Picking Some Info Through FMS

Hi All,
I need to pick a field to the Sr. No window while entereing a GRPO from a Purchase Order. I did so but the problem is in case of multi row entries. In case I have a PO for 4 items and all four items have a specific/unique value in the field I want to pick in the Sr. No window. I used the following query
SELECT T1.[U_REFNO] FROM OPOR T0 INNER JOIN POR1 T1 ON T0.DocEntry = T1.DocEntry WHERE T1.[ItemCode] = $[$43.5.0] and T0.[DocNum] NOT IN (SELECT Distinct T0.[BaseRef] FROM PDN1 T0)
I put this FMS on Mftr Sr No field and refreshed it based on the Sr. No field. But this query displays PO field only for the first row item on all 4 rows in Sr. No window. I want to have the field from PO on item basis.
Any one can help me with this.
BR
/Siddiq

Since the top window of the Serial Number selection screen has the Items listed in rows, highlighting each row is necessary for getting the relevant details from the PO.
If the focus row is the first row, the data is bound to repeat.
Suda

Similar Messages

Looking for some info, Creative is not much help.

Looking for some info, Creative is not much help. Ok, right now I have an Audigy 2 ZS Platinum. It can use the digital inputs to decode either Dolby Digital, DD EX, DTS, and DTS ES to the analog speaker outputs. (Also a 5. setup.)
I recently built a new PC, and would like to replace the sound card, but I use that feature (as well as some others). Seeing how Creative doesn't want to easily display the capabilities of there cards, I would like someone to let me know what card will allow the fallowing in Windows XP, Vista, and theoretically Windows 7.
Hardware decoding of Dolby Digital, DD EX, DTS, and DTS ES and allow a proper 5. playback through analog speakers.
Recording of whatever is playing out of the the speakers. The recording selection is labeled "What U Hear")
The reasons behind me wanting to buy a new card are simply that I would prefer to run it through PCI-Express, and have full compatibility at the release of Windows 7 without any loss of features I need. From what I can tell, if things work in Windows Vista they will work in [email protected]

All I can say to you (someone correct me if I'm wrong) is that Xtremegamer's doesn't decode DD/DTS via hardware with official drivers (altough they're capable of - all X-Fi are capable of decoding). XtremeMusic does the job with official drivers. I don't know the rest of the models. Someone adds [email protected]

Pricing Condition not picking from Info record

Dear Sapians
We have made all the Changes for Higher Education Cess. Now while creating PO some conditions are not picking from info record(only for some materials). In Dev. server Everything working fine.
What could be the problem?
Warm Regards
Sukumaran.E

Hi Sukumaran,
You need to go to PO -> item conditions -> press analysis button.
double click on the pricing condition on left hand side screen. You will get proper analysis. Like "PBXX 111 Condition ignored (requirement 005 not fulfilled)"
These descriptions will give clear hint on the reason of price not being picked up.
- Sanjeev

Net price not picking from info record

I am creating a new PO, but net price is not picking from info record. Info record is getting copied in the line item for PO, but net price is not copied. Due to that I am unable to create PO. If I manually enter price PO can be created. Could someone tell me what might be the reason Price is not automatically taken from Info Record. Please guide me what all I need to check.
The same data is working in one cleint, and in another client this data is facing problem.
Thanks
Vineeth

Hi
1) If there is condition record exit in system,then while creating po system will take condition record
2) If In inforecord last po number is exist for material and vendor ,then system will take this into consideration
3) if your creating po first time for material and vendor ,and we have maintain purchasing inforecord for purchasing organization and for plant,then system will take it into consideration
40 If none is available we have to put condition manually in po
Regards
Kailas ugale

Looking for some info before deciding to install

Normally, I would try to some searching before posting, but I've been pressed for time lately. Anyways, I'm looking for some info about Solaris before deciding to dive into installing it.
1) Can it be installed on what's a currently triple-booting system without problems? In this case, Solaris would be installed onto half of the slave HD.
2) How difficult and lengthy is the installation process?
3) Does Solaris come with it's own unique bootloader? Can it recognize other operating systems? Is it possible to not install that bootloader and simply edit the configs for a preexisting GRUB to allow it to boot Solaris?

The only way to get content into the Music app is via iTunes store downloads or syncing with itunes on a computer. You will need to find a third party media player such as VLC (whick integrates with DropBox and GoogleDrive, if that appeals to you).

I can not see my website in firefox. It works in all other browsers. Could I get some info on how to make it visable in Firefox??

I am working on a site in wordpress and realized that it's visible in all browsers except Firefox. Could you give me some info on how to fix this issue?

I have no problem seeing - http://www.expeteccorporation.com/ - in Aurora 10.0a2.
Try the Firefox SafeMode to see how it works there. <br />
''A troubleshooting mode, which disables most Add-ons.'' <br />
''(If you're not using it, switch to the Default Theme.)''
* You can open the Firefox 4/5/6/7 SafeMode by holding the '''Shft''' key when you use the Firefox desktop or Start menu shortcut.
* Or use the Help menu item, click on '''Restart with Add-ons Disabled...''' while Firefox is running. <br />
''Don't select anything right now, just use "Continue in SafeMode."''
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before using the Firefox shortcut (without the Shft key) to open it again.''
'''''If it is good in the Firefox SafeMode''''', your problem is probably caused by an extension, and you need to figure out which one. <br />
http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes
''When you figure out what is causing that, please let us know. It might help other user's who have that problem.''

Unable to send or receive contact info through message

Hi, I am unable to send or receive contact info through message.How to solve this problem? thanks

Business card/vCard is exchanged through MMS and not by SMS.
Make sure your MMS is configured and activated and you have cellular data/3G ON while exchanging MMS.

HD video Delivery through FMS

Can we broadcast our video in HD Quality through FMS? if possible what we have to do for that, whats the minimum bandwidth needed to deliver the HD quality video?

Yes FMS does support HD Streaming.Install this app : http://www.videoRx.com/apps/air/BitrateStarterRx.air - it would help you in your bitrate/bandwidth calculations.

IPod Touch Headphone Jack - Need some info on my GB appointment tomorrow!

Greetings
My iPod Touch headphone jack is broken for some reason, and I just made an appointment to go to the local Genius Bar with my father, as I don't yet have my license. I need to know some info, like:
Is there a cost to fix the headphone jack?
Any good tips to get a better experience or any helpful info for my appointment tomorrow?
Thank you

Any good tips to get a better experience or any helpful info for my appointment tomorrow?
Be polite!

New Builder needs some info K9A Plat. RAID Array help

This is a new build AMD 64x2 6000+, K9A platinum, Lite On DVD Re Writeable SATA, 2x74Gig WD Raptors in Raid 0, Asus X1950 pro Thermaltake 700 W PSU Crossfire cert.
BIOS registered my drives, Built array PC Rebooted, Installing Win XP pro Hit F6 install drivers, Format drives, Then before Install It says that :setup cannot copy the file ahcix86.inf.
If I skip it, it will install XP but when I try to boot from the hard drive It starts to load XP but crashes to the blue screen of death
*** Stop: 0x0000007BC ( 0xF78A2524, 0xC0000034, 0x00000000, 0x00000000)
Has anyone got this error string?
First RAID array I would very much appreciate any help given.

Hi!
Looking at some info on Google and Microsoft site, I cannot find the BC error code, only the error code ending with B. It indicates an error with the boot device. It can be caused by several things.
Check that you are using the correct device drivers to install Windows
Also, check the installation CD. It could be that the disk was damaged and that you are missing a crucial file because of that
You can also try installing Windows again and choose to recover the previous installation.
If this all does not help, try installing Windows on a single HDD (no raid) to see if that will work.

My Ipad crashed, so I pressed both power and home button, now I have to restart my ipad on the itunes, but there are some important info I cannot loose... how can I save this info at this time? actually is some info the I saved in the "notes" app! help!!!

My Ipad crashed, so I pressed both power and home button, now I have to restart my ipad on the itunes, but there are some important info I cannot loose... how can I save this info at this time? actually is some info the I saved in the "notes" app! help!!!

I Had it on my iPod, but I reset to factory settings and it got deleted :( If I find a way to get it back, I'll post it here so you can too.

Satellite Pro A10 - need some info about RAM upgrade

Dear Fourm members
In regard to the above machine : please can anyone advise :- how many memory slots does it have.
I think it is two but am not sure.
Also what max size memory module can we have in this laptop please.
If it is 2 @ 1gb per module, then we would have a total of 2gb.
Is the hard drive on this machine a standard laptop hard drive. Can I take the small 20gb one out and replace it with a larger one. eg 120 gb etc
Thank you so much for your help.
Ian

On satellite Pro A10 two memory slots are available. Notebook can handle with 1 GB RAM and you can use two compatible PC2100 512MB (PA3164U-1M51) modules.
This old machine uses 2,5 HDD with old IDE connector. I found some info that it was delivered with 20GB, 30GB and 40GB HDDs. I think you can upgrade it with HDD up to 100 GB but just be sure it has the same HDD connector.
If you have more questions you are welcome.
For more info post exact model number please.

HTMLLoader and embeded *.pdf file - get some info

Hi,
Is there any way to get some info from embeded in HTMLLoader *.pdf file ? I'm writing a small AIR application which need's for example number of a currently viewed pdf page. I'm using Flash Builder (trail version) and Adobe Reader 9 as a pdf browser. Of course I saw http://www.adobe.com/devnet/air/flex/quickstart/scripting_pdf.html but I'm using free Adobe Reader - not professional.
Thank for Your answers.

Yes, just after posting--and it solved the problem.
Thanks.

Scenario: User enters some info, I only want to be able to see it for 3 day

User will be able to go to a site and enter some info, lets say its like a singles add. After the user submits, I only want the ad to show for 32 hours.
How would i go about flagging the record. I couldnt possibly run a program constantly checking the database for old records. Does anyone have any ideas on this.

Hi,
Yes I am saving creation date. The only thing that I am confused on is flagging the record when the date is considered old. DO i have to constantly run a program checking for old dates? What if i run this program every minute. What happens if the data is crucial and if its an old date , it shouldnt even show for the minute in which the purge program hasnt run yet.
My example used hours, but what about using minutes and seconds.
I guess could add lets say 32 hours, 5 minutes to the creation date in the file. If its greater than now, dont show. Then run a purge program every couple of hours to get rid of the old data to speed up processing.
I think I just figured this out, but I am willing for any more input.
Thanks

I erased some info by mistake, on my iPad, and I would like to restore it....How???

I erased some info by mistake, on my iPad, and I would like to restore it. I do know that I have to 'Reset -> Erase All Content and Settings', but I keep on getting a restriction code that will not be accepted as my code that I set. I have 3 more chances before all data is erased...
What do I do???

I'm worried that my iPad will automatically sync with iTunes when I connect.
If that is what usually happens when you connect your iPad, - if that's how you have the iPad set up to sync - then yes it will sync automatically.
You can open iTunes on your computer. Select Preferences from under the iTunes heading at the top menu. Then select Devices in the preferences pane. Click on the box that says - Prevent iPods, iPhones and iPads from syncing automatically. Quit iTunes and restart your computer. Then connect your iPad.
You may have to launch iTunes on your own when you connect the iPad, but it should not sync automatically now.

Picking Some Info Through FMS

Similar Messages

Maybe you are looking for