Pixelation of video when subtitles come up

Hi
Using FCE3.5 and I have my main clips in the V1 channel. I've superimposed subtitle text generator clips in the V2 channel to put people's names and job titles in when they are on screen. When the subtitle comes up it pixelates the V1 video clips until the title clip ends. Have tried adjusting the transparency of the title clip to 90% as suggested in one guide I have, but no change. The background for the title clip is the default black, I wonder if this is causing the problem. What have I done wrong?!

A properly made title that's been properly exported and encoded shouldn't do that. Sorry I can't tell without seeing it.

Similar Messages

  • Pixelated vod only when furnace comes on

    Here is an interesting issue that I've had since fios was first installed.  I get pixelated (blocky is a better description) video on demand when the furnace kicks on only.  The rest of the time it looks perfect.  It happens to both of my set top boxes which are on each floor of my house.  The furnace is on its own circuit.  I did try plugging the ONT and the router into different plugs just in case.  I even tried ferite cores around the coax as well as the power cables for the furnace and ONT. Also, all the coax cables seem to be very tight.  I can easily reproduce this issue by simply turning the furnace on while watching VOD.  Any ideas?  Thanks!
    Solved!
    Go to Solution.

    What you are experiencing is electrical interference from the furnace that is effecting the coaxial cabling.

  • I have downloaded a movie with subtitle to iMovie. When playing the video, the subtitle does not show up through the entire video. It happens to my Mac Air and Mac Pro.

    I have downloaded a video with subtitle. When playing the edited video, the subtitle does not show up in the entire video. The subtitle comes and goes in the video.I have tried with my Mac Pro and Mac Air, with the same result. I have downloaded movie with subtitle before and never had this problem. Please advise.

    I'm not very knowledgable on this but subtitles are sometimes on a separate track from the main movie.  Try opening the downloaded video in Quicktime Player and saving it - you may be asked if you want to "flatten movie".  Choose to do this.  The resulting movie will probably now work OK.  Others may be able to supply more comprehensive instructions.
    Geoff.

  • Pixelation problems occurs in my videos when using adobe flash but using chromes pepper flash no problemes so its definitely adobe problems on my WIndows 8.1

    pixelation problems occurs in my videos when using adobe flash but using chromes pepper flash no problemes so its definitely adobe problems on my WIndows 8.1

    Problem is:
    Flash Player for IE11 (which is the worst browser ever developed - BAR NONE) is a Microsoft product, when it comes right down to it.
    Adobe writes the base code and yes, they do collaborate on updates for it, but the gang in Redmond alter the plug-in and add "proprietary" code before embedding it, and at that point it's "their baby".
    There are two (2) registry keys - 1 for 32 bit IE and the other for 64 bit IE, as well as a KB patch that prevent all but the most experienced Windows users from ever touching the Flash Player plug-in for IE. So there's NO WAY you could have done a clean install of the ActiveX plug-in in Windows 8. Unless you're an uber-geek, you can only update it through Windows Update.
    WIn 8 is an abomination and IE11 made it worse. IE has always been the "problem child" of browsers, failing to handle CSS, Javascript, some PHP and most design "tweaks" that good webmasters can use with other browsers, trouble free.
    I have IE8 on XP, 9 on VIsta, 11 on 7, 10 on 8 and 11 on 8.1... but they're all for testing only. I'd have to be out of my mind to ever think of using IE as my primary browser. ActiveX controls have to be disabled formost stuff and that opens millions of security holes in IE.
    You've got a good video card and a decent sound card. It's a shame to waste them on a pile of garbage like IE, just because it came with Windows.

  • On my iPod touch (5th generation) it won't let me watch any video's off any Internet sources eg Facebook twitter and YouTube. When I click on the video it just comes up saying 'this operation could not be continued'?

    On my iPod touch (5th generation) it won't let me watch any video's off any Internet sources eg Facebook twitter and YouTube. When I click on the video it just comes up saying 'this operation could not be continued'?

    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:
    iOS: How to back up
    - Restore to factory settings/new iOS device.

  • As im recording videos on Photo Booth, my movements seem late. then when i play back the video, the sound comes in really late. how do i fix this?

    theres like a 5 second delay from when i say something to when the sound of my voice actually comes in when i play back movies in photobooth.i tried restarting my computer and even turning on *auto flip new items. when i turn that on the problem is fixed for only one video. when i try to record the next one its back to the delay. is there anyway to trouble shoot this? or do i have to take my mac to the apple store. to top it all off ive only had my computer for 5 days. help please !!!!

    I had the same problem since my moutain lion update, too.
    I fixed it in the following way.
    -Search for utilities on the HELP option on the top taskbar
    - Go to utilities and open your audio-midi-setup.
    - check your input and output properties
    - Change input and output 44100khz and 16-BIT for both.(these are the most common properties)
    my sound and video are not ouf sync in photo booth anymore.
    let me know if it works for you!
    cheers

  • When I try to make a new video, a window comes up that says,"The operation could not be completed," and then under it, it says,"No other information is available about the problem," what is happening and how do I fix it?

    when I try to make a new video, a window comes up that says,"The operation could not be completed," and then under it, it says,"No other information is available about the problem," what is happening and how do I fix it?

    Hi
    And without info - it's near to impossibly to help. Try my general troubleshooting note:
    Troubleshooting note
    When iMovie doesn't work as intended this can be due to a lot of reasons
    iMovie Pref files got corrupted - trash it/they and iMovie makes new and error free one's
    problem in iMovie Cache folder - trash Cache.mov and Cache.plist
    Creating a new User-Account and log into this
    This forces iMovie to create all pref. and cache files new and error free
    Event or Project got corrupted - try to make a copy and repair
    a Codec is used that doesn't work (even though iMovie and/or iDVD tries to / they fail in the end)
    version miss match of QuickTime Player / iMovie / iDVD
    preferences are wrong - Repair Preferences
    other hard disk problem - Repair Hard Disk (Disk Util tool - but start Mac from ext HD or DVD)
    External hard disks - MUST BE - Mac OS Extended (hfs) formatted to work with Video
    ( UNIX/DOS/FAT32/Mac OS Exchange - works for most other things - but not for Video )
    USB-flash-memories - usually do not work
    Net-work connected hard disks - usually do not work (most often not fast enough and WRONGLY FORMATTES as DOS etc)
    iPhoto Library got problems - let iPhoto select another one or repair it. Re-build this first then try to re-start iMovie. When iMovie starts-up it first look trough this iPhoto library and if faulty it all Halt’s.
    This You do by
    First -  close iPhoto
    Secondly - on start up of iPhoto - Keep {cmd and alt-keys down}
    Thirdly - now select all five options presented
    THEN - WAIT a long long time (>20 hours are not strange)
    free space on Start-Up (Mac OS) hard disk to low (<1Gb) - I never go under 25Gb free space for SD-Video (4-5 times more for HD)
    external devices interferes - turn off Mac - disconnect all of them and - Start up again and re-try
    GarageBand fix - start GB - play a few notes - Close it again and now try iMovie
    Screen must be set to million-colors
    Third-party plug-ins doesn't work OK
    Run "Cache Out X", clear out all caches and restarts the Mac
    Let Your Mac be turned on during one night. At about midnight there is a set of maintenance programs that runs and tidying up. This might help
    Turn off Your Mac - and disconnect Mains - for about 20-30 minutes - at least this resets the FireWire port.
    In QuickTime - DivX, 3ivx codec, Flip4Mac, Perian etc - might be problematic - temporarily move them out and re-try
    (I deleted the file "3ivxVideoCodec.component" located in Mac HD/Library/Quicktime and this resolved my issue.)
    buenrodri wrote
    I solved the problem by removing the file: 3ivxVideoCodec.component. after that, up-dated iMovie runs ok.
    Last resort: Trash all of iMovie and re-install it
    Yours Bengt W

  • TS1362 my iTunes wont play music or videos when i open it it comes up with "iTunes has detected a problem with your audio with your configuration AudioVideo playback may not operate properly"

    my iTunes wont play music or videos when i open it it comes up with "iTunes has detected a problem with your audio with your configuration AudioVideo playback may not operate properly" i have uninstalled it and reinstalled it twice and it stil lcomes up with that message every time I opentheiTunes icon I dont knowwhat to do

    Hello Wade,
    This is typically indicative of an issue with the installation of QuickTime on your computer. The following article provides steps for reinstalling QuickTime to resolve the issue.
    "iTunes cannot run because it has detected a problem with your audio configuration"
    Resolution
    QuickTime may need to be reinstalled. Follow the steps below to uninstall QuickTime and then download and install QuickTime using the QuickTime standalone Installer.
    On the Start menu, click Control Panel.
    Follow the steps appropriate for your Windows operating system below.
    Windows XP and Windows 2000: Open the Add or Remove Programs control panel and selectQuickTime in the list of currently installed programs.
    Windows Vista and Windows 7: Click Uninstall a program (or if using Windows Vista's Classic View of the Control Panel, click Programs and Features) and select QuickTime in the list of currently installed programs.
    Click the Remove button (or Uninstall for Windows Vista and Windows 7) and follow the prompts to remove QuickTime from your computer.
    Download QuickTime. Note: There are two options for downloading QuickTime, be sure to select the option that does not include iTunes.
    During the download:
    If you choose to run the installer, proceed to the next step.
    If you choose to save the download, double click the QuickTimeInstaller file, then proceed to next step.
    Follow the on-screen instructions to install QuickTime.
    Reopen iTunes.
    iTunes for Windows: iTunes cannot run because it detects an issue with QuickTime
    http://support.apple.com/kb/TS1371
    Cheers,
    Allen

  • When did video and 3D come out in Photoshop?

    When did video and 3D come out in Photoshop?

    If I recall it was CS3 as that was the first version that had a standard and an extended version.

  • I am calling an xml , that come from rtmp server and i want to play a video . when i pause it show an error of cross domain. what i can i do?

    I am calling an xml , that come from rtmp server and i want to play a video . when i pause it show an error of cross domain. what i can i do?

    Please quote the exact error message, word-for-word, verbatim.
    What is your operating system?
    What version of Lightroom?

  • When capturing video it always comes in dark

    I have noticed that when capturing video it always comes in darker then the original video source.  I have used the Canopus ADC  as well as a JVC BR-HD50 unit.  I can't figure out what to do.  I have run all video through Calibrated CRT's and everything looks great.  ANy advice or a simple correction would be great.

    I'm having a hard time understanding this post.
    Which Canopus ADVC and what is the BR-HD50, does it have proc amp/TBC capabilities?  If so, were those settings reset to unity before capture?
    What does "running your video through Calibrated CRT's" mean?  I'm assuming it means you've QC'd the video before capturing so you know what it looks like and then are viewing it through a video I/O on your computer to the same production monitor?
    This leads to my next question; how are you judging that your captured video is too dark?

  • I would like to know when the slow motion video recording will come in 5c. in which update u will release it.

    Dear sir ,
    i would like to know when the slow motion video recording will come in 5c. in which update u will release it.

    I'm afraid the processor in the iPhone 5c does not support that feature. Since you can't change the hardware setup inside the phone, this will probably not be introduced at all for this model.

  • TS3989 how come I'm not seeing my iphone photos and videos when I og in to icloud on my PC or online? When I log in to icloud the photos icon is missing.  I have photostream and icloud activated on my iphone..

    how come I'm not seeing my iphone photos and videos when Iog in to icloud on my PC or online? When I log in to icloud the photos icon is missing.  I have photostream and icloud activated on my iphone..

    There is no way to view your photos via iCloud.com. Videos are not uploaded.
    Photo Stream merely "pushes" the photos to your other devices.

  • When IOS7 comes out, will the current iPhone 5 and iPad mini have the finger scanner option, or is it just the new 5S, because in the release videos, they showed an on screen finger scanner, so I was curious whether older models will have this function?

    Please Answer
    When IOS7 comes out, will the current iPhone 5 and iPad mini have the finger scanner option, or is it just the new 5S, because in the release videos, they showed an on screen finger scanner, so I was curious whether older models will have this function?

    The fingerprint scanner will be a function of new hardware.

  • Cast in DMM integrated to IPTV----need some tips to improve the channel streams through 4400 DMP. Now the channel streams look little pixelated. Video not sharp...

    Hi,
    Some one kindly suggest a solution for the below issue.
    In one of my customer places we are using the Cast module in DMM 5.2.2 to integrate with the IPTV.
    So the IPTV channel streams when it comes to the LCD its not sharp.
    The feeds are a bit pixelated and also the scrolling news texts from the IPTV channels looks a little weird.
    When we browse the channels using the remote from the Menu the streams coming on the small window on the LCD screen is good but when we put the video to full-screen this pixelation happens.
    The streams are decoded using 4400 DMP and using HDMI connection.
    The receiver used is D9854 and the DCM used is D9900.
    I tried by changing the DMP display parameters but this was not resolved.
    We checked the DCM parameters and verified. The DCM parameters are correct and  when we stream the channels using VLC on our laptop the stream is good.
    So I kindly request to suggest some of the rectification techniques and as such we can resolve this

    JD - I appreciate the feedback - as an update, the customer is still adamant that the DMP is to be used only for digital signs and that now he expects Cast to run on all his PCs (I'm thinking Show and Share is the solution for this).  I try to only "know what I know" and not assume certain things - but this language seems pretty clear:
    "Features of Cisco Cast help your organization to deliver video-on-demand and live broadcast TV channels over IP networks to presentation systems that you connect to DMPs."
    http://www.cisco.com/en/US/docs/video/digital_media_systems/5_x/5_2/dmm/user/guide/cast/welcome.html
    To me that implies that cast delivery is done explicitly through DMPs but doesn't come out and *say specifically* such - but the way I remember doing it - you just publish your Cast setup to the DMP - there is no "cast server" that you can browse to per se and manipulate the guide, etc in that manner.  I'm always open to the idea that there's something I don't know - the IT business has humbled me many times - but this seems awfully straight forward to me.
    I'm stuck with the 2200's for cast - I have to try and make them work.  I assume the procedure is to link a stream to a multicast group address, then configure that as a channel target within Cast?  Never done it for real before - need to know by tomorrow ~noon.  Is there any reason why the 2200s would simply NOT work?
    Have you had success with remote control emulation?  I don't even know if the customer has UCM, but I have been informed that Cast is controllable by a mouse or keyboard (another assertion I'm 99.999% is incorrect) so I need to quit worrying about a remote.
    If I sound terrified, it's because I am.  Thanks for all the help.  I'm not confused yet because so far I've been right about everything I think I know, but when expectations don't line up with reality, that's when things get uncomfortable.

Maybe you are looking for