Place frame issue

Hello,
I Have a Created New Fame and Replace it in C:\ProgramData\Adobe\Photoshop Elements\8.0\Photo Creations\frames .....Location
when use that Frame in PE8 its give Error any one have idea where my mistake.
Thanks
Dhiraj

Is this a download you installed? Check that Photo Creations is the correct location. It may need to go in the plug-ins folder. You need to consult the instructions for installing.

Similar Messages

How to overcome "dropped frame" issues on my project

Hey reader,
I have a MacBook Pro 2.4GHz with 250GB hd (85GB free just now) running 10.4.11, FCE HD 3.5 (and QT 7.5.5) and using a Sony Handycam DCR-HC96 (which is works BEAUTIFULLY with iMovie 08 and 6 and is always used with Sony tapes) and I am not able to "capture" the tape content to my MacBook Pro because of the "dropped frame" issue.
The camera is connected to the external hard drive chain via Firewire cable to the MacBook Pro and I was trying to capture to the internal hard drive. I am in the UK and am still struggling to get my head around the different frame rates but initially I got the dreaded "dropped frames were encountered during the last capture attempt" and it just wouldn't work, so I unselected the report dropped frames tab and abort capture in User Preferences as was suggested on here.
Now I get "Capture encountered a problem reading data on your source tape. This could be due to a problem with the tape. Capture has been aborted and your clip has been saved" but the tape is fine (heads are also clean) as I had to (under time pressure, me) use iMovieHD 6 instead and it worked like a CHARM.
What can I do to use this software?
I KNOW I can import the iMovie footage but the disadvantage is the eternal rendering, I guess. I only ever used it once (because of its difficulties) and that was for pre-existing footage from iMovie and it was OK if not perfect. Just had to have a few hours extra for the constant rendering in preview...
Should I try to capture to one of the external hard drives? I read that the internal might be a problem as it is busy with the operating system jobs.
Please and thank you.

I got some dropped frames last night and posted this before noticing your post:
There can be a number of reasons for getting dropped frames during capture.
Yesterday I videoed a relative's wedding (in HDV) and on getting home late I captured the footage into FCP 6.0.3 only to find in a couple of places I got an abort on dropped frames.
This morning I decided to recapture and did so without a single dropped frame.
Why ? ......... there are several possibilities.
It could be that there was some physical problem with the tape or camera heads but I believe it was most likely caused by my camera's power supply.
Last night I used the battery whilst this morning I plugged in the power connector.
I feel that this provided a more constant supply of full power and helped prevent frames from being dropped. (The fact I was using FCP is immaterial as the dropped frames would almost certainly have also occurred in FCE).
From now on I will always use the power connector during transfer to and from the camera.

Dropped frames issue on a G5 2.7DP w/DV footage

Let me first tell you my setup:
G5 2.7 DP
8 GB RAM
WiebeTech TrayDock eSATA 4-bay drive enclosure w/Sonnet 4+4 eSATA PCI Card
(2) 400 GB Seagate Barracudas in the enclosure RAIDed in a striped config using Apple's Disk Utility
10.4
FCP 5
At seemingly random times, playback from the timeline will stutter and stop, thus throwing up the dropped frames dialog box. If I re-play from the same point, it will normally play. This has happened on several current projects in which I'm working in DV. I've also worked on a project in 8bit uncompressed using my Kona LS card with the same drives, and had the same error.
I've had this issue ever since I setup this system--from the first install of FCP5 to the most recent update of 5.0.3, as well as from 10.4.2 to 10.4.3. I've tried turning off the internal Airport card in the G5, and quitting all other programs.
There is a little utility that came with the Kona card to test data rate of your drives. I'm getting well over 100 MB/s Read, and slightly less write rates, so it seems like drive speed isn't an issue.
What is the weak link here? WiebeTech was nice enough to send me a replacement eSATA PCI card, and the issue hasn't gone away, so it wasn't a bad card, although I guess there could be some flaw inherent in all of the cards.
What other steps should I take to try and isolate/solve this problem? This is kind of embarrasing that I can't play DV footage on the timeline without the possibility of dropping frames--even when working with only one layer of video.
I'm capturing video to the eSATA RAID, and my project files/graphics reside on an internal SATA drive in G5 (not the boot drive--I added another seagate 250 gb). Seems like there should be enough throughput in this thing to handle basic edits, but I'm beginning to have my doubts....
Your ideas?????

Clay,
Regarding your statement "My thinking initially about my workflow was to not keep them on the same drive as the footage because my feeling is that the RAID isn't as "safe" as the single 250 GB drive I have inside the G5".
I store all of my media, GFX and project files on whatever FW drive I happen to be using for a project. I NEVER have media for a specific project on two or more drives. For safety's sake, I ALWAYS have my Autosave Vault set to my internal drive, with a relatively high save rate (every 10 min). That way if the FW drive ever failed completely, I'd at least have a recent copy of the project file to work with (even if I have to redigitize the footage or redo the GFX). All I can say is keep all of your media (per project) on one drive - it's been kind of the Bible in this industry for years, and as far as I know it hasn't changed.
As far as RAID's go, I'm no expert. But if I remember correctly, back in my old Avid days we also used to avoid having the media on different striped partitions - something else you may want to try if you're media is spread across a few stripes.
It seems like I've run across more than a few posts here regarding the same problem happening on Dual 2.7's. You may want to do a more thorough search here to see what you come up with. All I can say is I'm running FCP 5.0.3 on a G5 Dual 2.0 with only 2.5 meg of RAM and have had no dropped frame issues.
Try Matt's suggestion of playing some footage off of your boot drive (NOT recommended for everyday use!). If it works then it's got to be a problem with your RAID and not FCP.
Good Luck!
jeff

Official comment from Apple about the drop frame issue?

Is Apple going to firmware fix the skipping drop frame issue on the Apple tv?
Or is it hardware related?
Too many of us seem to have experienced this issue for it not to be addressed.
It shouldn't be difficult to fix.
My 1st gen atv was fine.
I should have kept it.

Hopefully it can be fixed. Seeing as Apple has not even acknowledged it I returned mine yesterday since I was coming up on my 30 day return deadline. At least this way I'm not stuck with a device that has a hardware issue.
As of yesterday I have seen this issue on 10 different New Apple TV units, all on different HD sets, different network setups etc. Half of the owners had never noticed it. Two of those were adamant they did not have the problem and one of those still insisted they didn't after I spotted it multiple times. So while the issue has been present on 100% of the units I have seen, its not necessarily noticeable to everyone. I have noticed its much easier to spot on larger displays and when the display quality itself is higher, for example easier to spot on a higher quality 61" 1080p set than a lower quality 720p 26".
If you have the option I would return the unit. Worse case is your don't have the unit, which is not functioning 1005 anyway, for a short period and then grab it again if the issues get addressed.

Potential workaround for green frame issue

Hi,
We are sorry for the the inconvenience caused by green frame issue on some laptop models.
To work around the issue that some users are experiencing in the 1.6 version on specific machines, current suggestions is to add 3 more lines above the last two lines of shared.xml that is located in the C:\Users\your_username\AppData\Local\Packages\Microsoft.SkypeApp_kzf8qxf38zg5c\LocalState
Note: Make sure Skype is closed (press ALT+F4 with the Skype app open) while you are modifying shared.xml file and make sure you save the changes in the file before starting Skype again.
Also if you don't see AppData folder in C:\Users\your_username go to View tab and check Hidden items checkbox.
</Lib>
</config>
should be replaced with
<Video>
<EnableWideSupport>0</EnableWideSupport>
</Video>
</Lib>
</config>
Please try this and post if it solved your issue.
Thank you in advance

In addition to the above fix, we would be grateful if you were experiencing green video that you help us by doing this:
Please go to Search, type dxdiag and run dxdiag.exe, go to Save All information and send generated DxDiag.txt file to kmudrovcic at hotmail.com.
Thank you in advance

720p60 P2/HD Dropped Frame Issue

I'm having a dropped frame issue in FCP with some P2 720-60p footage. I can't get it to play through a sequence without freezing and giving me a warning. We've narrowed it down to an apparent processor issue. There are two tracks of audio (a stereo pair), and two tracks of music (again, a stereo pair). When we turn off the music, the sequence plays fine. But when the music goes back on, the sequence chokes. The funny thing is, I just did an HD project shot in 24p/n with several tracks of audio and several tracks of video and, aside from needing to render certain things, it played fine.
Any ideas?
Here are the specs:
P2 footage originated in 720/60p
AUDIO/VIDEO SETTINGS:
Sequence Preset: DVCPro HD 720p60
Video Playback: None (there isn't an output card for this computer).
SEQUENCE SETINGS:
Frame Size: 960x720 (HD 960x720 16:9)
Pixel Aspect Ratio: HD (960x720)
Editing Timebase: 59.94
Compressor: DVCPro HD 720p60
Audio Rate: 48 kHz
Depth: 24
Config: Default
Any ideas here?
Thanks,
Tim Walton
KVIE Public Television

Then it's pointing at a throughput problem between the RAID and the server I'll guess. Trouble shooting that could be interesting. Can you move the media to a local drive?
I'd also be interested to see what AJA's read/write speeds are on that RAID from your station...
Post the gear between your mac and the server etc.. whose RAID is it, How is it formatted? Got a model number of each of the devices involved? Mac Server?
Jerry
You've selected the "Easy setup" for the format you're editing too, right?

Rotated image/frame issue

I'm using Frame 8 and Acrobat 3D 8 and having issues with rotated images or frames. When printing to paper, the graphics are fine, but if I print to PDF, the top of the image is cropped. Text lines are visible but the top inch of the imported graphic is not. I wonder if this is a setting in Acrobat or a Frame issue.
Any help would be appreciated.
pat

> I have tried using jpg
Jpeg is a particularly bad format for screen captures. Tiff would be
better; I don't know enough about png. Ages ago, in a much earlier
version, I had trouble with large bitmaps printing properly in Frame
(not exactly the same problem - they were printing fine for about 3/4 of
the page and then it printed all "bunched up" and the bottom 1/4 didn't
print). I started using EPS (bitmap eps, saved from Photoshop). This not
only solved the problem, it had the added benefit of displaying much
faster (because the eps files had only a low-res preview, so Frame
didn't hesitate on each graphic to read in the whole file).
I'd be happy to look at one of your pngs, see if it works here, but I'm
on Frame 7 (just ordered Frame 9), so I'm not sure if my results would
be relevant. Zip and send to kbenson at pegtype dot com
Kenneth Benson
Pegasus Type, Inc.
www.pegtype.com

Re: Define new business places or issuing branches.

Hi All,
I have defined some new business places or issuing branches for one company code. Now I need to do testing for the new defined business places..
Can some one tell me what need to be tested and included in test document for this requirement. Here is the menu path for defining new business places or issuing branches..
spro-cross application components-general application function-cross application document numbering-define issuing branch..
please advice..
regards,
chandu

ooooohh now replays..it's ok
chandu

Graphic Symbol First Frame Issues with Tweening

I'm working on some fairly detailed character animations, and accordingly have made most of the characters parts into graphic symbols. For instance, his hand is a graphic symbol which has multiple frames for each perspective or pose of the fingers, and I set the symbol to the proper frame in the characters main timeline.
I've been having issues, however, when tweening these symbols. I noticed this first when I was working on a jump animation and I just wanted the hand, once its pose is in a state which will be used for the majority of its frames, to tween up and rotate with the arm and body. When I create this tween, however, it forces all other frames of that graphic symbol to be set to that same frame. The start and end frames of the tween are set to the same first frame, and even after trying to manually fix the subsequent frames of the symbol, it wont let me. I've triple checked all my symbol names, frame numbers and settings, and anything else I can think of and everything is in place, so I really have no clue why this is happening.
Does anyone know how to fix this?? Thanks for any help!

Are you using new motion tweens with CS4? If so, then that's "expected" in that new motion does not (yet) support changing symbol frames - only one object and one frame per tween span. You will need to use classic tweens or split the motion span.

Frame issue in Workspace with IE8/XP/Reader 9.4

When a user opens a form from a "to do" in Workspace, the form opens in a frame outside of and superimposed over the normal Workspace interface. This obscures the user action buttons, which stops the process at that user (since they can perform no actions). The "save" button is partially visible and can be clicked, as can the "Task Details" tab.
Any suggestions for how to deal with this framing problem? Obviously the user can access the form from another computer, but if this issue is related to software configuration, I would prefer to resolve it that way, since many users in our environment have this configuration.
Thanks
Toby

I am unable to reproduce the problem on my IE8/XP/Reader 9.4 platform. After updating to Reader 9.4 I did have to re-enable the Reader Internet Preference to allow the pdf to display within the browser. You can check that setting in your Reader preferences but I don't think that is your problem. When it was off I was prompted to intall Reader, it did not try to open the Workspace pdf outside of Workspace.
What is the zoom setting on your browser? I believe there is a problem if the zoom level on I.E. 8 is more than 100%. If it is higher try setting it to 100%, closing your browser and then try opening the Workspace task again.
Hope that helps.

Scrollable Frame issue on iPad 'Adobe Viewer'

I'm wondering if anyone else has this issue when previewing a folio with the iPad viewer.
The issue is when I have a full (or even part) page scrollable frame on a page and once I have vertically swiped/scrolled to the end of the scrollable frame, then the next vertical swipe seems to stick much more than usual and requires a much longer/sustained swipe to get it to move on to the next page.
This issue is only occuring when previewing a folio on the iPad viewer. It behaves as expected (short normal swipes) when previewed on the Desktop 'Content Viewer'. It also behaves as expected when simply previewing from the Folio Overlays panel – both on the Desktop viewer and iPad viewer. It also behaves if I import the article as PNG format into a folio, however I am requiring vector quality/display for this project so can't ignore the issue.
It also does not fix the issue to select 'raster' rather than 'vector' in export options within the 'scrollable frame' folio overlay panel.
My first thought was that maybe this is just a quirk of the iPad viewer, but the fact that the behaviour works in most other scenarios has me guessing. Maybe i am missing something somewhere which may explain this. I see the use of Scrollable Frames in this manner within many apps (in vector/PDF) without experiencing this issue, hence why I am leaning towards it being a quirk of the viewer when as a folio with a PDF scrollable frame.
I am using the latest viewers (Desktop and iPad app). The folio's tested trying to resolve this issue have been in both v26 and v27. Using InDesign CS6 on Mac. Same issue happens whether iPad is horizontal or vertical.
Please let me know if you need any further details on my setup or what i have been testing if that will help.
Thanks
Ross

i had this problem once, in the folio producer have you given the folio a name, number and description?
also in the viewer on the ipad they are not nessecarily in the right order - so scoot about on it
if all else fails, delete the folio and re-upload, we had a glitch once and the only solution was to re upload
Tim

LAF Package Table Frame Issues

I have successfully implemented Francois' LAF package (Thanks very much, Fancois!) and
am adapting the functionality to make our forms look more web-like, but I am having a few
problems.
First, I am having a problem where the table frames (header and body frames) are either
vertically off or are vertically stretched. In the case where they are vertically off, I have a
single table block with 14 rows and a vertical scrollbar. The frame is about an inch
higher than it should be to line up with the table. In the case where the frames are
stretched, I have 2 different database blocks on the same canvas with a vertical scrollbar
controlling both and a horizontal scrollbar controlling one.
Second, and this seems to be pretty basic (I should probably know how to do this after
almost 10 years of Forms work). We use text items with no bevel to display the version
of the software, user ID, database host, and login time on each canvas. These items
have a gray background and they stand out like sore thumbs on the fancy new
gradient-enriched canvas. I'd love to find a way where I could just show the text without
having a background color so it would behave like boilerplate text.
Any help is appreciated. Thanks!

Francois,
We have the same issues. I pointed them out in mt previous post related to Display Items. They don't have an implementation class ... That will be an issue.
The only way to fix it is to turn them into TextItem.
We also have an issue with Gradient Color ---> experience some flickering effect.
First we see the default color and then the Gradient Color. This is only on when loading the form, it's fine when we switch the canvases already inside the form.
The third issue is with Tabs. When the Gradient Color applied we see some default coloring around tabs.
I feel that in conflict with the default Oracle's code at init() event. I do agree with you that this is the Open Source Project. But Oracle's Code is not an open source.
Please advise.
Thanks,
Michael

Frame issue

Hi ,
When putting the Frame the Report is not able to generate in delimited format i am Getting error 'Terminated with error" (Report is Generating other than delimited)
Any one please advice ...
Thanks...
Regards
sathi

Hello Mujno,
To fix this issue, you need to determine how you are navigating between pages. Are you navigating between multiple pages within a page (like html iframe) or navigating from one page window to another. The Frame control helps keep track of
the page navigations.
Here's what you can try per scenario:
1) Navigating between pages within a page
- You would have to include a frame control on all pages that use your reusable class. The frame control would be a container for any page that you want to navigate and display the content. I doubt this is what you are doing but figured it's worth mentioning.
- You can use the "this.Frame.Navigate(.....)" after including the frame control on the page. Note that "Frame" is the name of the frame object.
2) Navigating from one page window to another
- You can navigate to another page from your reusable class by instantiating a new frame from the current window.
Frame rootFrame = Window.Current.Content as Frame;
rootFrame.Navigate(typeof(Object), Object);
Let me know if this helps.
Abdulwahab Suleiman

Flash CS 4 to Quicktime frame issues

I'm rendering short (3 min.) Flash movies to Quicktime. The
movies are H.264, 1280 x 720, 15 fps, and I'm working on the
fastest machine Apple currently makes. Flash can't seem to complete
the task, as it leaves artifacts from earlier frames in subsequent
frames. It's very annoying.
Is there a setting I can tweak that will make this program do
what I bought it for?
Thanks in advance for any help.
Jody Radzik
Institute for the Future

You appear to be discussing features built-in to Dreamweaver that involve Flash content, so you may get better information from the Dreamweaver forum in regards to using these feaures.
It is unlikely that Dreamweaver 2004 would be compatible with Flash CS4, though compatibility is not really an issue since Flash has little use for Dreamweaver to do nything it needs to, and Dreamweaver is pretty much just a fancified text editor, where if you needed to incorporate Flash CS4 content you could have Flash publish the html code and then paste that code into the html file in Dreamweaver.

Premiere Pro 1.5 - dropped frame issue

First let me say I know this program is out dated so let's not get into that. (or maybe we will) The company I work for is small and just can't afford to upgrade. So, as I am stuck with this program there have been reoccuring issues with dropped frames.
I use a PD-150 and/or DVX-100 to shoot. I used a mini-DV deck to capture to the system via firewire. I noticed that there were several random dropped frames throughout the show. (The show being a dance recital) The big hassle is that it is a two camera show and so everytime I think I have the cameras matched up, oh gee great, there's a nother dropped frame. I then recaptured the tapes from the camera that they were shot in. Same problem, only the dropped frames were in different areas. Does this mean that the tape is not damaged? That it did not occur during filming? Is it a problem with the capturing device? We have a Matrox system. I am also capturing to an external harddrive. Firewire. But this has happened when I've used the computer hard drives for project space. So, I'm not sure if that would make a diffrence.
Basically, wtf can I do to stop dropped frames?
Is it the video card? capturing system?
Do we really just need to upgrade our software to solve the issue?
If indeed there is a solution, would I have to recapture everything in order to get rid of the dropped frames?
Help please! Thanks!
Kip

Recapture to a internal drive is your best option imo.

Place frame issue

Similar Messages

Maybe you are looking for