PI IDOC Message Type Correlation for Customers & Addresses

Hello
We are struggling with an interface from MDM through PI and into ECC.  For example, PI grabs customer/vendor records from MDM and then sends them on to ECC.  In the process it creates IDOCS of two different message types (ADRMAS u2013 addresses, and DEBMAS u2013 for customer/vendor records)
What is happening is that the Addresses and Customer/Vendor records are not being processed as logical units of work (LUW).  This is causing data synchronization issues in ECC where addresses are updated but customer master records are not.
We are in desperate need of having two different IDOCS (ADRMAS and CREMAS) having related records between them be treated as logical units of work so that the related records are updated together.  If one portion fails it all should fail. 
So far the team has not found good documentation on how to accomplish this in PI so that ECC can see that the IDOC records are related and to be treated as related LUWs. 
Any help or references would be appreciated.

hi,
>>Getting idoc errors in production is a regular occurence in any system including production due to trouble with the data (bad zip codes, bad foreign keys, failures due to data validation routines, configuration changes that impact data structures).
I know - that's when we can use WE02 and correct the wrong data
>>There is SAP documentation that suggests that correlations/relationships can be established between idocs in PI and ECC (serialization), but we just don't quite understand it yet, and we are not confident that it will do for us what we need.
no serialization will not do what you need as if the first one will be ok
and second one not - serialization will not rollback the second one - sorry
Regards,
Michal Krawczyk
http://mypigenie.com XI/PI FAQ

Similar Messages

  • Docu of Idoc message type CRMXIF_ORDER_SAVE_M02 for service request

    Hi,
    We are using the customer interaction center / service desk in CRM 7.0 and want to send service calls from other systems to our CRM service desk.
    I've found that this should be possible via IDOC CRMXIF_ORDER_SAVE_M02.
    Does someone has more documentation of this idoc message type (meaning of the fields, obligatory fields, ...) ?
    Thank you,
    Stefan

    Hi,
      Go to we19 t-code, there give messgae type CRMXIF_ORDER_SAVE_M and then execute.
    Next screein beside EEIDC double click and give send and receiver port.
    After that clcck CRMXIF_BUSTRANS popup will open. Fill required fields.
    Then expand CRMXIF_BUSTRANSA do the same for all.
    After that click start oubound processing.
    For more information go to SPRO->CRM->CRM middleware and related componets->exchange data with external components->XIF adapters then click OVERVIEW documentation help. Then click CRMXIF_ORDER_SAVE.
    You will get the information on outbond as well as inobound.
    Regards
    Srinu
    Edited by: sreenivasulareddy eragamreddy on Jul 10, 2009 7:45 PM

  • IDOC message type use for standard price ALE

    Hi,
    Does anyone know what is the best way to send material master standard price data from one SAP box to another SAP box?
    ex. SAP box A will send standard price data to SAP box B, and the way to update the standard price data in SAP box B, can be done with what method?
    I am thinking to use ALE, to send stanard price data and then trigger a MR21 transaction is the receiving box to update price. Does anyone know what IDOC message type I should use to transfer standard price data?  thx.

    Hi
    I think the IDOC type will MATMAS01.
    Thanks
    Deepak

  • What are the message types available for Vendor Address?

    Hi Everybody,
    I need to read the all the change pointers of Vendor Address using the function moudle 'CHANGE_POINTERS_READ'. To call this FM  I need to pass Address's Message Type. I am passing ADRMAS as message type. but i am not getting any records into change pointers internal table.
    Pls help me out by informing the message type of Vendor Address.
    Regards,
    Nagaraju Maddi

    Hi,
             The address group is in the segment E1BPAD1VL1-ADDR_GROUP.
    Check the table <b>TSAD7 for Address groups</b> (central address management)
    <b>Reward points</b>
    Regards

  • IDOC Message type suitable for VA32

    Hi,
    I am trying to investigate the automation of transaction VA32, "Change Schedule agreement ".
    Information relating to my updates from the customer are now available in an electronic format. I therefore wish to now automate this time consuming job using IDOC'S.
    I have a little ALE knowledge based on predefined models, but on the occasion I am struggling to find exactly the message type and fields to use.
    Can anyone help or point me in the right direction.
    Thanks
    Andrew

    Hi Andrew,
    There is an IDoc E1CUSTSCHEDULAGREEMENT_CONF
    The associated standard IDoc Input handling Function module is IDOC_INPUT_CUSTSCHEDULAGREEMEN.
    For more information and functionality, there is an associated Business Object BUS2035.
    Note that these are not set to 'released' status by SAP. But these should work for you.
    Thanks,
    Bhanu

  • Change pointer in IDOC message-type ARTMAS, for field MARA-LVORM

    Hi,
    When changing the description of a material in MM02 I am able to sent an idoc using BD21. As this relevant for a change pointer. But when field MARA-LVORM (deletion flag at client level) is chosen, I can not sent an idoc with bd21. How can I make this happen?
    thanks.

    Hi,
    Sorry I interpreted your question in wrong way. Solution I gave was for following requirement.
    Every time a material is created or changed a change pointer is created, which serves as a signal for generating IDocs to dependent systems. However, change of material type creates a change pointer that doesn't trigger an IDoc.The purpose is to create the change pointers and send the idocs. Eg. Material type field. As per your reply above I guess change pointer created for LVORM is enough to send the idocs.
    KR Jaideep,

  • Attribute extension generation to IDOC message type CRMXIF_IBASE_SAVE_M

    Various attributes have been defined and assigned to a set type using tcode COMM_ATTRSET.  The set type includes an entry in field CDB Table CDBD_ATTRVAL.  The Create API Append has been checked when including in a transport which generated the API append structure for the set type.  The set type has been assigned to a Category via tcode COMM_HIERARCHY.
    We are planning to use IDOC message type CRMXIF_IBASE_SAVE_M for the legacy data migration.  How do we include the new attributes?

    You have to use TCode BDFG  to generate a new Message Type . This will create a new Message type and a new Idoc type and will include the new Atributes.
    we have used to create a new Message type for our new fields in ACTIVITY_H ( extended through EEWB )
    Make sure , you refer to some OSS Note , which will tell you the steps to do so , As for first time user of BDFG  its very tricky.

  • IDOC Message type for open sales orders

    Hi
    We are trying to send the list of open sales orders of a customer in an IDOC to the customer. For example, if the customer has got 15 sales order to be delivered to him , he needs the details of all these 15 orders in an single IDOC
    Is there any message type available for this in SAP R/3 4.7 version
    Regards
    Anandh

    Try VA05 schedule lines standar variant...include status fields and both ordered qty and confirmed qty. In SAP standard system order status, status A means open orders fully (Nothing shipped, everything opened). Status B means in process orders (Partially processed - shipped). Status C means complete orders (Nothing opened). As there is no delivered qty in VA05,  you need to download to excel the file and calculate the difference between both qty fields for each A and B status. That is a way to get the missing qty to be delivered or open qty as you stated.
    Hope it helps.
    Jorge Fernandez

  • IDOC message type for "Site" in SAP Retail module?

    Hi All,
    We have the need to transfer master data (through master data change pointers) of Retail Sites within the SAP Retail module (transaction:  WB01, WB02).  Does anyone know if there's an IDOC message/type already associated with this?  Thanks in advance for your help!
    Cheers,
    Matt

    Hi,
    please read SAP notes 892103 and 551035.
    The correct IDOC type should be FIDCC1 / FIDCC2.
    Best regards,
    Andreas

  • Equivalent Idoc message type for EDIFACT BANSTA

    Hi Experts,
    I am trying to find out the equivalent IDOC message type for EDIFACT BANSTA. The purpose of the message is to show the item level statuses for a particular payment batch. There are lot of references about FINSTA01, however, this is for account level status response.
    If anybody know the equivalent idoc message type for EDIFACT BANSTA, kindly let me know.
    Thanks in advance.
    Regards,
    Ravi

    Thanks raja shekar. I posted this thread in ABAP development forum.

  • MB1B transfer posting Idoc/Message type for outbound and inbound

    Hello All
    Can anyone tell me the idoc/message type for movement type 313 outbound and 315 inbound to SAP. This is for MB1B Enter Transfer Positing.
    Thanks
    Ricky

    Its WMMBXY

  • Idoc Message type and Process Cosde for CJ01 transaction

    Hi,
    What is the Idoc message type and inbound Process code for CJ01 transdaction?
    Is there Any standard procedure to find out Idoc Mesage type and process codes for particular application?
    Thanks.

    Hi,
    All the sending and receiving programs(transaction) start with BD. e.g. if you want to send the material you can use the BD10 transaction and IDOC is available for the same.
    Go to se93 and search for BD* and look for the description.
    Regards,
    Nilesh.

  • IDOC Message type for EDI 947- 'Warehouse Inventory Adjustment Advice'

    Dear Guru's
    I am in a EDI-IDOC project for my Client. Where a customer is treating my client as 3rd party warehouse. we have a scenario where I wanted to Trigger OutBond EDI 947 (Warehouse Inventory Adjustment Advice) from MIGO/MB1A/MB1B and MB1C. Can any one tell me what is the Standard IDOC message type and Basic type i can use.
    You kind help on this will be great full to me.
    With Regards,
    M. Rajendran.

    Hi Sridhar,
    Thanks a lot for your reply. I need to try with the proposed message type. Hope it works fine.
    With Best Regards,
    M. Rajendran.

  • IDOC Message type for FB01 transaction.

    Hi,
    I am going to get a file which I will pass through PI (XI) and bring into IDOC and post into SAP ECC 6.0.
    I just wanted to know which IDOC message type / basic type I should use for posting an FI document i.e. FB01 transaction.
    Rgds

    Hi,
    please read SAP notes 892103 and 551035.
    The correct IDOC type should be FIDCC1 / FIDCC2.
    Best regards,
    Andreas

  • IDoc Message Type for VL09

    Hi,
          Is there an IDoc message type for VL09 (Reverse Goods Issue) for Delivery. Do let me know please.
          We are using an ECC 6.0 system (WebAS 700)
    Regards,
    Aditya

    Hi,
    You can use this message type MBGMCA, IDoc type MBGMCA01 and process code BAPI.
    This process code will call FM IDOC_INPUT_MBGMCA to  reverse good movements with MB_CANCEL_GOODS_MOVEMENT.
    Regards,
    Ferry Lianto

Maybe you are looking for

  • Mini-Dvi to Video compatability?

    I have a macbook intel core duo 2 i bought under a year ago. I was going to by a mini-dvi to video cable so i can use my television with it. On ebay there was a mini-dvi to video cable but the seller said he was selling it because it does not fit the

  • Galaxy Nexus issues (my story)

    I was having bad static and dropped calls on my Nexus. I called an received a replacement Nexus. My new Nexus was worse! The loud screech and static on 1 out of every 3 or 4 calls was excessive. I had to do a battery pull at least twice a week. My ne

  • Recovery Disc on New Harddrive not working

    I have a HP MS213 all in one desktop.  The original hard drive went bad so I went and got aother hardrive that is the same size.  I ordered the recovery disk from HP.  I load all the recovery disc and after disc 3 it says to remove all recovery disc

  • I undocked a panel while working on a project how can I get back to the original setting?

    I was trying different settings and can't get back to the original ones

  • Changing Frequency of individual photos in slideshow

    Is it possible? In iphoto it is (each photo can be displayed for a different amount of time) .... but it doesn't seem possible in idvd ... I would like to match photos to music ... so would like some photos to be up for 1 second, others 2 seconds, ot