Pixelated video when export projects using QUICKTIME COMPRSESION.

I'm having problems to export projects using QUICKTIME COMPRSESION. When I select either "quicktime movie" or "AVI", the result is a totally pixelated picture. I tried to do some settings in order to fix this problem but still doing the same. Make a note that only happens when I use QUICK TIME COMPRESION. It works fine when I select "quicktime movie" directly from export menu. i can use this to work onmy MAC but. it will not work with Vegas or whatsoever. SOME HELP WILL BE APRECIATED.
thanks
Juan.

I used the following settings:
compression: H.264
Quality: Best
Key frame Rate: 24
Dimensions: 720x480
Yes, vegas support Qt, The problem is exporting from FCP a pixelated video.
regards
Juan.

Similar Messages

Jumpy video when exporting (sharing) to Quicktime

Hi all,
I'm doing a simple internet commercial for a conference in Chicago. I am having a new problem with imovie. When I try to make the video into a quicktime movie the transitions and frames are jumpy. Here's a clip
http://timandalison.com/Transvision2007/Commercial2.html
It worked ok with my first commercial here:
http://forthefields.com/Transvision2007.html
I don't know why it's acting funny. I've used the same settings and everything. I used expert settings in sharing instead of the auto because I wanted to deiterlace it. This setting has made it worse. The jumpy one is compressed automatically for cd-rom and is better than most of the attempts i've made today.
Is it possibly my computer is having a hard time rendering it? It's been acting slow lately on everything else.
Any help is much abliged

i guess i figured it out.

When I Share my project using QuickTime the top of my video is chopped off, how do i fix this?

when I Share my project using QuickTime the top of my video is chopped off, how do i fix this?

What version of Premiere Elements and on what computer operating system is it running?
- Mac OSX; Premier Elements 11 v11
Where is the audio in the project - numbered audio tracks, Narration Track, and/or Soundtrack? Any chance that you are using a XviD.avi file?
- audio is either in the soundtrack , or in audio 2 when part of a video
Besides the full properties of your source file including file extension, what are the full export settings that you are using presumably for Publish+Share/Computer/MPEG?
- i was just using the default for MPEG, which is the NTSC DVD standard, file type MPEG2-DVD
What player are you using? Does the file playback video and audio using the VLC player? Does the problem exist in a new project?
- i have tried in quicktime and VLC, both have the same effect (picture works, staccato background noise). I have not tried in another file, but will do so now.

First four seconds of audio missing when exporting project as MPEG2

Hello all-
When I export my project from FCP (using version 6.0.6) using Compressor's (v. 3.0.5) MPEG2 Program Stream setting, everything works fine except for one slight problem: the first four seconds of audio are missing. I've looked back over my timeline (NTSC-DV with 4 tracks of 48khz 16bit audio), everything is fine, and the audio exported just fine using the H.264 codec. I've tried everything I can think of. Any suggestions?
Thanks so much,
Brett

Well I REALLY need some help with this one! I have tried so many different 'work arounds' without success. As mentioned in my first post the audio is not sync'ing with the video when exported. I have tried Exporting the file in QuickTime, I have tried using Compressor again exporting just the video then the audio - pulling it into a new session and lining it up again but everytime I pull it the newly exported file into a new project and render it FCP crashes not allowing it to render (nice!). I actually started from square one capturing the video footage again and assemble the project again without luck. I simply cannot believe what a pain in the arse this is!! I need to get this project done and it simply won't do it.
Where are my blood pressure pills????

Please help, I am trying to split a HD mp4 video into two parts using Quicktime 10.2

Please help, I am trying to split a HD mp4 video into two parts using Quicktime 10.2, running Mountain Lion. I use trim then export but it doesn't give the movie option as a format. What would you suggest i do?

I'm not sure why you're using a FAT32 drive, but using ExFAT instead of FAT32 would be a better overall choice as it doesn't have the 4 Gig limit.
http://www.tech-recipes.com/rx/2801/exfat_versus_fat32_versus_ntfs/

I am having trouble keeping the quality of my video when exporting to my external drive. I change the kind to "original" but when I view the video from the external drive once exported, the sound and picture are distorted.

I am having trouble keeping the quality of my video when exporting to my external hard drive. I have tried to export from iphoto with changing kind to "original" but when I open the video from the external drive the quality is effected. I have also tried copying the video to my desktop and then dragging and dropping onto the drive...same problem. Any suggestions? I would like to save everything to my external drive so that I can delete all of iphoto library and then reimport to correct a few things.

The file sizes are identical. In the finder I did a search for all .mov files. Then when they came up, I went through them and named each one so that they would be easier to find. I am a new mac user and am used to windows. I realized later that I should not have done this....with a mac files should be named within iphoto app...not finder....When I went to open the videos in iphoto, it wouldn't allow me. I had to go into finder, copy to desktop and reimport into iphoto. Then the videos worked again. However, I had the problem with the poor video quality when copied to external drive before that. Actually the first problem I had was when I copied to ext drive...videos were copying as an image...so I learned that you have to change "kind" to original before exporting....then that problem was solved...now they are videos, not images but not of a great quality. Skips, sound and images are not in sync...etc...

When exporting keynote to quicktime it is crap. why?

when exporting keynote to quicktime, it is really jumpy/jittery WHY!?!?!?
need help

Same thing happening to me.
Seems like it's a quicktime bug.
I see some discussion at http://www.jem-thematic.net/en/node/871
It seems to indicate the only way is to downgrade from QT from 7.5 to 7.4.5... and, if you use iMovie, this will also break iMovie, you'd need to reinstall... UGH.
Sean

Can i remove white line that appears in between 2 videos when i am using video next to video

can i remove white line that appears in between 2 videos when i am using video next to video

The easiest answer would be to just get a Friskars cutter or something similar. I have one like this that I use to cut my photos apart. I found mine at a Walmart in either the scrapbook aisle or the hobby aisle.
However, if you are determined to make a custom picture package you can try making a custom layout with a text editor. I know you can control the white space amount but not sure if you can totally eliminate it.
A simple text editor will work...notepad works for this on Windows...not sure what is comparable on the mac.
In PSE3, the layouts are found following this path Adobe<Photoshop Elements 3.0<Shared Assets<Layouts...note there is also a folder titled Layouts readmes which shows the formula to edit the layouts.
Here is a link that details how to create a picture package layout using a text editor:
http://www.graficalicus.com/index.php?name=News&file=article&sid=8&theme=Printer
Caution: Make sure you save your custom layout with a new name so you don't overwrite the ones that ship with elements.

I am trying to create a video of my desktop using Quicktime (10.0). I have no sound. I have checked my system preferences and everything looks good there. Why am I lacking sound on my video?

I am trying to create a video of my desktop using Quicktime (10.0). I have no sound. I have checked my system preferences and everything looks good there. Why am I lacking sound on my video?

You might also post this question in the Quicktime forum https://discussions.apple.com/community/mac_os/quicktime

When exporting as a quicktime movie, final cut pro crashes!

When exporting as a quicktime movie, final cut pro crashes about 3/4ths the way through the 12 hour process. I'm saving it to a La Cie 500 GB disc by fire wire. It's worked before but after I converted one SD sequence (that was shot in HD)to a HD sequence, I haven't been able to export it and it won't play straight at anything bigger than 25% size. Please if you have any advice I won't forget it. I'm trying to export as ProHD 1060i.

I converted one SD sequence (that was shot in HD)to a HD sequence
How, exactly? And what were the settings of your new HD sequence? DVCPRO HD 1080 60i?

What settings to use when exporting HD into QuickTime Movie

This help call goes out to any Mac user with Final Cut. I need help!!!
I have a Mac G5 and use Final Cut Pro V. 5.1.4. I Just bought a Canon XH A1 and filmed a few test shoots. Then downloaded to FC Pro. I have been trying to export using QuickTime Conversion. Every setting I have tried comes out more or less square. HELP!!!!
My Settings:
In Easy Setup - HDV - 1080i60 FireWire Basic
Under Sequence the setting is:
Frame Size - HD (1440X1080) (16:9)
Pixel Aspect Ratio - HD 1440X1080
No check mark in Anamorphic 16:9
Field Dominance- Lower
Editing Timebase - 29.97
QuickTime Video Settings:
Compression - Motion JPEG B
Under Export - using QuickTime Conversion - QuickTime Movie - Options - Video Settings:
I tied:
HDV 1080i60 and 50
Motion JPEG A and B
DVCPRO HD 1080i60
All settings come out squarish!!!

Hi Patrick,
Thanks for the info. But I can not get any setting to come out looking widescreen. All settings come out square looking. I have tried every setting I can think of but all the QuickTime exported movies come looking like (i.e.: 800X854) more box than widescreen. I think it must be some setting I do not know about or some combination or possibly the capture setting (easy setup).
Thanks for your help.

Digital noise flashes in video when exporting a Quicktime.

FCP 6.06 - When exporting an SD QT for use in IDVD, I end up with flashes of multicolor video noise that is one or two frames long. Happened most recently four times in a thirty minute video. Source video is a variety of SD formats, Mini DV and DV/DVCPro. Anyone else see it or know who to fix it?

They are on the export. When I export again, they are in different places. Usually I can get a clean export after two or three tries if I bring the QT in and replace the glitches with the original timeline. Not an optimal fix I know. I have tried it with two different macs so the problem must be in the external drives or the cables as you suggest. This is an ongoing, years long contract and the media is spread over 5 drives.
I guess my next move would be to figure out if the glitched scenes all come from one specific drive or cable chain. Make sense?
Or I could spend money and consolidate all of the footage on one new modern Firewire 800 drive to go with my new Mac. Business doesn't quite allow too many expenditures right now unfortunately.

Issue : How to get better definition of fonts/typography in Keynote when exporting to HD Quicktime ?

Hello,
I understand there are no possibilities to "add" a vector button to future keynote allowing crisper and smoother fonts. However, when writing texts with effects in a Keynote presentation, and exporting it to Quicktime , whatever the resolutions chosen and clors and settings, still,effects are smooths, but fonts/typography/texts are not clean, crisp and when using a big display in full screen , the .mov or .mpeg4 outcome still always displays poor resolution for text.
Anyone could suggest something ? I want to be able to choose my texts effects on Keynote, while securing an outstanding fonts/texts resolution and apperance when in HD movie, quicktime or else.
Thanks a million for any suggestions guys !
Isa

I have several video clips from iStockPhoto. I don't know what camera's/settings were used, but know that they are all 640x360 px and vary between 25 fps and 30 fps. I also have 3 still images that I have insterted that I formatted to be 640x360 to keep everything the same size. Everything appears correct when viewing the project as I've built it. I'm attaching a few screen shots of the most recent settings for export, though these are not the only that I have tried. Everything comes out with the same result.
I can't insert screen shots of my settings for some reason (?) but here is some info on my most recent try. I chose to export as a Microsoft DV AVI. Then in the Video options I'm using the DV NTSC codec. For size, I chose the D1/NTSC Widescreen 16:9 (1.2) option.
As for other times I've tried this, there are only 2 other codecs to choose from when saving as a DV AVI. I've tried both of them too. Everything has had the same result. I've tried a Quicktime file as well.
Does anyone have a suggestion as to the best file/codec/setting combination?
Thanks,
Holli

IMovie 08 cutting off the end of my video when exporting

First off, I'm running 10.5.3, iMovie 7.1.2, iDVD 7.0.2 on a MB Pro. I have a 256mg nVidia video card, 4gigs of RAM and about 55Gigs of space left on my hard drive. The movie is about 5-9gigs in size-I made sure everything was updated before I started. I created a 45 min movie in iMovie and exported it via-"export using QuickTime." Under "options->settings" I chose Apple Intermediate Codec (frame rate current, compressor-other) with the default settings for AIC. It takes about 35 minutes to process. I import the movie into iDVD via drag-and-drop where I want the movie to go in the menu. All the menu links, music and buttons work. I test the movie and its flawless up until the very end where I have the credits. It plays all the credits except the second to last one. The one that failing is a scrolling credit that lasts the maximum 60 seconds and the last credit/frame of the video is a non-scrolling screen that lasts for 6 seconds. This 6 second credit/final frame is fine. The whole movie is exactly 45:56sec. What happens is that the movie will play through all the credits and once it gets to flawed one, instead of scrolling words it scrolls a solid white block up the screen where all the words should be. I've tried the whole share/import to iDVD twice and actually let it burn to a disc once. Same problems. I have tried exporting to the media browser as well, same problem. The video has the issue once it's exported (so the problem is not in iDVD 08). ANY tips or ideas would be welcome. Sorry if there is a ton of useless info, not sure what's relevant and what isn't. Can't find anything specific to my issue in other posts.
(I posted this in iDVD before I figured out that the problem was with iMovie and not iDVD)
THANK YOU!!!
Luke

Ditto white screen problem.
I am using iMovie 08 for a 23 minute photo-music slideshow for more control over placement and my music.
The final scrolling credits are 60 seconds long over a photo that is 59 seconds long. I have a wipe right and a new photo and the credits/music end. Everything plays well in imovie, but on the DVD i burn with iDVD, there is a white screen where the credits should be.
Applecare suggested changing to another photo. I did. No change, another DVD coaster. Applecare suggested changing the jpg photo to tiff. I did, no change, another DVD coaster.
I exported again in Media Browser, different name, but got the same white screen.
The 5 other titles in the project are fine in iDVD. When I play it on my TV, it looks fantastic, except for that last white screen and no credits.
Any suggestions?
2.5 Core 2 Duo MBP, 2 gB RAM, all software updates complete, iMovie 08

Exported Project via Quicktime Conversion-Some scenes "tear" at the top

I have completed a 17 min project made up mostly of photo/stills. Some have motion added some dont---it doesn't seem to matter to my problem: when I exported the project using Quick Time Conversion I noticed as I checked it prior to using iDVD to burn it to DVD that during cross dissolves and some other transitions there was a "digitized tearing" or pixels slow in locking into place in the upper 1/5th or so of the screen. I had not noticed this problem in previewing the rendered project prior to export. Using FCE v3.5HD. Anyone seen this problem? Is there a problem with some of the transitions or was it something that occurred in the export? I tried to burn to DVD via iDVD so I could see if the problem was off the top of the screen, but apprently I did something wrong during use of iDVD. When the iMac ejected the DVD after burn, I tried playing on a set-top and it wouldn't play, nor could I get it to play in the iMac. I also had difficulty getting the iMac to eject this DVD.

It sounds as if you have multiple problems here. The first problem is that QuickTime Conversion is not the way to export to iDVD. You should export to QuickTime Movie.

Pixelated video when export projects using QUICKTIME COMPRSESION.

Similar Messages

Maybe you are looking for