PI Migration from AS/400 to Windows platform

Dear pals,
I've been assigned the task of migration of PI infrastructure of our organization,which is currently based on AS/400(IBM I-series). I've to migrate it to windows platform (Windows 2008 Ent.Edition,64-Bit). Please if someone could provide guidance over the matter.
Awaiting for your response !
Best regards,
SS

Hi Siddharth,
Post thread SAP Netweaver administration forum too u definelt wil get usefull replays and search in service market place.
Regards,
Raj

Similar Messages

ASM instance migration from non-asm in windows

hi,
i am looking for migration steps to asm from non-asm in windows platform. oracle version is 10.2.0.2.0 any metalink id's or Docs would be great.
i just had raw disk allocated in my windows but asmtoolg could not find the disk while configuring ?

had better post your question in ASM forum, you will get better guidance/reply there.
Forum Home » Grid Computing » Automatic Storage Management
Automatic Storage Management

Migrating from SBS 2011 to Windows Server 2012R2 Standard with 365

Im looking to move SBS 2011 to Server 2012R2 standard and with a 365 migration as well.
Im thinking
BPA for AD (health check)
Add the Server2012R2 as a DC
Ensure replication
Move DHCP
Change DNS
Now this is where I get lost, now Im lost to use either dirsync or add essentials service, I have gone for standard and 30 cals with the option as I have 28 users and the essentials service would make everything quite nice for remote access and backups
etc.... however I don't know whether to just use dirsync with password replication instead ?
Currently Im aiming towards getting the dc up and running then enabling essentials on the dc but I dont know how it will effect SBS and having essentials on the same network and sync'ing people to the cloud ? So Should I use DirSync on a different server
instead to sync up to azure ?
Finally with 365 I have only ever done a migration involving an export of pst's from an exchange box and then on a new domain with new pc's and reimport the pst's on the user accounts in outlook.
However I have read when migrating to 365 was using exchange 2010 there was a application
to move everything across however you needed an ssl cert iirc ? so I dont know how it works now since the nice new dashboard upgrade (assuming the tool has been updated like dirsync)
along with the above how does AD now know where exahcnge if you use the migration app with an ssl cert and is it a case of still running the 365 config tool to configure each user to look at their mail in the
cloud ? Also is it a good idea to enable essentials from the start of the 2012r2 dc for replication top 365 or to use dirsync ?
then finally when replications is all good start transferring the FSMO roles over to the new DC and demote and remove the SBS server
I have seen (below) but i dont think it covers this scenario and I cant be the only person in this situation =\ ?
http://blogs.technet.com/b/infratalks/archive/2012/09/07/transition-from-small-business-server-to-standard-windows-server.aspx
http://social.technet.microsoft.com/Forums/en-US/f552ef12-07a9-4f7a-bf5e-24500c3e1dc3/migrate-sbs-2011-to-server-2012-standard?forum=smallbusinessserver
http://social.technet.microsoft.com/Forums/en-US/e1d4b09f-8857-4ef6-9a80-6a906e76b688/how-to-migrate-sbs-2011-to-standard-2012-server?forum=smallbusinessserver

Hi,
Would you please let us know current situation of this issue? If any update, please feel free to let us know.
à
Currently Im aiming towards getting the dc up and running then enabling essentials on the dc but I dont know how it will effect SBS and having essentials on the same network
and sync'ing people to the cloud?
I’m a little confused with the description. Did you mean that set up DC (Windows Server 2012 Standard) and
then install the Windows Server Essentials Experience role? If so, when you migrate, please refer to the article:
Migrate from Previous Versions to Windows Server 2012 R2 Essentials or Windows Server Essentials Experience
Regarding to migrate Exchange to Office 365, please refer to following articles.
Migrate
All Mailboxes to the Cloud with a Cutover Exchange Migration
Step-By-Step:
Migrating from Exchange 2007 to Office 365
Please Note: Since the web site is not hosted by Microsoft, the link may change without notice. Microsoft
does not guarantee the accuracy of this information.
Meanwhile, there is an additional article that you can refer to:
Manage Office 365 in Windows Server Essentials. It may help us to understand Office 365 in Server Essentials clearly.
If anything I misunderstand, please don’t hesitate to let me know.
Hope this helps.
Best regards,
Justin Gu

Testing of SAP BW system after migration from OS Unix to windows

Hi Experts,
I am working on a project wherein testing of BW system is required after migration from OS Unix to Windows.
If any one has done same set of activities in past or has any idea of this, please share all major test steps required after migration.
Thanks in advance.
Regards,
Neeraj

Hi Neeraj,
I will paste the list we used for our upgrade from 3.1 to 7.0. I removed some company specific details. Sorry for the "lay-out", it is copied from excel, this messes up the whole message.
best regards, André.
Preparation     PHASE 1
Review New Functionality     Review BW section on SAPNet for latest information on new release
Confirm Upgrade Timing (First Sat)
GUI Upgrade     Install GUI's for Upgrade Test persons
"Check Prerequisites     -Operating System
-SAP Kernel
-DBMS
-Disk space
-R/3 plugin
-BW software version and SP
Citrix.."
"Check Compatibility Reqs with other systems     APO
ECC6.0"
Check Compatibility Reqs with 3rd party software     ?
"Test Team 2004s Delta Training     To
have idea on new functionality
not have confusion if looks different.."
"End User Communication: upgraded system and changes     e.g. right vs left click
- send out communication twice"
End User Communication: several "look and feel" sessions NOTE: incorporate WISBECH !!!
Setup Portal connected to BW QA for testing once upgraded     Setup Portal connected to BW DEV for testing once upgraded
Check best go live date - based on assuption 2 days needed
Determine test set - based on input BS / KU
Estimate resources Business for testing
BluePrint     PHASE 2
Check/CleanUp Development Objects     Check all open and not-released developments for release prior to upgrade
Prepare System Setup     Prepare (if needed) flat-files for test loads
Check OSS for release notes on objects     Each functional area should check out OSS for release notes on objects (for changes etcu2026, new functionality)
"Prepare (detail) list of objects to be tested     Complete list of objects to be tested, special attention to custom/non-standard programs, enhancements. List of:
- extractors
- process chains
- reports"
"Setup delta mechanisms (create transaction data)     BackEnd Test: Financial Extraction and load, process chains
u2022tbd
u2022
u2022 "
Verification / creation of process chains     Check existence of to-be-tested process chains; if none, create 'sample' process chains
Realization     PHASE 3
Prior to Upgrade: Install any necessary frontend software
Prior to Upgrade: Install any necessary frontend software (end-users)
Prior to Upgrade: Complete any extraction - suspend V3 and scheduled BW jobs
Create Sandbox
Connect Sandbox to external systems (connections/BDLS)
Pre-upgrade steps
Perform Upgrade of BW
Check connection with R/3/APO
Perform system backup
"BackEnd Test: Logistics extraction and load, process chains
u2022 Z_example_CHAIN
u2022 2lis_03_BF and 2lis_03_BX     Test:
- Extractor within process chain preferably otherwise mimic behavior (drop index, load, rebuild, aggragate etc)
- Delta extraction"
"BackEnd Test: Sales Extraction and load, process chains
u2022 Z_SALES_1
u2022 all lis extractors:
u2022 12_vcitm
u2022 13_vditm
u2022 11_vaitm
u2022 11_vahdr
u2022 11_v_ssl
u2022 11_vasti
u2022 12_vcscl
u2022 selection of z-extractors
     Test:
- Extractor within process chain preferably otherwise mimic behavior (drop index, load, rebuild, aggragate etc)
- Delta extraction"
"BackEnd Test: Financial Extraction and load, process chains
u2022 0FI_GL_4
u2022 NOTE: no further extractors are chosen for testing
u2022 tbd     Test:
- Extractor within process chain preferably otherwise mimic behavior (drop index, load, rebuild, aggragate etc)
- Delta extraction"
"BackEnd Test: Master Data... Extraction and load, process chains     Test:
- Extractor within process chain preferably otherwise mimic behavior (drop index, load, rebuild, aggragate etc)
- Delta extraction"
"BackEnd Test: Zxxx Extraction and load, process chains
u2022 Z_TRANSACTION_DATA
u2022 Zxxx
u2022 Zyyy     Test:
- Extractor within process chain preferably otherwise mimic behavior (drop index, load, rebuild, aggragate etc)
- Delta extraction"
"BackEnd Test: Plant Maintenance Extraction and load, process chains     Test:
- Extractor within process chain preferably otherwise mimic behavior (drop index, load, rebuild, aggragate etc)
- Delta extraction"
BackEnd Test: PP Extraction and load, process chains     Test: load from Zxxx
"BackEnd Test: Purchasing Extraction and load, process chains     Test:
- Extractor within process chain preferably otherwise mimic behavior (drop index, load, rebuild, aggragate etc)
- Delta extraction"
"BackEnd Test: APO Extraction and load, process chains
u2022 ZAPOxxx
u2022 ZAPOyyy
u2022 others can be tested, but were not included in de testset     Test:
- Extractor within process chain preferably otherwise mimic behavior (drop index, load, rebuild, aggragate etc)
- Delta extraction"
BackEnd Test: Regular Schedule - Production
BackEnd Test: Flat file upload     Test: 2 types from server and PC
BackEnd Test: Test Admin Workbench: creation of objects, change existing     Test the Admin Workbench: creation of infoobjects, change infoobject, create/change hierarchy, create cube,u2026
BackEnd Test: Test Bex: creation of queries (kf etc...); change existing     Creation of new query/ change query, create condition, calculated/restricted kf, variables,..
BackEnd Test: Issue handling
Development box issue fixing - on forehand     apply fixes based on issues BWQ
FrontEnd Test: Run Logistics Reports (log results in Reports tab)     Run reports, execute various navigation steps, make sure to execute each item of menu paths,validate no loss of functionality, report new functionality. Run few managed bookmarks
FrontEnd Test: Run Sales Reports (log results in Reports tab)     Run reports, execute various navigation steps, make sure to execute each item of menu paths,validate no loss of functionality, report new functionality. Run few managed bookmarks
FrontEnd Test: Run Supply Chain Reports (log results in Reports tab)     Run reports, execute various navigation steps, make sure to execute each item of menu paths,validate no loss of functionality, report new functionality. Run few managed bookmarks
FrontEnd Test: Run Financial Reports (log results in Reports tab)     Run reports, execute various navigation steps, make sure to execute each item of menu paths,validate no loss of functionality, report new functionality. Run few managed bookmarks
FrontEnd Test: Run Controling Reports     Run reports, execute various navigation steps, make sure to execute each item of menu paths,validate no loss of functionality, report new functionality. Run few managed bookmarks
FrontEnd Test: Run Master Data and Special Reports (log results in Reports tab)     Run reports, execute various navigation steps, make sure to execute each item of menu paths,validate no loss of functionality, report new functionality. Run few managed bookmarks
FrontEnd Test: Run PM Reports (log results in Reports tab)     Run reports, execute various navigation steps, make sure to execute each item of menu paths,validate no loss of functionality, report new functionality. Run few managed bookmarks
FrontEnd Test: Run Purchasing Reports (log results in Reports tab)     Run reports, execute various navigation steps, make sure to execute each item of menu paths,validate no loss of functionality, report new functionality. Run few managed bookmarks
FrontEnd Test: Run APO Reports (log results in Reports tab)     Run reports, execute various navigation steps, make sure to execute each item of menu paths,validate no loss of functionality, report new functionality. Run few managed bookmarks
FrontEnd Test: Issue handling
FrontEnd Test: Make before image of reports - Production     Run reports; save of before image to compare once upgraded
FrontEnd Test: Run All Reports - Production     Run reports, execute various navigation steps, compare with 'before image' taken in prevous step
Test Security     Test security with various end-user roles/IDS other than BW developer (usually has * ALL)
Test Portal integration     Test portal with various end-user roles/IDS other than BW developer (usually has * ALL)
Edited by: A. Nagelhout on Feb 12, 2010 10:50 AM
Edited by: A. Nagelhout on Feb 12, 2010 10:50 AM
Edited by: A. Nagelhout on Feb 12, 2010 10:52 AM
Edited by: A. Nagelhout on Feb 12, 2010 10:52 AM

Migration from AS/400 Platforms

Hello ev'ryone. We are interested about any experience on migrating from an AS/400 platform, to Oracle Technology.
Thanks.

Migrating AS/400 Applications to Oracle on UNIX and Windows NT using AX/ware
Is available in the technolgy ,Migration Toolkits area on OTN.
Turloch

SAP R/3 4.7 Migration from HP-UX to Windows

Hello Everyone,
I am doing migration of 4.7 system from HP -UX to windows.The export completed successfully but I am stuck during the import phase (Database upload(Post processing) .All the log files in sapinst directory shows the code page error as below.
>>>DbSl Trace: ORA-1403 when accessing table SAPUSER
(DB) INFO: connected to DB
(DB) INFO: DbSlControl(DBSL_CMD_NLS_CHARACTERSET_GET): WE8DEC
(CNV) ERROR: rscpMCInit rc = 2048
----2-
code: 2048 RSCPENOCONV
convert MDMP to Unicode during export only
module: rscpexmh location:    4 line:   460
TSL01: CQI p3: MDMP&->&1100&during export only&&
E:\usr\sap\DRP\SYS\exe\run/R3load.exe: job finished with 1 error(s)
E:\usr\sap\DRP\SYS\exe\run/R3load.exe: END OF LOG: 20110112183108
>>>
I had followed the step "System copy of MDMP systems" from Note
Note 970518 - Hom./Het.System Copy SAP NetWeaver 7.0 (2004s) SR2 ,,,but still it is failing at the same step and the Dialog.xml is overwritten with the original as it was before modifying.Not Sure where exactly the problem lies.Can someone please help.
Original :
<field sid="fiDBCodePage_i" highlight="false" enabled="true">
               <caption>DB code page</caption>
               <whatsthishelp>The DB code page or rather the code page used by the DbSl interface on the platform where R3load is run</whatsthishelp>
               <value maxlength="4" minlength="4" type="numeric">1100</value>
            </field>
            <field sid="fiNumberOfJobs_i" highlight="false" enabled="true">
               <caption>Number of parallel jobs</caption>
               <value maxlength="4" minlength="1" type="numeric">1</value>
Modified to before starting the import as per the above Note:
<field sid="fiDBCodePage_i" highlight="false" enabled="true">
               <caption>DB code page</caption>
               <whatsthishelp>The DB code page or rather the code page used by the DbSl interface on the platform where R3load is run</whatsthishelp>
               <value maxlength="4" minlength="4">1100</value>
            </field>
            <field sid="fiNumberOfJobs_i" highlight="false" enabled="true">
               <caption>Number of parallel jobs</caption>
               <value maxlength="4" minlength="1" >1</value>
Modified at two places in dialog.xml file, the SAP note doesn't mention "1100" in Dialog.xml as it currently shows in my Dailog.xml ,Not sure if I have to remove that too and start the import again from begening.
While export I had given "1100" as the code page and before starting import I modified the xml by removing the "Type numeric" and later during the import in selection field I couldn't enter the "MDMP" as it is allowing only numeric values.
Thanks
Edited by: Khaiser Khan Mohammed on Jan 15, 2011 7:10 AM
Edited by: Khaiser Khan Mohammed on Jan 15, 2011 7:58 AM

I already checked in SMLT tcode ,My system is MDMP .I passed that error and now I am getting this
DbSl Trace: ORA-1403 when accessing table SAPUSER
(DB) INFO: connected to DB
(DB) INFO: DbSlControl(DBSL_CMD_NLS_CHARACTERSET_GET): WE8DEC
(GSI) INFO: dbname   = "D3320110118070143                                                                                "
(GSI) INFO: vname    = "ORACLE                          "
(GSI) INFO: hostname = "SAPTST2K3E32                                                    "
(GSI) INFO: sysname = "Windows NT"
(GSI) INFO: nodename = "SAPTST2K3E32"
(GSI) INFO: release = "5.2"
(GSI) INFO: version = "3790 Service Pack 2"
(GSI) INFO: machine = "2x Intel 80686 (Mod 29 Step 1)"
(VK) ERROR: invalid migration key
E:\usr\sap\D33\SYS\exe\run/R3load.exe: job finished with 1 error(s)
E:\usr\sap\D33\SYS\exe\run/R3load.exe: END OF LOG: 20110118215221
any idea on this??

Db migration from Solaris 8i to windows 10g

There is requirement to move db from solaris8(dbversion8170 to window Server 2003 (10204 already installed)
DB is about 80gb big, what would be the best approach ?
I am thinking to create new db on windows, and export and import data.....any concerns/suggestion?
Source System
SQL> select * from v$version;
BANNER
Oracle8i Enterprise Edition Release 8.1.7.4.0 - 64bit Production
PL/SQL Release 8.1.7.4.0 - Production
CORE 8.1.7.0.0 Production
TNS for Solaris: Version 8.1.7.4.0 - Production
NLSRTL Version 3.4.1.0.0 - Production
Target System
SQL> select * from v$version;
BANNER
Oracle Database 10g Release 10.2.0.4.0 - Production
PL/SQL Release 10.2.0.4.0 - Production
CORE 10.2.0.4.0 Production
TNS for 32-bit Windows: Version 10.2.0.4.0 - Production
NLSRTL Version 10.2.0.4.0 - Production

what are other options i can try ?I only mention this approach because you asked. I wouldn't recommend it as a general strategy. exp/imp is the most straight-forward.
We are in the process of migrating from 9.2.0.6 to 11.1.0.7 (11.2 is not an approved standard yet in our enterprise), moving from Solaris to Linux, and consolidating two related instances into one.
We had to handle some unique situations due to our consolidation, so we did a lot of the steps manually that exp/imp does for you. A side benefit of this extra work is the actual down time is can be less than exp/imp itself, and avoids the need to dump all the data to disk and read it all again. We have about 500GB to migrate. It is a lot more work than a simple exp/imp, and is probably not be worth the effort for a single 80GB instance.
Our steps (oversimplified, there are more details than this) :
Set up the new instance and configure storage
Create users and roles in new DB
export structure only (using 9i exp)
import structure only (using 11g imp), without indexes or constraints
copy data (insert /*+APPEND*/ into.. select * from ... over a database link)
create indexes and constraints
Handling LONG data, materialized views, interdependencies between schemas each presented their own special circumstances I had to deal with.
The other path to get from 8i to 10g (mentioned only for academic reasons) is do a series of upgrades-in-place to get from 8i to 10.2.0.4 then use cross-platform transportable tablespaces to go from Solaris to Windows.

OS Migration from AS/400 to AIX

Hello,
We are doing OS Migration of our 4.5 server from As/400 to AIX 5...
I wanted to know whether it is possible to use method UNSORTED UNLOAD on AS/400 platform...
DB size is around 1 TB, so it would help a lot if we can do it through UNSORTED UNLOAD...
Can someone kindly confirm...
Thanks & Regards,
RaHuL's

Hello RaHuL's,
this setup is not really platform dependent ... it depends on the tables ... So, RFBLG is not an option e.g.
I do have in mind, that the exclusion is not automated on 4.5B - but I'm not sure right now.
If you know, which tables need to be exported with sort, you could go for it.
Regards
Volker Gueldenpfennig, consolut international ag
http://www.consolut.com http://www.4soi.de http://www.easymarketplace.de

Calling RPG program from SAP running on windows platform.

Hi
We want to call a RPG program used for sending and receiving data to SAP System. Our sap system running on windows platform and RPG program run iseries V5R3
How can we do this?
We red the redbook http://www.redbooks.ibm.com/redbooks/pdfs/sg244672.pdf. We thought it only mention about sap and externel system is as/400 and it is not related with our issue but we are not sure.
We are waiting for an urgent suggestion.
Best Regards...

Hi, We also need to call RPG from ABAP via RFC. We have installed the RFC SDK on A/S400 and tried call ABAP RFC from RPG, but still don't know how to make RPG program callable from ABAP
Any advice!
Many thanks
Tim

Migrate from db2/400 (V5R2) to Oracle

Greetings!
We are looking at helping a customer migrate their DB2/400 (V5R2M0) database to Oracle (planned for 10gR2).
I see there is a Migration Workbench offering for the lower revisions (v4r3) as well as for DB2/UDB, however nothing for V5R2M0.
There are over 1500 files (tables) to convert so we don't want to have to do a dump & load.
Any suggestions?
Thanks!!
Jim Kotan
Senior Data Management Architect
MSI System Integrators
http://www.msiinet.com
402-965-2556
Message was edited by:
Jim Kotan

Jim,
I work for a group in Oracle Server Technologies that focuses on legacy (mainframe and midrange) modernization. There are three options from Oracle:
1. Oracle Data Integrator (was Sunopsis) - This product is completely written in Java so it can even run on the iSeries/AS400. http://www.oracle.com/technology/products/oracle-data-integrator/index.html
2. Oracle ransparent Gateway for DB2/400 - Can execute qeuries directly against DB2 to migration the data. http://www.oracle.com/technology/products/gateways/tg4db2400.htm
3. OWB (Oracle Warehouse Builder) - This is an ETL offering from Oracle. Two options for moving the data FTP (and load the flat files) or if you have an ODBC driver on the iSeries can use this with OWB. http://www.oracle.com/technology/products/warehouse/index.html
Hope this helps. My team is hear to help with legacy modernizations so don't hestitate to contact me at [email protected]
Tom

Migration from Photoshop Elements 8 (Windows 7 64 bit) to PE 12 (MAC)

I am planning to move from a PC Windows 7-based system to a MAC. As part of this move I will need to migrate Photoshop Elements from PE 8 in Windows to PE 12 on MAC. Back in July, I previously asked what steps would be necessary to migrate to PE 11 on MAC, but I delayed making the move (waiting for the new MacBook Pro) and will now be migrating to PE 12.
Do I still follow the same steps for a (hopefully!) smooth transition of my tagged photos and catalog? i.e., migrate from PE 8 (Windows) to PE 12 (Windows). Then from PE 12 (Windows) to PE 12 (MAC). Are there any gotchas or caveats that I should be aware of? I've read a few horror stories in various places and am nervous.
Thanks, Amy

I'm a bit slow on implementation. So far I have good news and bad news. But bottom line, I need some additional help.
First the good news: The upgrade in Windows from PE 8 to PE 12 went smoothly, with all tags and their hierarchical structure maintained. Ditto for Albums which showed up under "Local Albums."
I am now stymied with the bad news and hoping for more guidance: I just got my new MacBook last week, with my data files transfered over from my Windows PC. Unfortunately, the migration to PE 12 MAC (installed for me with the disc from the boxed version) did not make the transition smoothly. All of my tags came in under "Imported Keyword Tags," with the hierarchical structure totally flattened, and they cannot be dragged-and-dropped into a renewed structure into People, Places, and Events tags, as appropriate. Also, all of my Albums have disappeared.
I'm thinking that maybe I should restore the catalog. But when I started to do so, I was asked to choose between New or Original Location. Then, when I chose "original location" (not wanting to clutter my new hard drive with duplicates), PE 12 gave me a warning about the potential for changes to the existing file structure. So I stopped and decided to come back to the Adobe Forum for more help.
Thanks in advance! Again! Amy

Migrating from PSE 5.0 Windows to PSE 6.0 Mac

I am trying to figure out how to migrate from PSE 5.0 for Windows to PSE 6.0 for Mac.
When I migrated from PSE4.0 to PSE5.0 (windows) I simply backed up and then restored the catalog.
I have backed up the catalog from PSE 5.0 but don't know how to import the info into PSE 6.0 for Mac. Being as there is no Organizer window in the Mac version I assume it is done via Bridge, but didn't see anything to restore a catalog.
Is it possible or do I just point Bridge at my photos and get it to create tags from the keywords embedded in the pics?
All suggestions and hints welcome.

As not many users here are familiar with Elements at all, I suggest you post in one of the Photoshop
Elements
forums down the hall.
http://www.adobeforums.com/webx/.eeb4f8b/

Migrate from aix 5 to windows

is it possible to migrate 11.5.10.2 from aix 5 to windows server 2003, if so can you provide a document id or good help
thnx

Please refer to:
migration erp system aix to windows
Re: migration erp system aix to windows

Migrate FROM mail.app TO windows (thunderbird or outlook)

I'm moving back to a windows machine after using a mac (quite happily) for about a year. Please do not comment on my decision; that is not the point of this post, nor is it my wish to filter out all the criticism I will most likely receive.
What I need to do is export my considerably large Mail library (4 accounts and years worth of archived emails) from Mail.app to an XP-compatible format. I don't yet know which email program I'll use on the PC, but I can do either Thunderbird or Outlook. or something else, if there's a better one. I'll buy a shareware migration program, if that's the best idea. I can also migrate to Thunderbird on my mac first, and then from there to the windows machine.
thanks in advance, and I again request that replies stay on-topic.

for mail are your accounts imap? if so, then you just need to create the imap account(s) in either thunderbird or outlook and you should be in business. if you do not have an imap account, may i suggest you get one - gmail imap is free for example - then create it in mail.app, then move your emails/mailboxes to that new gmail imap account, then go to your pc and create that gmail imap account in either thunderbird or outlook...
for ab, may i suggest you look at plaxo: http://www.plaxo.com, and maybe set up an account with them - i think the basic one is free - once all your contacts are uploaded to plaxo, you can choose to sync them to your other client, i.e. outlook for example.
hope this helps

Chnaging logical file path - Migrated from As/400 to wintel

Hi,
How do i change the default file path of logical file .
I need to change path of a logical file in MI34 tcode from C:\usr\sap\DEV\SYS\global to out new Virtually created directory.
Recetly We moved from OS/400 to WINTEL environment
I wenin to FILE transaction but still it it looking at
C:\usr\sap\DEV\SYS\global??? How do i over write it?
Regards
Prasad

Hi Vara,
to change the default logical file path , you need to change in Program. since this is standard program, you need to copy into 'Z' program and change. This is one option.
Better to do is, change the physical path of the Logical file path in FILE transaction. may be this will work.
All the Best.

PI Migration from AS/400 to Windows platform

Similar Messages

Maybe you are looking for