PI adapter for MDM 7.1

Hi All,
Has anyone used PI adapter for MDM 7.1.
what is the transport protocol, the technical details that we need to mention in the PI adapter communication channel.
is there any blog/howto guide on usage of MDM PI adapter.
thanks,
Ganesh

Hi,
I was able to find some information on PI adapter with MDM 7.1
Streamlined Communication via PI Adapter:
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/604b3c0c-5b6c-2b10-cc83-a7af75c70eaf
/people/orit.prince/blog/2009/02/03/how-to-schedule-mdm-inbound-processes-with-pi-ccbpm
MDM 7.1 PI Adapter Guide:
https://websmp205.sap-ag.de/~sapidb/011000358700001890482008E
Hope this info helps.
Thanks and Regards
Nitin jain

Similar Messages

XI Adapter for MDM

Is it possible to use XI Adapter for MDM? I have three inbound Interfaces at the receiver MDM side. It was earlier configured as a single XI adapter for all the three?
Do we have to use single communication channel for one interface? is it correct to use three interfaces in one CC?
the interface is not working and it says " Error while receiving by HTTP (error code: 400, error text: ICM_HTTP_CONNECTION_FAILED)"
Radhika

Hi,
How come it is possible to connect MDM system using XI Adapter, because MDM doet not have ABAP Stack to support Proxy communication.
File Adapter/MDM-PI adapter will be used to conect MDM System as per my experience.
Regards,
Raj

Syndication event for new MDM PI Adapter in MDM 7.1

Hi,
We have setup the new MDM PI Adapter for MDM 7.1 and have created interface in PI using this new MDM PI adapter. All neccesary steps as mentioned in the installation guides are done.
Also all necessary remote systems/ports/syndication maps are created in MDM, and syndication is running fine on the MDM side (using the syndication server, so not manually!)! The syndication files are created in the Outbound/../Ready folder, so again, on MDM side everything looks OK.
However, when the syndication server has run, there's no syndication event triggered (or at least not captured by the MDM PI Adapter), hence PI is not picking up the files from the outbound folder. It looks like PI is not getting any syndication event, or at least is not catching the event, since monitoring on PI side does not show us any trigger.
Now I have the following questions:
1. Does anyone know how we can verify/monitor if MDM raises any syndication event (the export log in the console of MDM 7.1 does not say anything about an syndication event that is raised, only that the export itself was succesfull)?
2. Is there any additional setup to be done on MDM side in order to make sure that the syndication event is raised as soon as the syndication server is ready (or is the syndication server ALWAYS raising the event, independent of using the MDM PI adapter)?
If anyone else has any experience with the new MDM PI Adapter for MDM 7.1, please share us your valuable information. Thanks in advanve for your answers/advice.
p.s. We are using MDM 7.1 (build 7.1.01.72).
Regards,
Marcel

Hi
We are also currently experiencing a similair issue. Seems to occur when some sort of matching activity occurs on the MDM Server. What happens is that syndicated files remain in the 'Ready' folder on the Outbound Port. In the PI Netweaver Trace Log files we start seeing this error message:
Jul 13, 2009 4:34:41 PM com.sap.mdm.logging.MdmLogger warning
WARNING: NotificationDispatcher - Connection failure. Original exception: 'java.net.SocketException: Connection reset'.
If we restart the Connector and Adapter from the NetweaverJ2EE Application Admin screen, this files still remain in the READY Folder. However, if i syndicate another data record into that folder, the syndication for that file work as well as for the rest of the files that were sitting in the READY folder. Seems like the "failed" files seem to latch off the syndication event.
Doesn't seem like the stability and robustness is there?
Any feedback would be greatly appreciated.

XI Business content for MDM - Syntax error in IDOC adapter

Hi mates,
I'm trying out the Master Data Harmonization scenario for Vendor data with R/3 as the client system. I'm using SAP delivered XI Business content for MDM. The mapping program is generating ADRMAS and CREMAS IDocs but the IDOC adapter reports that there is a syntax error in ADRMAS IDOC. Find below the details.
<i><SAP:Category>XIAdapter</SAP:Category>
<SAP:Code area="IDOC_ADAPTER">ATTRIBUTE_IDOC_METADATA</SAP:Code>
<SAP:P1>Segment 'E1BPAD1VL', segmentnumber '000001' not correct in structure ADRMAS02</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Error: Segment 'E1BPAD1VL', segmentnumber '000001' not correct in structure ADRMAS02</SAP:Stack>
<SAP:Retry>M</SAP:Retry></i>
Generated ADRMAS IDOC is
<i> <?xml version="1.0" encoding="utf 8" ?>
<ADRMAS02>
<IDOC BEGIN="1">
<EDI_DC40 SEGMENT="1" />
<E1ADRMAS>
<OBJ_TYPE>LFA1</OBJ_TYPE>
<OBJ_ID>0000500140</OBJ_ID>
<CONTEXT>0001</CONTEXT>
<E1BPAD1VL SEGMENT="1">
<FROM_DATE>00010101</FROM_DATE>
<TO_DATE>99991231</TO_DATE>
<NAME>Swift Transportation</NAME>
<COUNTRY>US</COUNTRY>
<COUNTRYISO>US</COUNTRYISO>
<LANGU>E</LANGU>
<LANGU_ISO>EN</LANGU_ISO>
<SORT1>SWIFT TRANSPORTATION</SORT1>
<TIME_ZONE>CST</TIME_ZONE>
<E1BPAD1VL1 SEGMENT="1">
<LANGU_CR>E</LANGU_CR>
<LANGUCRISO>EN</LANGUCRISO>
<ADDR_GROUP>BP</ADDR_GROUP>
</E1BPAD1VL1>
</E1BPAD1VL>
</E1ADRMAS>
</IDOC>
</ADRMAS02></i>
Strangely, the control record is blank. I looked at the XSLT program, it is coded that way. I do not understand the reason. Is the error pointing to the control record?
Look at the code sample from XSLT mapping program
<xsl:for-each select="IDOC/*/E1ADRMAS">
     <IDOC BEGIN="1">
     
          <EDI_DC40 SEGMENT="1"/>
          <xsl:apply-templates select="."/>
     </IDOC>
</xsl:for-each>
How can an IDOC w/o control record be posted?
Did anyone come across this error? Whats wrong/missing?
I appreciate ur inputs.
thx in adv
praveen

Moorthy,
I tried reloading the IDOC metadata from IDX2. Still I get the same error.
Regd, IDOC w/o control record, can u elaborate on "dynamic value while posting IDOCs". From where, XI message SOAP header with Business System replaced by corresponding logical system names?
Thanks
Praveen

Link to download SCA file from service market place for MDM adapter

Hello All,
Can anybody give me the link to download the SCA file for MDM adapter from service market place.
Regards,
Loveena

https://websmp108.sap-ag.de/swdc -> search for all categories
use the search term MDM adapter and you will find the required Hits ...

How to import seeburger adapter and mdm adapter in sap pi 7.3

Hi all,
how to import seeburger adapter and mdm adapter in sap pi 7.3

Hello
To import the Seeburger adapters, follow the instructions in the Master Installation guide and the individual guides for each of the adapters. These are available with the Seeburger software downloads.
Regarding the MDM adapter, this is the wrong forum for that question. Try the MDM forum (but first, try searching the forum as this is a very basic question).
Regards
Mark

Wrong 'mini dvi to video' adapter for my 12" Powerbook 1.33

I recently bought the M9319 mini dvi - video adapter for my 12" Powerbook 1.33 to find that the mini dvi on the adapter is a different size to the one on the computer and the adapters supplied with the computer.
I've been doing a bit of research into this and it seems a bit of a grey area. Apple have not made it clear in advertising this product that it is only suitable for the newest 12" Powerbooks and even state that it will work with a 1.33 machine in their following article:
http://docs.info.apple.com/article.html?artnum=86507
Has anyone had a similar experience, or suggest an alternative product that will work? Did Apple make an older version that works with the 1.33?
Any help would be much appreciated. Thanks, Graeme.

Just took the adapter to my local Apple store and they identified it as a mini VGA to video adapter - not what it said on the packaging!
I've noticed a few posts with this problem, so just double check before you leave the store that the packaging matches the product.

HT1349 mini graphics to vga adapter for macbook how to install in windows 7.

mini graphics to vga adapter for macbook how to install in windows 7.
i have macbook with windows 7 operating system.

Can you be more specific?
What are you trying to do?

Apple dvi to video adapter for macpro working?

hallo,
is it possible to use the adapter for the geforce 7300 in the macpro for pal video output? will it work? the apple store lists the adapter only for g5 and mini, but i see no reason, why it shoud not work with the gforce...
any idea? thank you.
thomas
macpro Mac OS X (10.4.7)

I have wondered about that G5 support since others have had bad luck with Nvidia boards and the video adapter. e.g. it doesn't work with the 7800GT, which is a G5 board. All current ATI cards on their web-site show support for it but the MacPro card is not on ATI's site.
The adapter seems to have disappeared from the displays section of the Apple Store.
Another option is a VGA to video adapter
<http://www.ramelectronics.net/html/PC-TVvideoadapter.html>
It costs more, but does a lot more, and should work with any video card.

HT3153 Can the early 2006 MAC mini support a DVI to hdmi adapter for TV monitor support?

Can the early 2006 MAC Mini support a DVI to HDMI adapter for a TV Monitor?

Hi, I can't see why not...
Supports digital resolutions up to 1920x1200 and analog resolutions as high as 1920x1080.
http://www.everymac.com/systems/apple/mac_mini/specs/mac_mini_cd_1.66.html

How to update an existing item in a sharepoint list using the WSS adapter for Biztalk

Is there a way that a record in SP list be updated using WSS adapter in biztalk ?
BizTalk 2013 and SP 2013 ..
Regards
Ritu Raj
When you see answers and helpful posts,
please click Vote As Helpful, Propose As Answer, and/or Mark As Answer

A ListItem has its own unique row id so in all likelihood, an insert with the same data will result in a new list entry. The Lists Web Service however, has an UpdateListItem method which will take an update request. [refer
http://msdn.microsoft.com/en-us/library/office/websvclists.lists.updatelistitems(v=office.15).aspx ]
There is another note in the conference (marked answered) to your List Item Update problem. Probably worth a try too. [refer
http://social.msdn.microsoft.com/Forums/en-US/bee8f6c6-3259-4764-bafa-6689f5fd6ec9/how-to-update-an-existing-item-in-a-sharepoint-list-using-the-wss-adapter-for-biztalk?forum=biztalkgeneral ]
Regards.

Could I have got a new power adapter for free?

My power adapter for my mac stopped working recently and as far as I know I didn't cause any damage to it myself.
I read the following on the apple website:
Additional Information
Whether your product is in or out of warranty, you can take your adapter to an Apple Authorized Service Provider or Apple Retail Store for evaluation and replacement if necessary. Pending the results of evaluation, you may or may not be eligible for a replacement adapter free of charge. Signs of accidental damage would negate any coverage. Be sure to bring in the computer used with the adapter; it is required to process potential adapter replacements.
Which seems to suggest that even out of warrenty, if the charger has broken of it's own accord you can still get a free replacement?
I took my adapter and mac to the shop, they said there were no signs of accidental damage but said I still have to pay for it. I referred to this statement from the website but they were very dismissive and kept saying it was out of warrenty. Perhaps i'm reading the statement wrongly.
Just wondered if anyone could clarify :-)

As you indicated, it depends on the results of the evaluation.
Apple takes responsibility when design faults cause certain failures, especially when it represents a safety concern. There have been a small number of cases where failure met certain characteristics that Apple deemed that it should not have happened, regardless of age or use.
I am reluctant to indicated the specificity of some of these issues, because for many reasons Apple would not want us speculating on the subject. Suffice it to say your product failure may not have met any particular characteristics associated with failures deemed to have extended coverage.
If your product failed for an unknown reason, or apparently a failure stemming from age or normal life expectancy use, and it was after the normal expiry of warranty, then no further consideration was given. You need to buy and pay for a new one, unless you yourself, can provide extenuating circumstances to consider.

Preferred adapter for VGA? Mini DisplayPort to VGA or Mini-DVI to VGA?

Which is the preferred adapter for connecting a VGA-only LCD display to the new Mac mini?
The official Mac mini accessories page <http://www.apple.com/macmini/accessories.html> prominently features the Mini DisplayPort to VGA Adapter.
However, the Tech Specs knowledge base article <http://support.apple.com/kb/SP505> suggests the Mini-DVI to VGA Adapter.
I'm sure Mac OS X will work fine with either. But is one more likely to work better with Windows XP using Boot Camp?

I've come up with my own answer to my earlier question...
It's the Mini-DVI to VGA adapter.
I ended up trying both adapters, and got the results I described here: [http://discussions.apple.com/thread.jspa?messageID=9255959].
Besides the simple fact that the Mini-DVI to VGA adapter is the only adapter that fully worked for me, it's also cheaper.
Also, from a mechanical point of view, the nuts to secure a VGA cable to the DisplayPort version of the adapter are recessed into the end of the connector housing. This prevented my VGA cable from being able to be properly secured to the adapter--although this might be a defect with my cable!

VGA to Video adapter for a late 2004 iBOOK

I found a free TV and thought maybe i could use it as a larger screen format. so i went searching for cable adapters.
I did do a search here in the search query box on word search vga to video and results show related to clam shell versions.
while looking around the Apple web site for a VGA to Video adapter for a iBOOK G4 that shows a CPU speed of 1.2 GHz and a designation of PowerBook6, 5 yes that is how it is written in the System Profiler 'PowerBook6, 5'.
Using a tape measure the screen itself with out the plastic frame shows a width of 9.5 inches , including the plastic frame shows: 11 and one quarter, that could round off to 12 inch even though it is not at or beyond the point 5 mark.
The original paper work is some where ?.
I found a VGA adapter that could possibly work at
http://store.apple.com/us/product/M9109G/A?mco=MTY3ODQ5OTY#overview
yet the wording states: The video adapter cable plugs into the video output port (mini-VGA) built into the back of the computers listed in the compatibility section below.
Compatible with:
iBook without an external reset button, eMac, iMac G5, or 17-inch iMac (1GHz) with mini-VGA port.
does not say much for the laptop.
There is shown a VGA adapter for the iBook here:
http://support.apple.com/kb/HT2721?viewlocale=en_US
yet finding it at the store ???
if i copy the part number in a search query at the store the results show a Lexmark copy machine.
I found many DVI adapters at:
http://store.apple.com/us/product/M9319G/A?mco=MTY3ODQ5OTY#overview
And then here:
http://support.apple.com/kb/TA27124?viewlocale=en_US
as copied and pasted here:
The Apple Mini-DVI to S-Video/Composite Adapter does not work with PowerBook G4 (12-inch) computers,
the one thing i have notice is that no compatibility charts actually show support for the 1.2 GHz iBOOK G4.
I also see that there are Mini DVI to VGA adapters, Mini ?, does mention pin numbers ??.
I was wondering if i could crossover the DVI to VGA thru the adapters using VGA and DVI cables, yet pin numbers and compatibility questions still remain.
Suggestions ?
Thank you.

http://store.apple.com/us/product/M9109G/A?mco=MTY3ODQ5OTY#overview
The adapter in the above link is the one you need.
~Lyssa

DVI to ADC Adapter for GeForce 6800 video card?

Do I need DVI to ADC Adapter for Nvidia GeForce 6800 which I just installed on my G5 to be able to run ADC 23" Cinema off the GeForce 6800 card?
I want to run a new 30" Cinema and old ADC 23" Cinema from GeForce 6800. I ran the old 23" from the ATI Radeon 9600 Pro
Thanks,
Milan

Hi Milan,
If the Geforce 6800 does not have an ADC output, then yes, you do.
You need to check to see whether or not that the card has DVI-I output, as some of the DVI to ADC adaptors use a DVI-I plug which will not fit into a DVI-D output due to the extra pins in the plug.
Cheers!
Karl

PI adapter for MDM 7.1

Similar Messages

Maybe you are looking for