Pipeline withdrawal fails after SAP upgrade 4.6B to ECC 6.0

Hi experts,
our customer has been using Water as a pipeline material for years now, but after upgrade to ECC 6.0, we receive error message M7009 (Special Stock P not defined) when trying to perform a goods issue to process order for this (same) article.
Strangely, the error message only comes up when we use COR6 or MIGO's 'Goods issue to order' or 'to reservation', and not when we do 'goods issue other', manually take movement type 261 P, and check.
Now since the only difference I can see at this point is the absence of the Reservation tab in MIGO, I assume the reservation has something to do with this error.
Any ideas?

Hi,
before confirming production order via Co15, in goods movements, there is storage location populated for this material. If I delete SL for it, then goods movement is succesfully done.
In ecc 5.0, SL is also populated but it is working fine.
Any idea?
Edited by: Alberto Emilio Gallardo Doñate on Apr 22, 2010 12:21 PM

Similar Messages

  • Need knowledge on sap upgrade 4.7 to ecc 6.0 in abap reports and sap query

    please give me some ideas and useful links on sap upgrade 4.7 to ecc 6.0 in abap reports and sap query

    Hi Jaya,
    Not very clear with your question.
    Are you looking for changes in areas od ABAP reports & SAP query when we upgrade SAP from 4.7 to ECC 6.0 ??
    If the response is YES, then please refer to SAP solution browser www.sapsolutionbrowser.com
    Define source release and target release .
    You will get module wise details on new features for target release.
    Hope this helps.
    Regards,
    Deepak Kori

  • # signs instead of polish letters ą, ę etc. after SAP upgrade.

    I am not sure that it is connected with SAP upgrade see my another topic on SCN Rabax during sap gui login
    Do you know what could be the reason and is it reversible? Maybe there are some settings in SAP editor?
    It is nonunicode ECC 6.0 EHP6 (after upgrade). Before upgrade it was ECC 5.0.
    Thanks in advance.
    QAS

    Hi,
    Looking at the thread:
    Rabax during sap gui login
    it seems you have changed entries in TCPDB from 1401 to 1100.
    This would explain your problem.
    I would recommend to do a proper setup via report rscpinst.
    Therefore you need to know how the system was setup before the upgrade.
    If it was single code page with 1401, you need to maintain the used languages and the country field according to SAP note 43205 (the country setting can be found in table TCP0D in the old system).
    Best regards,
    Nils

  • XLR stopped to work after SAP upgrade

    I upgraded a customer from 2005A SP1 to 2007. XLR worked before the upgrade and stopped to work after the upgrade.
    I get e message that COM Add-ins command is not loaded, but it is exist in Excel and worked fine before the upgrade.
    In SAP Note 1287193 I found that I may want to clean up my registry. In 2007 XLR is part of the Installer, so I can't reinstall it. Can I use in this Note?
    Thanks,
    Olga

    If you only get COM Add-ins command is not loaded, you may just need to run ComAddIn_per_User_RegKey.reg under C:\Program Files\SAP\SAP Business One\AddOns\XLR\XLReporter\Client.
    Try this first.  That is the simplest way to handle the error.
    Thanks,
    Gordon

  • Newly Created authorization Objects after SAP Upgrade

    Can someone tell me whether there is any transaction or table that display the added object authorizations after a Sap Upgrade ?
    Thanks in advance.

    Also, you can check SAP_NEW profile which shows which authorization objects have been added in which release.

  • Udisks inhibiting fails after system upgrade

    Hi,
    To keep my cdrom silent I have in rc.local this line:
       udisks --inhibit-all-polling &
    It worked fine, but stopped working after yesterdays upgrade
    Now it (in console) returns:
       Inhibit all polling failed: Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken.
    And in kernel.log I found this:
       May 29 20:58:27 Mypc2 kernel: [ 2160.206487] INFO: task udisks-daemon:2105 blocked for more than 120 seconds.
       May 29 20:58:27 Mypc2 kernel: [ 2160.206491] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
       May 29 20:58:27 Mypc2 kernel: [ 2160.206494] udisks-daemon   D c109b5e5     0  2105      1 0x00000000
       May 29 20:58:27 Mypc2 kernel: [ 2160.206500]  f4b29d8c 00000086 f4b29d04 c109b5e5 00000001 00000000 f4a9f980 f533de00
       May 29 20:58:27 Mypc2 kernel: [ 2160.206507]  f2748400 f533de00 f4b29d14 c127164f 000000c3 f6006380 c14c4380 f4a9f8c0
       May 29 20:58:27 Mypc2 kernel: [ 2160.206514]  f4a9fa84 f533de48 f533dfd4 c14c4380 f6006380 f4a9f8c0 c142df60 00000000
       May 29 20:58:27 Mypc2 kernel: [ 2160.206521] Call Trace:
       May 29 20:58:27 Mypc2 kernel: [ 2160.206531]  [<c109b5e5>] ? __rcu_read_unlock+0x185/0x190
       May 29 20:58:27 Mypc2 kernel: [ 2160.206536]  [<c127164f>] ? sock_def_readable+0x5f/0x70
       May 29 20:58:27 Mypc2 kernel: [ 2160.206541]  [<c11a3a42>] ? kobject_get+0x12/0x20
       May 29 20:58:27 Mypc2 kernel: [ 2160.206546]  [<c1195a8f>] ? get_disk+0x6f/0x120
       May 29 20:58:27 Mypc2 kernel: [ 2160.206552]  [<c131ad9d>] __mutex_lock_slowpath+0x10d/0x2b0
       May 29 20:58:27 Mypc2 kernel: [ 2160.206556]  [<c131af4b>] mutex_lock+0xb/0x20
       May 29 20:58:27 Mypc2 kernel: [ 2160.206560]  [<c1131447>] __blkdev_get+0x47/0x320
       May 29 20:58:27 Mypc2 kernel: [ 2160.206564]  [<c1131762>] blkdev_get+0x42/0x290
       May 29 20:58:27 Mypc2 kernel: [ 2160.206567]  [<c11319fe>] blkdev_open+0x4e/0x70
       May 29 20:58:27 Mypc2 kernel: [ 2160.206572]  [<c1102e36>] __dentry_open+0xe6/0x300
       May 29 20:58:27 Mypc2 kernel: [ 2160.206576]  [<c1104186>] nameidata_to_filp+0x66/0x80
       May 29 20:58:27 Mypc2 kernel: [ 2160.206579]  [<c11319b0>] ? blkdev_open+0x0/0x70
       May 29 20:58:27 Mypc2 kernel: [ 2160.206584]  [<c111124f>] finish_open+0xaf/0x1a0
       May 29 20:58:27 Mypc2 kernel: [ 2160.206587]  [<c1110043>] ? do_path_lookup+0x53/0xe0
       May 29 20:58:27 Mypc2 kernel: [ 2160.206591]  [<c1111838>] do_filp_open+0x1d8/0x6a0
       May 29 20:58:27 Mypc2 kernel: [ 2160.206595]  [<c11affff>] ? kstrtoll+0xf/0x80
       May 29 20:58:27 Mypc2 kernel: [ 2160.206600]  [<c115ac27>] ? sysfs_release+0x77/0x90
       May 29 20:58:27 Mypc2 kernel: [ 2160.206604]  [<c11041f5>] do_sys_open+0x55/0xf0
       May 29 20:58:27 Mypc2 kernel: [ 2160.206608]  [<c1103569>] ? filp_close+0x49/0x70
       May 29 20:58:27 Mypc2 kernel: [ 2160.206611]  [<c11042b9>] sys_open+0x29/0x40
       May 29 20:58:27 Mypc2 kernel: [ 2160.206615]  [<c10037df>] sysenter_do_call+0x12/0x28
    I looked at packages that were upgraded yesterday, and here are few that can be relevant to this issue:
       [2011-05-28 22:48] upgraded udev (167-2 -> 171-1)
       [2011-05-28 22:49] upgraded udisks (1.0.3-2 -> 1.0.3-3)
       [2011-05-28 22:51] upgraded kernel26 (2.6.38.6-1 -> 2.6.38.7-1)
       [2011-05-28 22:51] upgraded kernel26-headers (2.6.38.6-1 -> 2.6.38.7-1)
       [2011-05-28 22:52] upgraded udev-compat (167-2 -> 171-1)
    So what might be wrong? Any ideas?
    Thanks

    What if you disable polling of a specific device with " udisks --inhibit-polling /dev/the_devicename & " ? So without 'all', and using the_devicename that "ps aux | grep udisks-daemon" shows?
    And have you tried using and udev rule instead of a line in rc.local? For example I use this to disable polling a card reader:
    # /etc/udev/rules.d/02-udev-disable-cardreader-polling.rules
    SUBSYSTEM=="block", ENV{ID_VENDOR}=="APPLE*", ENV{ID_MODEL}=="SD Card Reader*", ENV{UDISKS_DISABLE_POLLING}="1"

  • "/usr/lib/cups/backend/usb failed" After Kernel Upgrade

    When I upgraded my kernel to 2.6.31.5-1 from  2.6.31.4-1 and tried printing a file, I got this error from cups:
    "/usr/lib/cups/backend/usb failed"
    The printer was working perfectly fine yesterday.
    Upgrade I did today before rebooting my pc to use the new kernel:
    [2009-10-27 09:49] upgraded compositeproto (0.4-2 -> 0.4.1-1)
    [2009-10-27 09:49] upgraded consolekit (0.3.1-1 -> 0.4.1-1)
    [2009-10-27 09:49] upgraded dbus-glib (0.80-1 -> 0.82-1)
    [2009-10-27 09:49] upgraded dmxproto (2.2.99.1-1 -> 2.3-1)
    [2009-10-27 09:49] upgraded fontcacheproto (0.1.2-2 -> 0.1.3-1)
    [2009-10-27 09:49] upgraded pango (1.26.0-1 -> 1.26.0-2)
    [2009-10-27 09:49] upgraded shared-mime-info (0.60-1 -> 0.70-1)
    [2009-10-27 09:49] upgraded gtk2 (2.18.2-1 -> 2.18.3-1)
    [2009-10-27 09:49] upgraded hicolor-icon-theme (0.10-2 -> 0.11-1)
    [2009-10-27 09:49] upgraded kbproto (1.0.3-2 -> 1.0.4-1)
    [2009-10-27 09:49] upgraded module-init-tools (3.10-2 -> 3.11.1-1)
    [2009-10-27 09:50] >>> Updating module dependencies. Please wait ...
    [2009-10-27 09:50] >>> MKINITCPIO SETUP
    [2009-10-27 09:50] >>> ----------------
    [2009-10-27 09:50] >>> If you use LVM2, Encrypted root or software RAID,
    [2009-10-27 09:50] >>> Ensure you enable support in /etc/mkinitcpio.conf .
    [2009-10-27 09:50] >>> More information about mkinitcpio setup can be found here:
    [2009-10-27 09:50] >>> http://wiki.archlinux.org/index.php/Mkinitcpio
    [2009-10-27 09:50]
    [2009-10-27 09:50] >>> Generating initial ramdisk, using mkinitcpio. Please wait...
    [2009-10-27 09:50] ==> Building image "default"
    [2009-10-27 09:50] ==> Running command: /sbin/mkinitcpio -k 2.6.31-ARCH -c /etc/mkinitcpio.conf -g /boot/kernel26.img
    [2009-10-27 09:50] :: Begin build
    [2009-10-27 09:50] :: Parsing hook [base]
    [2009-10-27 09:50] :: Parsing hook [udev]
    [2009-10-27 09:50] :: Parsing hook [autodetect]
    [2009-10-27 09:50] :: Parsing hook [pata]
    [2009-10-27 09:50] :: Parsing hook [scsi]
    [2009-10-27 09:50] :: Parsing hook [sata]
    [2009-10-27 09:50] :: Parsing hook [usb]
    [2009-10-27 09:50] :: Parsing hook [pcmcia]
    [2009-10-27 09:50] :: Parsing hook [usbinput]
    [2009-10-27 09:50] :: Parsing hook [keymap]
    [2009-10-27 09:50] :: Parsing hook [filesystems]
    [2009-10-27 09:50] :: Generating module dependencies
    [2009-10-27 09:50] :: Generating image '/boot/kernel26.img'...SUCCESS
    [2009-10-27 09:50] ==> SUCCESS
    [2009-10-27 09:50] ==> Building image "fallback"
    [2009-10-27 09:50] ==> Running command: /sbin/mkinitcpio -k 2.6.31-ARCH -c /etc/mkinitcpio.conf -g /boot/kernel26-fallback.img -S autodetect
    [2009-10-27 09:50] :: Begin build
    [2009-10-27 09:50] :: Parsing hook [base]
    [2009-10-27 09:50] :: Parsing hook [udev]
    [2009-10-27 09:50] :: Parsing hook [pata]
    [2009-10-27 09:50] :: Parsing hook [scsi]
    [2009-10-27 09:51] :: Parsing hook [sata]
    [2009-10-27 09:51] :: Parsing hook [usb]
    [2009-10-27 09:51] :: Parsing hook [pcmcia]
    [2009-10-27 09:51] :: Parsing hook [usbinput]
    [2009-10-27 09:51] :: Parsing hook [keymap]
    [2009-10-27 09:51] :: Parsing hook [filesystems]
    [2009-10-27 09:51] :: Generating module dependencies
    [2009-10-27 09:51] :: Generating image '/boot/kernel26-fallback.img'...SUCCESS
    [2009-10-27 09:51] ==> SUCCESS
    [2009-10-27 09:51] upgraded kernel26 (2.6.31.4-1 -> 2.6.31.5-1)
    [2009-10-27 09:51] upgraded libfetch (2.25-1 -> 2.26-1)
    [2009-10-27 09:51] upgraded libgpg-error (1.6-1 -> 1.7-2)
    [2009-10-27 09:51] upgraded libpciaccess (0.10.8-1 -> 0.10.9-1)
    [2009-10-27 09:51] upgraded libspectre (0.2.2-2 -> 0.2.3-1)
    [2009-10-27 09:51] upgraded xf86dgaproto (2.0.99.1-1 -> 2.1-1)
    [2009-10-27 09:51] upgraded libxxf86dga (1.0.99.1-1 -> 1.1.1-0.1)
    [2009-10-27 09:51] upgraded mlocate (0.22.2-1 -> 0.22.2-2)
    [2009-10-27 09:51] upgraded sqlite3 (3.6.18-1 -> 3.6.19-1)
    [2009-10-27 09:51] upgraded nss (3.12.4-1 -> 3.12.4-2)
    [2009-10-27 09:51] upgraded pcmanfm (0.5.1-2 -> 0.5.2-1)
    [2009-10-27 09:51] upgraded perl (5.10.1-3 -> 5.10.1-5)
    [2009-10-27 09:51] upgraded pixman (0.16.0-1 -> 0.16.2-1)
    [2009-10-27 09:51] upgraded popt (1.14-1 -> 1.15-1)
    [2009-10-27 09:51] upgraded pygtk (2.16.0-1 -> 2.16.0-2)
    [2009-10-27 09:51] upgraded python (2.6.3-2 -> 2.6.4-1)
    [2009-10-27 09:51] upgraded qtcurve-gtk2 (0.69.0-1 -> 0.69.2-1)
    [2009-10-27 09:51] upgraded randrproto (1.3.0-1 -> 1.3.1-1)
    [2009-10-27 09:51] upgraded recordproto (1.13.2-2 -> 1.14-1)
    [2009-10-27 09:51] upgraded tzdata (2009n-1 -> 2009o-1)
    [2009-10-27 09:51] upgraded xbitmaps (1.0.1-2 -> 1.1.0-1)
    [2009-10-27 09:51] upgraded xcursor-themes (1.0.1-2 -> 1.0.2-1)
    [2009-10-27 09:51] upgraded xf86miscproto (0.9.2-2 -> 0.9.3-1)
    [2009-10-27 09:51] upgraded xf86vidmodeproto (2.2.99.1-1 -> 2.3-1)
    [2009-10-27 09:51] upgraded xineramaproto (1.1.99.1-1 -> 1.2-1)
    [2009-10-27 09:51] upgraded xorg-apps (7.4-2 -> 7.5-1.1)
    [2009-10-27 09:51] upgraded xproto (7.0.15-1 -> 7.0.16-1)
    [2009-10-27 09:51] upgraded xulrunner (1.9.1.3-1 -> 1.9.1.3-2)
    Last edited by ShadowKyogre (2009-10-28 01:32:52)

    I downgraded the kernel and the printer works again and I forgot to mention I had usblp blacklisted both before and after I upgraded.

  • 3gs iOS 6.1.2 call failed - after software upgrade

    After the upgrade, i can receive calls, connect to wireless, send texts and play sounds, but cannot make calls.
    "Call Failed" is the msg i get wthin a second of dialling.
    The signal strength is excellent and since i have tried calling several phones (land and mobiles, with different providers/carriers) within my home, I know they are not busy and it cannot be a network problem.
    Any suggestions?
    thanks

    Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new).  Try each of these in order until the issue is resolved.

  • PC-Suite sync fails after Firmware upgrade of E65

    After firmware upgrade of E65 PC-Suite stops syncing Calendar & Contacts from outlook. No error messages, just "0 entries has been updated".
    - PC-Suite updated to 7.0.9.2
    - Outlook 2003
    - XP Prof.
    Any ideas?
    Solved!
    Go to Solution.

    The funny thing is - the notes are synced???? If I restore some old contacts they'll double up in outlook, so I think the problem is, that the sync app doesn't see the outlook contact & calendar folder.
    Does somebody has an idea?

  • PDF in Japanese language not appearing after SAP upgrade

    Hi,
    When a P.O. is generated and when user clicks on Print Preview a PDF file will be generated and sent to the Vendor in Japanese Language, It was working fine now some SAP upgrades has  been done last week, Now nothing appears in the PDF P.O. generated, So please let me know what went wrong and is there a seperate package for Japanese language or how to go about this.
    Points assured.
    Regards,
    Prabhu

    Please help me.....
    Points assured
    regards,
    Prabhu

  • Forms and Reports 6i connections fail after db upgraded 10gr2

    After database upgraded to 10gr2 on 64bit Windows 2008 server, connections from forms and reports 6i hang while sqlplus connections work. After database is restarted, connections to forms and reports work again but only for a few days?
    Also if authenication is changed from NTS to NONE, we do not experience any connection problems from forms or reports.
    Any suggestions would be appreciated.
    Thanks

    Hi!
    Is there maybe a database package that gets invalid form some reason?
    And if forms/reports tries to connect, the package should get compiled cause of a call
    to it and this ends in a endless lock?
    Regards

  • WCF-SAP Adapter throwing errors after SAP Upgrade from ECC 5 to ECC6 Release 640 to 700

    Hello Everyone,
    We were able to communicate(Send and Receive Idoc's) to SAP via WCF-SAP Adapter in BizTalk 2010.
    SAP Servers were upgraded to ECC5 to ECC 6 and we started facing below issue communicating on send and receive both.
    I am aware that there is a hotfix available but that is more on the Receive Side from SAP. Nevertheless I installed the hotfix but issue still persists. Any suggestions will be highly appreciated.
    Microsoft.ServiceModel.Channels.Common.XmlReaderParsingException: The segment name is not valid for the IDOCTYP, Release, or CIMTYP. Segment name: E2EDP01006GRP   IDOCTYP: ORDERS05   
    Release: 700    CIMTYP: . Ensure that your message xml validates against the operation schema.
    Server stack trace:
       at System.Runtime.AsyncResult.End[TAsyncResult](IAsyncResult result)
       at System.ServiceModel.Channels.ServiceChannel.SendAsyncResult.End(SendAsyncResult result)
       at System.ServiceModel.Channels.ServiceChannel.EndCall(String action, Object[] outs, IAsyncResult result)
       at System.ServiceModel.Channels.ServiceChannel.EndRequest(IAsyncResult result)
    Exception rethrown at [0]:
       at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
       at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
       at System.ServiceModel.Channels.IRequestChannel.EndRequest(IAsyncResult result)
       at Microsoft.BizTalk.Adapter.Wcf.Runtime.
    Thanks,
    Vikingss

    I am aware that there is a hotfix available but that is more on the Receive Side from SAP. Nevertheless I installed the hotfix but issue still persists. Any suggestions will be highly appreciated.
    For this issue, you can contact Microsoft support directly(http://support.microsoft.com).

  • [Solved by itself] Loading module aha152x failed after kernel upgrade

    Hi all,
    I have a ten-year old Epson GT5500 scanner plugged onto an ISA card.
    This was quite hard to get it working under linux but it worked well untill yesterday last update.
    I have the following error output when trying to load aha152x module:
    # modprobe aha152x
    FATAL: Error inserting aha152x (/lib/modules/2.6.27-ARCH/kernel/drivers/scsi/aha152x.ko): No such device
    I have the following line in /etc/modules.conf:
    alias scsi_hostadapter aha152x options aha152x aha152x=0x140,9
    How can I get the scanner back to work?
    Thanks.
    Last edited by Jeddo (2008-11-15 11:54:12)

    fwojciec wrote:Did you build the module yourself?  If so you might have to rebuild it for the new kernel version.
    No. The configuration to get the scanner working under linux comes from a how-to and remains valid after kernel upgrades -- until yesterday. It does not need any module building, only loading.

  • Error in SAP Upgrade 4.6C to ECC 6.0 in CONFLICT_CHECK Phase

    Hi All,
    I am doing an SAP Upgrade frm SAP 4.6C SR2 to ECC 6.0 SR2. When it enters the CONFLICT_CHECK we are facing the following error. i am performing this on Production system. Your immediate help is highly appreciated.
    #---- MASKING file CONFLCHK.LOG from E:\usr\sap\put\log
    #---- TIME: 20091212095249
    1 ETQ201XEntering upgrade-phase "CONFLICT_CHECK" ("20091212094722")
    2 ETQ367 Connect variables are set for standard instance access
    4 ETQ399 System-nr = '22', GwService = 'sapgw22'
    4 ETQ399 Environment variables:
    4 ETQ399   dbs_ora_schema=SAPR3
    4 ETQ399   auth_shadow_upgrade=0
    4 ETQ399 (trc) R3upExtendedInclusion: TRUE (default)
    4 ETQ399 (trc) R3upExtendedInclusion: TRUE (default)
    2 ETQ160 Starting conflict check
    4 ETQ010 Date & Time: 20091212094722 
    4 ETQ230 Starting RFC Login to: System = "CPA", GwHost = "DERSHASKFI140", GwService = "sapgw22"
    4 ETQ359 RFC Login to: System="CPA", Nr="22", GwHost="DERSHASKFI140", GwService="sapgw22"
    4 ETQ232 RFC Login succeeded
    4 ETQ233 Calling function module "SPDA_CONFLICT_CHECK" by RFC
    2EETQ360 RFC of "spda_conflict_check" failed:
    2EETQ361 code/exception  : SYSTEM_FAILURE
    2EETQ362 key             : RFC_ERROR_SYSTEM_FAILURE
    2EETQ364 message         :
    2EETQ399 SQL error 1654 occurred when accessing table OCSCMPLOBJ                    .
    4 ETQ359 RFC Login to: System="CPA", Nr="22", GwHost="DERSHASKFI140", GwService="sapgw22"
    4 ETQ232 RFC Login succeeded
    2EETQ235 Call of function module "SPDA_CONFLICT_CHECK" by RFC failed (error-status "-2")
    4 ETQ239 Logging off from SAP system
    4 ETQ010 Date & Time: 20091212094903 
    4 ETQ010 Date & Time: 20091212094903 
    Hemanth

    Hi,
    > 2EETQ399 SQL error 1654 occurred when accessing table OCSCMPLOBJ           
    Have you checked tablespace have sufficient space ?
    Thanks
    Sunny        .

  • SAP Upgrade 4.6C to ECC 6.0 EHP5 system customer is using Data Archiving

    Dear All,
    I am planning to do SAP Upgrade from 4.6C to ECC 6.0 EHP5, in the source system customer is using SAP DATA ARCHIVING. As per some of the SAP Notes before downtime phase we need to disable all the dataarchiving jobs .
    1) My question is do we need to do any presteps before starting the upgrade related to SAP DATA ARCHIVING ?
    2) After the upgrade if customer wants to use the old archiving objects etc... whether they will able to do it. For this do we need to raise any message with SAP regrading the dataarchiving before the upgrade
    Please let me know if you have any ideas on the above questions.
    Thanks & Regards
    Ravikiran

    Hi,
    I would suggest you to do the data archiving after upgrade project or finish data archiving before upgrade project. As lots of new archiving objects has been delivered in ECC.
    Also, its true that before starting downtime project you need to stop all your jobs. Also, SAP has recently introduced new retention management technique for data archiving starting from EHP4 onwards to manage data archiving more efficiently. If you are interested, you can explore this further on http://sdn.sap.com/irj/sdn/ilm or http://service.sap.com/ilm.
    Thanks
    Sunny

Maybe you are looking for

  • Bluetooth not working in Windows 7 x64

    Hi, My MBP is primarily used as a Windows 7 x64 box. Up until a couple of days ago, I've been using a bluetooth Logitech mouse and pairing with my iPhone without any problems. Two days ago, the mouse simply stopped working and I now cannot detect any

  • HP Laserjet 4100 on ExtendNet  XS print server

    Morning. I've connected an HP Laserjet 4100 via parallel cable with an ExtendNet SX ESI6004436 print server. The print server is connectes via ethernet cable with an Airport Express. For Windows there is a software ESI-Tools to handle and install the

  • Delete query taking too much time

    Hi All, my delete query is taking too much time. around 1hr 30 min for 1.5 lac records. Though I have dropped mv log on the table & disabled all the triggers on it. Moreover deletion is based on primary key . delete from table_name where primary_key

  • Drivers for connecting JDeveloper 3.2.3 to Oracle 9i

    Hi, I'm having trouble with the connection from JDeveloper 3.2.3 to Oracle 9i, if I connect to oracle 8i or Oracle 7.3 I have no trouble. I downloaded the ultimate "driver" for connection, I copied the files to the directories, and added the CLASSPAT

  • How to identify a deletion transport

    Hi All, We wanted to upload adobe form layout and interfaces from one system to another, say from A to B. Now in system B, all those adobe forms were present with the same name. So we deleted them. It asked for a transport and we named it "deletion t