Picking files from portal to sap & placing the files to portal back

hi SDN,
we have a requirement to read a file from the portal to SAP R/3, do some process on the file and place it back to the portal again.
can you please let us know how to achieve it.
Thanks,
Suman.

Hi,
i am not sure if this link helps.
http://help.sap.com/saphelp_nw04/helpdata/en/2b/d920a34b8a11d1894c0000e8323c4f/frameset.htm
ideally if you are able establish http connection to portal then you can down load /uplaod files otherwise look at options in PI if available.
Suresh

Similar Messages

The printing of .pdf file from Project 2013 stops when the file name should be written. Project 2013 crashes. Does someone know what is wrong between Project 2013 and Adobe Acrobat 9?

The printing of .pdf file from Project 2013 stops when the file name should be written. Project 2013 crashes. Does someone know what is wrong between Project 2013 and Adobe Acrobat 9?

The Acrobat 9.x product family passed into "End of Support" mid-year of 2013.
Acrobat 9 support of MS Project via PDFMaker stops with Office 2007.
For Office 2013 support you must use Acrobat XI (11.0.1) or newer.
A good to have reference:
https://helpx.adobe.com/acrobat/kb/compatible-web-browsers-pdfmaker-applications.html
Acrobat Pro and Standard DC are what are currently available for purchase.
Be well...

I somehow changed a video in my imovie to zero fps, so it just plays black. The video still exists on my desktop but even when I delete the files from imovie and reimport them the file is still in zero fps and play black.

somehow changed a video in my imovie to zero fps, so it just plays black. The video still exists on my desktop but even when I delete the files from imovie and reimport them the file is still in zero fps and play black.

I'm not sure of your question.
Are you asking how to use Photoshop?
Or are you asking for the dimensions of video iMovie uses?
It edits in 720P HD, which is 1280x720.
You can make it a bit bigger so you can zoom in.
Much bigger then this is a waste of time.

Can't open files from an application by dragging the file from another window

In Mac os x 10.6, i was able to to open a file by simply dragging it and placing it on the 'open' Window which automatically changes the location to where the dragged file is. Ever since updating to Lion, i'd have to go folder by folder from the 'Open' window until i get to where the file is and selecting it.
i

I tried it with so many applications Like When i'm sending a file via bluetooth, i tried opening a file with iTunes too by dragging to see if it'll work, it didn't. I tried uploading a Photo to facebook too by dragging it to the select photo window, it didn't work.

Saving a flash file from cs3 to cs4 ruins the file!

Last time I used flash for an urgent commission I discovered a very heavy bug, which did cost me half a day of work and nearly the whole commission. What happened:
I saved a flash file originally created with Flash CS4 as CS3 because the Actionscript programmer did not have a newer version. When I reopened the changed file and typed CMD+S it saved the file without warning. This was momentous: when I re-opened the file, only the library contents did show up, the timeline and stage was empty. Trying to publish the movie again resulted in a program crash. Thus I had to rebuilt the whole flashfile from scratch the next day and calm down a very nervous (and important) customer. Since then I always chose "Save as" and change the format to "CS3", and – how about that! – the file stays intact.
So HOW can a software have a glitch like this be on the market? I would suggest to Adobe that the rework the whole code because flash seems to be very poorly coded. I experienced numerous minor bugs in the last years, but this one beats them all. You save a file and ruin it.
If anybody else has experienced this, I would like them to share their experiences. Not just with me – share them with the people responsible for this. Write to Adobe.
kind regards,
tomasio

Just save. It'll open in previous versions.
BUT if you used features that are specific to CS6 (like vector strokes) those may not show up in previous versions.
If you want everything to show, flatten the image and save a copy.
If you want to show the structure of the file - avoid features that are new in CS6 and save as PSD..

When I export a AAF file from Protools 9 and Import the file into Logic ProX the drum track is out of sync. I created the drum loop using NI Maschine. Has anyone else seem this??

When I export an AAF file/project from Protools 9 using an external drive and import the AAF into Logice Pro X the drum track does not play correctly. It is out of sync with the rest of the track. I created the drum loop as a plugin using Native Instruments Maschine. Has anyone else had this problem?? Also how would I go about exporting the midi tracks from the Protools session. The midi track does not show when the file is imported to Logic Pro X. The midi data should export with the AAF file correct??

Are you using any plugins in Logic?
In Preferences/Audio under the General tab, how do you have the plug-in-latency compensation set?

When downloading a file from a website, I get the file but it is totally black and never fully opens up. I can see page numbers to advance See screen shot

Same as question. On two different URL sites, the download PDF comes up black. I would include the screen shot of the black pdf, but I do not see where I can add this to my question

Firefox's built-in PDF viewer is not yet as full-featured as Adobe's plugin. You might need to use Adobe for that one. Here's how to make the switch: [[How to disable the built-in PDF viewer and use another viewer]].
Any luck, or same issue?

Automation prog for placing the file( Excel) From production server to unix

Hi Experts,
How to write a program to automate a file from production to unix server?
Right now user is downloading the file from application server and sending the file thru mail.
Is it possible in ABAP or Do we need to write in Unix?
Thanks In Advance.
Regards,
sridhar

Please see old threads for similar discussion -- http://forums.oracle.com/forums/search.jspa?threadID=&q=Shell+AND+Script+AND+FTP&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
Thanks,
Hussein

Drag and drop files from outside of DW into DW Files Window

When I was using Dreamweaver CS for Windows, I could drag and
drop files from my desktop directly into the Files Window of
Dreamweaver. But I can't do that in the Macintosh version. Am I
doing something wrong, or is it not supported?

No. This is not supported.
We cannot comment on upcoming versions.

Placing the file in the Dynamic folder

Dear All,
We are having the some requirment like.
We developed one Adaptermodule to pick up the Excel sheet and reads and create one file for each sheet. These files are placing in one Target folder.
Here we are developing the one more communication channel to pickup the file from this folder and trying to place the file in the particular folder based on the File name.
Now my requirement is we need to place the file in the Target folder based on the File Name.
For ex if the File name is INT0001.txt then we need to place this file in usr\sap\450\in\INT0001\ folder and
if the file name is HIRING.txt then we need to place the file in usr\sap\450\in\HIRING\
if the file name is INT009.txt then we need to place the file in usr\sap\450\in\INT009\
Here we are not using any IR objects in this development.
Please give any suggistions to solve this problem.
Regards
Goli Sridhar

Hi,
Try Variable Substitution method.Refer the link for use of Variable Substitution..
[http://help.sap.com/saphelp_nw70/helpdata/EN/bc/bb79d6061007419a081e58cbeaaf28/content.htm]
In file access parameter you should select create target directory.
you should have read,write access for creating folder.
Regards,
Prakasu

How to copy/send text file from FTPS to SAP ECC File Port

Hi Frdns,
I am working on one design, actually my requirement as follows
I am receiving financial information document from Banks, which is in the form of BIA2 message format, it looks like text file. This information needs to be sending to SAP ECC system.
I identified some approaches to full fill the requirement
1)Using Conversion agent/or third party tools to convert BIA2 message in to XML, then using PI I will pick up the XML message, convert it in to IDoc.
2)Without any conversion I will copy the same file (original BIA2 message) in to SAP ECC file port, in this case no conversion required, calling some program I will schedule it.
I am looking forward t implement the second approach because it saves lot of money to my client.
Now I am wondering using File adapter can i copy to SAP ECC File Port or I required ABAP proxy?
What is the best approach to copy the BIA message text file from FTPS to SAP ECC File Port.??
Regards,
Raj

Hi Raja,
>>Now I am wondering using File adapter can i copy to SAP ECC File Port or I required ABAP proxy?
Yes you can do this copy, the only restriction that can happen is the file size.. If you are sure that the fiel will be of few MB at the max then you can use the Configuration part alone and copy it to ECC folder. For doing this you need the following:
1. Sender agreement (mention the sender interface as anything XYZ)
2. Sender communication channel. Pick the file in binary mode
3. Receiver determination (keep both the sender and receiver service as same)
4. Interface Detemiantion (dont specify any mapping and keep the receiver interface name as XYZ)
5. Create receiver agreement (with same service and interface)
6. Use file adapter here
Regards
Suraj

Error while uploading mpp file from OPENPS to SAP PS

Hi,
I am trying to upload project .mpp file from OPENPS to SAP PS with following feild:
ID, Description, Task calander, Start Date, End Date, Object type
but at the time of uploading it showing error:
1: E CN194 The stauts could not be created while creating network.
2. E BS001 No status object is available for wbs #
3. E CN068 WBS element control area is not same as network control area.
Kindly sugguest me to resolve all these issue.
Mukul

Hi,
Are you creating new project or updating existing project ? from error it seems to be you are trying to update the existing project you are trying assign the network to WBS which are not having same controlling area and user staus is active.
Please check your .mpp project data.
regards,

Change the permission while placing the file

Hi Experts,
I have a production issue :
I am placing the .txt file into a SFTP server location from a SFTP Location[NO Transformation in the file]. (Sender and receiver channels are SFTP)
I am using user- user1(for example) which have the read write access to the particular folder, hence when it places the file it places with 664 permission .(This permission gives only user1 as read/write access , but other user have read only access).
The requirement :
The user2 want to deletes the file from the particular folder location , they want to know by any means can PI change the permission while placing the file into that location so that user2 can also have read/write access.
Can you provide the opinion whether it can be done using SFTP receiver channel or any other option to change the permission of the file.

As far as i know the permissions are related to the folder and the User not for files
While creating the access, a particular user authorizations related particular folder, not related to files.
So this should be done some thing like by giving the read/write access to user2 as well
Regards

Uploading PDF-file from unix to SAP internal table

Hi,
i have to write an abap that sends a pdf-file from a unix (SAP server) by mail to some people.
The mailing part is done, but for creating the attachment. I'm reading the pdf-file into an internal table (in a binary way). Then i'm using this int.table to send the mail.
The email is sent with an attachment, but i cannot open the pdf-file because of an error ( file damaged ). So before sending it by mail, i'm downloading the pdf file to my pc by using WS_DOWNLOAD with the same internal table. The download file gives the same error.
If i look at the size :
- originally pdf file 71743 bytes
- resulting pdf file 71665 bytes (281 lines x 255)
The creation of the internal table is as follows :
open dataset g_file for input in binary mode.
check sy-subrc eq 0.
do.
*    read dataset g_file MAXIMUM LENGTH 255 into wa_pdf.
    read dataset g_file into wa_pdf.
    if sy-subrc ne 0. exit. endif.
    append wa_pdf_hex to i_pdf.
enddo.
close dataset g_file.
where:
types: tt_pdf type table of soli,   "raw 255 long
data: i_pdf type tt_pdf,
         wa_pdf like line of i_pdf
Is there a better way to read in the pdf-file ? Any suggestions ?
regards,
Hans
[email protected]

Hello Hans,
this is a little example from a program to send mail with picture. The problem is the same
form p_create_mail tables itab_html.
data : object_hd_change like sood1 occurs 0 with header line,
         objpara          like selc occurs 0 with header line,
         receivers        like soos1 occurs 0 with header line,
         packing_list     like soxpl occurs 0 with header line,
         fic_attach       like soli occurs 0 with header line,
         struct_user_adress like usaddress ,
         v_file(80) type c ,
         v_buff(255) type c ,
         v_num(9) type n,
         v_length type i ,
         v_total_length type i,
         v_len(9) type n.
move : 'HTM' to object_hd_change-file_ext ,
         'PIOU' to object_hd_change-objdes.
append object_hd_change.
* Find email addr for the username.
loop at s_bname.
    call function 'SUSR_USER_READ'
      exporting
        user_name                  = s_bname-low
      importing
        user_address               = struct_user_adress
      exceptions
        user_name_not_exists       = 1
        internal_error             = 2
        others                     = 3.
    select single smtp_addr
           into receivers-recextnam
           from adr6
           where addrnumber eq struct_user_adress-addrnumber
           and   persnumber eq struct_user_adress-persnumber.
    if sy-subrc eq space.
      move 'U' to receivers-recesc.
      append receivers.
    endif.
endloop.
* Get the picture.
move '/sap_interfaces/D27/pzr_00/data/test/logopharma.gif'
       to v_file.
open dataset v_file for input in binary mode.
do.
    read dataset v_file into v_buff length v_length.
    v_total_length = v_length + v_total_length.
    move v_buff+0(v_length) to fic_attach-line+0(v_length).
    append fic_attach.
    if sy-subrc ne space.
      exit.
    endif.
enddo.
describe table fic_attach lines v_num.
describe field fic_attach-line length v_len.
move : 'Logo' to packing_list-objdes ,
         'Logo' to packing_list-objnam ,
         '1'    to packing_list-body_start ,
         'raw' to packing_list-objtp ,
         'GIF' to packing_list-file_ext .
packing_list-body_num = v_num.
packing_list-objlen   = v_num * v_len.
append packing_list.
* Send mail.
call function 'SO_OBJECT_SEND'
       exporting
           object_hd_change           = object_hd_change
           object_type                = 'RAW'
           owner                      = sy-uname
       tables
           objcont                    = itab_html
           objpara                    = objpara
           receivers                  = receivers
           packing_list               = packing_list
           att_cont                   = fic_attach
       exceptions
           others                     = 01.
endform.                     " P_CREATE_MAIL.
Regards
Frédéric

Can't deleted files from hdd despites itunes managing the library

Hey,
I ran into a little problem today. I am rather new mac user and absolutely loving it. My itunes is setup with the library in the Shared folder with all the same access rights, which allows me to have the same library for both users on the computer. The folder is Computer:User:Shared:Music:iTunes Music:
But when I try to delete an album in itunes, it doesn't delete it from the actal hdd. I got both options in the settings checked, ie manages the itunes library and copies the files to itunes folder when added.
Any idea how I could get around this and fix this?
//Jacob

"And you are telling me that all the songs have to be within the itunes folder right?"
You can put your song files anywhere you want. All I have said is that when you delete a song from an iTunes library, iTunes will only give you the option of erasing the file from your hard drive if the song file is in the folder designated by "iTunes Music folder location."
"How come when I import an album, that it is placed in the Musik folder rather than Musik:itunes folder?"
Based on the example you gave, where the iTunes Music folder location is set as Users:Shared:Musik:iTunes Music, this is impossible. New albums would go in the iTunes Music folder, not the parent Musik folder. Check your setting and try importing another album. If what you say is true, it is an anomaly that cannot be explained.

Picking files from portal to sap & placing the files to portal back

Similar Messages

Maybe you are looking for