PIAFUSER gets locked & SLD Data Supplier won't start

Hi guys,
well i am no basis guy but i have to do the following.
We want to use one SLD for PROD & DEV. We chose DEV SLD to be the one!
Therefore i followed Note 720717 in detailed way.
Because there is mentioned i have to change sth. in Service SLD Data Supplier i did so in PROD for giving the SLD-Adress of DEV. This was looking good, i changed, saved and restarted service.
But since then for changing back the settings for this service, the service won't come up. I can stop it but never restart it.
In addition our DEV is also not working anymore, here the User PIAFUSER gets locked all the time on DEV (ERROR 401). We have no clue why this is because we never touched a service with this user since this seems to be an authorisation problem!
Could someone help?! We already read post and blogs the last 4 hours but nothing helped that far!
br

Hi ,
Well this is due to password mismatch.
What u can do is , reset u r password of the user or if u want to use the same pass just login with the user in sapgui.
Now in SLD Exchange profiles try to put again the same password what logged in sucessfuly.
it"s clearly a password mismatch , system is trying to log in and after certain attempts it gets locked
rwd points if useful
rgds
srini

Similar Messages

  • SLD Data Supplier User is locked at regular intervals

    Dear Sirs,
    I have a Webdynpro application using two JCO connections to the backend to fetch data. One day it just stopped working. After some searching I found out that my SLD Data Supplier user was locked in the UME, due to too many failed logins. 
    When I unlocked this user everything worked again. Next morning when trying the application, the SLD Data supplier user was once more locked. If I lock it up it works, but it stops working again at fairly regular intervall (due to too many failed logins).
    The time it stops seems to be 15 minutes over each hour; however sometimes it seems to work for more than an hour some times less. This makes me belive that there is some kind of regular job which mess it up.
    Below is an extraction on what is going on in the logs around the time it stops working.
    I know others have had these kinds of error messages in conjunction with XI, but did not find a solution of the forum with fits me.
    Any hint on how I can solve the problem, or find out why the user gets locked is appriciated :=)
    java.lang.reflect.InvocationTargetException
    com.sap.engine.services.rfcengine.DefaultRequestHandler.handleRequest(JCO.Function function) anonimus J2EE_GUEST host.domain.com Server 0 XX_XXXXX
      Error 13:15:02:775 /System/Server 08/01/2006 java.lang.reflect.InvocationTargetException
    com.sap.engine.services.rfcengine anonimus J2EE_GUEST host.domain.com Server 0 XX_XXXXX
      Error 13:15:02:775 /System/Server 08/01/2006 java.lang.reflect.InvocationTargetException
    com.sap.engine.services.rfcengine anonimus J2EE_GUEST host.domain.com Server 0 XX_XXXXX
      Error 13:15:02:774 n/a 08/01/2006 Thrown: om.sap.mw.jco.JCO$J2EEAbapException: (126) SLD_CLIENT_EXCEPTION: AbapSLDRequestHandler.ping(): server connection *** failed *** on Tue Aug 01 13:15:02 CEST 2006 at com.sap.lcrabapapi.util.AbapSLDRequestHandler.raiseAbapException(AbapSLDRequestHandler.java:4184)... [see details]
    com.sap.lcrabapapi.ejb.AbapSLDRequestBean sap.com/com.sap.lcrabapapi J2EE_GUEST host.domain.com Server 0 XX_XXXXX
      Error 13:15:02:771 /Applications/SLD 08/01/2006 Caught a JCO.J2EEAbapException while processing a JCO request. Check the RFC engine for sanity and check your server logs and traces for more information.
    com.sap.lcrabapapi.ejb.AbapSLDRequestBean sap.com/com.sap.lcrabapapi J2EE_GUEST host.domain.com Server 0 XX_XXXXX
      Error 13:15:02:771 /Applications/SLD 08/01/2006 Caught a JCO.J2EEAbapException while processing a JCO request. Check the RFC engine for sanity and check your server logs and traces for more information.
    com.sap.lcrabapapi.ejb.AbapSLDRequestBean sap.com/com.sap.lcrabapapi J2EE_GUEST host.domain.com Server 0 XX_XXXXX
      Error 13:15:02:767 /System/Server 08/01/2006 User J2EE_GUEST, IP address
    Error processing an HTTP request. Http error [401] will be returned. The error is [Access Denied.No details available].
    com.sap.engine.services.httpserver n/a J2EE_GUEST host.domain.cp, Server 0 XX_XXXXX
      Error 13:15:02:742 /System/Server 08/01/2006 User J2EE_GUEST, IP address

    Hi Jørgen,
    This problem must be due to the user being entered with an incorrect password in one of your systems which accesses XI. I'm afraid the only way to find it is to go through all your systems' RFC destinations, transaction SLDAPICUST, and anywhere else the user info might be entered.
    I would normally recommend creating a separate user for each system accessing XI, so that in cases like this it is far easier to narrow down the search.
    Regards,
    Thorsten

  • SLDDSUSER authentication failed in SLD Data Supplier

    Dear SAP gurus,
    Here i am facing a problem  in EP production system.
    SLDDSUSER  id is locked out frequently.
    In visual admin tool,SLD datasupplier ,the http connection for SLD clients test  is failing.
    i am getting the error " Failed to generate and test CIMOMclient object".
    After i reset the password of SLDDSUSER in portal still i am facing the same issue.
    For availability of system i replaced Administrator user id instead of SLDDSUSER.
    Because of this problem portal users are facing issues frequently.
    Please guide me ASAP .
    Thanks & Regards
      Kumar.

    Hi,
    Can you please confirm me is your system is refreshed with PRD data?
    If yes,You need to change the users password accordinglly.
    If not,Change the SLDDSUSER user password and change in SLD Data Supplier on both tabs HTTP Settings and CIM Client Generation Settings and check whether the CIMClient Test .
    Also make sure this user id is used in any of the RFC destinations?If yes,Please change the new password.
    If you still facing the issue you can use J2EE_ADMIN user instead of SLDDSUSER.
    I hope it will help you.
    Regards,
    Kiran .V

  • Error while testing the CIMClient Test in SLD Data Supplier

    Hi Experts,
    I am setting my SLD Data Supplier in Visual Administrator. I had filled the host/port/user/password information for both "HTTP Settings" and "CIM Client Generation Settings". Now, when i click on the "CIMClient Test" button, its getting and error message saying "Failed to Generate and Test CIMOMClient Object".
    I have full authorization to use admin tools.
    What might be the problem.
    any help must be appreciated.
    regards
    sunil kumar

    Sunil,
    1. Try to restart the SLD Data Supplier Service in Visual Administrator.
    2. Check your input for testing CIMClient.
    Hostname should be fully qualified domain name.
    And cross verify the Port number properly.
    Regards,
    Karthick Eswaran

  • PI 7.1 - SLD Data Supplier issues

    I am getting an error while clicking on "Collect and send data' in the SLD Data Supplier service in the NWA. The error is as follows: 
    http://<hostname>:<java port>/sld/ds, Status: 403, Message: Forbidden
    I looked at all the places that I could think of. Any suggestions?
    SLDCHECK works fine.
    All the SM59 destinations work fine.
    All the destinations in NWA for the Data supplier (SLD_DATASUPPLIER and SLD_CLIENT) work fine.
    I am able to do the development in ES Builder fine. But, when it comes to the adapters, I am unable to see any of my adapters as my cache refreshes are failing. I started debugging this issue and stumbled upon the error in the SLD data supplier.
    Thanks
    Sridhar

    Hi,
    Please apply note:
    #999962 - PI 7.10: Change passwords of PI service users
    Regards,
    Caio Cagnani

  • Problem changing sld data supplier slddsuser to new userid in VA

    We are experiencing lockouts with slddsuser in the SLD so I planned to change all fo the userid's under sld data suppliers to a unique userid for each client.  I created a copy of user slddsuser in solution manager and made sure in the UME the new userid's had all of the same security.  When I change the userid in sld data supplier in the J2EE the HTTP fails with a 403 http error.  The CIM test also fails.  The message says to verify the gateway and that the sld service is running which they are since I can change the userid back to slddsuser and everything works fine.  What am I missing for security on the SLD side the new users are exactly the same as the slddsuser that works find??

    Hi
    One reason why no other user will work is because you would likely have to create any new users for each data supplier in the target SLDs UME
    Actually I noticed in another thread a useful suggestion - its possible one of the data suppliers reflects the wrong password
    or an old password for SLDDSUSER this could be causing the lock - unfortunately there is no easy way to identify this
    - perhaps you could check the SLD logs (now and in future) and/or increase the trace level to diagnose
    Best wishes
    Stuart

  • Visual Admin - SLD Data Supplier - CIM Client Generation Settings Failing

    I am in VA -> cluster -> server -. services -> SLD data Supplier -> CIM Client Generation Settings.
    I am trying to save and I get the following error - "Failed to set permissions for domains"  I am using administrator for the id so I can eliminate permissions as a cause.  If I click on CIMClient test, it comes back successful.
    Any ideas?

    Hi Jason,
    Looks like the permission issue.
    Create a role called "Lcr administrator" and assign permission
    "Lcr administrator", "LCR write access" and "LCR read access"
    Then assigm "LCR administrator" to "Administrator" User.
    After that try doing CIM client settings again.
    Regards
    Usha

  • SLD Data Supplier Collected information incomplete.

    Dear All
    My technical system is EP7.0 and SLD based on SOLMAN (EhP1).
    I am getting error while trying to access SLD Data Supplier on
    VA 'Server -> Services -> SLD Data Supplier'.
    SLD_Collector_Task
    2009.12.09@17:49:45: Data collection process started.
    2009.12.09@17:49:45: Created list of data collecting classes.
    2009.12.09@17:49:45: Processing class:
    com.sap.sldserv.data.GetDatabaseSystem
    2009.12.09@17:49:45: Processing class:
    com.sap.sldserv.data.GetInstalledSoftwareComponent
    2009.12.09@17:49:45: Processing class:
    com.sap.sldserv.data.GetJ2EEEngineCluster
    2009.12.09@17:49:45: Processing class:
    com.sap.sldserv.data.GetJ2EEEngineInstance
    2009.12.09@17:49:45: Processing class:
    com.sap.sldserv.data.GetJavaDebugPort
    2009.12.09@17:49:45: Processing class:
    com.sap.sldserv.data.GetSAPBCCentralServiceInstance
    2009.12.09@17:49:45: Processing class:
    com.sap.sldserv.data.GetSAPComputerSystem
    2009.12.09@17:49:45: Processing class:
    com.sap.sldserv.data.GetSAPIPServicePort
    2009.12.09@17:49:45: Processing class:
    com.sap.sldserv.data.GetSAPJ2EEDeployedObject
    2009.12.09@17:49:46: Processing class:
    com.sap.sldserv.data.GetSAPJ2EEEngineClusterNode
    2009.12.09@17:49:46: Collected information incomplete. Please check
    trace file.
    2009.12.09@17:49:46: Sending data via HTTP.
    2009.12.09@17:49:47: Data has been sent successfully. You can check
    correct data processing in the target SLD.
    2009.12.09@17:49:47: Collecting process ended.
    So I guess that full system data didnu2019t send to SLD therefor system
    number and install number didnu2019t exist in SMSY.
    Thanks & Best Regards.

    I can't  find message about SLD in default trace file.
    But I found below messages in dev_jrfc.trc.
    16.12.2009 15:30:50.384 ALL      Error> occured  >Wed Dec 16 14:10:16,880<
    16.12.2009 15:30:50.384 ALL      RfcException:
    16.12.2009 15:30:50.384 ALL          message: Parameter gateway service ('gwserv') needs to be of format #### or sapgw## (# is a di
    git)
    16.12.2009 15:30:50.384 ALL      Connection parameters: TPNAME=SLD_NUC GWHOST=localhost GWSERV=sapgw
    16.12.2009 15:30:50.384 ALL          Return code: RFC_INVALID_PARAMETER(19)
    16.12.2009 15:30:50.384 ALL          error group: 101
    16.12.2009 15:30:50.384 ALL          key: RFC_ERROR_PROGRAM
    16.12.2009 15:30:50.384 ALL            at com.sap.mw.rfc.api.RfcRegisterInfo.checkParameters(RfcRegisterInfo.java:114)
    16.12.2009 15:30:50.384 ALL            at com.sap.mw.rfc.api.RfcApi.RfcAccept(RfcApi.java:651)
    16.12.2009 15:30:50.384 ALL            at com.sap.mw.jco.MiddlewareJRfc$Server.accept(MiddlewareJRfc.java:1563)
    16.12.2009 15:30:50.384 ALL            at com.sap.mw.jco.JCO$Server.accept(JCO.java:7989)
    16.12.2009 15:30:50.384 ALL            at com.sap.mw.jco.RequestListenerGroup.openConnection(RequestListenerGroup.java:531)
    16.12.2009 15:30:50.384 ALL            at com.sap.mw.jco.RequestListenerGroup.adjustConnectionCount(RequestListenerGroup.java:424)

  • SLD Data supplier Error

    Hai Experts
           Yesterday I got one error message from JDI configuration time. The Error was "Sld (http://otisap03:50200) server exception. User credential are invalid and user is denied access." Then now i open Visual administrator>services->SLD data supplier. I click the SLD DATA Supplier. Error in SLD DATA Supplier in
    "Operation failed failed to collect data. Software caused connection abort:socket write error"
    Can u help me!
    Malar.

    Hi Malar,
    Apart from the link suggested by Barry please visit this link as well:
    http://help.sap.com/saphelp_nw04/helpdata/en/c9/dc37520bdf4b48bb8f6d4329f073d5/frameset.htm
    Further just check if te user id credentials you are inputting in SLD data supplier bridge configuration are valid. Check if the user id is not locked. Further check if the password is valid and finally if he has all SLD relevant authorizations.
    If I rememeber you had posted a thread for a similar issue recently.
    Please award points for useful info.
    Regards.
    Ruchit.
    Message was edited by: Ruchit Khushu

  • SLD data supplier returning False

    Dear All,
      I am having a Scenario where I have to migrate the developments that are there in the DEV server to the PRD server. On doing a <b>full export</b> of the SLD Data contents to the PRD server the SLD Data Supplier is showing Flase and the Error that is showing is given below.
    <b>Can't store new target Error during write access to secure store (caused by: com.sap.security.core.server.securestorage.exception.ObjectStorageException)</b>
    Please advice me what can be wrong in this. I don't have a clue to make it <b>TRUE</b>. On clicking it TRUE it is returining FALSE.
    Thanks in anticipation for the help. Please revert back ASAP.
    Thanks and Best Regards
    Chakra and Somnath

    Hi Somnath,
        Check the details of ObjectStorageException, you may get some idea:
    <a href="https://media.sdn.sap.com/javadocs/NW04/SPS15/en/com/sap/security/core/server/securestorage/exception/ObjectStorageException.html">https://media.sdn.sap.com/javadocs/NW04/SPS15/en/com/sap/security/core/server/securestorage/exception/ObjectStorageException.html</a>
    Regards,
    Subhasha Ranjan

  • SLD Data Supplier Issue

    Hi Friends,
        I have problems configuring data supplier bridge. I logged into the SLD with admin user. I went to Administration -> Data Supplier.
    I dont get to see the fields for entering Host, gateway etc required for RFC. I just have an option where i can select true/false for sld/active and there is a button to add SLD. Nothing else.
    I dont see an option to start or stop the SLD Data Supplier Bridge.
    I followed a document to configure ESS. The document asks me to open the Visual Administrator and follow Cluster->Server->Services->SLD Data Supplier. It is required that i have to enter the Gateway Host and Gateway Service/Port in the RFC Settings tab. Strangely I couldnt find any such tab in this path.
    What could be wrong? We have the latest patch level installed.
    ECC 6.0
    EP 7.0
    SAP NW2004s..
    Thanks in advance.
    Regards,
    Nathan.

    Hi,
      Thanks. How about Visual Administrator? What is the most recent version of ESS and MSS?
    Regards,
    Nathan.

  • Error while loading service SLD Data Supplier

    HI All,
    I am getting an error when i am trying to access the SLD Data Supplier via Visual Administrator.
    Error while loading service SLD Data Supplier
    java.lang.ClassNotFoundException: com.sap.sldserv.vaclient.ClientManagement
    Can somebody tell me how to fix this?
    Regards
    Prakash

    Hi Nigel,
    thanks a lot - I can now access the SLD data supplier from my local visual admin- great!
    unfortunately, the key storage service still throws the error:
    java.lang.NoClassDefFoundError: iaik/x509/V3Extension
            at com.sap.engine.services.keystore.admin.gui.KeystoreContentPanel.<init>(KeystoreContentPanel.java:34)
            at com.sap.engine.services.keystore.admin.gui.SingleKeystoreViewPanel.<init>(SingleKeystoreViewPanel.java:31)....
    Do you know if it's something different with the key storage?
    Best regards
    Cornelia

  • Cannot load required classes for service SLD Data supplier

    Hello Experts,
             I am trying to use the SLD Data supplier service from visual administartor for registering my DEV EP 7.0 engine in central SLD.When am trying to access that particular service from visual admin,it is throwing an error saying that:"Cannot load required classes for SLD Data Supplier service and please refer the not for resolution Note No:1017526.
    My NW EP 7.0 is at SP17 level and as per the above note all settings are fine and the relevant application is also started well.
    Please suggest us for any possible solution.
    Thanks&Regards,
    Apparao S.

    > You can also try the following: Move sldserv.jar from
    > /usr/sap/<SID>/<InstID>/j2ee/cluster/server0/bin/services/sld/
    > to
    > /usr/sap/<SID>/<InstID>/j2ee/admin/lib/
    Hi Desiree,
    Thanks, worked for me too.
    Only in my case, when I moved the file, the sld data provider service did not start at all after reboot of the instance.
    Also, the sap.com/tcsldwd~main application refused to start.
    I then copied the file back, this time maintaining an entry in both locations and reboot the instance. Everything started working after I reboot the instance. The error also disappeared and I was able to change the SLDuser password.
    Thanks
    Prasad

  • SLD Data Supplier

    Hello Experts,
    Can you please clarify below queries regarding SLD Data supplier.
      in Visual admin>server>services-->SLD data supplier
    1.How to reterive Http settings(host,port,username,password) and CIM client generation settings((host,port,username,password)) through Java programs?is there any specific JAVA API is there?
    2.Http settings,CIM client generation settings where it will stored? shall i see in http://<hostname:port>/SLD
    Regards,
    Manivannan P

    Hi Manivannan,
    Please check the [System Landscape Directory Process and JCo Configuration|http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/c0c1d495-048e-2b10-babd-924a136f56b5?quicklink=index&overridelayout=true]
    Best Regards
    Arun Jaiswal

  • SLD Data Supplier Configuration

    Dear All,
    I got a question and I think it is related to SLD Data Supplier Configuration.
    I installed NW2004s SP05 Java stack and I try to access the administration page "http://host:50100/nwa", then select "System" -> "Administration", and "User and Access" on left pane under "Detailed Navigation", then I got the error message "Cannot connect to system ABC on hostname; system is not correctly registered with SLD; no central service instance found ".
    Anyone know what's wrong with it?
    Thanks,
    Kelvin

    Hi Kelvin,
    I think the system ABC should register at SLD. Depending on the type of system this is either done in
    - Transaction RZ70 for ABAP systems or in
    - Visual admin for J2EE systems (service sld data supplier)
    Regards
    Helmut

Maybe you are looking for