Picture Tweaks/Calibration for TOSHIBA 32C100U 32" LCD
I just bought and hooked up a 32" LCD TV from Toshiba, model C100U and am looking to get help with calibration tweaks in order to achieve the best picture and performance possible. I'm hoping someone will be able to provide assistance...fingers crossed...
TV Info: http://www.amazon.com/Toshiba-32C100U-32-Inch-Black-Gloss/dp/B0038JED6M/ref=sr_1_1?ie=UTF8&qid=12919...
I've noticed that at I see some brief red-hued ghosting/picture lag on occasion in my picture; this has happened both with basic coax cable connection and when watching a DVD. I am a graphic designer with a very sensitive eye for detail, so this bothers me, while others may not even notice it; nevertheless, I'd like to alleviate it if at all possible. Is this normal? What can I do to fix it?
Thanks in advance!
My parents have a 37-inch Toshiba, I have experienced the same problem when watching movies via the Dell laptop. It happens both in VLC player and Windows Media Player, and I am using a VGA cable to connect to the TV. The problem was still there when we used an S-video cable. It sounds like it might be something about these Toshiba TVs.
Similar Messages
-
If someone can please inform me as to where this information can be found it would be very helpful. thank you
Yes, do what they mean and not what they say . In fact a very small percentage of people saying dpi actually mean dpi, most mean ppi.
PPI is pixels per inch. Pixel stands for the smallest Picture Element. Pixels exist in digital files and pixels is also used for describing resolution of LCD displays where it means the smallest LCD picture elements (cells) of the screens. Pixels also can be used for the number of pixels camera sensors can produce.
DPI is dots per inch and is mostly used for smallest ink drop (dot) a printer is set to print. DPI can also be used for the samples of scanners and for describing the CRT monitors' resolution because the technology used for CRT monitors is more like printing dots than using fixed size cells as is the case with LCD screens, although when LCDs appeared on the market people started to use the term pixels for CRTs and some people used dots meaning LCD pixels and probably from there also meaning the same for pixels in digital files. -
In am a Nikon shooter. Along with Adobe Standard, the Nikon Picture Control names are listed in the drop-down box for LR camera calibration presets. When I select one of the Nikon Picture Control names for camera calibration, I'd like to understand if LR is only applying the settings which appear in Camera Calibration screen (shadow tint, and the R, G, and B hue and saturation), or is LR somehow also applying any of the other Develop settings associated with the Nikon Picture Control (sharpening, contrast, brightness)? I understand that I could change sharpening, contrast and brightness using Develop presets, but I'd like to understand whats going on the Lightroom calibration area first so that I do not overdo or duplicate the edits.
The camera profiles also contain a tone curve.
-
How to add pictures in CCM for items in SRM_EXTRAXTED_CATLG
Hi guys (and girls of course),
Best wishes for 2007 for all of you.
I've got following issue I've been struggling with: I'm trying to add a picture to items in CCM, but for items coming from R3 (replicated to SRM). I want to use the standard PICTURE/URL field for this ('complex' data type)
(procedure for uploading R/3-materials is currently already working)
I've been checking out following BADI's:
<u>/CCM/IF_EX_CTLG_ENRICHMENT~ENRICH_ITEM</u>
I have found an example for implementing this in another thread and this seems to work for 'simple' characteristics, eg /CCM/CONTRACT_ID as mentioned in the example)
<u>IF_EX_BBP_CCM_CHAR_MAINT~VALUATE_PRODUCT</u>
for additional customer-characteristics this works fine, also for simple standard characteristics (eg /CCM/MPN) this works fine.
But in both cases i seem to be unable to fill the complex characteristic /CCM/PICTURE (subfield /CCM/URL). I tried to use the same syntax as in the CSV-load file (ie /CCM/PICTURE#/CCM/URL) but it's not working as i expect.
When i add this info manually to the field, the picture shows as expected. (But adding this info manually is not an option of course.)
Any thoughts or hints would be greatly appreciated.
Some additional information
SAP_ABA 700 0009 SAPKA70009
SAP_BASIS 700 0009 SAPKB70009
PI_BASIS 2005_1_700 0009 SAPKIPYJ79
ST-PI 2005_1_700 0001 SAPKITLQI1
SAP_BW 700 0009 SAPKW70009
SAP_AP 700 0006 SAPKNA7006
CCM 200_700 0005 SAPK-27005INCCM
SRM_PLUS 550 0006 SAPKIBK006
SRM_SERVER 550 0006 SAPKIBKT06Hi ,
I was not active on SDN for some time hence did not see yr thread.
We had used SRM_EXTRACTED_CATALOG in our earlier project and managed to get pictures for all the items in shopping.
The path we took:
with the report BBP_CCM_TRANSFER_CATALOG get the SRM_EXTRACTED_CATALOG in CAT
map the relevant categories in SRM_EXTARCTED_CATALOG to /CCM/MASTER_CATALOG.
import all the picture JPEG files for all the items in the MIME of server
SE80->MIME repository -> drill down to BSP/SAP/BC/CCM (sorry i don't remember the exact path and I don' t have the system now) -> create yr own folder-> import all the JPEG files to this folder.
now derive a URL for each item in a format: http:
server name.domain name\services (sap\bc\bsp\cat\yr folder name\file name)
validate this URL in IE
it should derive the picture from the MIME of yr server and show you on screen
now go to mastrer catalog ->open the chara "image" for each item -> paste this url and type (JPEG) -> and save the item
this should give picture of each item when you are shopping in EBP as preview and in detail also
it's somewhat cubersome to paster those URLs but it's one time activity.
Helpful?
BR
Dinesh
reward if helps -
After navigating (sometimes downloading pictures, sometimes not) for approximately 10 minutes, I can no longer see contents of drop down menus, then Firefox freezes up and I have to use Ctrl/Alt/Delete to end my internet experience.
== This happened ==
Every time Firefox opened
== After upgrading to 3.6Step by step, how did you arrive at seeing this agreement?
-
Right Angle 90-degree Power Adapter Connector Converter for TOSHIBA Qosmio X875-Q7290
Hello, I am having problems with my power connector not staying in it's socket allready!!The laptop is on a small table and the laptop is only used a few times a week!Is there a Right Angle 90-degree Power Adapter Connector Converter for TOSHIBA Qosmio X875-Q7290?I think this would help solve the problem. Thank You
Get an aftermarket universal charger, perhaps? Their connectors are mostly right-angle. I have some iGo Green model that looks like this but is an older model. http://www.newegg.com/Product/Product.aspx?Item=N82E16834993922
-
How to Sync pictures from AD for users in Outlook Contacts?
Hi we recently enabled adding profile pictures to AD from sharepoint. This works fine, the attribute shows in AD and the pictures show in Lync. Now in Outlook there are soem inconsistencies. I am are running
Outlook 2010 windows 7 64 bit. The user pictures from the Global Address List show up fine in the people pane, however for users that I have a local outlook Contact created for the pictures do not show in the "people pane",
or the outlook "contact". however the picture DOES show up in the outlook "Contact card". If I click update on the outlook contact I get a message "no changes were found for this contact".
If I delete the local contact and re-add them the picture is there. I don't think the solution is to delete and re-add contacts, as the reason to have the local contact is generally because we have added info that is not in GAL.
Any way to force the sync of the picture from AD for local contacts?
Thanks,
JonathanFor future readers of this thread, this article may give you some ideas:
Adding
Employee Photos to the GAL
Once you get AD Thumbnails in place, this article may also help:
Best Practices to Sync the GAL to Outlook Contacts -
I cannot upload any pictures to Flickr for the past three days, I just get the upload screen which when I click on upload does nothing I'm using PSE12, I have had no problems in the past , I still have had no response to this post and it has been several weeks since initially posted, is there anyone awake at Adobe, can someone give me advice or is there total lack of interest once the product has been purchased I have been a customer of PSE for many year since PSE6 now on 12 but lack of response may cause me to rethink
Turn off your iPad and put it in recovery mode. Try to restore it via iTunes.
http://support.apple.com/kb/HT1808 -
Apple TV 2 picture goes black for a second every now and again
Apple TV 2 picture goes black for no aparent reason, just for a second every now and again, no Jailbreak, software is up to date.
Happens witth the iOS 6 and the one before, not shure about previous iOS versions.
It´s not the Cable, Wifi or Lan.Try the following steps, check whether things are working after each step where appropriate, before trying the next.
Restart the Apple TV (Settings > General > Restart).
Restart the Apple TV by removing ALL the cables for 30 seconds.
Reset the Apple TV (Settings > General > Reset > Reset all settings)
Restore the Apple TV (Settings > General > Reset > Restore) -
Montior/display calibration for photography?
What is the best way to go about calibrating my MacBook display to give me accurate color representation while working with my photographs? When I get them printed, they don't look as good as they do on my screen.
All the tutorials for monitor calibration for photography purposes I can find have been for Windows.
Thanks in advance for any help,
DaveHi Dave.
Well, if you want to get really professional, a good idea is to buy some calibrating hardware. Pantone's Huey does a really nice job according to MacAddict magazine (now Mac l Life magazine).
http://www.electronics-batteries.com/digitalcamera_accessories_pantonemeu101.htm
If you want to go the "free" route, you can generally calibrate the display through the displays system preferences pane in System Preferences. Just click on the "displays" pane and then click on the color tab. You can then create a custome color profile by following the on-screen instructions.
Hope this helps. -
Velocity Displcement Calibration for Sound and Vibration Tool Kit
Hello Guys,
I have been working on sound and vibration tool kit recently.
I'm taking input from sound port of PC by signal generator and taking single and double Integration for velocity and displacement resp.
I want to check the correctness of the values for different amplitudes,and different frequencies of signal, velocity and displacement.
The RMS values for signal is calibrated as per signal generator, RMS value for the Velocity is correct for a limited frequency range
and the RMS value for the displacement is not at all calibrated for any of the frequency.
I will appreciate replies,Hey guys,
The following vi is working
for the signal generated with in Labview but if the signal is taken
from mic port through signal generator.
then the velocity and displacement is not coming.
i'm attaching vi below kindly reply if someone get something
Attachments:
avd signal generator labview.vi 26 KB
avd mic port.vi 36 KB -
Transfer of On-Line registration for Toshiba Laptop
What is the procedure for transfer of Online Registration for Toshiba Laptop
when I bought from a delaer who has already registered on his name.Hi
I believe its not possible to do it on the website.
I think you have to contact the Toshiba service partner in your country.
I think you will need also a confirmation from you dealer who has registered this notebook.
But the ASP should give you more details what is needed.
The whole database of ASP worldwide you will find on the Toshiba European support page. -
[svn:bz-trunk] 10631: Proper fix for BLZ-343 and LCDS-1153.
Revision: 10631
Author: [email protected]
Date: 2009-09-28 05:23:42 -0700 (Mon, 28 Sep 2009)
Log Message:
Proper fix for BLZ-343 and LCDS-1153.
Refactored the common logic for AMF0 and AMF3 back into AbstractAmfInput. Resolving class aliases, creating and registering a property proxy and instantiating the appropriate class are now handled in the superclass. The resolved className and the proxy are 'returned' to the subclasses via a holder array created in the subclasses and sent as a parameter.
blazeDS checkintests pass
lcds-trunk checkintests pass with the new flex-messaging-core.jar
lcds-trunk alltests-dataservice pass with the new flex-messaging-core.jar
Ticket Links:
http://bugs.adobe.com/jira/browse/BLZ-343
http://bugs.adobe.com/jira/browse/LCDS-1153
Modified Paths:
blazeds/trunk/modules/core/src/flex/messaging/io/amf/AbstractAmfInput.java
blazeds/trunk/modules/core/src/flex/messaging/io/amf/Amf0Input.java
blazeds/trunk/modules/core/src/flex/messaging/io/amf/Amf3Input.java -
Deleting pictures it takes for ever each time
When I delete pictures in Photoshop Elements, it takes for ever each time. I have a fast computer, so some setting is wrong or a bugg in the program. Has anyone the same problem?
Actually also when I start it can be slow and when thumbnails are created, maybe it is operations when accessing the disk that is slow.
Hälsningar
Rolf
Från: saurabh288 [email protected]
Skickat: den 26 februari 2013 12:57
Till: Rollo2013
Ämne: Deleting pictures it takes for ever each time
Re: Deleting pictures it takes for ever each time
created by saurabh288 <http://forums.adobe.com/people/saurabh288> in Photoshop Elements - View the full discussion <http://forums.adobe.com/message/5103232#5103232 -
Camera Calibration for Sony A500
When I go into the camera calibration for shots taken with my Sony A500, the *only* thing that appears in the profile drop-down is "Adobe Standard". Does that mean that there isn't a profile available for the A500?
" the fact that there aren't other profiles simply means that Adobe has not created other profiles that simulate in-camera rendering styles for your camera model."
So can anyone confirm that these in-camera rendering styles / profiles are not available for the A500?
And in general, if you haven't bought a Canon or Nikon, should you just expect that LR doesn't love you as much?
Maybe you are looking for
-
24" iMac 2008 3.06ghz - Freezes/Beach balls/Sometimes can't find hard drive
Hi All, Recently i've been having alot of issues with my 24" iMac. After reading countless discussions, none seem to have had the same answer as everything i have tried just doesn't seem to have worked?! Hoping you can give me a few more ideas and he
-
In my hp 4530 one speaker is not working.?
when i was listening music one speaker had been disappear. plz tell me soltion . i have install driver again the problem not solved
-
Packer install error pgp signature
I was running AppSet-Qt and in Aur part it said to enable package support you have to install packer. I tried to install packer with pacman -S but I keep getting errors packer-20140817-1-any 9.5 KiB 175K/s 00:00 [#####################] 100% (
-
Safari: how to autofill filename when using 'download linked file as' option
I usually need to download email attachment to specific folders, not to the downloads folder. When I use "download linked file as" I get the option to choose the location, which is great, but the filename is '0'. I don't want to have to cut and paste
-
How to run the paper layout & web layout?
Hi, I have 10gR2 application server (Linux). A report was created in Reports 6i, now i opened the same in 10g and compiled in my local machine(development pc with windows xp). question 1 In the development pc, i can run the paper layout but the same