Pioneer 8400 DVD receiver player, as iPhone ios6 update now when connecting the new iPhone with ios6 via blutooth (firmware prob) to my car DVD 8400 unit, when playing music such as on my phone or Pandora the track button does not function or work at all

pioneer 8400 DVD receiver player, as iPhone ios6 update now when connecting the new iPhone with ios6 to my car DVD 8400 unit, when playing music such as on my phone or Pandora the track button does not function or work at all not even if i press skip track forward or back on the unit it doesn't function everything works except that. on listening to radio or anything else related not pairing thru Bluetooth unit works fine, seems there to be Bluetooth update that is not making iPhone and unit not compatible at all. does pioneer need fix this problem with update firmware or thru apple need help. my iPhone was working fine before with previous ios 5 before.

Dear Valued Pioneer Customer:
We would like to inform you of the availability of an optional Bluetooth® firmware update (HW05-SW01.27.20) that enables Bluetooth AVRCP control and metadata display from a compatible Pioneer CD or DVD Receiver when used with an iPhone® 5 or iOS 6 device.  If you do not own an iPhone 5 or iOS 6 device, there is no need to install this update.
This firmware update may be used only with the following 2012 Pioneer products:
CD Receivers
DVD Receivers
DEH-P8400BH
DEH-P9400BH
DEH-80PRS
AVH-P2400BT
AVH-P3400BH
AVH-P4400BH
AVH-P8400BH
In order to perform this update, the following items are needed:
A Pioneer CD or DVD Receiver above with built-in Bluetooth
Laptop with built-in Bluetooth running Windows® 7
Bluetooth firmware update (HW05-SW01.27.20)
How to Obtain the Free Firmware Update
1. Download the INSTRUCTIONS for the optional Bluetooth firmware update (HW05_SW01.27.20).
2. Download the UPDATE FILE to a computer and transfer the file to a compatible 2012 Pioneer CD or DVD Receiver via a Bluetooth-enabled Windows 7 laptop.
You can also arrange for Pioneer to update your 2012 Pioneer CD or DVD Receiver by calling Pioneer Customer Service toll free at 800-421-1404 during regular business hours (M-F 10AM-7:30PM Eastern Time, except on holidays). If this firmware update is performed by Pioneer, there is a charge of $60.00 (this charge includes return shipping of the updated unit within the U.S.). Charges for removal/reinstallation of the unit and shipment to Pioneer are the customer’s responsibility.
How to Determine if the Firware Update has Already been Installed
CD Receivers:
• With the unit turned off (press and hold the source button until the CD Receiver turns off), press and hold the center of the volume knob to bring up the Settings menu → rotate the volume knob until "BT Version Info" is displayed and then press the center of the volume knob → The firmware version should show HW05-SW01.27.20.
DVD Receivers:
• With the unit turned off (press the home button and select ‘OFF’ from the source icons), press the home button → Press the “System” icon at the bottom of the screen → Select the “Bluetooth Version Info” option → The firmware version should show HW05-SW01.27.20.
If the Bluetooth firmware version shows HW05-SW01.27.20, no further action is necessary.
Questions
If you have any questions, please contact the Pioneer Customer Service Center toll free at 1-800-421-1404, Monday through Friday, 10:00 a.m. to 7:30 p.m. (Eastern Time), except on holidays.
Sincerely,
Pioneer Electronics (USA) Inc.

Similar Messages

  • Phone won't charge home button does not work

    iphone won't charge home button does not work

    Glad it worked. Anytime your iPad acts up, the reboot/reset is a common first thing to try. And it clears up many issues and glitches.
    enjoy your new toy

  • I need to hard reset a Palm TX but the Power button does not function.

    I need to hard reset my Palm TX but the Power button does not function. Is there any other way to perform the hard reset or otherwise delete all of my data?
    Post relates to: Palm TX

    Hi,
    PowerBtn from the Canuck Software HomePage.
    NOTE: This is Not a Blazer friendly download and only for downloading using a Chunky Computer thingie.
    http://www.canuck-software.ca/
    PowerBtn will allow you to set a HardButton to turn the TX on and off in the same fashion as the PowerButton, if you want.
    This setting will remain active while 'Enable' on the PowerBtn screen is active.
    The user can select 'Disable' on the PowerBtn screen.
    The setting will survive a Soft Reset. (Hi PG )
    If the Palm PowerButton fails completely then you will not be able to do a Hard Reset.
    The PowerBtn app has a 'Hard Reset button' which you tap and after a time countdown (you can cancel in this time) it will perform a Hard Reset. This is the same as the Hard Reset app mentioned above.
    The 'Enable' and 'Disable' mentioned above do not affect the 'Hard Reset button'
    NOTE: PowerBtn also has a 'Program itself becomes power button' feature but I do NOT recommend you use this.
    If you enable this you will not be able to change the setting or use the 'Hard Reset button' because when you Tap on the PowerBtn Icon the TX will turn Off. The only way to change the setting or use the 'Hard Reset button' would be to Delete PowerBtn then install again.
    You can also turn your TX On by pushing the 5WayNav Select (middle button) to bring up the clock then double push it. The TX will stay on at the same place it was in when you turned it off, in the same way it would if you used the Power Button
    All the best, woz of oz
    Post relates to: Palm TX

  • Password Remember Button does not function; Can't input 3rd Party Passwords for Social Networks/Emails.

    My "Remember" button doesn't work. Simple as that. The "Not Now"
    Button still works, and closes the pop-bar. Remember doesn't do anything.
    [Exception... "'User canceled master password entry, login not added.' when calling method: [nsILoginManagerStorage::addLogin]" nsresult: "0x8057001e (NS_ERROR_XPC_JS_THREW_STRING)" location: "JS frame :: file:///C:/Program%20Files/Mozilla%20Firefox/components/nsLoginManager.js :: anonymous :: line 445" data: no]
    Occurs when trying to input 3rd Party extension passwords.
    I have no master password set, I have also read the "Password not remembered topic", and it didn't help.
    Error Console yields this:
    "'''Warning: The 'charCode' property of a keyup event should not be used. The value is meaningless.
    Source File: https://support.mozilla.com/en-US/questions/new?product=desktop&category=d6&search=Password+Remeber+Button+does+not+function%3B+Can%27t+input+3rd+Party+Passwords+for+Social+Networks%2FEmails.&showform=1#question-form
    Line: 0'''"

    Okay, I have started Firefox in Safe Mode, and the Remember button still didn't work. After checking the error console, It had the following message again:
    "Error: uncaught exception: [Exception... "'User canceled master password entry, login not added.' when calling method: [nsILoginManagerStorage::addLogin]" nsresult: "0x8057001e (NS_ERROR_XPC_JS_THREW_STRING)" location: "JS frame :: file:///C:/Program%20Files/Mozilla%20Firefox/components/nsLoginManager.js :: anonymous :: line 445" data: no]"
    After I Evaluated it (In the error console) it gave me a slightly different version:
    "Error: missing ; before statement
    Source File: javascript:%20Error:%20uncaught%20exception:%20[Exception...%20"'User%20canceled%20master%20password%20entry,%20login%20not%20added.'%20when%20calling%20method:%20[nsILoginManagerStorage::addLogin]"%20%20nsresult:%20"0x8057001e%20(NS_ERROR_XPC_JS_THREW_STRING)"%20%20location:%20"JS%20frame%20::%20file:///C:/Program%2520Files/Mozilla%2520Firefox/components/nsLoginManager.js%20::%20anonymous%20::%20line%20445"%20%20data:%20no]
    Line: 1, Column: 8
    Source Code:
    Error: uncaught exception: [Exception... "'User canceled master password entry, login not added.' when calling method: [nsILoginManagerStorage::addLogin]" nsresult: "0x8057001e (NS_ERROR_XPC_JS_THREW_STRING)" location: "JS frame :: file:///C:/Program%2"
    I read the Troubleshooting extensions & Themes, but It didn't help.
    When I tried to read "http://kb.mozillazine.org/Password_Manager" I get a page that says:
    "ERROR
    The requested URL could not be retrieved
    While trying to retrieve the URL: http://kb.mozillazine.org/Password_Manager
    The following error was encountered:
    * Connection Failed
    The system returned:
    (110) Connection timed out
    The remote host or network may be down. Please try the request again.
    Your cache administrator is root. "
    Also, this error occurs in ALL 3rd Party extensions. It can't log me into E-Mail accounts, Facebook, Twitter, anything. The error message has a window title of [JAVASCRIPT APPLICATION] if that says anything.

  • My Home button does not function . this happened several times before but now its completely stalled . Kindly advice please

    My Home button does not function . this happened several times before but now its completely stalled . Kindly advice please

    I would take it into apple and see if they can fix it or replace your phone.

  • My home screen button does not function

    My home screen button does not work, it feels like it is pushed in all the time.

    Try:
    fix for Home button
    iPhone Home Button Not Working or Unresponsive? Try This Fix
    - If you have iOS 5 and later you can turn on Assistive Touch it add the Home and other buttons to the iPods screen. Settings>General>Accessibility>Assistive Touch
    - If not under warranty Apple will exchange your iPod for a refurbished one for:
    Apple - Support - iPod - Repair pricing
    You can do it an an Apple store by:
    Apple Retail Store - Genius Bar
    or sent it in to Apple. See:
    Apple - Support - iPod - Service FAQ
    - There are third-party places like the following that will repair the Home button. Google for more.
    iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens

  • Photoshop 5 edit menu button does not function

    The edit menu button does not load the edit page on my Photoshop 5 program. I tried deleting the program and reloading from the disc. I am getting nowhere with that and now I get a message saying that I have use the disc on too many computers.. jjmack answered my earlier question regarding the same issue with a request for more information about the edit menu button.
    Harold Bergh

    1. Restore requires replacing everything I had on my iPod, right?
    2. Do you do anything else other than reply to Discussions, or is there a reward for having this many posts?
    3. The problem resolved itself after having been turned off for twenty-four hours.

  • My ipad2 volume increase button does not function

    My ipad2 volume increase button does not function

    Do you have a question or are you just letting us all know? :-)
    Have you dropped your iPad or perhaps damaged the button in some way?

  • I dropped my IPhone 6 plus in water and now the power button does not want to work

    So i had the Iphone 6 Plus in my hand when it feel into a big puddle and it was in there for more than a minute so i come home and i find out that the power button (on the right hand side button) doesn't want to work like its on and im on the home page and then i press the button and nope nothing and the volume button somewhat works and sometimes the power button works so i turn it off and i put it in the rice next thing you know the phone turns on again without me touching it or anything. So I need help and the phone is new not even a month i have had it and i don't want to spend money on it. Please help! This phone is my life and i will do anything(that does not wast money) to save my phone.

    You can try leaving it in that bag of rice for 5-7 days to see if it will dry, however if it will not stay turned off, I would say that something is shorted out. You will need to make an appointment at the Genius Bar of the nearest Apple Store or Authorized Apple Service provider and be ready to pay for an out of warranty replacement. If you purchased Apple Care Plus there is only a deductible, but without it, you will have to pay the price of an out of warranty phone. User damage is not covered under warranty.

  • TS3274 In my iPad's Photo folder, after I select edit, and apply check marks to specific photos, the red 'Delete' button does not function.  How do I correct this issues?

    To anyone familiar with iPad 2s,
    After I select the Sunflower Photo icon and touch 'Edit', apply check marks to specific photos I want deleted, the red 'Delete button doesn't function.  How do I correct this?
    Thanks

    The links below have instructions for deleting photos.
    iOS and iPod: Syncing photos using iTunes
    http://support.apple.com/kb/HT4236
    iPad Tip: How to Delete Photos from Your iPad in the Photos App
    http://ipadacademy.com/2011/08/ipad-tip-how-to-delete-photos-from-your-ipad-in-t he-photos-app
    Another Way to Quickly Delete Photos from Your iPad (Mac Only)
    http://ipadacademy.com/2011/09/another-way-to-quickly-delete-photos-from-your-ip ad-mac-only
    How to Delete Photos from iPad
    http://www.wondershare.com/apple-idevice/how-to-delete-photos-from-ipad.html
    How to: Batch Delete Photos on the iPad
    http://www.lifeisaprayer.com/blog/2010/how-batch-delete-photos-ipad
    (With iOS 5.1, use 2 fingers)
    How to Delete Photos from iCloud’s Photo Stream
    http://www.cultofmac.com/124235/how-to-delete-photos-from-iclouds-photo-stream/
     Cheers, Tom

  • Officejet 4622, new printer today. black does not seem to work at all but all the colors do.

    I print a test page through diagnostic tool and black square is blank. I cannot tell if the alignment prints properly as I have no example of what it should look like to ensure it is correct since the alignment fails to detect the alignment page. Scans work fine. I tried cleaning the print heads and still don't seem to get black to work correctly. This is a new printer purchased today 9.30.2012.

      just in case anyone else encounters this problem, heres whats really going on and heres how to fix this annoying issue. its relatively easy to do and more efficient than wasting money on a new printer or having it repaired  like most people end up doing.
         whats going on? the ink has clogged the printing heads and has solidified shut. the "clean print heads" feature the printer came with does not have the ability to fix this. that feature is to clean up dirty heads, not clogged heads. why hp decided to make this model without a simple to remove cradle is beyond me, but fortunately the cradle DOES come out and can be cleaned with hot water.
         theres a few items you will need to make this happen the easy way or you could just break out the tree limb loppers, like i did, and vent your frustrations.
         what you will need: a pair of needle nosed pliers, a T9 torx screwdriver head ( auto parts stores sell them for a couple bucks), some paper towels and an area to work (its easiest to do this in a corner of a room, on a small table or the floor).  keep in mind you are dealing with ink, so change out of your good clothes just in case and also grab a paper plate or a few sheets of printing paper to set the ink cartridges on as you work.
         1)  ok. lets get started. !!!FIRST UNPLUG THE PRINTER RIGHT NOW, SO YOU DONT ACCIDENTALLY DIE BY ELECTROCUTION!!!  i forgot and when i began unscrewing the first 6 screws, the chime kept going off and im like **bleep**? i was impressed by the safety measures hp took while engineering this model. 
         2) the printer is now unplugged and then go to your corner work area and place the printer so there is a wall or barrier on its left and also a wall or barrier behind it. do this while facing it as if you were about to use it.
         3) now, what you have to do is open the printer like you are going to change the ink and on the right side there is a plastic guide that prevents the top from opening all the way. look on the side and you will notice it could pop off with your fingers. pop it off and open it all the way open so you could get at the screws the lid would have prevented you from accessing.
         4) lean the scanner portion and top portion against the back wall.
         5) all screws you will be removing are size T9H torx screws. there are ten total. there are 2 black screws in the front top and then 4 black screws in the back top. remove them and put them on your paper plate.
         6) next is 1 short silver colored screw located under the control panel, use your finger and feel around  beneath the  *  button. unscrew it, put it on the paper plate.
         7) next you are going to remove the face/control panel to get at the last 3 screws so locate the little illustrations on the top of the printer, there are 2 on the bottom left and 5 on the bottom right (1 and 2 on the left explain paper jam removals and then 1-5 on the right explain changing ink cartridges). then about half an inch south of the number 5 illustration, on the lip, is a plastic bracket. six inches to the left is another one then 6 more inches to the left, under the illustration number 2 (paper jam removal) is a third bracket. undo them using your fingernails. and just flip it up like car hood and then lay it down on the main top portion of the printer, minding the flat wire which is connected into the circuit board of the control panel (if the flat wire popped out because you got too rowdy on it, then simply insert it back in when you reassemble).
         8) next, unscrew the 3 longer silver screws which are located under the panel you just popped off. there is 1 on the left and 2 on the rightish side. toss em on the paper plate.
         9) now that all the screws are removed, take the face panel and partially pop it back together.
         10) then take the whole top ( the part with the little illustrations and lift it like a car hood, ONLY THIS TIME OPEN IT TO THE LEFT and balance it on the edge of the printer, leaning it towards the wall or barrier on your left. BE CAREFUL NOT TO YANK ON THE FRUIT STRIPE COLORED WIRES ON THE LEFT AND ALSO THE BLACK FLAT WIRE THAT CONNECTS THE SCANNING PORTION TO THE MAIN PORTION OF THE PRINTER. 
        11) next grab the needle nose pliers and remove the 2 silver colored tension springs located behind the printer cartridges. pay attention where they were attached so you remember where they go during assembly. take a pic with your phone if you have to or simply re-figure it out like i did. toss em on the paper plate.
        12) then disconnect the 2 large flat wires and 1 small flatwire attached to the back of the ink carriage. take a picture or remember like i did. i imagine bad things may occur if you reverse them on re-assembly. grab the phone and take a quik pic to be sure. 
        13) now remove the ink carriage, cartridges and all, by lifting the front first.  be careful of the little transparent ribbon in there that moves the carriage left to right and vice versa. you dont want to damage that little guy. now take the carriage to your paper plate. dont drip any ink or accidentally get it on your fingers without knowing or you will make a mess.
        14) remove the ink cartridges and set them on the paper plate, ink side up to avoid a mess, these things sometimes drip. set the plate off to the side. its time to clean the print heads.
        15) then go to the sink, with the empty ink carriage and turn the water on hot and then just let the empty ink carriage sit there with the water mainly going through the screen of the clogged color (inspect and make sure there isnt a little rubber gasket surrounding the little screen if there is dont lose it. i didnt look too closely and i dont think hp has them but i know some other printers do). it wont stain the sink but wash down any ink as it comes out to be sure. also notice there is a small circuit board attached to it. dont bang it up but getting it wet doesnt matter.
        16) keep doing this until the water runs clear. 
        17) then use your finger and rub the screen gently with your finger and then rinse it, washing away the ink until the water runs clear. continue this until there is no more ink and the screens are clean. do it to all the colors just for good measures. the problem color that wouldnt print, you will notice takes longer to clean than the other colors.
        18) now look on the bottom side of the carriage. those wierd looking things are the heads. rinse them with hot water and wipe them with paper towels. then flip it over and blast the screen side again. also in between the screenside and the heads (on the side of the carriage) is an opening that is also probably gunked up. blast it with water too. then flip it over and wipe the heads again. repeat this step until nothing wipes away or until you are sick and tired. 
        19) shake off then use paper towels to dry the entire unit. make sure the unit is dry.  especially inside the female plugs. blow in it or break out the hair dryer and gently dry it. dont sit there and melt it though with the blow dryer. but the sooner it dries the less likely your ink cartridges sitting on the paper plate will dry out. the ink wont dry out fast just dont take a nap or go out on a date until you are reassembled with the ink portion.
        20) now you have completed the cleaning of the heads and probably wont need to do this again for the length of time it was since you bought the printer. and just like a roadtrip you used a map to navigate, you will use these instructions in reverse for re-assembly. but keep in mind when re-inserting the 3 flatwires you disconnected from the back of the ink carriage, make sure you have the little metal contact points on the flatwires (male side) inserted so they touch the little metal contact points on the carriage plugs (female side). ALSO BE EXTRA CAREFUL NOT TO DAMAGE THE BLACK FLATWIRE CONNECTING THE SCANNER PORTION TO THE MAIN PRINTER PORTION. THERE IS A LITTLE GROOVE IN THE PLASTIC WHERE IT CAN BE SEATED TO GUARANTEE NO CRIMPAGE. USE IT. also make sure the 2 hinges of the scanner portion/lid are seated properly before fastening the the top with the 6 black screws.
         now re-assemble the printer and reinstall the ink cartridges. and then plug in the unit, and turn it on.  if you get any notifications on the control panel saying the carriage wont move, then open the hood and take out the ink cartridges, push around and make sure the carriage is seated properly and that the tensioner springs are in place properly. repeat if neccesary until notifications go away or just do a test print and disregard the notification if you messed with it already a few times. thats what happened to me and the notification went away on its own. once its online, open the hp utilities and press the "clean the heads" button. do it 2x in a row and you will be back in style, with extremely rich and bold colors and yes, raven black print.
    p.s.  
         you can always take your aggressions out with the tree limb loppers or the tin snips like i did and snip out the center plastic that prevents you from taking the carriage directly out. this eliminates disassembly and re-assembly entirely. just make sure you DO NOT CUT THE TRANSPARENT RIBBON THAT MOVES THE CARRIAGE BACK AND FORTH. this way the next time it happens it only takes you 10 minutes before you are up and printing. 
    enjoy!  -  Porf

  • Phone does not ring but works in all other ways.

    Hi All,
    I have a quad set of BT7600 phones, and for some reason these have stopped ringing. This has been like this for a couple of months but I've been away so we have relied on mobiles for this time.
    When I say 'stopped ringing' I mean just the noise - the phones show the caller display fine and you can answer the phone and speak to the caller if you see the incoming call - just no ring tone. Outgoing calls and ansaphone messages are also still fine.
    I have BT infinity with the filtered socket - I have removed the faceplate and connected my master phone into this with the same result, everything fine except ringtone. I have also tried another cordless phone at the test socket with the same result (Eurotel elite 2825).
    Any ideas how I can get this checked out? I'm pretty sure it must be wiring/settings fault outside the house because I've tested with 2 different phones at the master test socket.
    Please don't ask me to call the indian no-help-line. I love my BT products, but over the years I've had so many lies and rubbish from them that if they are the only recourse to resolving the problem then I'll move to talk-talk or whoever - even if the service is inferior as long as it doesn't involve BT India.
    Thanks,
    Alan.

    try live chat on this link https://bt.custhelp.com/app/contact#h=eyJzdGVwMCI6ImNvbnRhY3RJdGVtTGluazU2MjciLCJzdGVwSWR4IjoxLCJzdG...
    If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the reply answers your question then please mark as ’Mark as Accepted Solution’

  • My on/off button does not function.

    Hello...my on/off switch will not work. Everything else work appropriately. What can I do to fix it?

    Do you mean the sleep/wake button? What exactly about it is not functioning?

  • Middle mouse button does not function for Firefox Tab browsing when cetain programs are running.

    My Microsoft Comfort Mouse 3000 middle button is set in Firefox to open and close tabs. (In Control Panel, Mouse, Firefox is the only program exception and the Wheel button is set to middle-click instead of the default Instant Viewer).
    When vlc media player (http://www.videolan.org/vlc/) is running and at some point viewed in full screen, the middle mouse button reverts in Firefox to the default Instant Viewer. When vlc is closed, tab operation once again works.
    The same thing happens if MWSnap screen capture (http://www.mirekw.com/winfreeware/mwsnap.html) is running.

    Very glad to see I am not alone. Alas....that answer did nothing on my system. I also am very very frustrated that, all of a sudden, my middle mouse button brings up a weird four pointed arrow! (see pic) I NEED it to open links in tabs for researching!!
    I turned off auto scrolling in the advanced settings. Restarted FF even...and nada.
    I have disabled every single add on I had (only like 6 of them)...and nothing.
    This happened all the sudden...I dont even know of an update. FF v3.6.10

  • Private browsing worked fine on the last version, but does not seem to work at all in the new 4 version, so what is the problem? I have uninstalled and reinstalled it several times but that does not solve the problem.

    My points above lay out the problem and I get messages telling me it can't find the files....Why is it not working when it did just fine right up until you came out with version 4???
    Any suggestions? I may have to go to another browser, but I have always like your product best.

    You are welcome. There has never been a need to move that one before, but try it since you can always put it back.
    If the same, try booting into the Safe Mode using your normal account.  Disconnect all peripherals except those needed for the test. Shut down the computer and then power it back up after waiting 10 seconds. Immediately after hearing the startup chime, hold down the shift key and continue to hold it until the gray Apple icon and a progress bar appear and again when you log in. The boot up is significantly slower than normal. This will reset some caches, forces a directory check, and disables all startup and login items, among other things. When you reboot normally, the initial reboot may be slower than normal. If the system operates normally, there may be 3rd party applications which are causing a problem. Try deleting/disabling the third party applications after a restart by using the application un-installer. For each disable/delete, you will need to restart if you don’t do them all at once.
    Safe Mode - About
    Safe Mode - Yosemite

Maybe you are looking for