Physical page numbers

Hi,
I have an Report which has multiple queries and hence has multiple layouts associated with each of the queries. My problem is that I need to print out the page numbers on the footer( which is not a big deal), but I need to reset the numbering at the end of each of the layouts.
Basically I want to combine 14 reports into one and want to maintain the page numbers as if they were individual reports.
I'm using Reports 3.0
Thanks,
Aditya.

hello Aditya Sharma,
look at 'Page Numbering' in property of your field with source Page Number. There you can find Reset at fild - default &Report. You can specify here repeating frame ...
Hope this helps

Similar Messages

  • Page numbers do not refresh to page.  What to do?

    I downloaded Digitial edition and two e-books just fine to my PC.  However, when I try to toggle to the next page or a different page, each way I tried does not work as it stays to the same page.  I've tried the bottom where you click to the next page, the top where you find page number, etc.  Please help!

    Hi blutruk
    Viewer always shows logical page numbers by default.If you want to see physical page numbers, turn off the "Use logical page numbers" preference under "Page Display" panel in Preferences dialog.
    See if that helps
    ~Deepak

  • IBooks 2.1 and digital/print page numbers

    The iTunes store says of the upgrade to iBooks 2.1 that it can show page numbers that correspond to the printed edition of select titles.
    I've searched about but can find no detail on if or whether this applies to.ibooks format or more generically to .epub format.
    Any ideas?

    I'm guessing you're correct, though there is a method of correllating physical page numbers with documents in epub.  I'm hoping this isn't a fixed length only thing or an iBooks Author only thing.  For legal or educational books, having the ability to reference a specific page that's the same as it is in print is very important.  As a matter of fact legal citations often reference page numbers.
    So far Apple is doing a good job of providing a book reader that does more than novels, I hope the addition of page numbers is one of them.  Note I have tried the epub method, but I can't get it to work, so I'm not sure if I'm messing up with the coding or if this isn't supported.

  • Page Numbering on repeating frame with 3 logical pages per physical page

    We have a report in Reports 6i that prints a form on continous multi-part paper. We are converting the report to print to a laser printer with three forms per page. Each form has page numbers in the format of "page 1 of 15". The "page" refers to the form number and the "of" refers to the total number of forms for the outer group. So we could have page 1 of 15 through page 15 of 15 followed by page 1 of 112, etc.
    I have tried all of the suggestions on how to base page numbers on a repeating frame and non of them seem to work. All the examples seem to be based on the idea that the logical page contains 1 or more physical pages; whereas my situation is that I have multiple logical pages on each physical page.
    Does anyone have a thought on how to do this?

    Create one summary column (lets say cs_pagenumber) in inner group and provide following:
    Function: Count
    Source: any field from innrer group
    Reset At: outer group
    Create one summary column (lets say cs_totalpages) in outer group and provide following:
    Function: Count
    Source: any field from innrer group
    Reset At: outer group
    (above will work if one field is printed only once in a form)
    Create a field in inner repeating frame for cs_pagenumber and create a boilerplate text (&cs_totalpages) in the same repating frame for cs_totalpages. This should solve the problem.
    Hope this helps.

  • How to print page numbers on physical pages conditionally?

    Hi,
    my report has a single logical page comprising of 3 reapeating frames , each getting printed on 3 different physical pages. I need to print page number at the bottom of the page in the case of two repeating frames while on the side of the page in the third case. How do I do this?
    TIA
    Ranjit

    i think u only need to say page break before on ur third repeating frame and ur problem is solve.
    repeating frame 1 and 2 on the firstpage getting page 1 and repeating 3 on page 2.
    cheers.

  • Page numbers from deleted book file persist in document

    I have 4 documents that I needed to merge so I attempted to put them in a book file (which I am not at all familiar with how to use). I removed the documents from the book file because it was not doing what I needed it to do, but the auto section page numbers are persisting in the individual documents and I cannot get rid of them. For example I have page numbering starting on page 5, but pages 1-4 have page numbers 5-8 on them and I cannot get rid of them. (I can do this manually of course but would like to know why they are persisting)

    Do you mean the numbers physically appear on the pages and you don't want them there (if so, delete them from the master page(s)) or do you mean the numbering scheme is wrong (if so, check your section and numbering options)?

  • Printing in Pages - Missing page numbers

    I've been having a problem printing from my MacBook using Pages 08 to my HP PSC 2210 physically connected to a networked PC (using the Gutenprint 5.1.3 HP PSC 2210 driver -- Which works fine normally...)
    In printing a single half page of text, the page numbers show up fine.. However once I get past the end of page 1, I lose whatever is in the footer (Page # in this case) -- Even if page 8 only has a half page of text, it wont print any page #...
    It almost seems that I am printing a 8x12 page on an 8x11 piece of paper... (But all the non-footer text is there, so that doesnt seem to be the case...)
    I tried installing the Mac driver for the printer, but the same thing happened..
    Any suggestions?

    Jerry, it wasnt the "First Page is Different" thing, but in going to the layout inspector (which I didnt know about -- I'm normally a MS Word guy), I found the footer margin for the 8 page document was .31, and the Bottom Document margin was ..25 -- I changed it to Bottom=.75 and footer=.25 and it works fine...
    Thanks for setting me down the right track!

  • Adjusting page numbering in the Table of Contents

    I have a question regarding adjusting page numbering in the table of contents. I have manually adjusted my page numbering to start at page 3, which is now called page 1. But my table of contents still show this page as page 3, while I want it to be shown as page 1.
    How do I do this?
    I tried to find an answer somewhere on this forum, but I couldn't find one. Neither could I find a solution in the help file.
    I hope you understand my question. I also included the document, which might be of help. Thank you!

    This answer assumes that your document uses the Default page style for physical pages 1-3. You are going to need two different page styles to accomplish what you want. (I'm guessing you have used a page number offset of -2 to get your physical page 3 numbered as 1 and this simply will not work in the TOC.)
    Put your cursor in the Title page (physical page 1) and open the Stylist (F11). Click the Page icon (4th from left) then click the New Style From Selection icon (2nd from right). Give it a name like 'Body'. Before you close the Stylist double click on Default just to make sure you did not change the style of the 1st page.
    While you are still on the 1st page click into the footer and remove the page number field assuming you do not want it.
    Put you cursor in the FIRST (1st) paragraph of the 3rd page and do **Format > Paragraph > Text Flow tab. In the Breaks section, check the Enable box, if not already checked, then check the With Page Style box, select the Body style from the drop down menu and set the page number to 1.
    If the page number field is still in the footer on this page then delete it and insert it again. It should now show 1.
    Click into the TOC, right click and select Update Index/Table.
    Just in case you have trouble translating this to your version of SO I have fixed your document and have attached it.
    * *To change to a new page style while writing your document do Insert > Manual Break > Page Break and select the new style. If you want a new page number you can check that box and set the new number.  

  • Printing bug with logical page numbers

    I have a PDF file set up with logical page numbering. If I want to print page 7-10 and type this in the Pages field, Reader prints physical pages 7 through 10 from the PDF file instead of logical page 7-10. I tried it in Reader X and XI and the problem occurs in both. I am pretty sure it worked in early versions, but I don't know what version it stopped working on. Is this a known issue?
    Rick

    Could it be that this file contains duplicate page labels? Can you share the file?

  • Reset page numbers of Pdf using acrobat dls

    I am working on a vb.net project, its a windows service. In my class library I am trying to merge two PDFs, but once merged I have to reset the page numbers. Can anyone help me on how to achive this?? Below is my code.
    Private Sub MergePdfs()
    Dim pdfFile As String = "C:\Cognizant\Merge\Letter -Sample for RRD_Pgno in Red for reference.pdf" 
    Dim insertPdf As String = "C:\Cognizant\Merge\Insert.pdf" 
    Dim pdfDoc As New Acrobat.AcroPDDoc 
    Dim insertDoc As New Acrobat.AcroPDDoc 
    Dim mergeDoc As New Acrobat.AcroPDDoc 
    Dim b As Boolean = False   
    b = mergeDoc.Open(pdfFile) 
    Dim i As Integer = mergeDoc.GetNumPages()   
    b = insertDoc.Open(insertPdf) 
    b = mergeDoc.InsertPages(1, insertDoc, 0, insertDoc.GetNumPages(), False)   
    b = mergeDoc.DeletePages(4, 5)   
    b = mergeDoc.Save(1, "C:\Cognizant\Merge\MergedFile1.pdf") 
    mergeDoc.Close()   
    pdfDoc.Close() 
    insertDoc.Close() 
    End Sub

    You can print the page number in the margin of the report, outside the frames. In the margin, create a field with source Physical Page Number. In the Page Numbering property, set the Reset At property to the frame you want.

  • 11g page numbers

    Upon running some 10g reports on 11g, the page numbering went sour.
    What used to be "Page 1 of 2" became "Page 23414 of 23415".
    The 10g report main section margin contains "Page: &<F_4> of &<F_5>"
    where F_4 is Physical Page Number
    and F_5 is Total Physical Pages.
    Page numbering property is set to main and trailer, start and increment = 1, reset on report.
    What can be done to correct the mis-numbering ?
    Thanks for your time.

    Hello Mike,
    we have the problem, that the page numbers increment by 65536 and until now (for almost one year) Oracle could not fix it. As a workaround we change the report on the application server by converting them into XML, replace the 65536 with 1 and convert them back to rdf before compiling them.
            sed     -e 's/startAt=\"65536\"/startAt=\"1\"/g' \
            -e 's/incrementBy=\"65536\"/incrementBy=\"1\"/g' \
            -e 's/pageNumber=\"65536\"/pageNumber=\"1\"/g' \
            ${MODUL_XML} > ${MODUL_TMP}Regards
    Marcus

  • Previewing Pages document in Preview shows page numbers incorrectly

    Previewing Pages (5.2) document in Preview (7.0) shows page numbers incorrectly. Regardless of starting page number preview shows as Page 1.
    Suggestions appreciated...

    That appears to be YABIP5 (Yet Another Bug In Pages 5].
    Pages .09 documents are fine.
    No prizes however for finding bugs in Pages 5/5.2 it's swarming with them.
    Peter

  • How to print page numbers in adobe form

    Hi,
    Can anybody tell me how to print page numbers in adobe form.
    Thanks in advance
    Chaitanya

    Hi,
    Yes the field page n of m is used normally for printing page numbers. But it won't display the current page of total pages by itself. You have to set the run time property to n (current page ) and m (Total number of pages). Carefully select the # (current page ) and ## (Total number of pages). Hope this works for you.
    My requirement is to have the user control on current page. For Example:
    Example for a Invoice with 5 PO items (stands on 2 pages) :
    1st  page is the letter : no page number
    2nd page is the 1st page of the 1st copy of the invoice : we should read u201C1 / 2u201D
    3rd page is the 2nd page of the 1st copy of the invoice : we should read u201C2 / 2u201D
    4th page is the 1st page of the 2nd copy of the invoice : we should read u201C1 / 2u201D
    5th page is the 2nd page of the 2nd copy of the invoice : we should read u201C2 / 2u201D
    Presently i cam getting the current page number for page 4th as 3 / 2 and for 5th page 4 / 2. I could able to control the total number of pages from print program. But when i am printing the second copy (4th and 5th pages), I couldn't able to control the current page number. I need to initialize the Current page count (4th page ) as 1.
    I have used the follwing java scripting:
    this.rawValue = wv_pages - xfa.layout.page(this)
    where wv_pages is total no of pages calculated from print program.
    Please help me in this regard with some formcal or java scripting conditions.
    Thank You,
    Regards,
    Naresh.

  • I need to start the page numbers over for a new section in a document (i.e. first six pages are roman numerals, next 70 need to be in arabic numerals), but for some reason, the automatic page numbering has started over at number 3 instead of 1. Help!!

    If anyone has any idea why it's doing this, or what I can do to fix it, please help!

    No idea why it's doing this.
    You should be able to fix it by using Insert > Page Number, rather than 'Automatic Page Numbering.'
    Set Page Numbers in your second section to "Start at:" 1
    Regards,
    Barry

  • Page numbering in rtf templates

    Hi All,
    I have an rtf template and what I want is to display page numbers. I can achieve this with the following : <?fo:page-number?> but I want to display it by different way:
    For example if the total pages in the output is 10 pages I want the page number to be displayed as Page 1 of 10, 2 of 10, 3 of 10 etc.
    Any ideas?
    Thanks in advance,
    Konska tor

    Well, it's fixed itself. It still doesn't work on my home computer, but it does work on my work computer... as long as it works in Oracle eBus I'm happy :) Must be a certain version of word that causes the problem.

Maybe you are looking for