Pie chart legend showing digit "1" when we set "ignore blank cells"property

All,
We have pie chart in Xcelsius 2008 that shows the data with legend value and we have also set the ignore blank cells property to ignore the blank value from column. but once we set this property, it displays the digit "1" in the legend when there is no data.
we are expecting that nothing should be displayed in pie chart legend when there is no data for the pie chart.
Thanks,
Sourabh

hi Sourabh,
I could replicate your scenario.
Workaround is to create a duplicate of this chart. Go to properties of this new chart.
Go to Appearance ->
Uncheck
- Legend
- Mouse-over values
- Data Labels
for this chart.
Write a logic in excel using 'IF' to verify if your data is empty.
Use 'Dynamic Visibility' feature to display this chart only when your data is empty.
Display your original chart if your data is not empty.
Regards,
Vamsee

Similar Messages

Pie Chart legend text when drill down too larger

Dear Gurus,
I have this report with Pie chart:
*)Table:
Element Group
Earnings 100
Deductions 30
When drill down (after click on Earnings/Deductions), it become detail like this:
Element Group Classification Name
Earning Regular
Earning Irregular
And the Pie chart legend show this: Earnings, Regular Earnings
->how to remove Earnings?I just want to show classification name as legend.
I use OBIEE 11.1.1.3
Any help will be appreciated
Regards
Joe
Edited by: JoeSSI on Aug 10, 2012 12:33 AM
Edited by: JoeSSI on Aug 10, 2012 12:35 AM
Edited by: JoeSSI on Aug 10, 2012 3:24 AM

Hi Joe,
There was a bug associated with repeated legends in 11.1.1.3 version.Can you check the below document and see if the mentioned patch helps,
Vertical Bar Charts In OBIEE 11g Display Repeated Labels In The Graph Legend [ID 1376185.1]
Regards,
Dpka

PIe chart to show parts of a whole

Hi,
I am trying to create a pie chart that shows students the number of successful class periods out of a total number of 70. I have a column displaying the number of successful days at the end of the trimester, but don't know how to "tell" the pie chart how many days are possible.
Any help on this would be appreciated!
Thank-you,
Dave

Hi Dave,
Enter the number of possible days in the table?
What Numbers needs to construct the chart, though, is the number of 'successful' days and the number of 'unsuccessful' days. Given those two data, Numbers will automatically construct the chart showing each as the correct fraction of the whole (pie). The Chart format inspector will give you several choices of how to label the segments, including 'percentage.'
At the end of the trimester, when all possible days have passed, the number of 'unsuccessful' days is 'possible' days - 'successful' days, and 'possible' days is a fixed number.
If you want to use the chart within the term, you need to decide whether you want a chart that shows the 'successful' days as a percentage of ALL possible days (Chart 2), as a percentage of the possible days up to the current date (Chart 1), or to add a third category, 'days to come' (Chart 3).
Each chart uses the data indicated by the legend under the chart.
Formulas for table 2 (For Chart):
B2: =COUNT(Main::$A)
B3: =COUNTIF(Main::$A,"<"
Column A on the Main table has two conditional format rules applied:
Equal to A2: (yellow fill)
Greater than A2 (grey fill)
Regards,
Barry
EDIT: I see I neglected to recalculate the day numbers after adding a second header row. Oops! With corrected numbers, today is day 15, and charts show results to end of day 14. Formulas listed are not affected.
Message was edited by: Barry

Pie Chart legend label icon

Hi, is it possible to change the label icons of a Pie Chart legend? I have a pie chart with genre distribution % and would like to set the male and female genre icons instead of the color.
Thank you

Hello Pedro,
in general you can' t change the label icons in SSRS - I assume you mean with "label icons" the small colored rectangles indicating each of the sections in a pie chart. But I have a workaround for you: Simply not to use the build-in labeling mechanism
of the chart, but to create an individual textbox with the needed symbols for your purposes. In that textbox you have to set an expression for showing the needed male or female symbols as Unicode-chars. There's a text function for that, I mean something like
"=ChrW(&XXX)" is the appropriate expression. XXX has to be the character string of the Unicode-chartset, if you want e.g. the male symbol as an icon. Unfortunately, I can't post links, but it's quite easy to find via Bing or Google the needed
chars or signs in the Unicode-Table (use e.g. "Unicode table" as search string and you find a great site for retrievaling chars and symbols in the Unicode-Table).
Generally spoken, I wouldn't use pie charts at all, normally bar charts are the better choice in visualizing data - with bar charts it's easier to recognize skales than in a pie chart and you can often label bars in a direct way, so you don't need an extra
legend.
I hope I could help you, but feel free to ask me, if yo have further questions
Robert

Sorting Pie Chart Legend

I am using Crystal Report XI. I created a pie chart that shows the number of vehicles stolen by the day of the week. The problem is that the legend is sorted in alphabetical order. It starts with Friday - Monday - Saturday - Sunday, etc.
I need to be able to start with Sunday - Monday - Tuesday - Wednesday, etc.
Can you help me figure out how to sort or revise the legend of a pie chart? Thanks in advance.

Yes, I would be most happy to help someone. Right Click in your pie chart. Choose Chart Expert. Choose the Data Tab. Click on the item you have in the upper right corner of the dialog box. For me, it is Event Day. With that highlighted, the "order" option below it will turn on. You will be given some choices - I chose "Specified Order". Then choose the Specified Order tab, and type in the order you want. I typed Sunday, Monday, etc.
Hope it helps.

CRVS2010 Beta 2 Pie chart legend displaying "_e_Total:1_n_pseudoloc_"

Instead of displaying "Total" at the bottom of my pie chart legend I am getting the following text: "_e_Total:1_n_pseudoloc_"
The values and percentages calculate correctly, but the label is unusual.

Hello,
I have the same problem with my pie chart. My report was fine before I did my update to CRVS2010 Beta 2. I was using crystal report 11.5.
My report is really simple. I have a resume chart that you can drilldown. Each drilldown show the same chart for the selected
item.
I'm using Windows 7 Professionnel 64 bit in french (canada version).
Visual Studio Version 10.0.30319.1
Framework 4.0.30319

Xcelsius - Embedded 'Jpg' logo not visible, Pie chart Legends not visible

Hi,
   I am new to xcelsius. could you please help.
   I have two issues.
1. I incorporated Logo (JPG FILE) and selected options Embed file, resize image to component, but image is not visible when I preview. Why? What needs to be done to make logo visible in preview(swf file). I did not export yet to Infoview though.
2. Legend values are cropped. I have 35 legends that are to be listed for pie chart. I can see only 31 and remaining four not visible (two from beginning, 2 at the end). I reduced font to lowest visible value i.e. 8 and increased height max possible that looks good . How to make them visible? or make them to fit to chart. Is there any option? Legend values are towards right of chart.
Please help.
BR, Nanda Kishore

Hi,
   Are you using Image Component to insert your JPEG, if not try that. It will work as expected.
   As for your pie chart legends, it will work as long as your Pie Chart is large enough to fit all regions onto the screen.
   Try a simple test just to prove that concept.
      - Create 2 columns in Excel
      - Make Column A your Region Column. Insert up to 35 records
      - Make Column B you Data column. Also insert up to 35 records.
      - Now map your data into the Pie Chart and make sure you reduce the fonts of the region to "8" (Smallest it can go)
      - Preview it.
Ken

Pie chart legend should display values and percents

Hi All,
Can any body suggest me how to display values and percent in pie chart legend.Thanks in advance.
Edited by: 997414 on Apr 1, 2013 11:25 PM

Hi,
I used this tag : <SliceLabel textType="LD_TEXT_PERCENT"/>
My full graph;
chart:
<Graph depthAngle="50" depthRadius="8" pieDepth="30" pieTilt="20" seriesEffect="SE_AUTO_GRADIENT" graphType="PIE"><LegendArea visible="false" automaticPlacement="AP_NEVER" position="LAP_BOTTOM" /><LocalGridData colCount="1" rowCount="{count(.//DSYATIRIMDAGILIMANA_ROW)}"><RowLabels><xsl:for-each select=".//DSYATIRIMDAGILIMANA_ROW" xmlns:xsl="http://www.w3.org/1999/XSL/Transform"><Label><xsl:value-of select="RAPORAD" /></Label></xsl:for-each></RowLabels><DataValues><xsl:for-each select=".//DSYATIRIMDAGILIMANA_ROW" xmlns:xsl="http://www.w3.org/1999/XSL/Transform"><RowData><Cell><xsl:value-of select="ORAN" /></Cell></RowData></xsl:for-each></DataValues></LocalGridData>
<SliceLabel textType="LD_TEXT_PERCENT"/>
</Graph>
I hope, It helps you since I figure it out in very very hard way.
This is the main reference : http://www.oracle.com/technetwork/middleware/reports/graph-dtd-technote-2-094743.html

Pie chart legend options

I have a spreadsheet with "expense categories" in one column and "dollar figures" in the second column.
When I highlight the columns and create a chart I DON'T want to have to use "show legend" (with the color circles at the bottom) as it repeats my expense categories and just takes up space.
What I want is what shows up with I click on the pie chart. When I do that, it changes my spreadsheet and shows the corresponding colors to the left of the categories.
Is there a way to have my spreadsheet legends show up like in the picture below to the left? It goes away the minute I click off the pie chart or try to print.
Thanks in advance.

See if this gets you started
http://dl.dropbox.com/u/54961502/For%20Apple%20Forums/Legend%20in%20Table.number s
I put the legend in a separate table that consists of a single column. The column contains formulas that refer to the data table (Table 1). The formulas are not affected by sorting the data table, you can sort it all you want and the legend will be correct. I filled each cell with color and used conditional formatting to make it white text on a white background if there is no header text for that row. I also made the borders white so they would blend into the page. Add text in one of the empty rows of the data table and you'll see how it acts.
Notice that a pie chart has only six different colors, then the colors repeat. You can modify that but you'll also have to modify what I did by changing the legend cells to the the new colors. I changed the colors by turning on the legend, using the magnifying glass in the Color window to get the color, then drag/dropping the color on the cell. I do not know how many different colors you can use.
I recommend locking the legend table so it cannot be modified by the user.
I recommend turning Wrap off in the data table. If text wraps it makes the row taller which will cause the legend and the table to become misaligned. Changing the font, changing rows sizes manually, or moving the table will do that too.
I recommend locking the chart so it cannot be modified by the user.

Pie Chart -- legend texts are cut (with "...")

Hello Experts,
when I*m using pie charts with displaying the legend, longer texts are cut (e.g.: "220/35V 60W yellow...")
What can I do to show the complete text?
Thanx a lot
KR,
Raimund

Good Day Nics,
the cuts are due to the size of the pie chart. you can resize your pie chart for the legends to show properly.
Kindly tell me if im missing something.
Regards,
John Vincent

Pie Chart Legend not displaying full names

Hi All,
In a RTF template, we have displayed a PIE chart. In the PIE chart, when the number of legends are more, the legends are getting truncated on the generated PDF report. The document which describes the issue with screen shots is placed at [http://www-apps.us.oracle.com/~sgnanama/Pie%20Chart%20Legends%20Display%20Issue.doc] . And following is the snippet of code placed at ALT text of PIE chart picture present in the template. Is there any way to enlarge the legends display section to show the full text of the legends? Please share your thoughts. Thanks.
chart:
<Graph graphType="PIE" depthAngle="50" depthRadius="8" pieDepth="30" pieTilt="20" seriesEffect="SE_NONE">
<LegendArea borderColor="#cccccc" borderTransparent="false"/>
<LegendText wordWrapEnabled ="true"/>
<SeriesItems defaultBorderColor="#cccccc">
<Series id="0" color="#336699"/>
<Series id="1" color="#99ccff"/>
<Series id="2" color="#999933"/>
<Series id="3" color="#666699"/>
<Series id="4" color="#cc9933"/>
<Series id="5" color="#6666"/>
<Series id="6" color="#3399ff"/>
</SeriesItems>
<Title text="" visible="true"/>
<Footnote text="Company Contribution" visible="true" horizontalAlignment="CENTER"/>
<O1Title text="Company Contribution" visible="true"/>
<LocalGridData rowCount="{count(CATEGORY/ERC)}" colCount="1">
<RowLabels>
<xsl:for-each select="CATEGORY">
<xsl:if test="string(ERC)">
<Label>
<xsl:value-of select="CATEGORY_NAME"/>
</Label>
</xsl:if>
</xsl:for-each>
</RowLabels>
<DataValues>
<xsl:for-each select="CATEGORY">
<xsl:if test="string(ERC)">
<RowData>
<Cell>
<xsl:value-of select="ERC"/>
</Cell>
</RowData>
</xsl:if>
</xsl:for-each>
</DataValues>
</LocalGridData>
</Graph>

as far as i know only way to display legname in full when u have more values is to make the size of the chart large . i have one the req like that i made it large enough so that it will withstand if i get more values .
it may not be good idea but this is the way i did .

Pie Chart Legend - colors and sorting value

Hi,I have a pie chart with around 20 'segments' representing names of people - so it looks like several of them have the same color.So my first question is do the standard 12 colors repeat after 12 segments have been 'defined' - can this be extended with custom colors?. I know you can set colors for specific values but as the list is dynamic, I can't do that. I also have a legend defined which shows the person's name and then the value - either a percentage or a count etc. From top to bottom, the legend lists the entries alphabetically by the person's name - however, it's not always easy to tell which name is associated with which 'segment' and using labels is not an option as they are too long and there are too many of them to be readable So what I would like to do is have the legend displayed in numerical size order - e.g. person with largest % is at the top, smallest % is at the bottom etc.I've been looking at the Chart Expert, CR Help and the forums but have not seen an answer to either question - I'm hoping someone can tell me if it's possible or not (and if so, how do I do it!).Thanks 

Hi,
If you go to the Chart Expert, on the data tab, you can choose the Top N option.Â From within there you can get your legend sorted based on the highest or lowest percentage.Â You can also group information so that you only see the top 5 or lowest 10 or whatever you want.
Also when I create a pie graph based on 20 plus pieces of data it isn't resusing the colors, but they are somewhat similar. I usually do a group of the top 10 or so, then have an others category for situations like this.Â
Rody

Pie chart: Legend position

By default, the SVG pie charts that HTML DB renders show all the legends in a box off to the side of the pie.
Is there a way to show each legend next to the slice that it corresponds to?
Thanks

Bump. Thanks.

Pie chart legend summary bug, weird text being printed

Hi guys, I created a simple report with a Pie Chart on VS2008 and on my computer the chart legend displays all items perfectly but when I deploy it on our web server the legend summary, which is always 100% doesn't say "Total" anymore but a weird text, have you seen this before? Here's a sample.
On my machine the chart legend is the following:
ITEM1                                35.0%    63
ITEM2                                38.3%    69
ITEM3                                26.7%    48
Total                                  100.0% 180
On the server:
ITEM1                                35.0%    63
ITEM2                                38.3%    69
ITEM3                                26.7%    48
eTotal:1_n_pseudoloc_   100.0% 180

Have not seen this before, but do apply SP1 on your dev computer:
https://smpdl.sap-ag.de/~sapidp/012002523100009351512008E/crbasic2008sp1.exe
Recompile.
And use SP1 runtime:
https://smpdl.sap-ag.de/~sapidp/012002523100010010692008E/crredist2005_sp1_x86.zip
See if that helps.
Ludek
Follow us on Twitter http://twitter.com/SAPCRNetSup

Pie chart legend total does not calculate correctly

Hi All
I have a pie chart in a CR 2008 report (SP0).
The pie has one "On Change Of" and one "Show Value" field.
The datasource for the report is an Oracle 10g (Rel 2) Stored Procedure (SP).
The SP signs the value per each transaction (record), so if the txn is a reversal is will arrive in the report as a negative value
The records that are listed in the report have the correct sign on each line, and totals in the report are correct
So, if the first record has a value of 10,000 - these would be known as Cash txns
and the second record has a value of -5,000 - these would be known as Cash Reversal txns
The report total will be 5,000
In the legend entry of the pie chart the values per series are being displayed correctly. There is a series per Txn type (so one series represents Cash txns, the second series represents Cash Reversal txns)
From the example above my pie shows 1 txn for Cash @ 10,000
and 1 txn for Cash Reversal @ -5000 (it has the negaitve amount in brackets)
But the total in the legend is 15,000
I cannot figure out why that the legend total is not calculating correclty.
Has anyone seen this behaviour before?
Any help would be great thanks
Best regards
Patrick

Just realised why.... The total is counting all txns, and my formula is not telling it that Reversal should be subtracted - duuhhhh!!!!

Pie chart legend showing digit "1" when we set "ignore blank cells"property

Similar Messages

Maybe you are looking for