xmlns="http://www.microsoft.com/sql/reportingservices">OsIndependent</OperatingSystem><CountryLocaleId xmlns="http://www.microsoft.com/sql/reportingservices">1033</CountryLocaleId><MoreInformation
    xmlns="http://www.microsoft.com/sql/reportingservices"><Source>ReportingServicesLibrary</Source><Message msrs:ErrorCode="rsCannotRetrieveModel" msrs:HelpLink="http://go.microsoft.com/fwlink/?LinkId=20476&amp;EvtSrc=Microsoft.ReportingServices.Diagnostics.Utilities.ErrorStrings&amp;EvtID=rsCannotRetrieveModel&amp;ProdName=Microsoft%20SQL%20Server%20Reporting%20Services&amp;ProdVer=11.0.3128.0"
    xmlns:msrs="http://www.microsoft.com/sql/reportingservices">An error occurred while loading the model for the item or data source 'EntityDataSource'. Verify that the connection information is correct and that you have permissions to access the
    data source.</Message><MoreInformation><Source>Microsoft.ReportingServices.ProcessingCore</Source><Message msrs:ErrorCode="rsErrorOpeningConnection" msrs:HelpLink="http://go.microsoft.com/fwlink/?LinkId=20476&amp;EvtSrc=Microsoft.ReportingServices.Diagnostics.Utilities.ErrorStrings&amp;EvtID=rsErrorOpeningConnection&amp;ProdName=Microsoft%20SQL%20Server%20Reporting%20Services&amp;ProdVer=11.0.3128.0"
    xmlns:msrs="http://www.microsoft.com/sql/reportingservices">Cannot create a connection to data source 'EntityDataSource'.</Message><MoreInformation><Source></Source><Message>For more information about this error navigate
    to the report server on the local server machine, or enable remote errors</Message></MoreInformation></MoreInformation></MoreInformation><Warnings xmlns="http://www.microsoft.com/sql/reportingservices" /></detail>
    Please help me to solve this issue. I don't know if uploading the excel workbook is enough or maybe It needed to connect to another data source.
    I Appreciate in advance.

    Hi Ali.y,
    Based on the current error message, the error can be related to the
    Claims to Windows Token Service (C2WTS) and is an expected error under certain conditions. To verify the issue, please check the aspects below:
         1. The C2WTS Windows service and C2WTS SharePoint service are both running.
         2. Check the SQL Server Browser service is running on the machine that has the PowerPivot instance of SSAS.
         3. Check the domain. You're signing into SharePoint with a user account in some domain (call it Domain A).  When Domain A is equal to Domain B which SharePoint server itself is located (they're the same domain), or Domain
    A trusts Domain B.
    In addition, the error may be caused by Kerberos authentication issue due to missing SPN. In order to make the Kerberos authentication work, you need to configure the Analysis Services to run under a domain account, and register the SPNs for the Analysis
    Services server.
    To create the SPN for the Analysis Services server that is running under a domain account, run the following commands at a command prompt:
    • Setspn.exe -S MSOLAPSvc.3/Fully_Qualified_domainName OLAP_Service_Startup_Account
    Note: Fully_Qualified_domainName is a placeholder for the FQDN.
    • Setspn.exe -S MSOLAPSvc.3/serverHostName OLAP_Service_Startup_Account
    For more information, please see:
    How to configure SQL Reporting Services 2012 in SharePoint Server 2010 / 2013 for Kerberos authentication
    Regards,
    Heidi Duan
    Heidi Duan
    TechNet Community Support

  • Job submission failed : error occurred while scheduling the job. org.quartz.objectalreadyexistsexception: unable to store job with name

    Experts,
    Please help me out here,Am facing this issue while scheduling a job in BIPublisher.
    job submission failed : error occurred while scheduling the job. org.quartz.objectalreadyexistsexception: unable to store job with name
    Thanks,

    You are probably installing on a hardened machine.
    The "installation guide" says that if you are doing so, you need to create a file named libx11.so.4 and update your LD_LIBRARY_PATH (see http://docs.iplanet.com/docs/manuals/messaging/ims52/ig/unix/overview.htm)but:
    1- the library name is libX11.so.4 and
    2- for jre a common file is not enough, you need to install SUNWxwplt at least. This will install the library on /usr/openwin/lib.
    You can check the results running <server-root>/bin/base/jre/bin/jre
    Hope that helps and sorry about my poor english.

Maybe you are looking for