PIXMA MX922-Envelope Printing

I am trying to print a commercial size 10 envelope from Word 2013 document. The envelope contains a table created in Word that extends the full height and width of the envelope with .5 margins on all sides. This printed fine on my HP LaserJet 5 but when I try to print it on the Pixma, the right margin switches from .5 to 1.48" when I go to print and as a result truncates the table. I saw in the fine print that the Pixma 922 does not support borderless envelope printing so I'm thinking maybe there is a built in larger border for envelopes. Has anyone figured out a work around? I attempted to avoid using the "envelope" settings by creating a custom document both in Word and for the printer that is the same size as the envelope. But the same thing happens - the table is truncated. I also attempted to just type text, thinking maybe there was something finicky about the table. But even the text is truncated and the margin overrides whatever I put in to change to 1.48" Very frustrating!

Click Start
Type: 'Print Management'
In the left pane navigate to: Print Servers | PC Name (local) | Drivers
Delete the faulty print driver, or if you're not sure, delete all of the Print Drivers listed. 
Restart and download another or updated driver for your printer from the Canon's web site.
EOS 1Ds Mk III, EOS 1D Mk IV EF 50mm f1.2 L, EF 24-70mm f2.8 L,
EF 70-200mm f2.8 L IS II, Sigma 120-300mm f2.8 EX APO
Photoshop CS6, ACR 9, Lightroom 6

Similar Messages

  • PIXMA MX922 stopped printing

    Have been using it for a couple of weeks.  Today printer is on, it is the default printer in Windows 7.  Sent documents to print; they appear in the printing queue, then it gives "error printing" message.  Went to Canon utility, sent test page, same result.  No error codes showing in printer display.  Printer status is "Ready" when I check it in Devices and Printer.  Turned everything on and off, same results.  
    In summary, printer is connected, no error messages, but no print output.  
    Please help!
    Solved!
    Go to Solution.

    Click Start
    Type: 'Print Management'
    In the left pane navigate to: Print Servers | PC Name (local) | Drivers
    Delete the faulty print driver, or if you're not sure, delete all of the Print Drivers listed. 
    Restart and download another or updated driver for your printer from the Canon's web site.
    EOS 1Ds Mk III, EOS 1D Mk IV EF 50mm f1.2 L, EF 24-70mm f2.8 L,
    EF 70-200mm f2.8 L IS II, Sigma 120-300mm f2.8 EX APO
    Photoshop CS6, ACR 9, Lightroom 6

  • My pixma mx922 is printing orange throughout the page. why?

    every time we print something in color, it has an orange hue throughout.
    Solved!
    Go to Solution.

    Hi sbsproperty,
    You can print a nozzle check pattern from the printer to see if all of the inkjet nozzles are dispensing the ink correctly.  To do this, please follow the steps located here.  Once the pattern is printed, please examine it and compare it to the correctly printed nozzle check pattern here.  If the nozzle check pattern did not print correctly, performing at least one cleaning and two deep cleanings may resolve the issue.  To do this, please follow the steps located here. 
    Should you still experience the issue after performing the cleanings, the printer may require servicing.  Please call or email us using one of the methods on the Contact Us page for further assistance.
    Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

  • Cannot make Canon PIXMA MX922 fax to work with "Windows Fax And Scan" on Windows 7, 8.1

    I have Canon PIXMA MX922 multifunction printer installed wireless on iMac OS X Mavericks. It works great but there is no fax drivers for Mac. I have Windows 7 and Windows 8.1 installed on Parallel Desktop. I am able to print and scan on these machines. I can scan using "Windows Fax and Scan" and other programs including My Image Gardens but no luck with faxing. I can send faxes using print function and chosing a Cannon MX920 series fax driver. The problem is to recieve faxes. I've connected MX922 wireless and wired with no help.
    Does anyone have the same problem? Any ideas?

    Hi Anton,
    thank you for your advice.
    In case this is going to fix itself in 25 hours I will check for the issue then. I'm gonna let you know whether the issues has disappeared.
    But it sounds to me a little bit, like you have been expecting that behaviour? Have you? Especially within a Lab it is very confusing to have test clients which appear fully functional 25 hours after the setup has been succeeded.
    I've followed your annotation and posted the log files on the Connect portal.
    Thx
    Peter

  • PIXMA mx922 prints blurry.

    Our PIXMA mx922 prints blurry.  I have already cleaned the encoding strip.   When I print a black and white text document. some lines on a printed document are sharp and crisp, while others are faint and blurry.  These crisp and blurry lines alternate all the way down the page.  When I print a mixed color and black text document (such as a screen capture of this current page), the color sections are sharp but the black ink sections are blurry as mentioned previously. The blurry text almost looks like a double image of the letters. Thank you in advance for any suggestions.

    Encoder strip would be the big culprint here.
    http://kbsupport.cusa.canon.com/system/selfservice.controller?CONFIGURATION=1011&PARTITION_ID=1&secureFlag=false&TIMEZONE_OFFSET=&CMD=VIEW_ARTICLE&ARTICLE_ID=60939

  • Excel spreadsheet prints incorrectly--lacks grids, some colors--Pixma MX922

    I can't print an Excel Spreadsheet correctly to my Canon Pixma MX922. It comes out lacking borders and lacking some of the colors, even though in print preview it looks perfect. I am using Microsoft Excel 2013 and Windows 7. I just reinstalled the printer driver but this didn't help. I CAN print out photos correctly, but if they are part of a spreadsheet, they print lacking colors, too. Any advice?
    Thanks,
    Shari Shaw

    Thanks for taking the time to reply, John, but that's not the problem. I have gridlines checked. I have done some further checking and I think it's a print-head issue. I'll try cleaning and deep-cleaning the nozzles...
    Thanks again!
    Shari Shaw

  • How do I remove the print head in a PIXMA MX922 printer so I can clean or replace it?

    How do I remove the print head in a PIXMA MX922 printer so I can clean or replace it? The printer clean and deep clean features will not provide print quality corrections.

    Hi Happy,
    To remove the ink tanks and print head from the printer, please follow the steps located here.  Please note that we do not recommend cleaning the print head using any other methods other than the ones built into the printer, as it may do damage to the printer.  If performing at least one cleaning and two deep cleanings on the printer do not resolve the issue, the printer may require servicing; please call or email us at one of the methods on the Contact Us page to obtain your servicing options.
    Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

  • How do I print directly onto an inkjet printable CD using a Pixma MX922?

    How do I print directly onto an inkjet printable CD using a Pixma MX922?  Does Canon have a template for disc labels?

    Hi KSeghorn,
    There is a program that comes with the printer called the My Image Garden program that can assist you with printing onto inkjet printable CDs. To do this, please follow these steps:
    1. Start My Image Garden.
    2. Select the image you want to use for a disc label (CD/DVD/BD).
    3. Click the NEW ART button and select the Disc Label (CD/DVD/BD) option. The Select Theme dialog appears.
    4. Set the Theme, Paper Size and Orientation, then click the OK button. The disc label (CD/DVD/BD) appears in the Create or Open Items edit screen.
    Note: The layout may not be as expected depending on the photo information or analysis results of the selected images.
    5. Edit/adjust the items on the label using the buttons at the bottom of the window according to your preference, then press the PRINT button. The Print Settings dialog appears.
    Note: In the Advanced Settings dialog displayed by clicking Advanced... at the bottom of the screen, you can set the print area. If Advanced... is not displayed, click the right scroll arrow button to display it.
    6. Set the number of copies to print, the printer and paper to use, etc., then click the PRINT button to print.
    For information on loading the printable CDs into the printer, please click here.
    Hope this helps!
    This didn't answer your question or issue? Please call or email us at one of the methods on the Contact Us page for further assistance.
    Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

  • Pixma MX922 - BK appears to be out of alignment. PGBK, C, M, Y all (relatively) perfect.

    Hey all, I've actually submitted this to Canon support, but I thought I'd bring up the issue since it's pretty strange and I would think that anyone familiar with it might see this post and go... "Oh hey, I know that!"
    So... Pixma MX922... I appear to be having issues with BK (not PGBK). Text is distorted, or "fat" (wider than it should be and fuzzy) and if it's small text you can see what appears to be a duplicate offset, what I believe is the difference between the PGBK and BK... it appears the dye black is out of alignment independently from the colors and PGBK as evidenced from the print head check page.
    The solid rectangular bars to the left and right of PGBK are crisp and solid, as is the grid to the right. The bars of black to the left and right of C, M, Y, and BK are distorted, getting fatter to the center of the bar. The actual color samples are all a solid crisp rectangle but the BK pattern is also distended on the sides.
    Here's an example of the print check: i.imgur.com/Bt8SYer.jpg
    Steps I've taken:
    cleaned heads (incl. deep cleaning)
    cleaned timing strip
    aligned heads automatically and manually.
    Ideas?
    Thanks!

    Hi jurassicfrog,
    if performing the alignments, print head cleanings and cleaning of the timing encoder film of the printer did not resolve the error, the printer will require servicing; please call or email us using one of the methods on the Contact Us page for further assistance.
    Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

  • Canon pixma mx922 compatibility issues with Mavericks?

    Thinking of getting canon pixma mx922. Any body had compatibility issues with Mavericks?

    Go to http://support.apple.com/kb/HT3669 for a list of printers that are still supported.
    If you don't see the printer, check Printer software no longer available through Software Update.

  • LAN WAN settings on Pixma MX922

    On my Pixma MX922 I can set either WAN active or LAN active, not both at the same time. I have one desktop - LAN, 1 laptop WAN only, 2 tablets WAN only. Two printers, one is a LaserJet TCP/IP only, the other is the Pixma MX922.
    Any body know how I can print to either printer from the desktop - where I work a lot, and others can print from their laptop or tablet to either printer?
    Router is Archer C7 801.11ac/n/b
    Or if a different Canon Inkjet printer can activate WAN and LAN at the same time I would like to know. Thanks
    [Email address removed per forum guidelines.]

    Hi Pakeha,
    You can install the printer on your laptop and connect your tablets wirelessly using the wireless setup method, then install the printer on your desktop computer, also choosing the wireless connection method during setup, even if the desktop computer is connected to your router via an ethernet cable.  Should you need assistance installing the printer wirelessly, please call or email us using one of the methods on the Contact Us page for further assistance.
    Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

  • Pixma MX922 drops off network, what ports need to be opened

    Pixma MX922 keeps dropping from my wireless network - no matter what I do to configure. Called Canon support and they were not able to resolve issue (offered to replace printer, prefer not to do this - only as last resort).
    I attempted ALL the standard items to resolve (re-install printer, drivers, make static IP (NO DHCP leasing - and my DHCP lease time on router is set to max. time of 2 weeks anyway...), made sure of no firewall issues, etc., etc.) but printer keeps doing this. Can ping the ip, etc., so I know that it exists, but UNLESS I POWER the printer OFF / ON - anything I sent to it will just sit in print queue.  Once I power it off / on - all printing is fine  - only for a few hours or next day - until it happens again...
    Somewhere on this forum another user stated that he resolved the problem by contacting Canon support and they told him specific Ports on his router that had to be opened in order to fix the issue of the printer dropping off wireless network (* he must have had a better tech than the ones I spoke with...).
    Does anyone on this forum know the ports that must be open on the router?  Possibly one or two higher number ip ports such as 1020, or 25466, etc. ?
    Thank you to anyone who may know this and provide.

    Podcasting is not streaming on content, only downloading. It is basically a blog with an attachment in the RSS feed. Only port 80 (normal web port) needs to be able to go through the firewall.

  • Contacts Envelope Print Error

    I have figured out how to print an envelope with a return address, and proper layout even without the bar code (Hello Apple - it's 2015) and the limited text formatting options, but now Contacts prints two envelopes with each print request.
    The problem is that every other envelope prints the addressee name in the line where the street address is on the correctly printed other envelope (which is what I see in preview window).  No street address, city or zip, just the name in the line where the address should be.
    Under the Preview window within the print dialog window is this 'Two addresses()'
    I dont see another address card anywhere for this contact, so where is the other address that I need to delete to stop wasting envelopes?

    Go to your Finder "Go" menu hold the option key to choose "Library".
    Then go to Application Support/AddressBook/AddressBook.data and double-click that.

  • My new HP Pavilion desktop has no usb connection option for my old Canon Pixma iP 2600 printer

    Greetings:
    I can no longer locate the installation disk for my my old Canon Pixma iP 2600 printer.  I'm able to install it w/the add a printer feature in the control panel, but the desktop fails to read that the printer is connected via usb cord.  I'm not finding any option to install it as a usb printer.  Please help asap.  I can't afford to replace the printer, and I have several documents I have to print today or early tomorrow, or there will be dire financial complications for me.  I NEVER had this problem w/Dell.  (the operating system is windows seven, which is exactly what i was running on my older dell model - i have searched this forum and located a similar question, but that querent was able to find a usb option in the drop down menu for port installation.  that option is absent in my attempts).
    Thank you!
    This question was solved.
    View Solution.

    Firelily, welcome to the forum.
    Here is the download page for the driver and the software for the printer.  If you install it, you should be able to print.
    Please click the " Thumbs up + button" if I have helped you and click "Accept as Solution" if your problem is solved.
    Signature:
    HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
    HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
    HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
    HP Photosmart 7520 AIO
    ++++++++++++++++++
    **Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
    Intelligence is God given; Wisdom is the sum of our mistakes!
    I am not an HP employee.

  • Envelope Printing Incorrectly to HP laserjet

    When installing to one of the Mavericks upgrades last year, my old HP laser jet 3700n would no longer print envelopes correctly from either WordMac or from PrintShop3. I blamed the old age of the printer (More than 10 years) and no recent driver made for it. I purchased a new HP LaserJet MFP M476dw but I have the exact same issue. The envelope appears perfect in print preview but when the envelope prints, the text is perpendicular like in portrait mode and mostly off of the envelope. It doesn't matter the size of the envelope. I have tried changing every setting I could find, altering the dimensions to the opposite length/width, changing the orientation of the envelope feed, but I can't get it right. I can't believe I am the only person with this problem. I called HP and after 2 hours on the phone they said they couldn't help me. I'm not very computer literate and really would like help.

    envelope template

Maybe you are looking for