PIE Chart Drill down in bex report

Hi Friends,
In my bex report i have pie chart for year 2008.
Shall I drill down on this report means if i click on one part of the pie chart will i go to another report or another pie chart.
Can any one pls tell me is it possible .
Thanks & Regards,
Ramnaresh.
Edited by: ramnaresh porana on Dec 1, 2008 6:35 AM

Hi ,
Thanks for reply.
how it is possible from context menu of the pie chart , i have seen the context menu of the pie chart but i did not get any related option for this one.
Can you pls guide me.
Thanks & Regards,
Ramnaresh.

Similar Messages

Pie chart drill down in bex

Hi Friends,
In my bex report i have pie chart for year 2008.
Shall I drill down on this report means if i click on one part of the pie chart will i go to another report or another pie chart.
Can any one pls tell me is it possible .
Thanks & Regards,
Ramnaresh.

Hi ,
Thanks for reply.
how it is possible from context menu of the pie chart , i have seen the context menu of the pie chart but i did not get any related option for this one.
Can you pls guide me.
Thanks & Regards,
Ramnaresh.

Issues with multilevel pie chart drill down with push button

I am new to Xcelsius. I am trying to build a multilevel pie chart drill down (one pie chart drilling down to another etc) and I am able to achieve that. Now I want to add a Back Button using Push Button so that I can go up. When I preview, the Push Button goes into two state and I have to double click to go back. Can anyone tell me what I am doing wrong. I am using the latest Xcelsius. [The source code is here|http://www.woofiles.com/dl-195360-3lTyVM8Z-piechartdrilldownwithpushbutton.xlf]
Thankyou.

Hi Murali
This is exactly the same what i tried to do,
Drill down to 4 levels State -> City-> store etc with 4 pie charts and similar push button to close each level to
go back to previous chart, first run from 1 to 4 works fine, then after closing all the levels and when i am at the pie chart 1
if i click any pie slice it will jump to Pie chart 4 straight,
I tried tracking the issue, all i could find is some how the previous dynamic visibility values are back even after erasing
the data with the PUSH button (Destination cell insertion with blank or 0).
did you find a solution for this issue ?
Thanks
Chandra

SVG Pie Chart drill down report

I have created a svg pie chart report within a chart region. the chart contains url drill down.
The urls work fine but it opens the result from the url in the same chart region on the same page.
How can I get it to open on either a new page altogether or on another region on the same page.
Regards
iculhane

How do you get the url drill down to work? Can you explain to me? I have a 3d pie chart, what I want is when I click one of the pieces, it will drill down to a report.
Thanks,
Helen

Pie Chart Drill Down Report

Hello All,
Please help. I created a 2D Pie chart. How do I get chart to drill down to a report based on the slice of pie I click. I've already created the report. I can't seem to get the link working.
Artnette

Artnette,
See this example:
http://htmldb.oracle.com/pls/otn/f?p=31517:156
Denes Kubicek
http://deneskubicek.blogspot.com/
http://htmldb.oracle.com/pls/otn/f?p=31517:1
-------------------------------------------------------------------

Pie-chart drill-down

Hi,
I have created a pie chart on my report. I want it so that the user can double click on a segment of the pie and drill-down to view some detailed logs. The logs just being a list of details from the records like "name" "age" etc.
I have read some stuff on subreports and linking, but im not quite sure wether this is the way to do this or if there is an easierway without all that subreport linking malarchy.
Is there an easier way? and if so, could you please provide me with a step-by-step as im fairly new to this whole crystal reports thingamajig. Thanks
J

Hi James
You can get a drill down on your pie chart once you apply groups in your report and create chart based on those groups.
For example: I create a report to display the last year sales for all the cities in a country. I want a drill down onmy pie chart for the cities. I do the below:
1. I create two groups on Contry and City.
2. Now I create a pie chart. In Data tab of Chart expert select the group for City in On change of, and show value Last year sales.
3.Place the chart on group header of Country group.
4. Refresh the report, now I would get the drill down for the cities for every country in the Pie chart.
For more information please refer to Crystal Reports Help.
Hope this helps!!!
Regards
Sourashree Ghosh

Chart drill down in bex

Hi Friends,
    I need some help for this problem.
    In my bex report i have column chart for year.
    I want to drill down on this report means if i click on one part of the column chart i will go to another column chart, possible by month.
    Is it possible?
I need your help.
Thanks & Regards,
Jackie Lu.
Edited by: Jackie Lu on Aug 1, 2009 4:49 AM

Hi Sachin,
    Thanks for your quick response.
    Now I can implement it by right click from "goto" option. But is it possible by left click? Only once left click, it can go to another column chart?
Thanks&regards!

Pie chart - drill down/up with HierarchicalCollectionView

y'ello,
I started to build really simple pie chart with drill down data feature. I decided to use hierarchicalCollectionView, to access children even parent of clicked item, but one problem I realized right now is that pie chart displays only data type ArrayCollection, and hierarchicalVollectionView and method openNode() can be used only Array data type, so when I debugged I realized that can not use openNode(hitData.item) wih ArrayCollection data type b'cuz flash player pop-ups error window.
Please, chcek short source code. I thought I can make hierarchy from ArrayCollection but can not use openNode() method that next I need this method later access parent or children. Simply when I click on one wedge, drill down, again, when I click, again drill down...when I click Ctrl+click get one level back then again and again....plese help me gurues
Code:
<?xml version="1.0" encoding="utf-8"?>
<mx:Application xmlns:mx="http://www.adobe.com/2006/mxml" layout="vertical">
    <mx:Script>
        <![CDATA[
            import mx.collections.ArrayCollection;
            import mx.charts.HitData;
            import mx.charts.events.ChartItemEvent;
            import mx.collections.HierarchicalData;
            import mx.collections.HierarchicalCollectionView;
            [Bindable]
            public var cars:ArrayCollection = new ArrayCollection([
                {type:"BMW", t_count: 150, children:[
                    {type:"1 class", t_count: 18, children:[
                        {type:"Coupe", t_count: 34},
                        {type:"Touring", t_count: 42},
                        {type:"Compact", t_count: 8}
                    {type:"3 class", t_count: 14, children:[
                        {type:"Kabriolet", t_count: 12},
                        {type:"Coupe", t_count: 34},
                        {type:"Touring", t_count: 42},
                        {type:"Compact", t_count: 8}
                    {type:"5 class", t_count: 7, children:[
                        {type:"Kabriolet", t_count: 12},
                        {type:"Coupe", t_count: 34},
                        {type:"Touring", t_count: 42},
                        {type:"Sedan", t_count: 8}
                    {type:"6 class", t_count: 15, children:[
                        {type:"Kabriolet", t_count: 12},
                        {type:"Coupe", t_count: 34},
                    {type:"7 class", t_count: 8, children:[
                        {type:"Kabriolet", t_count: 12},
                        {type:"Coupe", t_count: 34}
                    {type:"X3 class", t_count: 22, children:[
                        {type:"Sedan", t_count: 11},
                        {type:"Coupe", t_count: 9},
                        {type:"Touring", t_count: 5},
                        {type:"Compact", t_count: 17}
                    {type:"X5 class", t_count: 9, children:[
                        {type:"Sedan", t_count: 33},
                        {type:"Coupe", t_count: 18},
                        {type:"Hatchback", t_count: 7}
                    {type:"X6 class", t_count: 11, children:[
                        {type:"Coupe", t_count: 18},
                        {type:"Combi", t_count: 31},
                        {type:"Hatchback", t_count: 8}
                {type:"Mercedes", t_count: 120, children:[
                    {type:"A class", t_count: 5},
                    {type:"B class", t_count: 12},
                    {type:"CLS class", t_count: 18},
                    {type:"CL class", t_count: 23},
                    {type:"C class", t_count: 12},
                    {type:"E class", t_count: 19}
                {type:"VW", t_count: 320, children:[
                    {type:"Passat", t_count: 10},
                    {type:"Polo", t_count: 25},
                    {type:"Golf", t_count: 45},
                    {type:"Touareg", t_count: 15}
            //HCV from hierarchical data
            private var hView:HierarchicalCollectionView = new HierarchicalCollectionView(new HierarchicalData(cars));
            //event handler
            private function drillDownUp(event:ChartItemEvent):void{
                if(event.hitSet && event.hitSet.length){
                    //DRILL UP
                    if(event.ctrlKey){
                        var hitItem:HitData = event.hitSet[0];
                        var parent1:Object = hView.getParentItem(hitItem.item);
                        var parent2:Object = hView.getParentItem(parent1);
                        if(!parent2){
                            myPieChart.dataProvider = hView.source.getRoot();
                        else{
                            myPieChart.dataProvider = hView.getChildren(parent2);
                    //DRILL DOWN
                    else{
                        var hitItem:HitData = event.hitSet[0];
                        if(hitItem.item.hasOwnProperty("children")){
//                            hView.openNodes(hitItem.item); //here is problem!!
                            myPieChart.dataProvider = hView.getChildren(hitItem.item);
        ]]>
    </mx:Script>
    <mx:Panel title="PieChart DDD Test - Trh predaja automobilov - 2009">
        <mx:PieChart id="myPieChart"
                     dataProvider="{cars}"
                     itemClick="drillDownUp(event)"
                     showDataTips="true">
            <mx:series>
                <mx:PieSeries field="t_count"
                              nameField="type"
                              labelField="type"
                              labelPosition="inside"/>
            </mx:series>
        </mx:PieChart>
        <mx:Legend dataProvider="{myPieChart}" direction="horizontal"/>
    </mx:Panel>
</mx:Application>

Hi Jan,
       thanks for reply,sorry i am quite new in this forum not familiar with tabs and navigation,can you please elaborate/steps to find the business card
thx
Anwy

Pie chart drill down problem

Hi,
We are facing an issue with the drill implementation in the Pie chart of the dashboard. Initially, the drill functionality worked fine but now, we observe that the drill happens ONLY on the edges of the pie chart
Now this behaviour is observed when we make following changes in the dashboard:
1) If we add new filter in the existing qaaws connection for pie chart. (The problem persists even if we remap the qaaws connection)
2) If we apply some color coding based on certain condition(formula) specified in the excel.
if we revert the above conditions, then the Pie chart works fine
We have tried the following things:
1) deleting the existing pie chart and remapping the new one.
2) Tried changing the destination cells for the pie chart.
We are stuck up with this problem without any solution from a long time. We even tried redeveloping the whole dashboard but the problem persists.
Version :Xcelsius 2008 SP3,fp3.1
Thanks.

This is actually an issue of the flash player.
Installing Windows Flash Player 10.3 ActiveX control content debugger (for IE) will solve the problem.
Or switch to Flash Player 10.1
Windows Flash Player 10.3 ActiveX control content debugger (for IE) is available here: http://download.macromedia.com/pub/flashplayer/updaters/10/flashplayer_10_ax_debug.exe
For Netscape-compatible browsers, the version is available here: http://download.macromedia.com/pub/flashplayer/updaters/10/flashplayer_10_plugin_debug.exe
No need to remove the existing flash player.

How to setup the drill down on union report

Hi,
I'm setting the union report.
I want to set the drill down to another report.
But I can't setup it.
Would you please tell me how to setup.
Thank you.

Hi Hemlatha
In Crystal Reports, to prevent the ability to drill down into a subreport when published on the Web, add a text object that is filled with blank spaces, created by pressing the 'Space Bar' and 'Enter' for line returns, to eclipse the subreport.
This workaround is applicable only to subreports that does not grow in size. For example, subreports that display only a chart or graph.
Steps to Add a Text Object over a Subreport
1. In the Crystal Reports Designer of the main report, insert a text object over the subreport.
2. Resize the text object to be the same size or a little larger than the subreport object on the main report.
3. Fill the text object with blank spaces created by pressing the 'Space Bar' and 'Enter'. This is necessary because resizing a text object without
the blank spaces will not maintain its size when it has been published on the Web.
====================
NOTE:
You can format the text object with a hyperlink to another report, another file or a URL.
====================
Now, when the Crystal report is previewed on the Web, the text object that fully eclipses the subreport will prevent the ability to drill down into it.
Regards
Girish

HOW TO ADD DRILL DOWN IN A REPORT

hi
well i want to add drill down in my report....
im unable to find it ....
can you please help me to make a drill down in my report.
thnx and regards
UMAR NAYAB.

hey thnx toronto..
im able to make drill in my report....
now my chart is not changing its data according to drill.....
like my bar chart should also change with the data drilled down....
please help regarding this....
regards.

Error Message appears when drilling down from a report.

Hi,
I am using CR XI R2.
I have an rpt file that displays a chart from a sub report.
I tested it on the CR designer and report viewer - works ok.
When I display this report in my .Net application, I get an error message when drilling down from this chart : "The Report Application Server failed"
When looking at the log files I see this error message:
4 19 13:11:14.770 5336 5564 (\servers\ras\dtsagent\reporthandler.cpp:11622): CReportHandler::buildReportViewerError: CSResultException thrown. ErrorSrc:"CRPE" FileName:"\servers\ras\dtsagent\reporthandler.cpp" LineNum:11618 ErrorCode:997 ErrorMsg:"" DetailedErrorMsg:""
This is a Viewer error - but when drilling down from the Report Viewer I don't get this exception.
Does anyone know what this mean?

Too strange and my require a phone support case;
http://store.businessobjects.com/store/bobjamer/DisplayProductByTypePage&parentCategoryID=&categoryID=11522300
Three ideas:
1) Install CR designer on one of the boxes where this does not work and try to run the report there
2) Add a line to your code and save out the report just after your database logon once ( .saveAs). try to run this report in the CR designer.
3) Use the [modules|https://smpdl.sap-ag.de/~sapidp/012002523100006252802008E/modules.zip] utility to compare the runtime - both CR and db client between computers that work and those that do not.
Ludek

SharePoint PPS Hide null or blank value in performancePoint chart drill down.

Hi,
I am using SharePoint Performance Point Service. Hide null or blank value in Performance Point chart drill down.
Thanks & Regards
Poomani Sankaran

Hi Hyaron,
I am unable to reproduce the issue in my test environment. How did you add the drilldown feature? Were you doing that by setting visibility of the column or of the group? Please ensure to add the drilldown functionality by set the visibility of the workgroup
from the Grouping Pane in the Report Designer.
How did you add the Interactive Sorting on the headers of the two columns? Based on the drilldown functionality, the Interactive Sorting on the second column doesn’t work. So, you can move the Interactive Sorting on the second column. When configuring the
Interactive sorting on the first column, you should set the parent group to sort, and sort by the field that the parent group groups by.
Hope this helps.
Regards,
Mike Yin
TechNet Community Support

Not able to drill down S_ALR_87013558 in reports

Hello Experts,
I am in strange situation where in I am not able to drill down my budget report S_ALR_87013558 in my development client. But it is working fine in production client.
What could be the reason.?
Please suggest.
Thanks,
Kumar Srinivasan

Hi Kumar,
Follow below steps in sequence.
1. Please execute CJE2.
2. Double Click on report 12KST1A. Message will come "You are changing an SAP delivery object". Press the tick mark.
3. On Output Type tab, you must have clicked on radio button "Graphical Report Output". Please change the radio button classical drilldown and check "Available on Selection Screen" at the buttom.
4. Save it.
Check your report again and you will have an option there.
Regards,
Amit

Bubble Chart drill down issues

I have a filter and a bubble chat with 7 series. The chart is showing up bubbles with different size and colors as per the settings when I chnage the filter
The problem is with drill down
I want to drill down to a Bar chart when I click on bubbles. Each bubble click will drill down data into that bar charchart as a pop up. I know how to do it as I have done it in the past with other components.
But when I use drill down with bubble chart, I have to assign separate destination area for each series which makes it difficult to drill down into a chart. What i want is the bubbles to drill down data into a single row so that I can map the Y-axis of chart component to that row and X axis as fixed labels. But I am not able to do that. Moreover once inserted there is no way to clear the destination cells.
However if I use data in range options in bubble chart then I can use drill down as I get only one series in that case. But that method also has limitations.
1. I am not able to display series name on the bubbles. It doesn't make any sense to show bubbles without any labels.
2. All bubbles are of same color.
Is it possible to overcome above two limitations when using data in range option?
Thanks

Hi Tarun,
as a workaround you could define a special area as mapping area for the X-Y-chart.
This area is filled via excel formulas from the bubble chart drill down destinations. You can concatenate the values from the drill down target areas, like "=A4&A5" etc. Make sure to clear all cells except the actual drill down target cells.
Hope this helps,
best regards
Heiko

PIE Chart Drill down in bex report

Similar Messages

Maybe you are looking for