Pipe name of Windows Internal Database

Hi.
I need to move WSUS database from WID to a SqlServer. The 1st problem is I cannot get access to this WID instance.
When I try to connect WID within this server, my SqlServer management studio returns:
TITLE: Connect to Server
Cannot connect to \\.\pipe\MSSQL$MICROSOFT##SSEE\sql\query.
ADDITIONAL INFORMATION:
A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider:
Named Pipes Provider, error: 40 - Could not open a connection to SQL Server) (Microsoft SQL Server, Error: 2)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft%20SQL%20Server&EvtSrc=MSSQLServer&EvtID=2&LinkId=20476
The system cannot find the file specified
BUTTONS:
OK
I've tried management studios from sqlserver 2012 and sqlserver 2005.
Any idea? Thanks.
Eternal Snow

MSSQL$MICROSOFT##SSEE\sql\query is not listed by pipelist but server is running well.
Maybe name is changed.
Eternal Snow

Similar Messages

Remote connect to Windows Internal Database from another server

Hello,
I have a WSUS server which has Windows Internal Database installed. Now If I have to manage the database using SQL Server management studio, then I need to connect using the Server Name as \\.\pipe\MSSQL$MICROSOFT##SSEE\sql\query
Now, if I want to connect to the server that has Windows Internal Database installed, but does not have SQL Server Management Studio installed, then how to connect?
Please advice. Thanks in advance.
Rajiv

You can either install SQL Server management Studio or SQLCMD and then work with Windows Internal Database
Both of these are freely downloadable from microsoft website.
Please find the links for SQL 2014
Management Studio
http://www.microsoft.com/en-gb/download/details.aspx?id=42299
You can download one of these based on 32/64bit
MgmtStudio 32BIT\SQLManagementStudio_x86_ENU.exe
MgmtStudio 64BIT\SQLManagementStudio_x64_ENU.exe
SQLCMD
http://www.microsoft.com/en-gb/download/details.aspx?id=29065
Check the section Microsoft® SQL Server® 2012 Command Line Utilities
HTH
Regards, Ashwin Menon My Blog - http:\\sqllearnings.com

Windows Internal Database on Windows Server 2012 - How can I find out what role or feature is using it?

We have setup many roles and features and apparently one of them is using the Windows Internal Database (WID). We have had some events logged for WID and need to troubleshoot them. But we are not sure which role/feature is using it. How can I find
this out?

Hi,
Several components of Windows Server 2008 and 2012 use Windows Internal Database for their data storage: Active Directory Rights Management Services, Windows System Resource Manager, UDDI Services, Active Directory Federation Services 2.0, IPAM and Windows
SharePoint Services.
Which role did you setup or what is the error message did you received？
Regards.
Vivian Wang

Windows Internal Database RDS 2012 R2

Hi folks
It's possible collect information on logon in servers Session Host across from Windows Internal Database in the RDS Connection Broker?
Thanks
Wilsterman Fernandes

Hi,
Do you need any other assistance?
Thanks.
Dharmesh Solanki
TechNet Community Support

What are the limits of using windows internal database in RMS?

hi,
We dont have SQL server to use and opting to use windows internal database
What are the limits of using windows internal database in RMS?
tnx

Hi,
the main limitation is that you cannot access a SQL express from remote (even there are tricks to work around that), so you cannot add another machine to the RMS cluster.
Microsoft's recommendation for production systems is to use a full SQL server, what allows you clustering and running all sorts of maintenance tasks.
Other than that SQL Express has a 10GB total limitation for all databases running on that server.
See also http://technet.microsoft.com/en-us/library/dd772673(v=WS.10).aspx for RMS hardware and software requirements.
Hope that helps,
Lutz

Server 2012: Windows Internal Database error during installation

I am using the current RC build.
While trying to install IPAM services, I am prompted to install a Windows Internal Database.
However, setup consistently dies on me with an error that "The operation could not be completed, because the server that you specified requires a restart".
OK, fine. I restart the server and start setup again and I get the error again. Anyone seen this before?

Open up your domain group policy editor.
Navigate to the Default Domain Policy
Navigate to Policies -> Windows Settings -> Security Settings -> Local Policy -> User Rights Assignment
Find the “Log on as a service” policy and edit it.
Click on “Add user or group” button.
Add the following users: NETWORK, NETWORK SERVICE, SERVICE
Got to your Server 2012 machine and open an elevated command prompt.
Type in: gpupdate /force. Wait for it to successfully complete
Now try and install the WID .
You should now have successfully completed the installation.
This worked for me. I created a GPO for the container that the server was in, and applied the users as you showed. After a GPUPDATE /FORCE everything worked great, I was able to install the WID and then was able to install WSUS.
Thank you for this help and greetings from the US.

AD RMS - Windows Internal Database - Cluster

Hello ,
Regarding this post about ADFS configuration:
"In a farm with WID as the database, the first server in the farm act as the primary server and host a read / write copy of the database . Secondary servers replicate inbound Then the configuration data Into Their read-only database . "
I would like to do the same thing for my AD RMS configuration in order to avoid an external SQL Server cluster.
Therefore , I have 2 AD RMS server organized as a cluster and I would like a system of primary / secondary WID as databases . For ADFS , they speak about a server farm , is it possible to do so for AD RMS ?
Many thanks and sorry for my english..
++

Hi,
Since we are not familiar with AD RMS, here is a dedicated AD RMS forum below I suggest you refer to so you can get more professional support:
Active Directory Rights Management Services (On premise) Forum
https://social.technet.microsoft.com/Forums/en-US/home?forum=rms
Thank you for your understanding and support.
Best Regards,
Amy
Please remember to mark the replies as answers if they help and un-mark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]

How to get carrier company name on windows phone 8.1?

how to get carrier company name on windows phone 8.1?

excuse me, i referrer the link http://stackoverflow.com/questions/26973111/get-carrier-name-cellular-mobile-operator-name-using-windows-phone-8-1 to
modify my universal app.
but i always get 0 count from the GetNetworkNames() method.
if my sim card is for 3G, but i setting 4G in highest connection speed. i got the "the pipe is being closed".
how can i solve the problem? thank you.

Update Folder Name in Itunes after altering Folder Name in Windows Explorer

I changed the names of Album folders using Windows Explorer. How can I make the new folder names appear in the Album list within Itunes?

iTunes doesn't display the folder names, it displays imnformation in the library database which it takes from the tags. If you want to chamge what iTunes displays, use Get Info to edit the information.
But if you change folder names in Windows explorer, iTunes will no longer be able to find the files as the path has changed and iTunes doesn't do folder watching.

ACS internal database replication

I have setup ACS internal database replication and it works once then the secondary config is overwritten and doesn't contain the AAA server of the primary.
primary - 10.100.253.25
ACS 1113 running 4.2
secondary - 10.100.253.26
ACS 1113 running 4.2
Example of before and after
Before replication
The primary has these AAA servers listed under network components.
self - 127.0.0.1
acs2 - 10.100.253.26
The secondary has these AAA servers listed under network components.
self - 127.0.0.1
acs1 - 10.100.253.25
After replication
The primary has these AAA servers listed under network components.
self - 127.0.0.1
acs2 - 10.100.253.26
The secondary has these AAA servers listed under network components.
self - 127.0.0.1
acs2 - 10.100.253.26
therefore after the first replication subsequent attempts will fail because the secondary won't accept attempts from unknown AAA servers. Is this to be expected or can I mitigate it in someway?

Please try setting the original ip address by using "Set ip" Command from the console connection of the ACS Solution engine. Once you successfully changed the ip address, you can apply the patch 11 or above (latest is patch 16) on the ACS SE (This will fix the problem).
In majority of cases set ip command fails but sometime works too.
In case it doesn't help then we have 2 options:
1.] Open a TAC case, send the database file to delete the entry.
2.] If you are not intrested sending your database then try the below listed steps:
In order to remove the loopback entry from the Database, we need to follow following steps,
Please download ACS 4.2 trial from following link, if you do not have ACS Full version for Windows purchased.
http://www.cisco.com/cgi-bin/tablebuild.pl/acs-win-eval- eval-ACS-4.2.0.124-SW.zip
[1] Install eval version on Windows 2000/2003 server. Please also ensure that JAVA is installed on that server.
[2] Take a backup from ACS SE from, System Configuration > ACS Backup >Backup Now.
[3] Restore the database backup on ACS eval.
[4] On eval ACS , go to Network Configuration > find the AAA Server entry with 127.0.0.1 entry. Edit it and give it some other IP for
example, 1.1.1.1. Submit + Apply.
[5] On eval, Restart CSAdmin service.
[6] On eval, go back to Network Configuration and search for the changed IP address and delete that entry, Delete + Apply.
[7] Take a backup from eval ACS, System Configuration > ACS Backup > Backup Now.
[8] Restore the database backup from eval ACS into ACS SE from option, System Configuration > ACS Restore, choose the database backup. Check Check option "User and Group Database" and "CiscoSecure ACS System Configuration", then press Restore Now.
[9] On ACS SE, go to Network Configuration, make sure that 127.0.0.1 entry is not there and for ACS SE's hostname we have the correct IP address. Go to Proxy Distribution Table > (Default). Move the server’s hostname entry that has correct IP for this ACS SE into "Forward To" column, if not already. Then press "Submit + Restart".
Reference defect, CSCso36620 - Toggle nic command changes AAA server ip address to "127.0.0.1" in GUI.
Regards,
Jatin
Do rate helpful posts-

Migrate WSUS/MS Internal database from 2005 express to 2012 express

We are using WSUS 3 SP1 on a 2008r2 server and 2005 SQL Express to host the internal database. Is there anything I need to do to upgrade this to 2012 SQL Express? We have an application which is requiring 2012 Express as a minimum and would like everything
under one package with separate database instances.

Hi
As Alberto’s post, it's not supported to run a Windows Server Update Services (WSUS) database on SQL Server 2012 in Server 2008 R2. Since your application requires SQL Server 2012 Express as a minimum, you can try the following method:
1. WSUS in Server 2012 supports SQL Server 2012, if you want to upgrade WSUS database supports SQL Server 2012, you need to upgrade WSUS 3.0 SP1, operation system and so on. For more information, you can post the question about WSUS in the
Windows Server forums. It is appropriate and more experts will assist you. In addition, upgrade SQL Server 2005 to SQL Server 2012, as Shanky’s post, you need to make sure that your SQL Server 2005 has been applied Service Pack 4.
2. However, if you don’t want to upgrade WSUS database from SQL Server 2005 to SQL Server 2012, I recommend you to install a new instance of SQL Server 2012 on Windows Server 2008 R2.
In addition, before installing SQL Server 2012 or upgrading to SQL Server 2012, your system should meets the following prerequisites:
• The Windows Installer service must be running.
• Microsoft .NET Framework 3.5 SP1 and .NET Framework 4.0 are required.
• Windows PowerShell 2.0 or later is required if you're upgrading the database engine.
For more information about the prerequisites for installing SQL Server 2012, please review the following link:
Hardware and Software Requirements for Installing SQL Server 2012:
http://msdn.microsoft.com/en-us/library/ms143506(v=sql.110).aspx
Thanks
Lydia Zhang

Can I change the COMPUTER NAME of Windows Server ?

Hi all,
Is it possible to change the Computer Name of the Windows Server 2008, if Yes, what's the effect on all terminal profile on each station?
** We have many station that accessing some files thru pipe name ex: \\MyServer\Data\ hard coded on program public folders on server, but the newly installed server was named "MyServer2" can just rename it back to "MyServer" without problems
on client station? " ***
Thanks ^_^y

Yes. You can change the name.
You need to update all reference to new server name. You can try creating an Alias in DNS as a co-existence option.
Santhosh Sivarajan | Houston, TX
Windows 2012 Book - Migrating from 2008 to Windows Server 2012
http://www.sivarajan.com/
This post is provided ASIS with no warran

Need the name of the Global Database

I did not note the name of the global database while installing Oracle 10g EXPRESS for Windows. How do I get the name now?

user11335486 wrote:
I did not note the name of the global database while installing Oracle 10g EXPRESS for Windows. How do I get the name now?You can check from global_name view,
Connected to:
Oracle Database 11g Enterprise Edition Release 11.1.0.6.0 - Production
With the Partitioning, Oracle Label Security, OLAP, Data Mining
and Real Application Testing options
SQL> select * from global_name;
GLOBAL_NAME
--------------------------------------------------------------------------------ORCL.US.ORACLE.COM
SQL>HTH
Aman....
Edited by: Aman.... on Jul 6, 2009 1:17 PM
apologies Taj for the repeated answer, you were fast :)

Using a variable to name a window?

Is it possible to use a user-defined variable to name a
window? I'm hoping to set up a "template" system of sorts for a
family of products, all of which are very similar. I'd just like to
name the window accordingly to the product name via a variable if
possible.

Hi there
If this is a feature you feel would be a valuable addition to
those offered by RoboHelp, consider telling the Adobe RoboHelp
Development team about it. You may do that by
clicking
here and completing the form.
Cheers... Rick

An internal database error occurred in the Business Data Connectivity Shared Service. SQL Error Number : 229

Recently i upgraded my SharePoint server 2013 to SP1, after the upgrade i received following message in manage database Status page " Databases running in compatibility range, upgrade recommended"
for Business Data Connectivity Database. Then i ran Sharepoint Configuration wizard, which fixed that error on that page but i am getting a error message while accessing BDCApplication page in manage service applications pagein central admin"
An internal database error occurred in the Business Data Connectivity Shared Service. SQL Error Number : 229
Sys Log :
The BDC Service application failed due to a SQL Exception: SQLServer host WSQLD05\DV. The error returned was: 'The EXECUTE permission was denied on the object 'proc_ar_GetAdministrationMetadataCatalogByPartitionId', database 'sp_BusinessDataConnectivity_DV13',
schema 'dbo'.'
I checked the Db role of the service app pool account, it has SPDataAccess permission over the Database. i cant recreate another application without knowing the root cause. I hope i can get better option to troubleshoot the issue.
Thank you

As per the error message, you can at least grant the BDC service application pool account the EXECUTE perimssions on the sp_BusinessDataConnectivity_DV13 database
Edwin Sarmiento SQL Server MVP | Microsoft Certified Master
Blog |
Twitter | LinkedIn
SQL Server High Availability and Disaster Recover Deep Dive Course

Pipe name of Windows Internal Database

Similar Messages

Maybe you are looking for