PIXMA MP 530 will not print with win7 64 PC

My PIXMA MP 530 is connected via usb through a Linksys EA 6500 usb router. There are two PC's connected wired in this network. One uses Windows 7 32 bit and the other uses Windows 7 64bit. Cisco VUSB software is used to connect the two PCs to the printer. The Windows 7 32bit PC connects and prints fine but the 64bit PC says it is connected but will not print. I have updated the drivers and no luck. I have talked with Cisco tech service but couldnt resolve my problem and said I would need to buy a new printer. The 64bit PC does print when shared through the 32bit PC. Can this be fixed or go with a new printer?

Hi VlcV50,
If Linksys is saying the only way to fix the issue is to upgrade the printer, I would have to agree with them. The PIXMA MP530 doesn't have it own built in networking capabilities, so in your case it's relying on the VUSB software from Linksys to do the networking job. It sounds like either the VUSB software isn't compatible with the 64 bit version of Windows 7, or there is a limitation in their software in the 64 bit version that doesn't exist in the 32 bit version that is preventing the software from sending the printer information across the network.
Fortunately the vast majority of our current models have built in networking support so you can connect any of them to the router either via Ethernet or via WiFi if the printer doesn't have an ethernet connection or you prefer to use it wirelessly to save on cabling.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Similar Messages

Elements 11 will not print with Epson R2000?

Cannot make Elements 11 work with new Epson r2000 printer. Prompt on screen states it is not compatible or settings are not correct. Epson tech support worked on it, said to contact without success, said to contact Adobe. Printer works fine on all other applications. Help please.

Thanks again.
Richard
Date: Thu, 12 Sep 2013 08:49:39 -0700
From: [email protected]
To: [email protected]
Subject: Elements 11 will not print with Epson R2000?
    Re: Elements 11 will not print with Epson R2000?
    created by A.T. Romano in Premiere Elements - View the full discussion
Ollie37
Thanks for the follow up.
Barbara Brundage in the Photoshop Elements Forum will probably have the answer to your Photoshop Elements Epson scanner issue. Look into that Twain driver. She will give you good input on all this.
Also, see your other thread about Adobe telephone contact information. I have posted in that other thread also.
ATR
     Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5676121#5676121
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5676121#5676121
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5676121#5676121. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Premiere Elements by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Hp 1315 will not print with 10.6.7

I cannot find any answers to this strange set of circumstances.
I had an old iMac and an hp 1315 all-in-one printer, and everything worked fine. I recently bought a new iMac with OS 10.6.7, and, rather than reinstalling the printer software, I just plugged the old printer into the USB port on the new iMac. The printer worked fine but the device would not scan. I have since learned that 10.6.7 supports printing ONLY on this device. So far so good, but this is where things get strange.
I wanted to scan some pictures, so I got out the old software CD that came with the printer and installed it in my new iMac. The result was that the device was now able to scan. I was happy about this until I discovered that the 1315 now will not print. I have done everything I can think of, including:
-- uninstalling the hp software
-- downloading the most recent driver from the HP website
-- deleting the printer from the Print & Fax window and then adding it again
-- running the "Reset Printing System" on the Print & Fax window
-- running "Software Update"
-- unplugging, replugging, restarting, etc.
-- running the test page on the printer
-- using the device to copy (i.e., using it separate from the computer)
-- checking to see that there are no lights blinking on the device and that it has toner and paper
The Print & Fax window shows me that my 1315 is "Idle" and is the "Last Printer Used," and it has the green light next to it that should indicate that there are no issues with the printer. But when I try and print something, it doesn't print, and the job status is simply "Error."
I am fine with using this device as a printer only, like I did up until yesterday. I have another scanner, and if I had known this would happen I would used it and would never have touched the 1315 or messed with its scanning function.
I must be able to print things for my business. Can anyone help me.

Download and use the updated HP software from their web site, don't use the disk.
You might have to perform some of the steps here, including trying a new user and #18 Resintall Just OS X to kick out the traces
Step by Step to fix your Mac

Why will my epson artisan 810 will not print with ipad?

Why will my epson artisan 810 not print with iPad?

Because it is not a Airprint enabled printer.
http://support.apple.com/kb/ht4356

H-P Laserjet 4L printer will not print with Windows 7 operating system. Need help

I have an H-P Laserjet 4L printer that worked fine with a Dell PC and Windows XP. But, it no longer worked when the PC was updated to Windows7. I was advised to buy an adapter that would accept the H-P plug and connect to the PC by means of a USB port. I did that, but the H-P still will not print. Anyone know what to do about this problem?
EugeneZ

Hello EugeneZ,
Welcome to the HP Support Forums!
To get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial product. You can do this at Commercial LaserJet Forums.
The support page for your product may be helpful in the meantime: HP LaserJet 4L/mL Printer series
I hope this helps!
JERENDS
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

My epson stylist 3880 will not print with Photoshop CC on Mac OS 10.9.3. I've already talked to epson, the printer works with Preview.

There is nothing wrong with the printer or drivers. Something is wrong with Photoshop CC. The error box says:
"There was an error opening your printer. Printing functions will not be available until you have selected a printer and reopened any documents."
Any suggestions?

Hello charlottedk, and welcome to the HP Forums, I hope you enjoy your experience!
I see you are having cartridge and printhead problems. I would like to try and assist.
I would suggest performing a power reset. Disconnect the power cord from the printer and the power outlet, then wait 60 seconds. After 60 seconds, plug the printer back in. Ensure you plug the printer directly to a wall outlet. Make sure to bypass any sort of surge protector or power bar.
I would also recommend following the steps in this document on an 'Incompatible Print Cartridge' or 'Print Cartridge Problem' Message Displays on the Computer or P...
Good luck and please let me know the results of your troubleshooting steps. Thank you for posting on the HP Forums!
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

HP6380 will not print with Windows 7 new install

I have an HP 6380 All-in-one printer. It has never given me any problem when
printing in Vista. We purchased a new laptop for the Wife with Win 7. I
installed the printer on there with no problems.
I then decided to upgrade my laptop to 7 Ultimate. What I did was set my laptop as a dual boot machine and Win7 then became a full install, not upgrade.
When I did network printer discovery, 7 performed a search, found the printer,
and set it up. I did the test page print with success. I could not print
anything past that point and subsequent test pages failed.
I went to the HP web site and found a driver download that was supposed to
include 7 support. The installed printer was removed and I ran the new setup.
Still nothing past the initial test page would print. Further research on the HP
site made reference to a patch and reboot which did not fix the problem. There
was another utility on HP site that removed all installed printer files to allow
a fresh install, no luck.
At this point I decided to compare the printer properties between the Wife's
system and mine. Her system called to a port labeled WSD Port HP38147 (HP
Photosmart 6300 Series).
On mine, the reference was to a TC/IP port with the network address of
192.168.1.102.
I tried to change this to a local port also.
There was NO option for a WSD port, and when I tried to add a port, the only
options were Local or TCP/IP.
For now I am having to save items for printing, then go to my Vista via
dual-boot and print there, a royal PIA.
In Vista BTW the port is labeled Standard TC/IP port HP Photosmart C6300 Series.

Did you delete the printer in Devices and Printers and re-add it?
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Dell laptop with xp operating system will not print with new hp 8610 wireless printer.

Downloaded software from disk and from hp website everything went smoothly except would not print test page or any other document. used scan doctor everything checked out told me to run test page would still not print. told me to print internal test page and it printed it. said had software problem and to reinstall. did so many time still no luck......
where is hp help desk to solve these problems have spent 5 hours with this issue. I have a cannon mx410 wireless and works perfectly. help!!!!!!!

I am experiencing the same issue with Generic desktop PC with Windows XP Professional SP3.
Scan ok. but:-
- fails to print test page (Error: "Test page failed to print. Would you like to view the print troubleshooter for assistance?")
- fails to print from notepad (Error: "The Parameter is incorrect")
Tried Ethernet, wireless and USB connections and all exhibit same behaviour.
Uninstalled and re-installed multiple times.

Captivate 6 Certificates Will Not Print with Date, Score or Username

We are currently using Adobe Captivate 6 to create training modules for new employees. We are inserting the certificate widget at the end of each module that includes the username, the course title, and the date and score variable are turned on. However, after we publish the file (as an .exe) and try to print the certificate, the username, date and score do not print out. They are all visible on the screen until you click print - then they disappear. If you click the back arrow and go to the previous slide then return to the certificate they are visible again but disappear when you try to print. Is there anyway around this or a way to correct this issue?

As far as I know it's not fixed. I had to find an alternative solution. I ended up creating my own certificate, then inserted it as a picture. Next I added the textboxes to automatically generate the username, date, and quiz score (if applicable) onto the lines of the certificate. I inserted the print widget (which prints only a screen shot of the slide). Since everything prints out as landscaped, on the computer, I went to devices and printers, selected the default printer we are using, went to settings/options and marked the paper orientation as 'landscape' (this only works because we have specific laptops dedicated to using the captivate training software, otherwise, everything anyone would print would end up like this, or they would have to know to change the setting when printing, but like your situation, not everyone here would know how to do that), Once my own certificate was created, I was able to just copy that slide and paste it into any other project that needed it and then just modify the title and add the print widget (i dont recall the widget copying over). Another issue I had when doing this was getting the right resolution on the project, if the resolution is too high, the certificate will be larger than the paper when printing (or if its too low it will be much smaller than the paper). Once I found the right resolution though I made sure that was my default when starting a project.

New Epson WF 7620 will not print with Macbook Air, receive "Print File Was Not Accepted" message.

Hello! To anyone who tries to help me, thank you in advance!
I brought home a new Epson WF 7620 yesterday and did all the necessary stuff, installing it with my Macbook Air (Mac OS X ; 10.7.4.). I installed the software from the site, added the printer to my printer list, enabled "print sharing" and connected it to my wifi network. I am trying to use it wirelessly.
I tried to print a test page of a regular PNG image, but I am receiving the "Print File Was Not Accepted" message in my printer queue. I have changed the file type a couple times to JPG and PDF but more of the same. I have also reset the printer, and have repaired the disk permissions in the Disk Utility to try and get it to work.
None of this seems to be working, suggestions very appreciated!
Thanks
MP

Try Linc's suggestion first. That should cure your issue. If not, here's something else to consider:
PrinterMaccer wrote:
I installed the software from the site ...
Apple keeps a set of current software for Epson printers. You should start by going to System Preferences > Printers & Scanners and delete the printer from the list (using the "-" key). Then download Apple's software version from here:
Epson Printer Drivers v2.18 for OS X
Finally, set up the printer as shown here:
OS X: Connecting a Wi-Fi printer to your Wi-Fi network

Epson xp 202 will not print with wifi

using os 10.7.3. Can ping printer ok but print box indicates printer off line. Prints ok with usb cable but not with wifi
cheers

Fixed.
Thank you Misery. As I am juust starting out with Arch I was unaware of PKGBUILD/makepkg system. You have *greatly* enhanced my Arch experience.
I am, however, still puzzled as to why I got the 'file not found' message from ldd. I checked dependencies with objdump and installed the one (old)libjpeg it wanted, but ldd still refused to run giving me 'file not found'!

Epson RX620 will not print with my MacBook Pro. Error:/ System/Library/ Pri

I can't get my Epson RX620 to print using my MacBook Pro. It prints fine using my G5 and all info was migrated from the G5 to the MacBook Pro. But I get this error message, Error:/ System/Library/ Pri... can anyone help?

skeeter694 wrote:
I can't get my Epson RX620 to print using my MacBook Pro. It prints fine using my G5 and all info was migrated from the G5 to the MacBook Pro. But I get this error message, Error:/ System/Library/ Pri...
Welcome to Apple's discussion groups.
What's the rest of that error message? Posting what you did is similar to posting as an error message the text "I'm having trouble with ..." with nothing following.
I'd try several things until things work:
1) Open the Print & Fax panel of System Preferences. Right-click on a printer entry and choose "Reset printing system".
2) Delete the entry for your printer, then add it back.
3) Check the Epson Web site for a recent driver for your printer. Download it, then first run it in "uninstall" move, then in "install" mode.
I'll be personally interested in what you learn. I have a relative who has an RX620 and 10.6.4, but I'm not sure he's tried to print anything yet.

Pixma mx 922 will not print a pic from the lower tray. Cannot put 8x10 paper in upper tray.

I cannot print a picture using the paper in the lower tray and cannot make 8x10 paper fit in the upper tray. Is this normal for this printer. I should have stayed with a HP printer. I am using an iPad 2.

Actually both wireless problems are mentioned frequently on the web, by many people. I was finally able to figure a solution out because there were so many threads to choose from when you Google it...never had problems with any other wireless equipment connecting in all of the years we have used them, just this printer...As I said, a fan of Canon in all forms for years. Just not this printer. Regret giving up the MX850. Have gained nothing with this printer, techinically or print quality wise.. Feels like a step back, actually. And many others have mentioned how agonizingly long it takes to fire up to print or when you change settings. It is a major complaint with this printer. As to the Airprint info of the 4"x6" only printing, I was not aware of that. Maybe if printer manufacturers put that info in their sales material in the section dealing with Airprint, we would be able to manage expectations better....

HP Laserjet 3050 will not print with 10.6

I installed Snow Leopard this morning and voila my HP 3050 Laser jet no longer prints from the iMac. The printer is connected via usb cable to the Mac
I've tried un-installing drivers, doing a custom OSX 10.6 custom install of just print drivers. Tried the drivers apple suggested, tried generic postscript and no luck printing.
I see lots of posts about similiar issues. Anyone with a HP3050 figure out how to get it to print?
David

I solved the problem.
I uninstalled the Hp Utilities, deleted the hp3050 from the printers and fax list. Unplugged the power for the printer and unplugged the USB cable from the printer to the iMac.
Restarted the iMac, when it finished booting I plugged in the printer power cord then the usb cable.
Opened the printers and fax folder and added the HP 3050 and I'm printing
so far so good

SDK creating PDF files that will not print with pcl6

We are using the PDF SDK 7.1 to create PDF files from our application on Windows. The PDF files mostly consist of PATH elements representing 2D graphics. We have customers that have trouble printing them from Acrobat on PCL6 printers, they either get a memory error, or an error that there is not enough memory.
As a workaround, they have used Ghostscript to create the PDF files, then they have no problem printing the files. I am at a loss to see what could cause the problem. Are there tools to analyze a PDF file that could help? I tried PDF CanOpener, and it didn't help much.
We are using PDSaveLinearized when we close the document. Any help, ideas or suggestions would be appreciated.
Thanks,
Keith Hafen

What version of Acrobat is being used on what OS platform to print to what PCL6-based printer?

PIXMA MP 530 will not print with win7 64 PC

Similar Messages

Maybe you are looking for